Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Your Porsche
SOUL Performance Products
SOUL Performance Products for Porsche
SOUL Performance Products deliver premium exhausts, headers, and performance upgrades for Porsche and other high-end sports cars. Built with aerospace-grade precision and backed by a lifetime warranty, SOUL parts enhance sound, power, and reliability—perfect for both street and track
A Quick Look at SOUL Performance Products
SOUL Performance Products information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where SOUL Performance Products is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose SOUL include upgrading to a high-quality exhaust with a well-judged sound, stronger fabrication, reduced weight, and better response, with systems designed around Porsche fitment and heat management.
- Common issues to watch for on any performance exhaust setup include drone (depending on configuration), rattles from loose clamps or contact with heatshields, exhaust leaks, and fitment problems caused by worn mounts or reusing old hardware.
- Practical tip: configuration strongly affects loudness; valved and/or resonated systems are usually more daily-driver friendly.
- Practical tip: replace mounts and clamps where possible, check clearances both cold and hot, and re-torque fixings after a few heat cycles.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Exhausts — Exhaust systems are usually changed to replace corroded or leaking parts, to alter sound, reduce weight, or improve flow for tuned engines. For Porsche models this often means choosing a system that delivers the desired tone without excessive drone, and that matches your emissions and fitment requirements.
- When changing an exhaust, it is wise to budget for fresh gaskets, clamps, mounts, and any rusted fixings to avoid leaks and rattles.
- Check local regulations and MOT/emissions requirements before choosing systems that alter catalytic converters or overall noise level.
Sport Silencers / Mufflers — Sport silencers are typically fitted to sharpen throttle response slightly and, more noticeably, to increase exhaust character. Porsche owners use this category to find a sportier, more engaging sound while aiming to keep drone and long-distance cruising noise under control.
- To minimise drone, choose a design known for good acoustic tuning and match it carefully with the rest of the exhaust system.
- If you are adding other flow-improving parts later, consider how the silencer choice will work with those changes.
Switchable Silencers / Mufflers — Switchable silencers use valves to give a quieter mode for neighbourhoods and motorways, with a louder, freer-flowing mode on demand. They are popular on Porsches that need to balance early-morning starts and long trips with the desire for a more aggressive sound when conditions allow.
- Plan the full valve control setup in advance, including any vacuum lines, solenoids, or electronic controllers needed for retrofit applications.
- Periodically check valve mechanisms and actuators for sticking, rattles, or leaks so both quiet and loud modes work correctly.
All Silencers / Mufflers — This category brings together standard, sport, and switchable layouts so you can compare options when you are unsure which configuration your Porsche currently has. Owners use it when tackling corrosion, unwanted noise or drone, or when deciding how far to upgrade sound and character.
- Identify your existing layout by counting inlets/outlets and checking pipe diameters and hanger positions before ordering replacements.
- When refreshing silencers, also inspect hangers, brackets, and clamps so the new system sits correctly and avoids vibration or contact with the bodywork.
SOUL Performance Products — SOUL Performance Products offer high-quality exhaust systems, headers, and performance upgrades engineered for Porsche and other premium sports cars. Each component is built with aerospace-grade precision, with attention to tone, fitment, and heat management for road and track use.
- Cat-back SOUL systems generally do not require engine tuning; changing cats or headers may benefit from, or require, appropriate mapping depending on the overall setup.
- When fitting SOUL components upstream (cats/headers), ensure sensor and catalyst compatibility is correct for your specific Porsche model and emissions requirements.
Explore SOUL Performance Products at Design911
View the current SOUL Performance Products range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
The SOUL Performance Competition Headers are premium aftermarket performance exhaust manifolds developed specifically for Porsche 987.1 Boxster and Cayman models manufactured between 2005 and 2008.
Fits:
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Designed for Porsche's naturally aspirated flat-six engines, these headers replace the original exhaust manifold and primary catalytic converter assemblies with a high-flow stainless steel system intended for track and competition applications.
The original Porsche exhaust manifolds incorporate catalytic converters to treat exhaust emissions. Although essential for emissions control, these components can introduce resistance to exhaust gas flow.
SOUL Performance developed its Competition Headers to provide a less restrictive exhaust path using carefully engineered primary runners, smooth-radius bends and optimised collectors.
Manufactured from 14–16 gauge T304L stainless steel tubing, the headers provide corrosion resistance and durability under demanding exhaust operating temperatures.
Each header incorporates port-matched cylinder-head flanges to provide an accurate transition between the engine's exhaust ports and the primary tubes.
The primary runners are mandrel-bent to maintain a smooth internal gas path, while the collectors are designed to improve how the individual exhaust streams combine.
This construction aims to support improved exhaust scavenging, sharper throttle response and increased performance potential.
The removal of the factory catalytic converters also produces a more pronounced exhaust sound, allowing more of the engine's naturally aspirated flat-six character to be heard.
What This Product Does:
Exhaust headers collect combustion gases from the engine's cylinder heads and direct them towards the remainder of the exhaust system.
On the Porsche 987.1 Boxster and Cayman, the original exhaust manifolds incorporate primary catalytic converters.
The SOUL Competition Headers replace these assemblies with freer-flowing stainless steel pipework.
Their main functions include:
- Collecting exhaust gases: Direct spent combustion gases away from the cylinder heads.
- Improving exhaust flow: Provide smoother passages intended to reduce unnecessary restrictions.
- Supporting exhaust scavenging: Use primary runner and collector geometry to improve exhaust gas movement.
- Reducing exhaust restriction: Remove the original primary catalytic converters from the exhaust path.
- Supporting engine performance: Help the naturally aspirated flat-six engine breathe more efficiently.
- Enhancing throttle response: Support improved engine responsiveness during acceleration.
- Increasing performance potential: Provide an exhaust configuration suitable for performance-focused engine setups.
- Enhancing exhaust sound: Produce a louder and more pronounced flat-six soundtrack.
- Reducing exhaust assembly weight: Eliminate the heavy original primary catalytic converter assemblies.
- Supporting motorsport reliability: Replace factory manifold assemblies that have experienced cracking or catalyst core damage in competition use.
- Providing corrosion resistance: Use T304L stainless steel construction.
- Maintaining downstream connection: Attach to the compatible rear exhaust system.
Why Upgrading Matters:
1. Improved Exhaust Flow
The smooth-radius stainless steel runners and optimised collectors are designed to reduce unnecessary flow restriction.
This helps exhaust gases leave the cylinder heads more efficiently.
2. Reduced Backpressure
The headers eliminate the factory primary catalytic converters, removing a source of exhaust restriction.
This makes them suitable for legally permitted competition applications where emissions requirements differ from public-road use.
3. Increased Performance Potential
More efficient exhaust flow may support improved engine breathing and stronger performance.
Actual horsepower and torque gains depend on the engine, ECU calibration, rear exhaust system and other modifications.
No specific numerical performance gain is guaranteed.
4. Improved Throttle Response
Reduced exhaust restriction may help the engine respond more readily to accelerator input.
This can be particularly valuable during high-load driving and rapid acceleration.
5. Enhanced Flat-Six Exhaust Sound
The removal of the original catalytic converters allows more exhaust sound to pass through the system.
This produces a louder, more aggressive flat-six soundtrack.
The final sound depends on the installed rear exhaust.
6. Competition-Focused Durability
SOUL developed the headers partly to address cracking and catalyst core failures reported in Spec Cayman racing.
The stainless steel construction eliminates the primary catalytic converter core as a potential failure point.
7. Potential Weight Reduction
The Competition Headers replace the original manifold and catalytic converter assemblies with stainless steel headers.
SOUL identifies weight reduction as a benefit, although an exact verified weight saving is not provided in the main product specification.
8. High-Quality Stainless Steel Construction
T304L stainless steel offers corrosion resistance and durability under repeated exhaust temperature changes.
9. Direct Bolt-On Installation
The headers are designed for direct replacement of the compatible factory manifold assemblies.
Each set is fixture-tested before dispatch and supplied with fitting instructions.
10. Motorsport Applications
The headers were accepted under published 2020 PCA Spec Cayman competition regulations.
Drivers preparing vehicles for regulated competition must check the latest championship rules before ordering.
11. Manufacturer Lifetime Warranty
SOUL Performance provides a lifetime warranty for its headers, including track use, subject to the applicable warranty terms.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.9871.COH
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
The SOUL Performance Long Tube Street Headers are premium aftermarket performance exhaust manifolds developed specifically for Porsche 987.1 Boxster and Cayman models manufactured between 2005 and 2008.
Fits:
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Designed for Porsche's naturally aspirated flat-six engines, these headers replace the original exhaust manifold and primary catalytic converter assemblies with a stainless steel long-tube design incorporating HJS 200-cell high-flow catalytic converters.
The factory Porsche exhaust system is engineered to balance engine performance, emissions requirements, manufacturing costs and everyday driving refinement.
SOUL Performance developed its Long Tube Street Headers to improve the efficiency of the exhaust gas path while retaining catalytic exhaust treatment.
Each header incorporates 1.75-inch primary runners, carefully developed collector geometry and merge spikes designed to create a smoother transition as exhaust gases combine.
The long-tube construction is engineered to improve exhaust scavenging and support more efficient engine breathing.
By improving the movement of exhaust gases away from the cylinder heads, the headers are intended to enhance throttle response, support engine performance and produce a more distinctive naturally aspirated flat-six soundtrack.
The system is manufactured from T304L stainless steel, offering corrosion resistance and durability under demanding exhaust temperatures.
Precision waterjet-cut mounting flanges provide accurate attachment to the cylinder heads, while the internal collector design helps minimise unnecessary turbulence.
A distinguishing feature of these headers is the use of HJS 200-cell high-flow catalytic converters.
These catalysts are designed to combine effective exhaust gas treatment with reduced flow restriction.
HJS uses a double-foil wound catalyst substrate construction intended to improve strength and durability under repeated thermal cycling.
SOUL states that these converters are capable of meeting Euro 3 emissions performance requirements and are designed to reduce the likelihood of triggering a catalyst-related engine warning light.
However, this manufacturer statement should not be interpreted as proof that the complete exhaust modification is certified or road legal for every vehicle and jurisdiction.
Each header set is manufactured and quality-checked at SOUL Performance's Willow Grove, Pennsylvania facility.
The assemblies are tested in a precision fixture to maintain fitment accuracy and prevent fabrication distortion.
The headers are designed as a direct bolt-on replacement for the corresponding factory components, with new high-grade hardware supplied for the header-to-exhaust flange connections.
Backed by SOUL Performance's lifetime warranty, subject to the manufacturer's conditions, these headers provide a performance-focused upgrade for Porsche owners seeking improved exhaust flow, sharper throttle response and a more engaging engine sound.
What This Product Does:
Exhaust headers collect spent combustion gases from the engine's cylinder heads and direct them into the downstream exhaust system.
The Porsche 987.1 Boxster and Cayman use naturally aspirated flat-six engines in which exhaust runner length, diameter and collector geometry can influence engine breathing and power delivery.
The SOUL Performance Long Tube Street Headers provide an alternative exhaust gas path using longer runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
- Collecting exhaust gases: Direct gases away from the engine's cylinder heads.
- Improving exhaust flow: Provide smoother and more efficient gas passages.
- Supporting exhaust scavenging: Use long primary runners and collector geometry to encourage efficient exhaust pulse movement.
- Enhancing throttle response: Help the engine respond more effectively during acceleration.
- Supporting engine performance: Reduce unnecessary exhaust restriction.
- Improving exhaust pulse transition: Use merge spikes within the collectors to smooth gas flow.
- Retaining catalytic treatment: Incorporate HJS high-flow catalytic converters.
- Reducing catalyst restriction: Use 200-cell catalyst substrates designed for efficient gas movement.
- Enhancing exhaust sound: Produce a richer and more pronounced flat-six tone.
- Supporting high-temperature durability: Use T304L stainless steel construction.
- Maintaining downstream exhaust connections: Attach to compatible factory or aftermarket rear exhaust components.
- Preserving fitment accuracy: Use precision-cut flanges and fixture-tested construction.

Why Upgrading Matters:
1. Improved Exhaust Gas Flow
The long-tube runners and optimised collectors are designed to provide a smoother route for exhaust gases leaving the engine.
This helps reduce unnecessary restriction and supports efficient engine breathing.
2. Enhanced Throttle Response
Improved exhaust flow and scavenging can support more responsive engine behaviour.
Drivers may notice a more immediate engine response during acceleration, depending on the overall vehicle configuration.
3. Increased Performance Potential
SOUL Performance developed the header runner dimensions and collectors to help extract additional performance from the 987.1 flat-six engines.
The manufacturer specifically highlights benefits for the 3.4L engine and improvements for the 2.7L engine.
Specific horsepower or torque increases have not been established from the official product specification for every engine variant. No numerical gain should be guaranteed without appropriate dynamometer testing.
4. Enhanced Flat-Six Exhaust Sound
The header design changes the movement of exhaust pulses through the system.
This can produce a fuller, richer and more sporting engine note.
The final sound depends on the original or aftermarket rear exhaust fitted.
5. HJS High-Flow Catalytic Converters
The integrated 200-cell HJS catalysts are designed to retain exhaust gas treatment while reducing restriction.
This is a key distinction from catalyst-free competition headers.
6. High-Quality Stainless Steel Construction
The T304L stainless steel construction offers corrosion resistance and durability in high-temperature exhaust applications.
The components are designed to withstand repeated heating and cooling cycles.
7. Optimised Collector Geometry
SOUL incorporates merge spikes within the collectors to improve exhaust gas transition.
This helps reduce turbulence where the primary runners combine.
8. Precision Mounting Flanges
Waterjet-cut mounting flanges are designed to provide accurate fitment and secure attachment to the cylinder heads.
Correct flange alignment is essential for preventing exhaust leaks.
9. Direct Bolt-On Installation
The headers are developed for the original mounting arrangement of compatible Porsche 987.1 vehicles.
SOUL tests each set in a fitting fixture to maintain dimensional accuracy.
10. Long-Term Durability
The stainless steel construction and HJS catalyst design are intended to provide resistance to corrosion, thermal stress and repeated exhaust temperature changes.
11. Manufacturer Lifetime Warranty
SOUL Performance backs the headers with a lifetime warranty for street and track use, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.9871.STH
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
The SOUL Performance Long Tube Street Headers are high-performance aftermarket exhaust manifolds developed specifically for Porsche 987.2 Boxster and Cayman models manufactured between 2009 and 2012.
Fits:
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Designed for the naturally aspirated 2.9-litre and 3.4-litre flat-six engines, these headers replace the original Porsche exhaust manifold and catalytic converter assemblies with a freer-flowing stainless steel design incorporating high-flow catalytic converters.
The factory exhaust system is engineered to balance performance, emissions control, noise regulations and everyday usability. SOUL Performance developed its Long Tube Street Headers to improve exhaust gas flow and enhance the engine's characteristic sound while retaining catalytic exhaust treatment.
Each header features 2-inch primary runners, carefully formed bends, port-matched mounting flanges and optimised exhaust collectors.
The long-tube design is intended to help exhaust gases leave the cylinder heads more efficiently, supporting improved engine breathing and throttle response.
The headers are manufactured from T304L stainless steel, providing corrosion resistance, strength and durability under demanding exhaust operating temperatures.
Large-diameter, free-flowing catalytic converters are incorporated into the assemblies to reduce exhaust restriction compared with the manufacturer's intended factory baseline while retaining a catalytic treatment stage.
Unlike catalyst-free Competition Headers, the SOUL Long Tube Street Headers maintain catalytic converters within the exhaust system.
They are specifically developed for the Porsche 987.2 platform, with the primary runner diameter and collector geometry selected to complement the performance characteristics of both the 2.9L and 3.4L engines.
SOUL Performance reports dynamometer testing on its project Cayman S equipped with PDK transmission and a compatible SOUL Valved Exhaust System.
The manufacturer recorded improvements in wheel horsepower and torque around 4,100 RPM, although the figures published in different sections of its product page vary.
In addition to improved exhaust flow, the headers are designed to produce a stronger, fuller and more distinctive flat-six exhaust note.
The final sound depends on the installed rear exhaust system, engine specification and driving conditions.
Each header assembly is quality-checked, tested in an installation fixture and supplied with fitting instructions.
New high-grade hardware for the header-to-exhaust flange connections is included.
SOUL Performance also offers an optional copper exhaust header gasket set for installation.
The system is designed as a direct bolt-on replacement for the compatible original exhaust manifold arrangement, without requiring bespoke fabrication in a standard installation.
Backed by the SOUL Performance lifetime warranty, subject to the manufacturer's conditions, these headers provide an attractive upgrade for enthusiasts seeking improved exhaust flow, enhanced throttle response and a more engaging engine soundtrack.
What This Product Does:
Exhaust headers collect combustion gases from the engine's cylinder heads and direct them towards the remainder of the exhaust system.
The Porsche 987.2 Boxster and Cayman use naturally aspirated flat-six engines, where efficient exhaust gas movement is important for engine breathing and power delivery.
The SOUL Long Tube Street Headers replace the original manifold and catalytic converter assemblies with longer primary runners and improved collector geometry.
Their main functions include:
- Collecting exhaust gases: Direct gases away from the engine's cylinder heads.
- Improving exhaust flow: Provide smoother internal passages to reduce unnecessary restriction.
- Supporting exhaust scavenging: Use runner length and collector design to encourage efficient exhaust pulse movement.
- Enhancing throttle response: Support improved engine responsiveness during acceleration.
- Increasing performance potential: Help the engine breathe more efficiently, particularly under load.
- Supporting mid-range performance: Provide an exhaust arrangement developed to improve torque delivery.
- Enhancing flat-six sound: Produce a fuller and more pronounced exhaust note.
- Retaining catalytic treatment: Pass exhaust gases through integrated high-flow catalytic converters.
- Reducing exhaust restriction: Use large-diameter catalysts and smooth-flowing tubing.
- Maintaining downstream connections: Connect to a compatible rear exhaust system.
- Providing durable construction: Use corrosion-resistant T304L stainless steel.
- Supporting performance modifications: Complement compatible rear exhaust upgrades and appropriate engine tuning.

Why Upgrading Matters:
1. Improved Exhaust Gas Flow
The headers use long primary runners, smooth-radius tubing and optimised collectors to improve exhaust gas movement away from the cylinder heads.
This helps reduce unnecessary restriction in the exhaust path.
2. Improved Throttle Response
SOUL designed the header geometry to support more responsive engine behaviour.
Improved exhaust flow may be noticeable during acceleration, particularly as engine speed increases.
3. Increased Performance Potential
SOUL Performance reports dyno testing on a Porsche 987.2 Cayman S equipped with PDK transmission and its Valved Exhaust System.
The manufacturer publishes gains around 4,100 RPM, with figures ranging from 7–8 wheel horsepower and 8–11 lb-ft of torque in different sections of the listing.
These are manufacturer-reported results for the tested configuration, not guaranteed gains from the headers alone.
4. Enhanced Flat-Six Exhaust Sound
The long-tube design changes the movement of exhaust pulses through the system.
This is intended to produce a fuller, more pronounced engine note, particularly during acceleration and higher engine speeds.
5. High-Flow Catalytic Converter Design
The headers incorporate large-diameter catalytic converters designed to provide an improved flow path while retaining catalytic exhaust treatment.
They are distinct from SOUL's catalyst-free Competition Headers.
6. Durable Stainless Steel Construction
T304L stainless steel offers corrosion resistance and suitability for repeated high-temperature operation.
The components are quality-checked before dispatch.
7. Weight Reduction Potential
SOUL reports a lower header weight than the original factory assemblies.
The manufacturer lists 26.25 lb for the factory headers and 24.45 lb for the SOUL headers, indicating a total reduction of approximately 1.8 lb (0.82 kg).
The listing also gives an inconsistent metric conversion, so the imperial figures should be used if quoting the manufacturer's weights.
8. Direct Bolt-On Installation
The headers are designed for the original compatible mounting arrangement.
SOUL checks each set in an installation fixture and includes fitting instructions.
9. Compatibility with Performance Exhaust Systems
The headers can be paired with the manufacturer's compatible Valved Exhaust System or other suitable downstream exhaust arrangements, subject to fitment verification.
10. Manufacturer Lifetime Warranty
SOUL Performance provides a lifetime warranty for its exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.9872.STH
The product you are viewing cross references to these numbers
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
The SOUL Performance Exhaust System is a premium aftermarket sports exhaust upgrade designed specifically for the Porsche 987.2 Boxster and Cayman models manufactured between 2009 and 2012.
Fits:
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Developed for Porsche's naturally aspirated flat-six engines, this system replaces the original rear exhaust assembly with a high-quality stainless steel exhaust featuring free-flowing pipework, performance silencers and a choice of premium exhaust tips.
The factory Porsche Boxster and Cayman exhaust is designed to balance engine performance, exhaust emissions, noise restrictions and everyday comfort. However, its relatively small pipework and substantial silencer assembly can limit the volume and character of the engine's natural exhaust note.
SOUL Performance developed this system to deliver a fuller, deeper and more engaging flat-six soundtrack without the excessive cabin resonance often associated with less refined aftermarket exhausts.
The system uses mandrel-bent T304L stainless steel tubing, designed to maintain a smooth exhaust gas path through bends and reduce unnecessary flow restriction.
Its specially developed silencers incorporate sound-absorbing materials intended to minimise undesirable drone and rasp, particularly during steady-speed cruising.
Unlike the manufacturer's separate Valved Exhaust System, this version does not incorporate electronically controlled exhaust valves.
Instead, it delivers a consistently sporty exhaust tone, similar in character to the open-valve mode of SOUL's valved system.
SOUL states that the exhaust produces a greater volume than the original Porsche Sport Exhaust (PSE) with its valves open, while retaining a refined exhaust character.
The construction incorporates reinforced silencer casings and strengthened exhaust mounting brackets, designed to provide durability during repeated heating and cooling cycles, everyday driving and demanding track use.
A choice of premium exhaust tips allows owners to personalise the rear appearance of their Porsche.
Available options include different styles and finishes of 321 stainless steel exhaust tips, alongside lightweight single-wall titanium tips.
The titanium tip option offers a weight saving of nearly one pound compared with the equivalent stainless steel tips, according to SOUL Performance.
Each exhaust assembly is quality-checked and tested in a dedicated fitting fixture before dispatch to ensure consistent installation fitment.
The system is designed for direct bolt-on installation and includes new high-grade hardware for the exhaust header flange connections, together with comprehensive installation instructions.
Backed by SOUL Performance's lifetime warranty, subject to the manufacturer's published terms, this exhaust is ideal for Porsche owners seeking a more distinctive flat-six sound, durable stainless steel construction and a simple, non-valved performance exhaust arrangement.
What This Product Does:
The SOUL Performance Exhaust System carries exhaust gases from the engine's upstream exhaust components through the rear exhaust assembly and directs them towards the exhaust outlets.
During engine operation, combustion gases leave the cylinder heads and pass through the exhaust manifolds and catalytic converters.
The gases then enter the rear exhaust, where the tubing and silencers influence exhaust flow and sound.
The SOUL system uses free-flowing stainless steel pipework and specially developed mufflers to balance strong exhaust sound with controlled resonance.
Its main functions include:
- Directing exhaust gases: Carries spent combustion gases towards the rear outlets.
- Supporting exhaust flow: Uses mandrel-bent tubing to provide a smooth gas path through the rear exhaust.
- Enhancing engine sound: Produces a deeper, fuller and more sporting flat-six exhaust note.
- Reducing unwanted drone: Incorporates silencers designed to minimise low-frequency cabin resonance.
- Controlling exhaust rasp: Helps reduce harsh or undesirable high-frequency exhaust sounds.
- Providing consistent exhaust character: Delivers a fixed sporting tone without selectable exhaust valves.
- Maintaining durable exhaust construction: Uses corrosion-resistant stainless steel and reinforced silencer housings.
- Supporting secure installation: Incorporates strengthened brackets designed for extended road and track use.
- Enhancing rear-end styling: Offers a selection of exhaust tip designs and finishes.
- Complementing performance upgrades: Designed to work with compatible aftermarket exhaust headers.
- Retaining compatible upstream components: Allows the original exhaust manifolds and catalytic converters to remain fitted.

Exhaust Sound Characteristics:
SOUL Performance developed this system to provide a more aggressive exhaust note without the harshness or constant resonance of a completely unrestricted rear exhaust.
The manufacturer describes the sound as similar to its Valved Exhaust System with the valves open.
Owners may notice:
- A deeper exhaust tone at idle.
- A fuller flat-six soundtrack during acceleration.
- Increased sound intensity at higher engine speeds.
- More pronounced engine character during downshifts.
- A stronger exhaust note under heavy throttle.
- A more sporting sound than the standard Porsche rear exhaust.
- Reduced unwanted drone compared with less effectively silenced performance exhausts.
- A more refined tone than an unsilenced race exhaust.
Why Upgrading Matters:
1. Enhanced Flat-Six Engine Sound
The naturally aspirated engines fitted to Porsche 987.2 Boxster and Cayman models produce a distinctive flat-six soundtrack.
The SOUL exhaust is designed to emphasise this character, delivering a deeper and more engaging note during acceleration and high-RPM driving.
2. Consistently Sporting Exhaust Tone
Unlike a valved system, this exhaust does not require the driver to select a louder sound mode.
It provides its performance exhaust character whenever the engine is running.
3. Reduced Unwanted Drone and Rasp
SOUL's specially developed silencers aim to minimise unwanted resonance and harsh exhaust tones.
This provides a more refined alternative to unsilenced or poorly matched aftermarket systems.
4. Improved Exhaust Flow Potential
The system uses mandrel-bent stainless steel pipework designed to reduce unnecessary restrictions.
This may complement other appropriate performance modifications.
However, specific horsepower and torque gains have not been verified for this exhaust alone.
5. Durable Stainless Steel Construction
T304L stainless steel offers corrosion resistance and durability under repeated exhaust heating and cooling cycles.
The reinforced silencer casings are designed for long-term use.
6. Strengthened Exhaust Mounting Brackets
Exhaust mounts experience vibration, thermal expansion and mechanical stress during driving.
SOUL incorporates reinforced brackets intended to reduce the risk of cracking or failure during road and track use.
7. Simpler Non-Valved Design
The absence of exhaust valves reduces the number of moving components within the replacement rear exhaust.
This can appeal to owners who prefer a simpler performance exhaust configuration.
8. Premium Exhaust Tip Options
The system is available with a choice of stainless steel and titanium exhaust tips.
Different styles and finishes allow the owner to personalise the vehicle's rear appearance.
9. Direct Bolt-On Installation
The exhaust is designed for installation using the original compatible vehicle mounting arrangement.
SOUL quality-checks and fixture-tests the assembly before dispatch.
10. Compatibility with Performance Headers
The system is designed to work with suitable factory and aftermarket header arrangements.
Its silencers aim to control unwanted resonance, even when a freer-flowing upstream exhaust system is fitted.
11. Manufacturer Lifetime Warranty
SOUL Performance provides a lifetime warranty for its exhaust components, subject to the applicable warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.9872.ESX.
The product you are viewing cross references to these numbers
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
The SOUL Performance Race Exhaust System is a premium aftermarket motorsport exhaust developed specifically for the Porsche 981 Cayman GT4 and Boxster Spyder models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this exhaust replaces the original rear exhaust assembly with a lightweight, high-flow stainless steel system engineered for demanding circuit driving and motorsport applications.
Unlike conventional sports exhaust systems, which balance performance, refinement and everyday comfort, the SOUL Race Exhaust is developed primarily to deliver maximum durability, reduced weight, efficient exhaust flow and a highly aggressive engine soundtrack.
The system uses 2.5-inch diameter T304L stainless steel tubing, manufactured with precision mandrel bends to maintain a consistent flow path through the exhaust system.
The tubing has a 0.065-inch wall thickness, providing a balance of strength, durability and lightweight construction.
Each system is manufactured in-house at SOUL Performance's Willow Grove, Pennsylvania facility, where the components are carefully fabricated and inspected.
The stainless steel brackets are laser-cut, press-brake formed and TIG-welded for strength, while the exhaust welds are back-purged to support long-term durability under demanding conditions.
One of the system's most distinctive features is its specially developed mounting arrangement.
Instead of relying exclusively on conventional exhaust hangers welded directly to the pipework, SOUL uses a bespoke transmission mounting brace, heavy-duty Mikalor band clamps and additional rubber vibration dampeners.
This construction is designed to reduce stress caused by engine movement, exhaust vibration and repeated thermal expansion.
SOUL states that its mounting arrangement saves over 5 lb (approximately 2.3 kg) compared with the original factory exhaust mounts.
The over-axle pipe geometry is also designed to provide sufficient clearance around the rear axles and anti-roll bar drop links, including on vehicles with lowered or modified suspension.
This is particularly relevant to track-prepared Porsche GT4 models, where aftermarket suspension setups may reduce available exhaust clearance.
The system is compatible with the original factory headers and SOUL Performance headers.
Compatibility with exhaust headers produced by other manufacturers must be checked carefully because dimensional differences may affect over-axle pipe clearance.
The SOUL Race Exhaust produces an exceptionally loud and aggressive exhaust note, emphasising the distinctive character of the Porsche naturally aspirated flat-six engine.
Its reduced sound attenuation produces a much more direct exhaust experience than the manufacturer's Performance Exhaust or Valved Exhaust systems.
SOUL explicitly states that exhaust drone will be present, even when resonators are used.
For this reason, the Race Exhaust is best suited to dedicated circuit cars, competition vehicles and other legally permitted off-road applications rather than everyday road use.
The exhaust is designed for direct bolt-on installation on compatible vehicles and includes new high-grade hardware for the header-to-exhaust flange connections.
Each assembly undergoes quality checks and fixture testing before dispatch.
Backed by SOUL Performance's lifetime warranty, subject to the manufacturer's terms, the Race Exhaust System provides a purpose-built solution for Porsche enthusiasts seeking reduced mounting weight, motorsport durability and an exceptionally aggressive flat-six soundtrack.
What This Product Does:
The SOUL Race Exhaust System directs spent combustion gases away from the engine's upstream exhaust components and through the rear exhaust outlets.
After combustion, exhaust gases leave the engine through the exhaust manifolds and associated catalytic converter assemblies, where fitted.
The gases then pass through the over-axle exhaust pipes and towards the rear outlets.
The SOUL Race Exhaust provides a performance-focused alternative to the original rear silencer arrangement.
Its main functions include:
- Directing exhaust gases: Carries combustion gases from the upstream exhaust system towards the rear outlets.
- Supporting efficient exhaust flow: Uses mandrel-bent stainless steel tubing with a 2.5-inch diameter.
- Reducing unnecessary restriction: Employs a race-focused flow path rather than a heavily silenced factory-style rear exhaust.
- Enhancing engine sound: Produces a substantially louder and more aggressive naturally aspirated flat-six soundtrack.
- Reducing mounting weight: Uses a bespoke mounting system that saves over 5 lb compared with the factory mounts.
- Supporting motorsport durability: Incorporates reinforced mounting components developed for demanding circuit operation.
- Reducing mounting stress: Uses heavy-duty clamps and rubber vibration dampeners to manage vibration and movement.
- Maintaining suspension clearance: Features over-axle pipework shaped to clear the axles and anti-roll bar drop links.
- Accommodating modified suspension: Provides pipe profiles developed with lowered and track-prepared vehicles in mind.
- Supporting repairability: Uses mounting components designed to be serviced or replaced after motorsport incidents.
- Providing corrosion resistance: Uses T304L stainless steel for repeated exposure to heat and environmental conditions.
- Maintaining compatible header connections: Connects to the original Porsche or suitable SOUL Performance exhaust headers.
Exhaust Sound Characteristics:
The SOUL Race Exhaust is designed for drivers who want an exceptionally loud and aggressive exhaust note.
It provides a much less attenuated soundtrack than the original Porsche rear exhaust.
Depending on the engine speed, upstream exhaust configuration and driving conditions, drivers may notice:
- A noticeably louder exhaust tone at idle.
- A very aggressive exhaust note during acceleration.
- Increased flat-six sound intensity at higher engine speeds.
- Stronger exhaust presence during gear changes and downshifts.
- Pronounced exhaust character during high-load circuit driving.
- Increased cabin resonance.
- Noticeable low-frequency exhaust drone.
- A more direct motorsport-style exhaust soundtrack.
Why Upgrading Matters:
1. Motorsport-Focused Construction
The Race Exhaust is designed specifically for demanding track applications.
Its reinforced components and specialised mounting arrangement are intended to withstand the stresses associated with aggressive circuit driving.
2. Reduced Exhaust Restriction
The system uses mandrel-bent 2.5-inch exhaust tubing and a freer-flowing rear exhaust arrangement.
This supports efficient movement of exhaust gases through the system.
However, specific horsepower or torque gains for this exhaust alone have not been independently confirmed.
3. Reduced Mounting Weight
SOUL states that its bespoke mounting arrangement saves more than 5 lb compared with the original factory mounts.
This contributes to the weight-saving design of the system.
4. Improved Exhaust Support
Heavy-duty Mikalor clamps and additional rubber vibration dampeners are designed to reduce excessive stress on the pipework.
This can be particularly valuable in vehicles subjected to repeated high-load driving and vibration.
5. Improved Clearance for Lowered Vehicles
The over-axle pipe geometry is developed to provide clearance around the rear axles and anti-roll bar drop links.
This makes the system relevant to GT4 models fitted with modified or lowered suspension.
Final clearance must still be checked during installation.
6. Highly Aggressive Flat-Six Sound
The system is designed to deliver a strong, intense and unmistakably motorsport-inspired exhaust note.
It is suitable for drivers who prioritise exhaust character over quiet cruising.
7. Durable Stainless Steel Construction
The T304L stainless steel tubing offers corrosion resistance and durability under repeated thermal cycling.
The system also incorporates high-quality TIG welding and back-purged weld construction.
8. Improved Repairability
The specialised mounting components are designed to be more straightforward to repair or replace after a track incident than conventional fixed hanger arrangements.
9. Compatibility with Factory or SOUL Headers
The system is designed to connect to the factory headers or SOUL Performance headers.
Compatibility with other aftermarket header systems should not be assumed.
10. Direct Bolt-On Installation
SOUL Performance fixture-tests the exhaust assemblies for fitment and includes installation instructions.
New high-grade hardware is supplied for the header-to-exhaust flanges.
11. Manufacturer Lifetime Warranty
SOUL Performance provides a lifetime warranty for its exhaust components, subject to the applicable conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4M.RER.
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Exhaust System is a high-quality aftermarket sports exhaust upgrade designed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Developed for the naturally aspirated 3.8-litre flat-six engine, this performance exhaust system replaces the original rear exhaust assembly with a lightweight, non-valved stainless steel design incorporating performance silencers and a choice of premium exhaust tips.
The Porsche 981 GT4 and Boxster Spyder are renowned for their responsive engines, distinctive high-revving exhaust character and engaging driving experience.
SOUL Performance has engineered this exhaust system to enhance those characteristics by providing a more direct exhaust flow arrangement and a stronger, more pronounced engine sound.
Unlike a conventional valved sports exhaust, the SOUL Performance Exhaust System does not incorporate electronically operated exhaust valves.
Instead, it provides a consistent sporting exhaust note whenever the engine is running.
SOUL describes the system's sound as similar in character to its Valved Exhaust System with the valves open, but with carefully developed mufflers to minimise undesirable drone and rasp.
The exhaust is designed to produce a deeper and fuller tone than the factory Porsche Sport Exhaust (PSE), with the manufacturer describing its volume as greater than PSE in the open-valve setting.
However, the system is not intended to produce an unnecessarily harsh or excessively resonant sound during normal driving.
Its performance silencers contain high-quality sound-absorbing material designed to withstand repeated heating and cooling cycles without prematurely deteriorating.
The reinforced muffler casings are engineered for durability under demanding operating conditions.
Manufactured from mandrel-bent T304L stainless steel, the system incorporates 2.5-inch outside-diameter over-axle pipes to provide a smooth exhaust gas path.
Mandrel bending helps maintain a consistent internal pipe profile through bends, reducing unnecessary restrictions compared with poorly formed exhaust tubing.
The system is also designed to be lighter than the equivalent SOUL valved exhaust arrangement by eliminating the exhaust valve mechanisms.
A range of exhaust tip styles and finishes allows owners to personalise the rear appearance of their Porsche.
Available options include single-wall and double-wall stainless steel tips, alongside lightweight titanium single-wall exhaust tips.
SOUL states that its titanium single-wall tips can save nearly one pound compared with the corresponding stainless steel tips.
Each exhaust assembly is quality-checked and tested in a dedicated fitting fixture before dispatch.
The system is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
Backed by SOUL Performance's lifetime warranty, subject to the published conditions, this performance exhaust is suitable for owners seeking a more distinctive flat-six soundtrack, durable stainless steel construction and a simpler non-valved rear exhaust arrangement.
It is particularly attractive for Porsche enthusiasts who prefer a consistently sporting exhaust tone without relying on selectable valve operation.
What This Product Does:
The SOUL Performance Exhaust System carries exhaust gases from the engine's upstream exhaust components through the rear exhaust assembly and releases them through the exhaust outlets.
During engine operation, combustion gases leave the cylinder heads and travel through the exhaust manifolds and catalytic converter assemblies.
These gases then enter the rear exhaust system.
The SOUL exhaust uses mandrel-bent stainless steel tubing and specially developed silencers to direct the exhaust gases towards the rear outlets while controlling the resulting sound.
Its main functions include:
- Directing exhaust gases: Carries spent combustion gases through the rear exhaust and safely towards the outlets.
- Supporting efficient exhaust flow: Uses 2.5-inch over-axle tubing with smooth mandrel-formed bends.
- Enhancing exhaust sound: Produces a fuller, deeper and more aggressive naturally aspirated flat-six soundtrack.
- Reducing unwanted drone: Incorporates performance silencers designed to minimise low-frequency cabin resonance.
- Controlling exhaust rasp: Uses sound-absorbing mufflers to help maintain a refined exhaust character.
- Providing consistent sound: Delivers its sporting exhaust note without selectable exhaust valves.
- Supporting responsive engine behaviour: Provides a performance-oriented rear exhaust arrangement intended to complement the 3.8L engine.
- Maintaining upstream components: Retains compatible existing exhaust manifolds and catalytic converters.
- Improving rear appearance: Offers different exhaust tip designs and finishes.
- Providing durability: Uses corrosion-resistant stainless steel tubing and reinforced muffler casings.
- Reducing mechanical complexity: Eliminates the valve mechanisms found in a valved rear exhaust.
- Supporting performance modifications: Can complement compatible aftermarket exhaust headers and other appropriate upgrades.

Exhaust Sound Characteristics:
The SOUL Performance Exhaust System is designed to provide a stronger exhaust sound while retaining a level of refinement suitable for enthusiast use.
The manufacturer describes the system as producing a sound similar to the open-valve setting of its Valved Exhaust System.
The sound is intended to be greater in volume than the factory Porsche Sport Exhaust with its valves open.
Depending on the complete exhaust configuration, drivers may notice:
- A deeper exhaust tone at idle.
- A fuller and more robust flat-six soundtrack.
- A more pronounced exhaust note during acceleration.
- Greater sound intensity at higher engine speeds.
- Enhanced exhaust character during downshifts.
- A distinctive sporting tone during normal driving.
- Reduced unwanted drone compared with a completely unrestricted rear exhaust.
- A more refined character than a dedicated straight-through race exhaust.
Why Upgrading Matters:
The SOUL Performance Exhaust System is designed for Porsche owners who want a more pronounced engine sound and a simpler, performance-focused rear exhaust configuration.
1. Enhanced Flat-Six Exhaust Sound
The naturally aspirated 3.8L engine fitted to the Porsche 981 GT4 and Boxster Spyder produces a distinctive high-revving soundtrack.
SOUL's performance exhaust is designed to emphasise this character, creating a deeper and more aggressive exhaust tone.
2. Consistent Sporting Sound
Unlike a valved exhaust, this system does not switch between quiet and loud modes.
It provides a consistent performance exhaust character during everyday driving and more enthusiastic use.
This appeals to drivers who prefer a fixed exhaust sound.
3. Reduced Mechanical Complexity
The non-valved design eliminates moving exhaust valves and their associated mechanisms from the replacement rear exhaust.
This can simplify the exhaust arrangement compared with a system that requires valve actuation.
However, vehicle-side valve-control components may remain and should be managed according to the manufacturer's installation guidance.
4. Improved Exhaust Flow Potential
The system uses mandrel-bent 2.5-inch over-axle piping.
This design is intended to support efficient exhaust gas movement through the rear exhaust.
Specific horsepower or torque gains for this exhaust alone have not been independently confirmed.
5. Reduced Unwanted Drone
The SOUL mufflers use durable sound-absorbing materials to help control low-frequency resonance.
This makes the system an alternative to completely unrestricted rear exhaust designs.
6. Durable Stainless Steel Construction
T304L stainless steel provides corrosion resistance and suitability for repeated exposure to exhaust heat and vibration.
The reinforced muffler casings are designed for long-term durability.
7. Lighter Non-Valved Design
SOUL developed this exhaust as a lighter alternative to its valved system.
Eliminating exhaust valve hardware reduces the number of components within the rear assembly.
The exact complete-system weight saving should be verified before quoting a numerical figure.
8. Premium Exhaust Tip Options
Owners can choose from a range of single-wall and double-wall exhaust tips.
Lightweight titanium tips are available as an alternative to stainless steel.
This allows the rear appearance of the vehicle to be personalised.
9. Direct Bolt-On Installation
The exhaust is designed for direct installation on compatible vehicles.
SOUL Performance checks each system in an installation fixture and supplies fitting instructions.
10. Compatibility with Performance Headers
The manufacturer developed this exhaust to provide a sporting sound when combined with appropriate aftermarket exhaust headers.
Its mufflers help control unwanted resonance that may otherwise become more pronounced with freer-flowing upstream exhaust components.
11. Suitable for Enthusiast and Track Applications
The system provides an aggressive soundtrack while incorporating effective sound attenuation.
This may appeal to track users who require improved exhaust flow but also need to consider circuit noise limits.
Actual decibel readings must be measured for the complete vehicle configuration.
12. Manufacturer Lifetime Warranty
SOUL Performance backs its exhaust components with a lifetime warranty for street and track use, subject to the published terms and conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.ESX.
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SLTT
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SLTB
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SLTBR
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SLT
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SWTB
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SWTBR
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.SWT
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.BC
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Street Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Designed for the naturally aspirated 3.8-litre flat-six engine, this comprehensive package combines SOUL Performance Long Tube Street Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide an integrated high-performance exhaust arrangement.
Unlike the SOUL Competition Package, which removes the factory catalytic converters, the Street Package incorporates high-flow catalytic converters within its long-tube headers.
These converters are designed to provide a less restrictive exhaust path while retaining catalytic exhaust treatment.
The headers feature 2-inch primary runners, smooth-radius tubing, port-matched mounting flanges and optimised collectors to support efficient exhaust gas movement away from the engine.
Manufactured from T304L stainless steel, the headers are engineered for durability, corrosion resistance and repeated exposure to high exhaust temperatures.
The accompanying SOUL Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed rear silencers and electronically controlled exhaust valves.
With the exhaust valves closed, gases are directed through sound-absorbing mufflers that reduce unwanted exhaust resonance and help maintain a more refined driving experience.
With the valves open, exhaust gases follow a more direct path, producing a louder, more pronounced flat-six soundtrack.
This dual-character design allows the driver to enjoy a sporting exhaust note while retaining the flexibility of selectable exhaust operation.
The package is designed to integrate with the appropriate original Porsche exhaust valve controls, allowing the driver to continue using the factory exhaust button.
The Street Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance also reports measurable performance improvements from its Long Tube Street Headers when combined with suitable ECU tuning.
Backed by the manufacturer's lifetime warranty, subject to the applicable terms, this package offers a comprehensive exhaust upgrade for owners seeking enhanced engine response, a more engaging flat-six sound and an integrated stainless steel exhaust system.
What This Product Does:
The Street Package replaces the original exhaust manifolds,
catalytic converter assemblies and rear exhaust system with components designed
to improve exhaust flow and provide selectable exhaust sound characteristics.
It consists of two main systems.
1. SOUL Performance Long Tube Street Headers
The Long Tube Street Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original Porsche exhaust manifolds and catalytic converters with a stainless steel assembly incorporating long primary runners, optimised collectors and high-flow catalytic converters.
Their main functions include:
Collecting
exhaust gases: Direct combustion gases away from the cylinder heads.
Improving
exhaust flow: Use smooth-radius runners and carefully developed
collectors.
Supporting
exhaust scavenging: Encourage efficient exhaust pulse movement through
the primary pipes.
Reducing
unnecessary restriction: Use high-flow catalytic converters designed
for improved gas flow.
Supporting
engine performance: Help the naturally aspirated engine breathe more
efficiently.
Improving
throttle response: Support more responsive engine behaviour during
acceleration.
Enhancing
exhaust sound: Alter the exhaust pulse characteristics to create a
stronger flat-six tone.
Retaining
catalytic treatment: Pass exhaust gases through integrated high-flow
catalytic converters.
Supporting
high-RPM operation: Use a runner and collector design developed for
the GT4's 3.8L engine.
Providing
durability: Use stainless steel construction for demanding exhaust
operating conditions.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives gases from the headers and directs them through the rear exhaust assembly.
Its electronically controlled valves provide two different exhaust sound characteristics.
The main functions include:
Directing
exhaust gases towards the rear outlets.
Providing
selectable exhaust sound modes.
Reducing
unwanted resonance with the valves closed.
Producing
a more aggressive exhaust note with the valves open.
Supporting
efficient exhaust flow through mandrel-bent tubing.
Maintaining
compatibility with the applicable factory exhaust valve controls.
Providing
durable stainless steel rear silencers.
Enhancing
the vehicle's rear appearance through selectable exhaust tips.
Why Upgrading Matters:
The SOUL Performance Street Package provides a comprehensive
exhaust upgrade designed to improve exhaust flow, engine response and driving
enjoyment.
1. Improved Exhaust Flow
The Long Tube Street Headers incorporate smooth-radius primary runners, optimised collectors and high-flow catalytic converters.
These components are designed to reduce unnecessary restrictions and improve exhaust gas movement.
2. Increased Performance Potential
SOUL Performance reports third-party dynamometer testing of its Long Tube Street Headers on a Dyno Dynamics dynamometer.
The manufacturer's published figures include:
- Approximately
30 wheel horsepower improvement in a tested configuration with
supporting ECU tuning.
Approximately - Approximately 12 wheel horsepower incremental improvement attributed to the Street Headers after the ECU tune had been applied.
These figures relate to the Street Headers' published testing and should not be presented as independently verified gains for the complete Street Package.
Actual performance depends on the vehicle, ECU calibration, engine condition and other modifications.
3. Sharper Throttle Response
The freer-flowing headers are designed to help the engine respond more efficiently to accelerator input.
This can enhance the driving experience during acceleration, particularly at higher engine speeds.
4. Enhanced Flat-Six Sound
The combination of the long-tube headers and valved rear exhaust creates a more pronounced engine note.
The system is designed to highlight the naturally aspirated engine's characteristic sound without requiring permanently loud exhaust operation.
5. Selectable Exhaust Volume
The electronically controlled exhaust valves allow different exhaust sound modes.
This provides additional flexibility compared with a fixed, non-valved exhaust arrangement.
6. High-Flow Catalytic Converters
Unlike the catalyst-free Competition Package, the Street Package incorporates high-flow catalytic converters.
These provide catalytic exhaust treatment while being designed to reduce restriction.
However, their presence does not guarantee compliance with UK emissions, MOT or other public-road requirements.
7. Reduced Unwanted Drone
The SOUL mufflers incorporate sound-absorbing materials intended to minimise cabin resonance.
This is particularly beneficial during steady-speed driving.
8. Durable Stainless Steel Construction
The headers and rear exhaust use T304L stainless steel.
This material offers corrosion resistance and durability under repeated heating and cooling cycles.
9. Factory Exhaust Valve Control Compatibility
The Valved Exhaust System is designed to integrate with the appropriate original Porsche exhaust valve controls.
The driver can continue using the familiar factory exhaust control button.
10. Complete Integrated Upgrade
The package combines the Long Tube Street Headers and Valved Exhaust System in one manufacturer's exhaust solution.
This helps ensure the components are designed to work together.
11. Premium Exhaust Tip Options
A variety of stainless steel and titanium exhaust tips allows the owner to personalise the vehicle's rear appearance.
12. Manufacturer Warranty
SOUL Performance provides a lifetime warranty for the included exhaust components, subject to its published warranty conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.STPKG.POT
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
The SOUL Performance Competition Package is a premium aftermarket exhaust upgrade developed specifically for the Porsche 981 Cayman GT4, Boxster Spyder and GT4 Clubsport models manufactured between 2015 and 2016.
Fits:
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16
Kit Includes:
- Valved Exhaust System
- Competition Headers
Designed for the naturally aspirated 3.8L flat-six engine, this comprehensive performance package combines SOUL Performance Competition Headers with its electronically controlled Valved Exhaust System.
The package replaces the original exhaust manifold and catalytic converter assemblies, together with the factory rear exhaust system, to provide a high-flow exhaust arrangement from the cylinder heads to the exhaust outlets.
Unlike a conventional rear silencer upgrade, the Competition Package addresses both the exhaust gas collection and final exhaust delivery stages.
The Competition Headers incorporate carefully designed runners, smooth-radius tubing, port-matched flanges and optimised collectors to improve exhaust gas movement away from the engine.
These headers eliminate the original catalytic converters, reducing exhaust restriction and creating a freer-flowing exhaust path.
The accompanying Valved Exhaust System uses mandrel-bent stainless steel tubing, specially developed silencers and electronically operated exhaust valves.
With the exhaust valves closed, gases pass through the sound-absorbing silencers, producing a controlled exhaust note intended to minimise unwanted cabin drone.
With the valves open, exhaust gases follow a more direct flow path through the X-pipe and rear exhaust, creating a noticeably louder and more aggressive flat-six soundtrack.
This selectable operation makes it possible to enjoy different exhaust characteristics depending on the driving situation.
The system is manufactured using T304L stainless steel, selected for its durability, corrosion resistance and suitability for demanding exhaust conditions.
The Competition Package is designed for direct bolt-on installation on compatible vehicles, with manufacturer-supplied fitting instructions.
SOUL Performance reports third-party dynamometer testing showing significant performance gains when the package is combined with appropriate ECU tuning.
The result is a complete performance exhaust upgrade intended to enhance engine response, maximise exhaust flow potential and deliver a distinctive motorsport-inspired sound.
Ideal for Porsche enthusiasts seeking increased performance, improved exhaust character and a comprehensive exhaust upgrade for track-focused applications.
What This Product Does:
The Competition Package replaces major sections of the
original Porsche exhaust system to improve exhaust flow and provide selectable
exhaust sound characteristics.
The system consists of two main components.
1. SOUL Performance Competition Headers
The Competition Headers collect exhaust gases as they leave the engine's cylinder heads.
They replace the original manifold and catalytic converter assemblies with stainless steel headers designed to reduce exhaust restriction.
Their functions include:
- Directing exhaust gases away from the cylinder heads.
- Providing smoother exhaust runner geometry.
- Supporting improved exhaust scavenging.
- Reducing restrictions associated with the original catalyst assemblies.
- Supporting improved throttle response.
- Increasing engine performance potential.
- Enhancing the natural exhaust sound of the 3.8L flat-six engine.
- Maintaining the correct mounting arrangement for the compatible engine.
The headers use port-matched flanges, smooth-radius primary runners and optimised collectors to support efficient gas flow.
2. SOUL Performance Valved Exhaust System
The Valved Exhaust System receives exhaust gases from the headers and directs them through the rear exhaust.
It incorporates electronically operated valves that provide different sound and flow characteristics.
Its functions include:
- Directing exhaust gases towards the rear outlets.
- Providing selectable exhaust sound modes.
- Reducing unwanted drone when the valves are closed.
- Producing a more aggressive sound when the valves are open.
- Supporting efficient flow through the rear exhaust.
- Maintaining compatibility with the appropriate factory valve-control system.
- Providing a durable stainless steel silencer arrangement.
- Enhancing the vehicle's rear appearance through custom exhaust tips.

Why Upgrading Matters:
The SOUL Performance Competition Package provides a
comprehensive exhaust upgrade for drivers seeking increased performance and a
more engaging engine sound.
Improved Exhaust Flow
- The Competition Headers remove the original catalytic converters and use optimised exhaust runners and collectors.
- This reduces restrictions in the exhaust path and supports improved engine breathing.
Increased Performance Potential
SOUL Performance reports third-party testing on a Dyno Dynamics dynamometer.
The manufacturer states that testing produced:
- Approximately 40 wheel horsepower improvement in a tuned configuration.
- Approximately 20 wheel horsepower incremental improvement attributed to the Competition Headers after the ECU tune had been applied.
These gains relate to the tested vehicle and configuration.
Results will vary according to engine condition, ECU calibration and other modifications.
Improved Throttle Response
- The freer-flowing exhaust arrangement is intended to improve the engine's response to accelerator input.
- This can make the naturally aspirated flat-six feel more responsive during acceleration, particularly at higher engine speeds.
Enhanced Flat-Six Exhaust Sound
- The package is designed to reveal more of the engine's natural exhaust character.
- The Competition Headers and Valved Exhaust System work together to create a distinctive sound, particularly when the valves are open.
Selectable Exhaust Characteristics
- Unlike a permanently unrestricted rear exhaust, the valved system allows the driver to select between different sound modes.
- This offers additional flexibility for owners who use their vehicles in different driving environments.
Durable Stainless Steel Construction
- The headers and rear exhaust use T304L stainless steel.
- The construction is designed to withstand repeated heating and cooling cycles, exhaust vibration and demanding driving conditions.
Complete Exhaust Upgrade
- The package includes both Competition Headers and the Valved Exhaust System.
- This provides an integrated aftermarket solution rather than requiring separate component selection.
Motorsport-Focused Performance
- The Competition Package is intended for drivers seeking a performance-oriented exhaust setup.
- Its catalyst-free construction and high-flow design make it particularly relevant to off-road and motorsport applications.
Manufacturer Warranty
- SOUL Performance offers a lifetime warranty for its exhaust components, subject to the manufacturer's published terms and conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.GT4.COPKG.SLTT
The product you are viewing cross references to these numbers
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman GT4 3.8L 2015-16