PDK Valve Body Kit. Porsche 987.2 Boxster / 987.2 Cayman / 997.2 › 9G131701500

Wire harness for PDK valve body / hydraulic control unit. 

Fits:
Models Equipped With PDK Transmission (PR 250)
Porsche 997-2 Carrera 2009-12
Porsche 997-2 Turbo 2010-13

Diagram ref. 27.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9G131761500

The product you are viewing cross references to these numbers

PDK Distance & Speed Sensor for 7-Speed PDK

A direct replacement internal PDK distance and speed sensor assembly for Porsche models equipped with the 7DT45 or 7DT70 7-speed PDK transmission. The sensor combines the distance and speed sensing components with the wiring harness and OEM-style connector in an integrated assembly, allowing the faulty original unit to be removed and replaced without modifying or splicing the wiring..

Fits:
Porsche 987.2 Boxster  2009 - 2012
Porsche 981 Boxster 2012 - 2016
Porsche 981 Boxster Spyder 3.8L 2016
Porsche 718 (982) Boxster  2017>>

Porsche 987C.2 Cayman 2009 - 2012
Porsche 981 Cayman 2013 - 2016
Porsche 718 (982) Cayman 2017>>
Porsche 718 (982) GT4 4.0L 2019>>

Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019

Designed to address common internal PDK sensor failures that can cause transmission warning messages, fault codes, limp mode and loss of normal transmission operation.

What Does the PDK Distance & Speed Sensor Do?

The Porsche PDK transmission relies on internal sensors to monitor the position and movement of its shift mechanisms.

These signals allow the PDK control system to determine which gears are selected and accurately control gear engagement. If the sensor produces an incorrect, intermittent or implausible signal, the transmission control unit may no longer be able to reliably determine the position of the relevant shift rod.

This can trigger fault codes, dashboard warnings or transmission failsafe/limp mode.

Common Symptoms of PDK Sensor Failure

A failing distance or speed sensor may cause:

• PDK transmission warning messages
• Transmission entering limp or failsafe mode
• Loss of normal gear selection
• Difficulty selecting particular gears Loss of reverse gear
• Intermittent transmission operation
• Vehicle becoming undrivable
• “Transm. fault Poss. no R gear…” or similar dashboard warnings
• Stored PDK transmission fault codes

These symptoms can have other causes, so correct diagnostic testing should always be carried out before replacing the sensor.

Why Replace the Sensor Instead of the Complete PDK Transmission?

An internal sensor fault does not necessarily mean that the complete PDK gearbox has mechanically failed.

Where professional diagnosis confirms that the distance/speed sensor is responsible for the fault, replacing the defective internal sensor can provide a significantly more economical repair than replacing the complete transmission.

This makes the sensor particularly valuable for Porsche specialists and transmission repairers carrying out component-level PDK repairs.

New Integrated Sensor Assembly

The sensor is supplied as a brand-new component and is not used, salvaged or remanufactured.

Its integrated construction incorporates the sensor harness and OEM-style plug, eliminating the need to splice or modify the wiring during installation.

The housing is precision CNC-machined from aluminium alloy to provide excellent thermal stability and resistance to the high temperatures, vibration and demanding operating conditions found inside the PDK transmission.

Technical Design Features

The sensor incorporates several features designed to provide accurate and stable operation:

• Integrated sensor and wiring harness assembly
• No wiring modification or splicing required
• Dual-axis induction design
• Designed for strong resistance to electrical interference
• Automotive-grade integrated electronics
• Centralised chip layout for stable signal transmission
• 0.2mm ultra-thin PEEK sensing window
• Designed to minimise eddy-current effects
• CNC-machined aluminium alloy housing
• Improved resistance to heat and vibration
• Designed to address heat-related deterioration associated with original sensors

Common Porsche PDK Fault Codes

A failed distance sensor can be associated with a number of Porsche PDK diagnostic trouble codes, including:

• P1731 – Displacement Sensor Shift Rod Gears 4/6: Implausible Signal
• P1732 – Displacement Sensor Shift Rod Gears 5/7: Implausible Signal
• P1733 – Displacement Sensor Shift Rod Gears 1/3: Implausible Signal
• P1734 – Displacement Sensor Shift Rod Gears 2/R: Implausible / Incorrect Signal
• P1735 – Distance Sensor Shift Rod Gears 4/6: Short-Term Fault
• P1736 – Distance Sensor Shift Rod Gears 5/7: Short-Term Fault
• P1737 – Distance Sensor Shift Rod Gears 1/3: Short-Term Fault
• P1738 – Distance Sensor Shift Rod Gears 2/R: Short-Term Fault

The presence of one of these codes does not automatically confirm sensor failure. The transmission should be professionally diagnosed before parts are replaced.

Compatible PDK Transmissions

• 7DT45 7-speed PDK
• 7DT70 7-speed PDK

Not compatible with Porsche 911 992 models, as the 992 generation does not use the 7DT45 or 7DT70 PDK transmission.

Transmission type should always be confirmed before ordering, as model designation alone does not guarantee compatibility.

Professional Installation Required

Replacement of internal PDK sensors is a specialist procedure and should not be considered a simple DIY repair.

Installation should be carried out by an experienced Porsche or PDK transmission specialist with the appropriate diagnostic equipment.

Correct diagnosis, installation, calibration and programming are essential to ensure the transmission operates correctly after replacement.

PDK Distance & Speed Sensor Replacement

PDK transmission problems can sometimes result in owners being advised that a complete gearbox replacement is required. However, when diagnostic testing identifies an internal distance or speed sensor as the source of the problem, component-level repair may provide a considerably more cost-effective solution.

Replacing the faulty sensor allows a qualified transmission specialist to repair the affected part of the PDK system without automatically replacing an otherwise serviceable transmission.

For Porsche 997, 991, 987, 981 and 718 models equipped with compatible 7DT45 or 7DT70 transmissions, this replacement sensor provides a purpose-designed solution for repairing confirmed internal PDK sensor faults.

911 PDK Distance & Speed Sensor

The Porsche PDK Distance and Speed Sensor is a critical component in the dual-clutch transmission system of the 911. It continuously supplies the transmission control unit (TCU) with real-time position data of the gear shift rods and wheel/turbine speed. This data ensures precise gear engagement, fast shifts and smooth driving performance in everyday and high-load conditions.

Fits:
Porsche 997 MKII Carrera C2 3.6L 2009-12
Porsche 997 MKII Carrera C4 3.6L 2009-12
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
Porsche 991.1 R 4.0L (500 Bhp) 2016
Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Porsche 991.2 Speedster 4.0L (510Bhp) 2019
Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Porsche 991 GT3 Cup 2018-2019

Without accurate distance and speed sensor input, the PDK system can behave unpredictably, losing its ability to shift gears correctly. When the TCU cannot detect gear positions or speed signals, it may lock the gearbox into one gear or enter a safe “limp mode,” severely limiting vehicle performance and drivability.

Please Note
The PDKDS/1 and PDKDS/2 sensors are designed for different Porsche PDK transmission layouts. The 911 transmission is effectively a mirror image of the Boxster/Cayman gearbox, meaning the sensor is mounted in the opposite orientation.

While the Nordlicht sensor can be flipped and used in both applications, the advanced sensing technology used in the OE Match sensor requires the internal sensing elements to remain correctly positioned relative to the gearbox internals. For this reason, the PDKDS and PDKDS/1 sensors use different internal orientations and are not interchangeable.

By developing a dedicated sensor for each transmission type, the output can be calibrated far more accurately to match OEM specifications. This results in improved performance, easier calibration, and greater reliability compared to universal aftermarket sensors.

Why Distance and Speed Sensors Fail

PDK gearbox sensors are exposed to extreme heat, torque spikes and constant vibration over time. Common reasons these sensors fail include:

• Wear from prolonged exposure to high transmission temperatures
• Electrical issues like broken connections, short circuits or degraded wiring
• Normal mechanical degradation from age and mileage
• Contaminated transmission fluid affecting sensor integrity

When these sensors start to fail, the transmission control unit receives incorrect or no data, which triggers fault codes and incorrect gear shift behavior.

Common Fault Signs and Error Codes

Drivers and technicians often identify distance and speed sensor failures by diagnostic trouble codes or visible symptoms, such as:

• PDK gearbox fault warning on dashboard
• Gearbox stuck in a single gear or neutral Jerky or delayed gear changes
• Error codes like P1731 to P1734 for distance sensor issues
• Fault codes such as P0730, P1743, P1744 related to speed sensor faults

These indications show that the sensor no longer reports accurate position and speed information to the transmission control unit.

Why You May Need a Replacement Sensor

If your Porsche 911 shows gearbox faults or fails to shift smoothly, a renewed PDK distance and speed sensor can restore proper transmission operation without resorting to costly gearbox replacement. Unlike full transmission swaps, which can run into tens of thousands of pounds, replacing the internal high-quality sensor pack offers a targeted fix that restores driveability and performance.

For performance enthusiasts, frequent track use or high-mileage 911s, replacing failing sensors early can prevent further internal wear, avoid limp mode events and protect expensive transmission hardware.

Quality Replacement Parts for Porsche PDK Transmissions

At Design911, we source high-integrity PDK distance and speed sensors designed to meet or exceed OEM specifications for Porsche 911 models equipped with ZF 7DT45 or 7DT70 transmissions. These units are engineered for durability in high-heat, high-load environments and are supplied as complete assemblies with harness and connectors where applicable.

Upgrading or replacing the PDK distance and speed sensor is essential for:

• Porsche 911 owners experiencing gearbox fault codes
• Drivers who want reliable shifting and transmission response
• Vehicles with high mileage or extreme usage conditions
• Preventative maintenance before major transmission failures              

PDK Valve Body

The PDK Valve Body is a replacement hydraulic control component for selected Porsche Boxster, Cayman and 911 models fitted with the 7-speed PDK dual-clutch transmission.

Fits:

• Porsche Boxster 987 MKII 2.9L 2009-12
• Porsche Boxster S 987 MKII 3.4L 2009-12
• Porsche Cayman 2.9L 987C MKII 2009-12  
• Porsche Cayman S / R 3.4L 987C MKII 2009-12
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII Turbo 2010-13

Diagram Ref No 11

It controls the flow and pressure of transmission oil within the gearbox, helping operate the clutches and gear selection mechanisms for smooth, precise gear changes.

Not suitable for manual transmissions.

What Does It Do?

The PDK valve body directs pressurised transmission oil through internal hydraulic passages to control gear selection and clutch operation.

Working with the gearbox electronic control system, it helps deliver fast, accurate gear changes in both automatic and manual driving modes.

Why Is It Important?

A correctly functioning valve body is essential for smooth and reliable PDK operation.

A faulty valve body can contribute to:

• Harsh or delayed gear changes Jerking or hesitation when selecting gears
• Difficulty engaging Drive or Reverse
• Transmission warning messages
• Gear selection or hydraulic pressure faults

These symptoms can also have other causes, so diagnosis is essential.

Why Does It Fail?

Common causes of valve body problems include:

• Contaminated or deteriorated transmission oil
• Blocked hydraulic passages
• Internal valve wear or sticking
• Hydraulic pressure regulation faults
• Electrical or solenoid-related problems

When Should It Be Replaced?

Replacement may be required if:

• Diagnostic testing confirms an internal valve body fault
• Gear changes remain irregular despite appropriate servicing
• Hydraulic pressure faults are traced to the valve body
• Internal damage or excessive wear is identified
  
• A gearbox repair requires replacement of the hydraulic control assembly

Checks & Installation

Check diagnostic fault codes, transmission oil condition and hydraulic pressure before replacement.

Installation should be carried out by a Porsche PDK transmission specialist using the correct workshop procedures.

The gearbox may require fluid level adjustment, diagnostic checks and relevant adaptation procedures after installation.

Key Features

• Replacement PDK gearbox valve body
• Hydraulic control for gear selection and clutch operation
• Helps regulate transmission oil pressure
• Supports smooth and precise gear changes
• Suitable for selected Porsche 987.2 and 997.2 PDK gearboxes
• Replacement for a confirmed faulty valve body
• Suitable for specialist transmission repairs

Porsche 987.2 & 997.2 PDK Gearbox Valve Bodies and Transmission Parts

The Porsche PDK valve body plays an important role in controlling hydraulic pressure, clutch engagement and gear selection within the dual-clutch transmission.

The  valve body is intended for selected Porsche 987.2 Boxster, Cayman and 997.2 911 PDK gearboxes. Replacing a confirmed faulty unit can help restore correct hydraulic operation and improve gear change consistency.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9G131701500

The product you are viewing cross references to these numbers