VW

iCarsoft CR V2.0 Professional Diagnostic Tool for Multi Brand Vehicles

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.  

Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)

Contents:
CR V2.0 (1+4) Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual

Product Features

1. iCarsoft CR V2.0(1+4) can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset: Support service lamp reset.
8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
13. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
14. Injector coding, relearn the injector control parameter while the injector renewed or replaced
15. The Print Data function allows you printing out diagnostic data recorded by the scan
16. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
17. DTC Library to lookup when user is operating this tool.
18. Upgrade Via PC
19. Multi-language: English, German, Dutch, Spanish, French.

OBDII Function

• Read Codes
• Erase Codes
• I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
• Data stream.
• Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
• O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
• On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
• Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
  
• Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
• Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
• Turn off Check Engine Light (MIL), clear codes and reset monitors
• Read live PCM DataStream 
• Support CAN (Controller Area Network) and all other
• Multilingual menu and DTC definitions- English, Spanish, and German etc.
• Read pending DTCs
• Read permanent DTCs
• DTCs search
• Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
• Works on most of 2001 and later OBDII compliant PETROL European vehicles
• Works on most of 2004 and later OBDII compliant DIESEL European vehicles
• Works on most of 1996 and later OBDII compliant US and Asian vehicles
• View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
• Comprehensive Help, Including OBD Parameter, Mode Explanations & More

iCarsoft iCarsoft VAWS V2.0 for VW / Audi / Seat / Skoda

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.   

iCarsoft VAWS V2.0 is a Professional and powerful vehicle fault diagnosis tool for VW/Audi/Skoda/Seat developed by iCarsoft Technology Inc. 

With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. 

It enables technicians to accurately diagnose complex problems.  

 Product Features
1.iCarsoft VAWS V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2.Support OBDII/EOBD Ten Modes of Operation
3.Read Live Data
4.Full ECU Diagnosis
5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6.Easy To Use With Silicone Keys
7.Oil Light/Service Reset: Support service lamp reset.
8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
9.Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator
11.Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
12.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
13.Injector coding, relearn the injector control parameter while the injector renewed or replaced
14.The Print Data function allows you printing out diagnostic data recorded by the scan
15.Battery test allows you getting the voltage of battery with OBD port by the scan tool  when the engine starts.
16.DTC Library to lookup when user is operating this tool.
17.Upgrade Via PC
18.Multi-language: English, German, Dutch, Spanish, French.

Seventeen Advantages
▪Diagnose Single Brand of most Models (OBDII-16DLC)
▪Full System Diagnosis       
▪Support Oil Service Reset
▪Electronic Parking Brake (EPB) system maintenance
▪Battery Management System (BMS)
▪Diesel Particulate Filter (DPF) Regeneration Control System
▪Electronic Throttle Control System (ETC)
▪Steering Angle Sensor (SAS) Calibration
▪Injector Coding(some vehicles do not enjoy this function)
▪Read & Clear DTC                  
▪Read Live Data
▪Support Battery Test              
▪Support Data Review and Print
▪Full Speed Upgrade via PC       
▪4.0″ TFT LCD, 480*320 Pixels
▪Support Multi-Language

OBDII FUNCTION
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the
vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream 
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

Specifications
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)

Contents:
VAWS V2.0 Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual

ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data



Features & Benefits:

• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )

Twelve Super Advantages:

1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.

And for more, refer to User's Manual.

Specifications:

• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g

OBDII function:

1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.

Contents:

● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader 

iCarsoft VDSP2000 Videoscope for CR Max BT diagnostic tool

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

Only  to be used with CR MAX BT diagnostic tool

The iCarsoft USB Inspection Camera VDSP2000 Videoscope is a perfect tool for viewing and capturing video and still images of hard-to-reach areas.

It’s a perfect partner for iCarsoft tablet diagnostic tool CR MAX BT.

With its fluid resistant 5.5mm head and LED illumination, dark and fluid soaked areas are no longer a problem.

Features and Advantages

• View and record images and videos.
• Take images easily with one-click snap shot button.
• Easy to adjust the strength of light (6 levels).
• Extremely small 5.5mm camera-IP67 certified for immersion, allows for use in wet, fluid soaked spaces.
• 5.5mm camera head easily fits into most spark plug holes for inspection.

Specifications

Len O.D. (mm) : 5.5mm
Tube O.D. (mm) : 4.8mm
Tube Length: 1000mm
USB Cable Length: 1500mm
Resolution: 1280x720
Operating Temperature: 0℃~65℃
Power Supply: USB 5V
USB Port: USB2.0/Type C/Micro USB

Lower engine mount bush small. 
Sold each

Fits:
Audi A3 inc Quattro MK2 8P 2003-2012
Audi S3 MK2 8P 2006-2012 
Audi TT MK2 8J 2007-2014
Audi TTRS MK2 8J 2009-2014
Volkswagen Bora A5 1K 2005-2010
Volkswagen Caddy Mk3 Typ 2K 2004 - 06/2010 
Volkswagen Golf MK6 inc R 5K 2009-2012 
Volkswagen Golf MK5 1K
Volkswagen Golf Mk5 GTI & R32
Volkswagen Golf Plus 5M
Volkswagen Jetta Mk5 A5 1K 2005-2010 
Volkswagen Touran 2003-2015
Volkswagen Vento A5 2005 - 2010
Volkswagen CC 2012 - 2017
Volkswagen Eos 1F 2006-2016
Volkswagen Passat B6 & B7 Typ3C 2006-2013
Volkswagen Passat CC 35 2008-2012
Volkswagen Scirocco MK3 2008 - 2017 Seat Altea 5P 2004-
Seat Toledo Mk3 5P 2004-2009
Seat Leon Mk2 1P 2005-2012 
Skoda Octavia Mk2 1Z 2004-2012
Skoda Superb 2009-2010

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF85-505

The product you are viewing cross references to these numbers

Rear Indicator Units LED Fully Smoked OPTIK FIBRE LOOK VW GOLF MK6

Sold as PAIR

Fits:
Volkswagen GOLF MK6 2008-12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2215991

The product you are viewing cross references to these numbers

Rear Indicator Units LED Red & Clear R-LINE LOOK VW GOLF MK6

Sold as PAIR

Fits:
Volkswagen GOLF MK6 2008-12

Colour: Crystal clear
Colour: White / Red

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2215992

The product you are viewing cross references to these numbers

Rear wing. 



Fits:

VW Beetle Type 1 1.2ltr to 1.6lt - 08/1967 to 07/1973
VW Beetle Type 1 1302  - 08/1969 to 07/1972
08/69-07/72

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

81804002

The product you are viewing cross references to these numbers

SIMOTA HIGH PERFORMANCE CARBON FIBER AERO FORM INTAKE SYSTEM (CF）

Code: CF660-24

Fits:
VOLKSWAGEN GOLF V 2.0 GTI 04-08 2004-2008

● 100% handmade carbon kits, well performed in heat isolation.
● Customization acceptable.
● Horn shape designed at air induction path based on aerodynamic to extract maximum cold air directly.
● Washable and durable twin-inlet high flow air filter.

SmartTop Comfort roof control unit for Volkswagen Beetle



The SmartTOP roof control unit allows you to open or close the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.

Designed for:

Volkswagen Beetle Convertible 2012+

Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Individually programmable
Configure functions of the module to meet your personal preferences via our signature blinker setup menu.

Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

E13 Certification: E13 10R - 03 10070
Standby Power: < 0.1mA
Dual color LEDs: YES

SmartTop Comfort roof control unit for Volkswagen EOS



The SmartTOP roof control unit allows you to open or close the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.

Designed for:
Volkswagen EOS (all model years)

Remote control of convertible top
Open/close your convertible top using the original factory remote control key / key fob.

Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 44kmh.

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Text setup in LCD (up to MY2009)
Configure functions of the module to meet your personal preferences via our full text setup menu.

Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Separate window control
Open and close the windows and the sunroof separately by remote without activating the top.

Chirp-signal function (*)
Short audible signals when locking and/or unlocking the car.

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.

Hazard Signals (*)
Optionally the hazard blinkers are activated while top is operated from the remote.

Automatic door locks
Set power locks to automatically lock and unlock the doors when you drive.

Sunroof One-Touch
Windows and sunroof can now be closed automatically at the touch of one button.

Mirror Park Assist
This feature can automatically dip down the passenger mirror in reverse gear.

Hitch lockout bypass
Enable or disable the factory hitch lock-out to allow use of the convertible top with hitch connected.

Invert switch logic
Direction of center console top and sunroof switch can be changed to "pull to open" and "push to close".

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

(*) Important compatibility notes:
For technical reasons this feature can not be guaranteed for all models (especially 2009 and newer).

E13 Certification: E13 10R - 03 10070
Standby Power: < 0.1mA
Dual colour LEDs: YES

Universal Air induction kit with 6" Cone filter and alloy billet funnel.

Can be adapted to various vehicles.

Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm

VW ExactFit Magnetic Phone Mount - MK6 Golf / GTI / Jetta Sportwagen



Fits to the right side of console (LHD cars)

For VW - MK6 Golf / GTI / Jetta Sportwagen
**Does not fit Jetta

Detailed Description:

** Steel pad required for use on MagSafe equipped iPhones **

In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit Magnetic Phone Mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. .

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PM0110

The product you are viewing cross references to these numbers