Heat Exchangers

Package includes Headers, Mufflers, Air Intake, and Installation Kit.



This package increase power by +55HP to the crank!

All Fabspeed products included in this package are direct replacements for OEM which restrict performance and are prone to fail.

T304 stainless steel, 14-16 gauge C.N.C. mandrels bent high velocity IndyCar/Formula 1 3-into-1 pyramidal merge collectors for optimum flow to the headers for quicker turbo spool. This system will include a drip accumulator with double swivels and Aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator. 7/8" custom braided oil lines with correct 30mm radius Porsche style ball end with OEM fittings will be included to replace the stock oil lines. Dual outlet Maxflo muffler with 3.0"/76.5mm tubing for less restrictions and turbo lag. System comes with deluxe 4.5" oval tips. Stainless steel mounting brackets and new mounting straps included.
Cold air intake sold exclusively by Fabspeed Motorsports. Manufactured under the license of BMC Italy.

Fits:
Porsche 930 (911) Turbo

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR911TSPKGD

The product you are viewing cross references to these numbers

Exhaust Race Tubes. Painted steel.

Exhaust tubes to connect exhaust box (No. 91122092212) to racing heat exchangers (No. 91133091019S / 91133091020S)



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133092213

The product you are viewing cross references to these numbers

Exhaust Racing Heat Exchanger without heating function, Ø45 mm outside. Fits 91122092212 directly with use of exhaust tube 91133092213. Parts no 91122091021 needed for use with standard exhaust. Stainless steel.



Fits:
Porsche 911 T/E/S (not mech. injection) 2.0-2.4L 01/1963-07/1973
Porsche 911 S 2.4L 08/1971-07/1973
Porsche 911 S (mech. injection) 2.4L 08/1971-07/1973
Porsche 911 S (mech. injection) 2.7L 08/1973-07/1975
Porsche 911/911 S/911 Carrera 2.7L 08/1973-07/1975

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

16231019

The product you are viewing cross references to these numbers

Exhaust racing tube without heating function. Ø 38 mm outside.
Replacing heat exchangers. Painted chrome steel.



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76

Left or right side
Select below. Price is for each one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9112209101

The product you are viewing cross references to these numbers

Heat control box connecting piece for SSI heat exchangers.



Fits:
Porsche 911 2.7L-3.3 08/1973-07/1986

Click 'Zoom in' for large parts diagram.
Diagram ref 20.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91165911901

The product you are viewing cross references to these numbers

Stainless steel heat exchanger elbow connector.



Fits:
Porsche 911Carrera 3.0 1976-77
Porsche 911 SC 1978-83
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.3L 1978-89

Click 'zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121113100

The product you are viewing cross references to these numbers

Heat exchanger elbow connector



Fits:
Porsche 911/911S/Carrera 3.0 1975-77
Porsche 911 SC 1978-83
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121113100

The product you are viewing cross references to these numbers

M10 Nut for Exchanger to Muffler Bolt.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908400202

The product you are viewing cross references to these numbers

Hexagon headed heat exchanger bolt to muffler.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9000751480Y

The product you are viewing cross references to these numbers

Hexagon headed heat exchanger bolt to muffler.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9000751480Y

The product you are viewing cross references to these numbers

Heat exchanger mounting kit.



Fits:
Porsche 911 1974-86

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG91121100

The product you are viewing cross references to these numbers

Mounting kit for exhaust.



Fits:
Porsche 911 2.7L / 3.0L / 3.2L 08/73-07/85

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG91121100

The product you are viewing cross references to these numbers

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left and right.



Fits:
Porsche 911 3.2L 08/1983 - 08/1989


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623107210

The product you are viewing cross references to these numbers

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left / right.

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

IMPORTANT: Major modification needed on engine tin ware when installing on 3.2ltr engines.

Price is for a SET OF 2

Fits:
Porsche 911 (Conversion) 3.2ltr 08/1983 - 07/1989

Core Length: 470 mm
Core Width: 760 mm
Core Depth: 380 mm
Outer diameter: 41 mm

LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the by products of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623106810

The product you are viewing cross references to these numbers

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left / right.

Are you carrying out an engine swap to fit a 964 / 993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

IMPORTANT: Major modification needed on engine tin ware when installing on 3,6ltr engines.

Price is for a SET OF 2

Fits:
Porsche 911 (Conversion) 3.6ltr 01/1963 - 07/1989

Core Length: 470 mm
Core Width: 750 mm
Core Depth: 370 mm
Outer diameter: 41 mm


LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623107110

The product you are viewing cross references to these numbers

Heat exchanger sets, Stainless Steel.

Improve exhaust gas flow using these "big bore" SSi heat exchangers.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

Fits:
Porsche 911 (carb.) Europe 2.0ltr 01/63-07/73
Porsche 911 (carb.) USA 2.0ltr -2.4ltr 08/65-07/71
Porsche 911 (inj.) Europe 2.0ltr - 2.4ltr 08/68-07/71
Porsche 911 (inj.) USA 2.0ltr -2.4ltr 08/68-07/71
Porsche 911 Europe 2.7ltr 08/73-07/75
Porsche 911 Europe 3.0ltr 08/77-07/83
Porsche 911 USA Federal 2.7ltr 08/74-07/75
Porsche 911 USA Federal 3.0ltr 08/77-07/78

Price is for a SET OF 2

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091911SSI41

The product you are viewing cross references to these numbers

Heat Exchanger Sets Stainless Steel PORSCHE 911 FITTED WITH 964 or 993 3.6L ENGINE
Price is for a SET OF 2

Are you carrying out an engine swap to fit a 964/993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the side and centre silencers and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.

Fits:
Porsche 911 1964-89
Porsche 911 fitted with 964 or 993 3.6L Engine

LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091936SSI

The product you are viewing cross references to these numbers

Heat Exchanger Sets USA 1980-83 911 3.0ltr Porsche 911 K-Jet Engine Thick Flanges

Price is for a SET OF 2
Made by SSI

Fits: USA MODELS
PORSCHE 911 07/77 - 06/80 3.0L Petrol 180bhp 930.03, 930.13
PORSCHE 911 09/79 - 06/80 3.0L Petrol 188bhp 930.09, 930.19
PORSCHE 911 08/80 - 07/83 3.0L Petrol 204bhp 930.10
PORSCHE 911 03/74 - 10/83 3.0L Petrol 209bhp From 1979/08, To 1983/07

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1623105110

The product you are viewing cross references to these numbers

Heat exchanger sets, Stainless Steel for Porsche 911 1972-74 Mechanical Injection Engines SSI
Price is for a SET OF 2



Fits:
911 (inj.) Europe 2.4L 08/71-07/73
911 (inj.) USA 2.2L-2.4L 08/71-07/73
911 Carrera Europe 2.7L 08/73-07/75

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091913SSI

The product you are viewing cross references to these numbers

Heat exchanger sets, Stainless Steel. Porsche 911 3.2ltr Conversion SSI

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.

Price is for a SET OF 2

Fits:
Porsche 911 3.2L Conversion SSI
*Oil pipes 91110772910 and 91110773910 are also required also see our exhaust packages

Modification is needed on the engine tinware when installing on 3.2ltr engines.

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091917SSI

The product you are viewing cross references to these numbers

Heat Exchanger Sets Stainless Steel Porsche 911 K-Jet Engine SSI



Replace the rusty, steel heat exchangers with these high quality stainless steel SSi units.
Made using AISI 321/EN4531 titanium stabilized stainless steel, these heat exchangers offer long life, increased power output and a quality fit.  

Price is for a SET OF 2

Fits:
K-jet (none mechanical injection engines)
911 (carb.) Europe 2.0L 01/63-07/73
911 (carb.) USA 2.0L-2.4L 08/65-07/71
911 (inj.) Europe 2.0L-2.4L 08/68-07/71
911 (inj.) USA 2.0L-2.4L 08/68-07/71
911 Europe 2.7L 08/73-07/75
911 Europe 3.0L 08/77-07/83
911 USA Federal 2.7L 08/74-07/75
911 USA Federal 3.0L 08/77-07/78


LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133091911SSI

The product you are viewing cross references to these numbers

Heat Exchanger Stainless Steel Porsche 911 3.2L (for SSI "style" Conversion). Price is Each



Fits:
Porsche 911 3.2L Conversion SSI STYLE
*Oil pipes 91110772910 and 91110773910 are also required also see our exhaust packages

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9113309101

The product you are viewing cross references to these numbers

Heater flap box, long version.
Stainless steel. Left or Right - Please select below.
G50 cars only



Fits:
Porsche 911 1987-89 3.2L
Porsche 930 TURBO 1987-89 3.3L

Please note the flaps don't come with holes to acommodate caloric sensor. You may need to drill the holeas for the rivets.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121101

The product you are viewing cross references to these numbers

Heater Hose Pipe from Heat Exchanger.


Fits:
Porsche 911/911S/Carrera 3.0 1975-77
Porsche 911 SC 1978-83

Click 'zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121155300

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (non Turbo)
Porsche 993 All
Porsche 996 (non Turbo)
Porsche 997 (non Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-12

The product you are viewing cross references to these numbers

Mounting kit for heat exchanger.



Fits:
Porsche 911 Carrera 3.2L 08/1983-07/1989
Porsche 911 Turbo (930 Turbo) 3.3L 08/1983-07/1989

Kit included:
1x Large gasket for mounting heat exchanger to intermediate tube
3x Gasket for heat exchanger to cylinder head. 3 pcs. required for each heat exchanger
3x Bolt, M8x1.25x40mm
3x Nut M8x1.25, for mounting heat exchanger to cylinder head
3x Lock nut, M8x1.25, cu. Plated
3x Nut, M8x1.25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91104KIT

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-121

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 3.0L SC
Porsche 911 3.2L 1984-89
Porsche 930 turbo
Porsche 965 turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-122

The product you are viewing cross references to these numbers