Fuel Tank & Parts

This OE Match M14 to M10 90° tube banjo fitting connects a hose to a banjo-bolt connection, it is used at the fuel tank on MFI cars with an M14 banjo bolt and can also be used for suitable fuel or oil applications.

Fits

• Porsche 911 1969–75
  
  Check fitment for your specific vehicle (model, year, engine) before ordering. Match the existing tank connection, fuel-pump layout and hose arrangement.
  
  Diagram ref no 7
  
  What Is This Part?

This is an angled fluid-line connector with a ring-shaped banjo end and a hose-barb outlet. The banjo end works with the appropriate hollow bolt and sealing rings to form the connection, while the 90° tube directs the attached hose away from the joint. On the listed MFI applications, it forms part of the fuel-tank connection rather than the pump or injection equipment itself. The hose is secured using either a suitable hose clamp or a ferrule crimped in place.

What Does This Part Do?

• Connects the fluid line: Joins the banjo-bolt connection to the attached hose.
• Changes the outlet direction: The 90° tube establishes the hose's departure angle from the joint.
• Provides a hose attachment: The hose barb accepts the hose, which must be retained by the appropriate clamp or crimped ferrule.
• Forms part of the sealed joint: Works with the correct banjo bolt and sealing rings to contain fluid at the connection.
  
  Why Replace This Part?

Replacement may be appropriate if inspection finds corrosion, cracking, a distorted tube or damage to the banjo sealing faces. A damaged hose barb may also prevent the hose from seating and being retained correctly. These conditions matter because the fitting must provide both an unobstructed fluid passage and sound connection surfaces.
A leak near the fitting does not automatically mean the fitting has failed. Check the hose, clamp or ferrule, sealing rings, banjo bolt and adjoining connection before deciding which components need renewing. During tank or fuel-line work, inspect the existing fitting rather than replacing it solely because the assembly has been dismantled.

When to Replace This Part?

• Visible damage: Cracks, heavy corrosion or deformation affect the fitting or tube.
• Damaged sealing faces: Scoring or distortion prevents the banjo joint from seating correctly.
• Poor hose seating: The barb is damaged or no longer supports a secure hose connection.
• Confirmed leakage: Inspection identifies the fitting itself as the source of wetness or seepage.
• Removal and refitting: Damage found during tank or line repairs makes the existing fitting unsuitable for reuse.
  
  Where Is This Part Fitted?

Location: At the fuel-tank hose connection on the listed MFI applications, secured with an M14 banjo bolt. Its precise application depends on the tank and fuel-line arrangement fitted to the vehicle.

Technical Details

• Connection specification: M14 banjo to M10 90° hose barb.
• Tube angle: 90°.
• Hose retention: suitable hose clamp or crimped ferrule.
• Suitable uses: fuel or oil applications, subject to matching connections and system requirements.
  
  Product Summary

• Product: M14 to M10 90° tube banjo fitting / fuel pick-up banjo elbow.
• Brand: OE Match.
• Purpose: Connects a hose to a banjo-bolt joint with an angled outlet.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135604900

The product you are viewing cross references to these numbers

Braided Fuel Hose (Sold by the Metre) - 7.3mm Internal Diameter / 13.5mm Outer Diameter. 

This high-quality braided fuel hose is designed for multiple uses within the fuel system of various vehicles. It offers extremely low fuel permeability, excellent heat resistance, and high flexibility, making it a reliable choice for demanding applications.

Fits:
Porsche 356 1950-65
Porsche 911 Carrera 1965-1977 
Porsche 912 1967-69
Porsche 914 1970-76 

Comparable to Porsche part number(s): 99918003050 & 9991800305A

Specifications:
Inner Diameter (ID): 7.3mm
Outer Diameter (OD): 13.5mm 
Material: FPM/ECO/AR/ECO (Type 3E) – Compliant with DIN 73379-1
Complies With: EU End-of-Life Vehicles Directive

NOTE: This product is not suitable for use in fuel tanks, or for gear and/or engine oils. Always follow the manufacturer's specifications regarding operating temperatures, especially for high-performance engines exposed to extreme heat.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9991800305A

The product you are viewing cross references to these numbers

Braided Fuel Hose (Sold by the Metre) - 9.3mm Internal Diameter / 15.3mm Outer Diameter. 

This high-quality braided fuel hose is designed for multiple uses within the fuel system of various vehicles. It offers extremely low fuel permeability, excellent heat resistance, and high flexibility, making it a reliable choice for demanding applications.

Fits:
Porsche 911 Carrera 1965-89
Porsche 911 Turbo (930) 1975-89 
Porsche 914 1970-76
Porsche 924 1976-85
Porsche 928 1978-91

Comparable to Porsche part number(s): N0203591 & PCG020359A

Specifications:

Inner Diameter (ID): 9.3mm
Outer Diameter (OD): 15.3mm 
Material: FPM/ECO/AR/ECO (Type 3E) – Compliant with DIN 73379-1
Complies With: EU End-of-Life Vehicles Directive

NOTE: This product is not suitable for use in fuel tanks, or for gear and/or engine oils. Always follow the manufacturer's specifications regarding operating temperatures, especially for high-performance engines exposed to extreme heat.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG020359A

The product you are viewing cross references to these numbers

Clear breather hose for fuel tank - 1m length.

Fits:
Porsche 911 - 1965 to 1973
Porsche 911 2.7ltr MFI Carrera - 1974 to 1976
Porsche 912 - 1965 to 1970

Breather hose for fuel tank ventilation. Clear hose in a length of 1 meter

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004320520

The product you are viewing cross references to these numbers

Porsche connecting hose for selected classic 911 fuel systems equipped with a rear-mounted fuel pump. The specific diagram entry identifies 911 E/S CARRERA 2.7, with the application remark 73-.

Fits

• 911 & 912 (1965-1989)=>911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Specific diagram application: 911 E/S CARRERA 2.7; remark: 73-.

The broader assembly coverage below is diagram context, not confirmation that this hose suits every model shown. Use the specific hose entry when checking compatibility.

Diagram: Fuel system lines with fuel pump rear for 911 T/E/S 1971 ONWARDS and 911 T-V / CARRERA 2.7 / 911 T-K 1972 ONAWRDS.

Check fitment for your specific vehicle (model, year, engine) before ordering.

What This Product Does

This hose provides a connection within the fuel-system pipework shown in the exploded assembly. It is a connecting component, rather than the fuel pump, tank or threaded fittings illustrated alongside it.

Functions

• Connects the relevant sections of fuel-system pipework.
• Forms part of the fuel-line assembly on the specified applications.

Technical Details

• Manufacturer: Porsche.
• Part number: 90120110800.
• Diagram component description: connecting hose.
• Specific model entry: 911 E/S CARRERA 2.7.
• Application remark: 73-.
• Quantity recorded in the assembly: 1.

Symptoms of Fault

• Visible cracks or deterioration in the existing hose.
• Petrol odour close to the hose or its connections.
• Dampness or fuel staining around the connection.

Why Replacement Matters

Renewing a deteriorated connecting hose addresses a potential leak point in ageing fuel-system pipework. Inspect adjoining connections during diagnosis, since nearby hoses and fittings can produce similar signs; a fuel smell alone does not identify this particular component as faulty.

FAQs

Does the assembly title establish fitment for every listed 911?
No. The assembly covers several variants, while this hose has its own model entry and application remark. Confirm both against the vehicle before selecting the part.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90120110800

The product you are viewing cross references to these numbers

Drain Plug.
requires seal ring part no. 90012311830 also

Fits:
Porsche 911 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90021900132

The product you are viewing cross references to these numbers

Fuel filter for fuel tank, 6 mm.

Fits:
Porsche 911 Carrera RS 2.7 with carb. 08/72-07/73
Porsche 911 T/E/S 2.0-2.4 with carb. 07/66-07/73
Porsche 912 1.6 with carb. 01/65-02/70

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90120102306

The product you are viewing cross references to these numbers

Fuel filter for fuel tank, 8 mm.

Fits:
Porsche 911 E/S 1969-71

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90120102307

The product you are viewing cross references to these numbers

Fuel level sender gasket
OE Match fuel level sender gasket for Porsche 911 models from 1971–89, including the 930 Turbo from 1975–89. A replacement seal for the fuel sender mounting joint.

Fits

• Porsche 911 1971 - 1989
• Porsche 911 (930) Turbo 1975 - 1989

Diagram ref no 60

What This Product Does

This gasket seals the connection between the fuel tank and its level sender. It is a sealing component, rather than the electrical sender that supplies the dashboard fuel reading.

Functions

• Seals the sender mounting joint.
• Helps contain fuel and vapour at the sender opening.

Technical Details

• Brand: OE Match.
• Component: fuel level sender gasket.
• Supplied references: 477919133 and 113919133.
• Diagram Ref No 60.

Symptoms of Fault

• Petrol odour near the sender mounting area.
• Dampness or staining around the sender joint.
• Persistent fuel smells following tank or sender work.

Why Replacement Matters

A deteriorated sender seal can allow fuel or vapour to escape at the mounting joint. Renewing a damaged gasket addresses this sealing point during sender repairs or tank refurbishment. Check adjoining fittings and sealing surfaces rather than assuming every fuel smell originates from this gasket.

FAQs

Will this gasket correct an inaccurate fuel gauge?
It replaces the sender seal, not the sensing mechanism. Erratic readings require checks of the sender, wiring, earth connections and gauge.

Should the gasket be checked during sender removal?
Yes. Inspect the seal and mounting surfaces during the work, and replace a deteriorated gasket before reassembly.

Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG919133A

The product you are viewing cross references to these numbers

Fuel level sender gasket
This replacement rubber sealing gasket fits between the fuel level sender unit and fuel tank, providing a secure, fuel-resistant seal to help prevent petrol leaks and fuel vapour escaping from the sender mounting area. An essential component when removing or replacing the fuel level sender, particularly during fuel tank restoration or maintenance.

Fits

• Porsche 911 1971-89
• Porsche 911 (930) Turbo 1975-89

Diagram Ref No 60

What This Product Does

This gasket is fitted beneath the fuel level sender where it mounts to the fuel tank. It provides the sealing surface required between the sender unit and tank and is recommended whenever the sender is removed for servicing or replacement.

Functions

• Seals the sender mounting interface.
• Helps prevent petrol seepage and vapour escape at the joint.

Technical Details

• Brand: Porsche.
• Supplied reference: 477919133 / 113919133 / PCG919133A
• Component: fuel level sender gasket.

Symptoms of Fault

• Petrol odour near the sender mounting area.
• Dampness or staining around the sender joint.
• Visible deterioration or damage to the existing gasket.

Why Replacement Matters

Fuel level sender gaskets can deteriorate over time due to age, exposure to petrol and repeated temperature changes.

An old gasket may become hard, flattened, brittle or cracked, reducing its ability to seal effectively.

A damaged fuel sender gasket can allow petrol or fuel vapours to escape from the top of the fuel tank, potentially causing a noticeable petrol smell in the front luggage compartment. Replacing the gasket helps restore a secure seal and reduces the risk of fuel leakage.

FAQs

Will this correct an erratic fuel gauge?
The gasket provides sealing only. Inaccurate readings require checks of the sender, wiring, earth connections and gauge.

Should the seal be checked during sender work?
Yes. Inspect the gasket whenever the sender is disturbed, as an aged or damaged seal can allow fumes or fuel to escape.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG919133A

The product you are viewing cross references to these numbers

Fuel Pick-Up Banjo Elbow for Early Carbureted 911.
For Lines with Banjo Connections
with bolts

Fits:
Porsche 911 E/S 2.2-2.4 08/68-07/73
Porsche 911 Carrera 2.7 08/73-07/74

Bolt - 18.7mm
Pipe - ID (Inside Diameter) 9.1mm
Pipe - OD (Outside Diameter) 11.9mm

Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135604900

The product you are viewing cross references to these numbers

Fuel Pick-Up Banjo Elbow for Early Carbureted 911.

8mm pipe / 12mm banjo

Fits:
Porsche 911 1969-75

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135604900

The product you are viewing cross references to these numbers

Restore your Porsche 911’s fuel system with this 100-litre replacement fuel tank from OE Match. Offering increased fuel capacity, it is an ideal choice for touring, competition-inspired builds, restorations and vehicles requiring a long-range fuel solution.

Manufactured to provide an accurate fit and dependable performance, the tank is designed to install in the original front luggage-compartment position while maintaining a factory-style appearance. Its OE-style construction makes it a practical alternative to a worn, corroded or damaged original tank.

Fits:
Porsche 911 2.0L-3.3L 01/1963-07/1989 (74-89 may require modifications to bottom pipe connections)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90120101030

The product you are viewing cross references to these numbers

Replace your worn or corroded fuel tank with this high-quality Dansk Fuel Tank, manufactured to provide an excellent fit and reliable performance for classic Porsche 911 models. 

Fits:
Porsche 911 2.0L-2.7L 08/1971-07/1973

Diagram ref no: 1.

Dansk is renowned for producing premium restoration and replacement parts for air-cooled Porsches, making this fuel tank an ideal choice for both maintenance and concours-level restoration projects. Manufactured to closely replicate the original factory design, this fuel tank features the correct capacity, mounting locations, and fuel line connections for straightforward installation. Built from durable materials and finished to a high standard, it helps ensure a clean and consistent fuel supply while maintaining the originality and value of your Porsche. Whether you're restoring a classic 911 or replacing a damaged fuel tank, this Dansk unit offers the quality, fitment, and reliability expected by Porsche enthusiasts worldwide.

Features:

• Dansk replacement fuel tank for Porsche part number 91120190402 
• Manufactured to original factory specifications 
• Correct capacity and OE-style construction
• Durable, corrosion-resistant design
• Accurate mounting points and fuel connections
• Direct-fit replacement for compatible Porsche 911 models Ideal for restoration, repair, and maintenance applications

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120190402

The product you are viewing cross references to these numbers

Replace your rusty or leaking gas tank with our new galvanized steel replacement.

Fits:
Porsche 911 2.0L-2.7L 10/1963 - 07/1973
Porsche 912 1.6L 08/1964-07/1968

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120190402

The product you are viewing cross references to these numbers