Steering, Hub & Suspension

Sealey Reverse Action Wheel Stud Thread Restorer KitUnique design allows for the two halves of the thread restorer to be fitted on the good thread and wound back over the damaged thread, normally at the end of the stud. Traditional thread restorers rely on luck for the restored and undamaged threads to align. Kit contains the three most common wheel stud thread sizes. Supplied in storage case.• Unique design allows for the two halves of the thread restorer to be fitted on the good thread and wound back over the damaged thread, normally at the end of the stud.
• Traditional thread restorers rely on luck for the restored and undamaged threads to align.
• Kit contains the three most common wheel stud thread sizes.
• Supplied in storage case.
• Model No. SX203• Unique design allows for the two halves of the thread restorer to be fitted on the good thread and wound back over the damaged thread, normally at the end of the stud.
• Traditional thread restorers rely on luck for the restored and undamaged threads to align.
• Kit contains the three most common wheel stud thread sizes.
• Thread Sizes: 12x1.25, 12x1.5, 14x1.5mm.
• Supplied in storage case.Reverse Action Wheel Stud Thread Restorer Kit

Sealey Ribe Bit Set 22pc 3/8" & 1/2"Sq DriveChrome Vanadium steel sockets with high strength S2 steel bits. Ribe profile suitable for work on Italian vehicles including Alfa Romeo, Fiat and Lancia. Supplied in storage case.• Chrome Vanadium steel sockets with high strength S2 steel bits.
• Ribe profile suitable for work on Italian vehicles including Alfa Romeo, Fiat and Lancia.
• 30mm & 75mm Bits; M4-M14.
• Supplied in storage case.
• Model No. SX105• Chrome Vanadium steel sockets with high strength S2 steel bits.
• Ribe profile suitable for work on Italian vehicles including Alfa Romeo, Fiat and Lancia.
• Supplied in storage case.22pc Ribe Bit Set 3/8" & 1/2"Sq Drive

Sealey Seal Driver Set 18pc CompositeSet of assorted seal drivers suitable for installation of seals without damage. Includes three hooded drivers for seals with dust shields• Drive seals quickly, accurately and without damage.
• Set of assorted seal drivers up to Ø88.5mm.
• Includes three hooded drivers for seals with dust shield.
• Model No. VS704.• Set of assorted seal drivers suitable for installation of seals without damage.
• Includes three hooded drivers for seals with dust shields18pc Seal Driver Set - Composite

Sealey Seal PullerChrome shaft with chemically blackened tip insert. Suitable for safe removal of oil and grease seals found in automotive drives and transmissions, without damage to seal or surrounding casting. The two tips fit most popular seal sizes.• Chrome shaft with chemically blackened tip insert.
• Suitable for safe removal of oil and grease seals found in automotive drives and transmissions without damage to seal or surrounding casting.
• The two tips fit most popular seal sizes.
• Model No. AK7000• Chrome shaft with chemically blackened tip insert.
• Suitable for safe removal of oil and grease seals found in automotive drives and transmissions, without damage to seal or surrounding casting.
• The two tips fit most popular seal sizes.Seal Puller

Sealey Small Jaw 80-145mm Black Coated (formerly 87-1200)• Yoke for RE224 & RE225 Ø80-145mm.
• Model No. 90.0010• Yoke for RE224 & RE225 Ø80-145mmSmall Jaw 80-145mm Black Coated

Sealey Special Jaw Conical Spring 80-145mm Black Coated (formerly 98-1208)• Yoke for RE224 & RE225 Ø80-145mm for Conical Springs.
• Model No. 90.0060• Yoke for RE224 & RE225 Ø80-145mm for Conical SpringsSpecial Jaw Conical Spring 80-145mm Black Coated

Sealey Special Jaw Mercedes C-Series, Type 203 Black Coated• Yoke for RE224 & RE225 Mercedes C-Series, Type 203.
• Model No. 90.0080• Yoke for RE224 & RE225 Mercedes C-Series, Type 203.Special Jaw Mercedes C-Series, Type 203 Black Coated

Sealey Special Jaw Mercedes E-Series, Type 211 Black Coated• Yoke for RE224 & RE225 Mercedes E-Series, Type 211.
• Model No. 90.0090• Yoke for RE224 & RE225 Mercedes E-Series, Type 211.Special Jaw Mercedes E-Series, Type 211 Black Coated

Sealey Spline Socket Bit Extra-Long M10 x 800mm 1/2"Sq DriveSave valuable minutes and loosen drive shaft screws from the outside. Suitable for VAG vehicles. Hardened and tempered Chrome Vanadium steel socket. Chrome plated with satin finish. Knurled ring on socket to assist gripping with oily fingers. S2 Steel spline bit extension with phosphate coating.• Save valuable minutes and loosen drive shaft screws from the outside. Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel socket.
• Chrome plated with satin finish.
• Knurled ring on socket to assist gripping with oily fingers.
• S2 Steel spline bit extension with phosphate coating.
• Model No. AK5536• Save valuable minutes and loosen drive shaft screws from the outside.
• Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel socket.
• Chrome plated with satin finish.
• Knurled ring on socket to assist gripping with oily fingers.
• S2 Steel spline bit extension with phosphate coating.M10 x 800mm 1/2"Sq Drive Extra-Long Spline Socket Bit

Sealey Spline Socket Bit Extra-Long M12 x 800mm 1/2"Sq DriveSave valuable minutes and loosen drive shaft screws from the outside. Suitable for VAG vehicles. Hardened and tempered Chrome Vanadium steel socket. Chrome plated with satin finish. Knurled ring on socket to assist gripping with oily fingers. S2 Steel spline bit extension with phosphate coating.• Save valuable minutes and loosen drive shaft screws from the outside. Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel socket.
• Chrome plated with satin finish.
• Knurled ring on socket to assist gripping with oily fingers.
• S2 Steel spline bit extension with phosphate coating.
• Model No. AK5540• Save valuable minutes and loosen drive shaft screws from the outside.
• Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel socket.
• Chrome plated with satin finish. Knurled ring on socket to assist gripping with oily fingers.
• S2 Steel spline bit extension with phosphate coating.M12 x 800mm 1/2"Sq Drive Extra-Long Spline Socket Bit

Sealey Spline Socket Bit Extra-Long M8 x 800mm 1/2"Sq DriveSave valuable minutes and loosen drive shaft screws from the outside. Suitable for VAG vehicles. Hardened and tempered Chrome Vanadium steel socket. Chrome plated with satin finish. Knurled ring on socket to assist gripping with oily fingers. S2 Steel spline bit extension with phosphate coating.• Save valuable minutes and loosen drive shaft screws from the outside. Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel socket.
• Chrome plated with satin finish.
• Knurled ring on socket to assist gripping with oily fingers.
• S2 Steel spline bit extension with phosphate coating.
• Model No. AK5535• Save valuable minutes and loosen drive shaft screws from the outside.
• Suitable for VAG vehicles.
• Hardened and tempered Chrome Vanadium steel socket.
• Chrome plated with satin finish.
• Knurled ring on socket to assist gripping with oily fingers. S2 Steel spline bit extension with phosphate coating.1/2"Sq Drive Extra-Long Spline Socket Bit M8 x 800mm

Sealey Steering Rack Knuckle ToolSuitable for the fast and easy removal of the steering knuckle. Fits racks with hex drive, two flats and round ends. Ideal for vehicles with limited access and avoids the need to remove the rack assembly. Suitable for steering rack knuckles with a diameter of 33 to 41mm.• Suitable for the fast and easy removal of the steering knuckle.
• Fits racks with hex drive, two flats and round ends.
• Ideal for vehicles with limited access and avoids the need to remove the rack assembly.
• Suitable for steering rack knuckles with a diameter of 33 to 41mm.
• Model No. VS4000• Suitable for the fast and easy removal of the steering knuckle.
• Fits racks with hex drive, two flats and round ends.
• Ideal for vehicles with limited access and avoids the need to remove the rack assembly.
• Suitable for steering rack knuckles with a diameter of 33 to 41mm.Steering Rack Knuckle Tool

Sealey Steering Rack Knuckle Tool 400mmSuitable for the fast and easy removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Fits racks with hex drive, two flats and round ends with a diameter of 29 to 34mm.• Suitable for the fast and easy removal/installation of the steering knuckle.
• Designed to fit over the steering shaft onto the steering rack.
• Fits racks with hex drive, two flats and round ends with a diameter of 29 to 34mm.
• Model No. VS4002• Suitable for the fast and easy removal/installation of the steering knuckle.
• Designed to fit over the steering shaft onto the steering rack.
• Fits racks with hex drive, two flats and round ends with a diameter of 29 to 34mm.400mm Steering Rack Knuckle Tool

Sealey Steering Rack Knuckle Tool 470mmSuitable for the fast and easy removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Fits racks with hex drive, two flats and round ends with a diameter of 35.5 to 41mm.• Suitable for the fast and easy removal/installation of the steering knuckle.
• Designed to fit over the steering shaft onto the steering rack.
• Fits racks with hex drive, two flats and round ends with a diameter of 35.5 to 41mm.
• Model No. VS4001• Suitable for the fast and easy removal/installation of the steering knuckle.
• Designed to fit over the steering shaft onto the steering rack.
• Fits racks with hex drive, two flats and round ends with a diameter of 35.5 to 41mm.
• Model No. VS4001Steering Rack Knuckle Tool 470mm

Sealey Steering Turntables PairUse in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment. Also measures toe-in/out and full lock angles. Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements. Measures up to 45º rotation in either direction. Maximum loading 1360kg per pair.• Use in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment.
• Also measures toe-in/out and full lock angles.
• Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements.
• Measures up to 45º rotation in either direction.
• Maximum loading 1360kg per pair.
• Model No. GA44• Use in conjunction with Model No. GA42 Gauge Set for accurate castor and kingpin alignment.
• Also measures toe-in/out and full lock angles.
• Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements.
• Measures up to 45º rotation in either direction.
• Maximum loading 1360kg per pair.Steering Turntables Pair

Sealey Strut Leg Pry Socket Set 2pc 1/2"Sq DriveReduces risk of damage to hub casting associated with using hammers and chisels to free the strut leg. Suitable for removal and installation of legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.• Reduces risk of damage to hub casting.
• Includes two sizes of pry socket: 7 x 5mm and 8.2 x 5.5mm.
• Suitable for removal and installation of strut legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.
• Model No. SX034• Reduces risk of damage to hub casting associated with using hammers and chisels to free the strut leg.
• Suitable for removal and installation of legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW.2pc 1/2"Sq Drive Strut Leg Pry Socket Set

Sealey Strut Nut Socket Audi, VWSuitable for the removal and installation of top shock retaining nut. Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock. Use with 22mm spanner.• Suitable for the removal and installation of top shock retaining nut.
• Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock.
• Use with 22mm spanner.
• Model No. SX028• Suitable for the removal and installation of top shock retaining nut.
• Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock.
• Use with 22mm spanner.Strut Nut Socket - Audi, VW

Sealey Strut Nut Tool 3pc Audi, VWSuitable for the removal and installation of strut nuts on McPherson struts fitted to Audi and VW vehicles.• Suitable for the removal and installation of strut nuts on McPherson struts fitted to Audi and VW vehicles.
• Model No. SX033• Suitable for the removal and installation of strut nuts on McPherson struts fitted to Audi and VW vehicles.Strut Nut Tool 3pc Audi, VW

Sealey Subframe Locating Pin Set 4pc VAGSet of four subframe locating pins allows precise alignment of the subframe to the vehicle's chassis. Compatible with a wide variety of Audi and VW vehicles.• Set of four subframe locating pins allows precise alignment of the subframe to the vehicle's chassis.
• Compatible with a wide variety of Audi and VW vehicles.
• Model No. VS3900• Set of four subframe locating pins allows precise alignment of the subframe to the vehicle's chassis.
• Compatible with a wide variety Audi and VW vehicles.4pc Subframe Locating Pin Set - VAG

Sealey Suspension Arm LeverSuitable for the in situ separation of suspension components with minimum manual effort and maximum efficiency. Fully adjustable fulcrum position allows for use in a variety of positions and caters for left or right handed use.• Suitable for the in situ separation of suspension components with minimum manual effort and maximum efficiency.
• Fully adjustable fulcrum position allows for use in a variety of positions and caters for left or right handed use.
• Model No. VS3815• Suitable for the in situ separation of suspension components with minimum manual effort and maximum efficiency.
• Fully adjustable fulcrum position allows for use in a variety of positions and caters for left or right handed use.Suspension Arm Lever

Sealey Telescopic Spring Compressor - Wishbone Suspension 1250kgDesigned for use on wishbone suspension using access points in the rear suspension arm. Features two pairs of carefully shaped yokes that prevent the coil spring from bowing. Saves time over traditional methods of demounting springs. Supplied in carry-case.• Designed for use on wishbone suspension using access points in the rear suspension arm.
• Features two pairs of carefully shaped yokes that prevent the coil spring from bowing.
• Saves time over traditional methods of demounting springs.
• Applications: Fiat, Hyundai, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Rover, Saab, Toyota, Volvo, VW.
• Supplied in carry-case.
• Model No. RE2280• Designed for use on wishbone suspension using access points in the rear suspension arm.
• Features two pairs of carefully shaped yokes that prevent the coil spring from bowing.
• Saves time over traditional methods of demounting springs.
• Supplied in carry-case.Telescopic Spring Compressor - Wishbone Suspension 1250kg

Sealey Thread Restoring File Set 3pcSuitable for the restoration of external threads. 220mm Double end files each supplied with reversible vinyl grip. Packed in storage pouch.• Suitable for the restoration of external threads.
• 220mm Double end files each supplied with reversible vinyl grip.
• Packed in storage pouch.
• Model No. AK313• Suitable for the restoration of external threads.
• 220mm Double end files each supplied with reversible vinyl grip.
• Packed in storage pouch.3pc Thread Restoring File Set

Sealey Torque Limited Tyre Valve Tool - 4lb.in/0.45NmSpecialist tool specifically designed to prevent over tightening of valves cores fitted to wheels/tyres with TPMS. Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs. Preset torque value.• Specialist tool specifically designed to prevent over tightening of valve cores fitted to wheels/tyres with TPMS.
• Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs.
• Preset torque value.
• Model No. TSTVTX• Specialist tool specifically designed to prevent over tightening of valves cores fitted to wheels/tyres with TPMS.
• Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs.
• Preset torque value.4lb.in/0.45Nm Torque Limited Tyre Valve Tool

Sealey Torque Multiplier Wheel Nut Wrench 65:1Ideal for removing/installing wheel nuts on commercial and light commercial vehicles when air impact wrench is not easily accessible. Supplied in carry-case with 210mm extension for spinning of loosened nut and 32mm impact socket.• Ideal for removing/installing wheel nuts on commercial and light commercial vehicles when air impact wrench is not easily accessible.
• Supplied in carry-case with 210mm extension for spinning of loosened nut and 32mm impact socket.
• Model No. SX500• Ideal for removing/installing wheel nuts on commercial and light commercial vehicles when air impact wrench is not easily accessible.
• Supplied in carry-case with 210mm extension for spinning of loosened nut and 32mm impact socket.Torque Multiplier Wheel Nut Wrench 65:1

Sealey Torque Stick 1/2"Sq Drive 100NmChrome Molybdenum steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour coding for easy selection. Features a twist distortion marking for checking serviceability of tool.• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.
• Model No. VS2244• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.Torque Stick 1/2"Sq Drive 100Nm

Sealey Torque Stick 1/2"Sq Drive 110NmChrome Molybdenum steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour coding for easy selection. Features a twist distortion marking for checking serviceability of tool.• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.
• Model No. VS2245• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.Torque Stick 1/2"Sq Drive 110Nm

Sealey Torque Stick 1/2"Sq Drive 120NmChrome Molybdenum steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour coding for easy selection. Features a twist distortion marking for checking serviceability of tool.• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.
• Model No. VS2246• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.Torque Stick 1/2"Sq Drive 120Nm

Sealey Torque Stick 1/2"Sq Drive 135NmChrome Molybdenum steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour coding for easy selection. Features a twist distortion marking for checking serviceability of tool.• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.
• Model No. VS2247• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.Torque Stick 1/2"Sq Drive 135Nm

Sealey Torque Stick 1/2"Sq Drive 90NmChrome Molybdenum steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour coding for easy selection. Features a twist distortion marking for checking serviceability of tool.• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.
• Model No. VS2243• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.
• Prevents over-torque of wheel nuts.
• Anodised aluminium colour coding for easy selection.
• Features a twist distortion marking for checking serviceability of tool.Torque Stick 1/2"Sq Drive 90Nm

Sealey Torque Stick & Aluminium Wheel Impact Socket Set 8pc 1/2"Sq DriveSet includes alloy steel torque sticks and Chrome Molybdenum impact sockets, which are hardened, tempered and anodised for corrosion resistance. Both are designed for use with air and electric impact wrenches and are colour coded for easy selection. The torque sticks prevent over-torquing of wheel nuts which causes distortion of wheels, drums and discs which can produce brake pulsation. Torque sticks can be used with any impact grade sockets and are especially suitable for thin-walled sockets. Popular torque rates for most cars and light commercial vehicles. The impact sockets are sleeved to prevent damage to alloy wheels. Supplied in carry-case.• Alloy steel torque sticks and Chrome Molybdenum impact sockets designed for use with air and electric impact wrenches.
• Colour coded for easy selection.
• Socket Sizes: 17-22mm.
• Impact sockets are sleeved to prevent damage to alloy wheels and nuts.
• Stick ratings 80-110lb.ft.
• Ideal for fast fit operations.
• Model No. AK2243• Set includes alloy steel torque sticks and Chrome Molybdenum impact sockets, which are hardened, tempered and anodised for corrosion resistance.
• Both are designed for use with air and electric impact wrenches and are colour coded for easy selection.
• The torque sticks prevent over-torquing of wheel nuts which causes distortion of wheels, drums and discs which can produce brake pulsation.
• Torque sticks can be used with any impact grade sockets and are especially suitable for thin-walled sockets.
• Popular torque rates for most cars and light commercial vehicles.
• The impact sockets are sleeved to prevent damage to alloy wheels.
• Supplied in carry-case.8pc 1/2"Sq Drive Torque Stick & Alloy Wheel Impact Socket Set

Sealey Torque Stick Set 5pc 1/2"Sq DriveAlloy steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torquing of wheel nuts which causes distortion of wheels, drums and discs. Helps prevent brake pulsation. Can be used with any impact grade sockets and especially suitable for thin-walled sockets. Fast, easy-to-use and cost efficient. Ideal for fast-fit operations. Popular torque rates for most cars and light commercial vehicles. Supplied in storage case.• Alloy steel torque sticks designed for use with air and electric impact wrenches.
• Fast, easy-to-use and cost efficient.
• Ideal for fast-fit operations.
• Ratings 70-110lb.ft.
• Supplied in storage case.
• Model No. AK2242• Alloy steel torque sticks designed for use with air and electric impact wrenches.
• Prevents over-torquing of wheel nuts which causes distortion of wheels, drums and discs.
• Helps prevent brake pulsation.
• Can be used with any impact grade sockets and especially suitable for thin-walled sockets.
• Fast, easy-to-use and cost efficient.
• Ideal for fast-fit operations.
• Popular torque rates for most cars and light commercial vehicles.
• Supplied in storage case.5pc 1/2"Sq Drive Torque Stick Set

Sealey TPMS Valve ToolSpecialist tool designed to remove 11mm and 12mm TPMS sensor nuts and reseating the bevelled and non-bevelled sealing grommets.• Specialist tool designed to remove 11mm and 12mm TPMS sensor nuts and reseating the bevelled and non-bevelled sealing grommets.
• Model No. TSTPMS• Specialist tool designed to remove 11mm and 12mm TPMS sensor nuts and reseating the bevelled and non-bevelled sealing grommets.TPMS Valve Tool

Sealey Trailing Arm Bush Removal/Installation Tool - Vauxhall/Opel VectraAllows the upper and lower damping bushes in the trailing arm to be removed, and new bushes installed, in situ, without removing the trailing arm from the car.• Trailing arm upper and lower damping bushes can be removed, and new bushes installed, without removing the trailing arm from the car.
• Application: Vauxhall/Opel Vectra-B (pre 02).
• Model No. VS4460• Allows the upper and lower damping bushes in the trailing arm to be removed, and new bushes installed, in situ, without removing the trailing arm from the car.Trailing Arm Bush Removal/Installation Tool - Vauxhall/Opel Vectra

Sealey Twin Connector Tyre Pressure Gauge 0-220psiDial type pressure gauge with twin connector, Ø58mm reading to 16bar (220psi). Metal body, long reach connector and high range scale. Compatible with both cars and commercial vehicles.• Dial type pressure gauge with twin connector, Ø58mm reading to 16bar (220psi).
• Metal body, long reach connector and high range scale.
• Compatible with both cars and commercial vehicles.
• Model No. TSTPG34• Dial type pressure gauge with twin connector, Ø58mm reading to 16bar (220psi).
• Metal body, long reach connector and high range scale.
• Compatible with both cars and commercial vehicles.0-220psi Twin Connector Tyre Pressure Gauge

Sealey Tyre & Wheel Handling Dolly 127kg CapacityEnables commercial sized wheels and tyres to be removed from/installed on hub studs.• For commercial sized wheel and tyre removal/installation.
• Fork Centres: 535mm.
• Model No. TH002• Enables commercial sized wheels and tyres to be removed from/installed on hub studs.Wheel & Tyre Handling Dolly 127kg Capacity

Sealey Tyre Bar for Aluminium WheelsTyre bar fitted with nylon ferrules to prevent damage to aluminium wheel rims. Suitable for use with Model No's TC960, TC961 and TC962. Also compatible with other makes of manual tyre changer.• Tyre bar fitted with nylon ferrules to prevent damage to aluminium wheel rims.
• Suitable for use with Model No's TC960, TC961 and TC962.
• Also compatible with other makes of manual tyre changer.
• Model No. TC963• Tyre bar fitted with nylon ferrules to prevent damage to aluminium wheel rims.
• Suitable for use with Model No's TC960, TC961 and TC962.
• Also compatible with other makes of manual tyre changer.Tyre Bar for Aluminium Wheels

Sealey Tyre Changer Manual OperationSteel construction with manual bead breaker. Suitable for use on most open centred wheels. Supplied with tyre bar. To prevent damage to the rims of the alloy wheel, it is essential to use a TC963 Tyre Bar.• Steel construction with manual bead breaker.
• Suitable for use on most open centred wheels.
• Working Ø Minimum/Maximum: 325/460mm.
• Wheel Depth Minimum/Maximum: 40/203mm.
• Supplied with tyre bar.
• To prevent damage to the rims of the alloy wheel, it is essential to use a TC963 Tyre Bar.
• Model No. TC960• Steel construction with manual bead breaker.
• Suitable for use on most open centred wheels.
• Supplied with tyre bar.
• To prevent damage to the rim of alloy wheels, it is essential to use a TC963 Tyre Bar.Tyre Changer - Manual Operation

Sealey Tyre Changer Pneumatic/Manual OperationHeavy steel construction. Pneumatic bead breaker. Suitable for use on most automotive/light commercial open centred wheels. Supplied with standard tyre bar. To prevent damage to the rims of the alloy wheel, it is essential to use a TC963 Tyre Bar.• Centre cone clamp makes this tyre changer ideal for use with most automotive/light commercial open centre wheels.
• Heavy-duty bead breaker (operating force up to 1250kg) - is able to handle latest safety wheels.
• Wheel Clamping Size: 10"-18" Max.
• Air Consumption: 2cfm.
• Supplied with tyre bar.
• To prevent damage to the rims of the alloy wheel, it is essential to use a TC963 Tyre Bar.
• Model No. TC962• Heavy steel construction. Pneumatic bead breaker.
• Suitable for use on most automotive/light commercial open centred wheels.
• Supplied with standard tyre bar.
• To prevent damage to the rim of alloy wheels, it is essential to use a TC963 Tyre Bar.Tyre Changer - Pneumatic/Manual Operation

Sealey Tyre Inflator Long Type with Twin Push-On ConnectorHeavy-duty extruded aluminium body and zinc head. Linear pressure scale, dual calibrated in psi and bar. 350mm Rubber hose with steel protection sleeve. Fitted with twin push-on air connector.• Heavy-duty extruded aluminium body and zinc head.
• Linear pressure scale dual calibrated in psi and bar.
• Range: 0-9.5bar (0-140psi).
• 350mm Rubber hose with steel protection sleeve.
• Fitted with twin, push-on air connector.
• Model No. SA39• Heavy-duty extruded aluminium body and zinc head.
• Linear pressure scale, dual calibrated in psi and bar.
• 350mm Rubber hose with steel protection sleeve.
• Fitted with twin push-on air connector.Long Type Tyre Inflator with Twin Push-On Connector

Sealey Tyre Inflator with Clip-On ConnectorDie-cast body and dial type gauge with rubber protector. Fitted with single clip-on connector.• Die-cast body and dial type gauge with rubber protector.
• Fitted with single clip-on connector.
• Range: 0-16bar (0-220psi).
• 1/4"BSP Air inlet.
• Model No. SA924• Die-cast body and dial type gauge with rubber protector.
• Fitted with single clip-on connector.Tyre Inflator with Clip-On Connector