Indicators Rear LHD

Left Rear Indicator Lens 

Restore the appearance of your Porsche's rear lighting with this Left Rear Indicator Lens. Designed to bond onto your existing rear indicator unit, this replacement lens offers a cost-effective alternative to replacing the complete lamp assembly. It is ideal for repairing cracked, faded or damaged original lenses while retaining the factory housing.

Fits:

• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93

Please note: This lens must be purchased  as a pair with the matching Right Rear Indicator Lens (96463190811) to ensure both sides match in colour and appearance.

Installation Tip

The original Porsche lens is permanently bonded to the lamp housing, but it can be removed carefully.

A proven method is to place the complete lamp in a conventional oven at 100°C for 7-8 minutes to soften the adhesive before removing the old lens. Alternatively, carefully soften the welded edge using a soldering iron.

When fitting the new lens, ensure a continuous watertight seal around the entire edge to prevent future moisture ingress.

What Does the Indicator Lens Do?

The rear indicator lens protects the lamp assembly while allowing the amber indicator signal to remain bright and clearly visible. It also prevents dirt, water and road debris from entering the light unit, helping to protect the bulb and reflector.

Why Do They Fail?

Over time, the original lenses are exposed to UV rays, road debris and harsh weather, which can lead to:

• Cracks and chips
• Fading and discolouration
• Surface scratches and clouding
• Water ingress into the lamp unit

A damaged lens reduces visibility and detracts from the appearance of your Porsche.

When Should It Be Replaced?

Replace the lens if it becomes:

• Cracked or broken
• Faded or cloudy
• Leaking water into the light unit
• Damaged during accident repairs
• Worn as part of a restoration project

For the best appearance, both left and right lenses should always be replaced together.

Porsche 964 Rear Lighting Components

As Porsche 964 models age, rear indicator lenses often become faded, cracked or damaged, while the original lamp housing remains perfectly usable. This OE Match replacement lens allows you to refurbish the existing lamp assembly, preserving the factory appearance without the expense of replacing the complete unit.

Ideal for restorations, accident repairs or refreshing tired rear lighting, this replacement lens provides excellent fitment and value.

Benefits of Replacing the Indicator Lens

• Restores indicator clarity
• Refreshes the rear light appearance
• Reuses the original lamp housing
• More economical than replacing the complete lamp
• Helps prevent moisture ingress
• Ideal for restoration projects       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463190711

The product you are viewing cross references to these numbers

Indicator lens for rear light unit
These OE Match indicator lenses are replacement rear light unit indicator lenses for Porsche 964 models. They are available for left and right side rear light units and are designed to match the original-style fitment and appearance.

Fits:
Porsche 964 1990 - 1994
Porsche 964 Turbo

This is Indicator lens for your existing rear indicator unit. Normally the lens is not interchangeable but the clever guys in developments have come up with a solution.

Tip:
a customer has discovered an easy way to get the old glass off, if you put the Light into an ordinary oven at a 100 degrees for 7-8 minutes the glass will come loose or use heat from a soldering iron to un-weld the lens off the unit, and the same to weld the new lens on again, please make sure you have a perfect seal around the edge.

The rear indicator lens forms part of the rear light unit and allows the turn signal light to be clearly visible from the rear of the vehicle. It also helps protect the lamp housing and bulb area from dirt, moisture, and road debris while maintaining the correct Porsche 964 rear lighting appearance.

Functions
• Replaces the indicator lens in the rear light unit
• Provides correct rear turn signal visibility
• Helps protect the rear lamp housing and bulb area
• Restores the original-style rear lighting appearance
• Replaces cracked, faded, cloudy, broken, or missing lenses
• Available for left and right rear side positions
• OE Match replacement for Porsche 964 lighting restoration.

Why Replace This Part?
Rear indicator lenses can become cracked, faded, cloudy, scratched, brittle, or broken due to age, UV exposure, weathering, impact damage, and previous repairs. A damaged lens can reduce indicator visibility, allow moisture into the rear light unit, or make the car look incomplete. Replacing the lens helps restore correct rear lighting function and exterior appearance.

When to Replace This Part
•   The rear indicator lens is cracked, faded, cloudy, or broken
•   The lens is missing or no longer fits securely
•   Moisture or dirt is entering the rear light unit
•   The rear indicator appears dull or incorrect
•   The rear light unit has been removed or serviced
•   Rear bodywork or lighting restoration is being carried out
•   The vehicle is undergoing Porsche 964 restoration.

Where it fits on the car
These lenses fit on the rear light unit indicator section on Porsche 964 models. One lens is used for the left rear light unit and the other for the right rear light unit, depending on the part selected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463190

The product you are viewing cross references to these numbers

Right Rear Indicator Lens 

Restore the appearance of your Porsche's rear lighting with this Right Rear Indicator Lens. Designed to bond onto your existing rear indicator unit, this replacement lens provides a cost-effective alternative to replacing the complete lamp assembly. It is ideal for repairing cracked, faded or damaged original lenses while retaining the factory housing.

Fits:

• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93

Please note: This lens must be purchased as a pair with the matching Left Rear Indicator Lens (96463190711) to ensure both sides match in colour and appearance.

Installation Tip

The original lens is permanently bonded to the lamp housing, but it can be removed carefully.

A proven method is to heat the complete lamp in an oven at 100°C for 7-8 minutes to soften the adhesive before removing the old lens. Alternatively, carefully soften the welded edge using a soldering iron.

When fitting the new lens, ensure a complete watertight seal around the edge to prevent future moisture ingress.

What Does the Indicator Lens Do?

The indicator lens protects the lamp unit while allowing the amber indicator signal to remain bright and clearly visible. It also helps keep dirt and moisture away from the bulb and reflector.

Why Do They Fail?

Years of UV exposure, road debris and weathering can cause the lens to:

• Crack or chip
• Fade or discolour
• Become scratched or cloudy
• Allow moisture into the lamp assembly

Replacing a damaged lens restores both safety and the appearance of the rear light cluster.

When Should It Be Replaced?

Replace the lens if it is:

• Cracked or broken
• Faded or cloudy
• Leaking water into the lamp
• Damaged during accident repairs
• Being renewed as part of a restoration

For the best finish, replace both left and right lenses together.

Porsche 964 Rear Lighting Components

Over time, original Porsche 964 indicator lenses become faded, cracked or damaged, while the lamp housing often remains perfectly serviceable. This OE Match replacement lens allows you to refurbish the original light unit without the expense of replacing the complete assembly, making it ideal for restorations and accident repairs.

Benefits of Replacing the Indicator Lens

• Restores indicator clarity
• Refreshes the rear light appearance
• Reuses the original lamp housing
• More economical than replacing the complete unit
• Helps prevent moisture ingress
• Ideal for restoration projects

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463190811

The product you are viewing cross references to these numbers

Indicator unit rear. Comes with rubber seal.

Note: Recommend professional/experienced seal installation as long sections of the seal need to be held in place with contact adhesive prior to fitting light.
If not familiar with the process, the lights can alternatively be installed with the later seal design using  2x 96463191300, 1x 96463191100  & 1x 96463191200

Fits:
Porsche 964 1990 - 1994

* After market rear lamps do not come with bulb holders please use your existing ones.
** Not compatible with US market.

This LEFT (OE ref no 96463190702) or RIGHT (OE ref no 96463190802) Rear Indicator Units are high-quality replacement signal lamp assemblies designed specifically for the rear indicator positions on Porsche 911 (964) models from 1989 through 1994. These units replicate the original Porsche part’s fit, form, and function for a direct, bolt-on replacement.

These units are ideal for replacing aged, cracked, or damaged originals and help restore correct rear signal appearance and performance on Porsche 964 cars.

Each rear indicator unit houses the turn signal lamp and delivers clear directional signalling at the rear of the vehicle. They protect the lamp from moisture and debris while ensuring light is properly directed through the lens for optimal visibility to other road users.

The rear indicator units secure into the vehicle’s rear quarter panel and connect to the existing harness. The assembly holds the bulb in the correct position and maintains stable electrical contact even under vibration and road conditions. They provide weather-resistant housing to help extend lamp life and ensure consistent signal performance.

Over time, rear indicator units can suffer from cracked housings, corroded connections, or fading electrical contacts, leading to poor signal performance or intermittent operation. Replacing them with OE-match units ensures reliable signalling, restores proper fit, and helps maintain the original look and safety of the rear lighting system.

When to replace:
•  Indicator unit cracks or breaks
•  Intermittent lighting or poor electrical contact
•  Water or moisture entering the housing
•  Lens or signal output appears dim or inconsistent
•  During restoration or rear trim removal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463190

The product you are viewing cross references to these numbers

Indicator unit rear.
Rear lamps do come with bulb holders.

Fits:
Porsche 964 1990-94

European spec light. Will not be compatible with US market.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463190

The product you are viewing cross references to these numbers

Indicator unit seal rear. Inner seal, fits left or right.
Normally needed when fitting new lamps.



Fits:
Porsche 964 1990-94

Click 'Zoom in' for large parts diagram.
Diagram ref. no 22 (inner seal)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463191300

The product you are viewing cross references to these numbers

Indicator unit seal rear. Outer seal.
Normally needed when fitting new lamps.



Fits:
Porsche 964 1990-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 21 (outer seal)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463191

The product you are viewing cross references to these numbers

964 LED Tail Lights.

Fits:
Porsche 964 1989 - 1994

These designed modern tail lights perform as good as they look. Designed to a very high spec, the lenses are milled from solid blocks of acrylic (also known as PMMA) for longevity/precision before meticulously finished for perfect fitment.

Sets includes all lenses and all housings, as well as 4-dot brake and indicators in each corner unit.
Plug-and-play, with all connectors in place for easy installation.
Options: Please contact us for custom lettering for center lens.

NOTE: This product is not DOT certified and has no e-markings, and is therefore only for track or display use.

Please note: This part is on special order terms. Delivery time is normally 5-6 weeks. It is not a subject to cancellation or return if not required. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96463115LED

The product you are viewing cross references to these numbers

Rear indicator heat protection shield.



Fits:
Porsche 964 C2 / C4 1989-94
Porsche 964 Carrera RS 1989-94
Porsche 964 TURBO LOOK
Porsche 964 TURBO 1991-93

Click 'Zoom in' for large parts diagram.
Diagram ref no. 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96450551

The product you are viewing cross references to these numbers