Shock Absorber Parts REAR

Lift kit spacer set for air suspension 2 inch. 
Set of for Front and Rear suspension

Fits:

Porsche Cayenne 3.2L V6 2003>>
Porsche Cayenne S 4.5L V8 2003>>
Porsche Cayenne Turbo 4.5L 2003>>
Porsche Cayenne Turbo S 4.5L 2006>>
Porsche Cayenne 3.0L Diesel 2007>>
Porsche Cayenne 3.6L 2007>>
Porsche Cayenne S/GTS 4.8L 2007>>
Porsche Cayenne Turbo / Turbo S 4.8L 2007>>

2” lift kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty off roading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we replace the weak OEM strut brackets with bigger, wider and thicker units. 

Sway bars may be removed for additional articulation, or retained with use of our Eurowise Sway Bar Links. OEM sway bar links will not clear the reinforced brackets.

Lift your vehicle the proper way, maintaining ride quality without running your vehicle in “Offroad” mode.

Kit Includes:
Front Strut Brackets with Hardware x 4
Rear Cradle Drop Spacers with Hardware x 4
Level Sensor Links with Hardware x 4
Front Level Sensor Mounts x 2
1/2" Subframe Drop Kit x 1

Professional installation recommended. 
Strut bolts MUST be tightened with the suspension loaded.

Disclaimer:
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. 

To correct this geometry, installation of our Eurowise Subframe Drop Kit is recommended.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK14

The product you are viewing cross references to these numbers

Lift kit spacer set for air suspension 3 inch. 
Set of for Front and Rear suspension

Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 3"+ Lift Kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty offroading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we machine our spacers out of solid block 6061 aluminum and replace the weak OEM strut brackets with bigger, wider, and thicker units. 

To achieve 3” of total lift in auto mode, our 3” Air Suspension Lift Kit includes everything from our 2” Air Suspension Lift Kit plus Front Upper Shock Mount Spacers, Front Sway Bar Links, and our 1.5” Subframe Drop Spacer Kit.

On some vehicles, a 3” lift will introduce more positive camber that can be adjusted out with OEM upper control arms. For such applications, we recommend adding our Eurowise Tubular Upper Control Arms.

Professional installation recommended. 

Strut bolts MUST be tightened with the suspension loaded. This is otherwise a direct bolt-on kit that requires only removal of front and rear strut assemblies, and dropping the rear cradle and front subframe.

Disclaimer: 
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. Eurowise is not responsible for damage to axles that occurs due to driving in modes higher than “auto.” Noise from rear suspension may occur due to worn rear air strut mounting bushings. If you experience such noise, Eurowise can supply shorter bushings to resolve the issue.

Due to the design of the suspension geometry adding additional lift will cause the air strut plastic bellow to touch the spindle at full droop only. If you see contact on the lift with the suspension fully drooped it is normal. 

Note: 
This lift kit will max out the suspension level sensor’s functional range. The highest setting on the air suspension controller will no longer lift it any higher.

Kit Includes:
Front Strut Brackets with Hardware x 4
Level Sensor Links with Hardware x 4
Front Upper Shock Mount Spacers with Hardware x 6
Front Sway Bar Links x 2
1.5" Subframe Drop Kit with Hardware x 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK16

The product you are viewing cross references to these numbers

Rear air suspension pressure holding valve

Fits:
Porsche Cayenne (955) 3.2 (10/03-09/07)
Porsche Cayenne (955) S 4.5 (09/02-09/07)
Porsche Cayenne (955) Turbo 4.5 (09/02-09/07)
Porsche Cayenne (955) Turbo S 4.5 (01/04-09/07)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95535873002

The product you are viewing cross references to these numbers

Rear shock absorber air spring.

Fits:
Cars with Air Suspension
Porsche 955 Cayenne V6 - 2003 to 2010
Porsche 955 Cayenne Diesel - 2009 to 2010
Porsche 955 Cayenne S V8 - 2002 to 2010
Porsche 955 Cayenne turbo / turbo S V8 - 2002 to 2010

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95535850332

The product you are viewing cross references to these numbers

Rear Shock Absorber Bump Stop. 

Sold Each.
x2 Required Per Car.

Fits:
Porsche 9PA Cayenne (955) 2003>>2006
Porsche 9PA1 Cayenne (957) 2007>>2010
Cars With Option Codes:
1BK - Air Suspension With Levelling System And Height Adjustment (PASM)

Diagram Ref No 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533310530

The product you are viewing cross references to these numbers

Lift kit spacer set for steel springs - 75mm. 
Set of 4 lift spacers (2 x frontt / 2 x rear)

Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Product Description

Lifting your Cayenne or Touareg has never been easier with our 75mm lift kit. Simply install the billet blocks on top of your factory shock assembly and the smaller pucks between the subframe and body to achieve a full 75mm lift. Our kit is machined from 7075 aerospace grade aluminum finished in hard black anodise and comes with zinc plated proprietary hardware for an easy installation. This kit was designed to work seamlessly with your OEM control arms to give you the maximum lift without the need for swapping out the rest of your factory setup.

• Fits all 955/957 Touareg 1/2 without Air Ride
• Requires alignment after installation
• Does not max out factory alignment adjustments
• Made from Aerospace grade aluminum

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S182

The product you are viewing cross references to these numbers

Shock absorber bellow. REAR axle.

Fits:
Porsche 955 Cayenne 2003-06 (I1BK)
Porsche 957 Cayenne 2007-10 (I1BK)

I1BK - for cars with Air Suspension with levelling system and height adjustment (PASM)

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534350510

The product you are viewing cross references to these numbers

Shock absorber bellow. REAR axle.

Fits:
Porsche 955 Cayenne 2003-06 (I1BK)
Porsche 957 Cayenne 2007-10 (I1BK)

I1BK - for cars with Air Suspension with levelling system and height adjustment (PASM)

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534350510

The product you are viewing cross references to these numbers

Shock absorber bump stops and dust covers. Rear Axle.

Fits:
Porsche 955 Cayenne (I1BA) 2003-06
Porsche 957 Cayenne (I1BA/I1BW) 2007-10

I1BA - Cars with Standard Suspension
I1BW - Cars with Comfort Suspension (steel spring)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11 and 12.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533310520

The product you are viewing cross references to these numbers

Shock absorber coil spring rear seating bush Porsche Cayenne 955 / 957
Cars without Air Suspension

Fits:
Porsche Cayenne 955 Rear
Porsche Cayenne 957 Rear (cars with standard suspension I1BW)

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534352700

The product you are viewing cross references to these numbers

Shock absorber coil spring rear seating bush Porsche Cayenne 955 / 957
Cars without Air Suspension

Fits:
Porsche Cayenne 955 Rear
Porsche Cayenne 957 Rear (cars with standard suspension I1BW)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534352800

The product you are viewing cross references to these numbers

Shock Absorber Concave Support. Rear Axle.

Fits:
For cars without Air suspension
Porsche 955 Cayenne 2003-06 (I1BA)
Porsche 957 Cayenne 2007-10 (I1BA / I1BH / I1BW)

* I1BA - For cars with Standard suspension
* I1BH - For cars with Standard 2 PASM
* I1BW - For cars with steel springs

Click 'Zoom in' for large parts diagram.
Diagram ref no. 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533307100

The product you are viewing cross references to these numbers

Shock Absorber Concave Support. Front Axle.

Fits:
For cars without Air suspension
Porsche 955 Cayenne 2003-06 (I1BA)
Porsche 957 Cayenne 2007-10 (I1BA / I1BH / I1BW)

* I1BA - For cars with Standard suspension
* I1BH - For cars with Standard 2 PASM
* I1BW - For cars with steel springs

Click 'Zoom in' for large parts diagram.
Diagram ref no. 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534307110

The product you are viewing cross references to these numbers

The OE Match shock absorber mounting supports the damper attachment, it is suitable for front or rear mounting positions.

Fits
For cars with (I1BK) Air suspension with levelling system and height adjustment (PASM)

• Porsche 955 Cayenne 2003–06
• Porsche 957 Cayenne 2007–10
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  Diagram ref no 5 (front) or 7 (rear)
  
  Required Quantity

Two mounts are required for each applicable front or rear axle assembly.

What Is This Part?

This is a supporting mount within the shock absorber attachment assembly. It works with the associated mounting bracket and fixings to keep the damper correctly seated and supported. The mount is a separate service component, so its condition should be checked when investigating suspension noise or removing a strut. Correct selection depends on the vehicle’s suspension equipment as well as its model and year.

What Does This Part Do?

• Supports the damper attachment: Provides support at the shock absorber mounting point.
• Maintains seating: Helps locate the damper correctly within its mounting assembly.
• Works with the fixing hardware: Forms part of the attachment together with the bracket, bolts and nuts.
• Controls unwanted movement: A sound mount helps prevent looseness at the damper attachment.
  
  Why Replace This Part?

A worn or damaged mount may no longer support the damper correctly and can contribute to knocking or movement at the attachment. Replacement is appropriate when inspection confirms deterioration, damage or poor seating, rather than simply because the vehicle has developed a suspension noise.

When a damper is removed, check the mount, bracket and fixing hardware together. Reusing a visibly damaged mount can leave an existing attachment problem unresolved even after the damper itself has been renewed.

When to Replace This Part?

• Visible deterioration: Cracking, separation, distortion or other damage found during inspection.
• Poor seating: The mount no longer sits correctly against the adjoining components.
• Confirmed mounting play: Movement traced to the mount after checking the fixings and surrounding assembly.
• Knocking over bumps: Investigate the mount alongside suspension bushes, joints and other possible sources.
• During strut removal: Replace if inspection reveals wear or damage; removal alone does not make replacement mandatory.
  
  Where Is This Part Fitted?

Location: At the shock absorber support mounting within the applicable front or rear suspension strut assembly, where it works with the mounting bracket and associated fixings.

Product Summary

• Product: Shock absorber supporting mount.
• Brand: OE Match.
• Part number: 95534301810.
• Position: Applicable front or rear damper mounting.
• Suspension equipment: Air suspension with levelling and height adjustment, PASM.
• Purpose: Supports and locates the damper attachment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534301810

The product you are viewing cross references to these numbers

Shock absorber mounting. Fits: front or rear.

Fits:
For cars with (I1BK) Air suspension with levelling system and heght adjustment (PASM)
Porsche 955 Cayenne 2003-06
Porsche 957 Cayenne 2007-10

Click 'Zoom in' for large parts diagram.
Diagram ref no 5 (Front) or 7 (Rear)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534301810

The product you are viewing cross references to these numbers

Shock absorber rubber stop. Rear Axle.

Fits:
Porsche 955 Cayenne (I1BA) 2003-06
Porsche 957 Cayenne (I1BA/I1BW) 2007-10

I1BA - Cars with Standard Suspension
I1BW - Cars with Comfort Suspension (steel spring)

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533310520

The product you are viewing cross references to these numbers