Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png +443456003478 https://www.design911.co.uk Facebook Instagram

Manufacturer's Highlight

Performance Parts & Upgrade Products
We offer the ultimate in high performance Porsche products from the worlds leading car parts manufacturers.

OE Match - Porsche Parts

OE Match
The Future of Automotive Parts

PRODUCT HIGHLIGHT

Exhaust

Exhaust Systems for all High Performance Cars

Our exhaust range extends from complete systems to small parts like gaskets for all classic models 356, 912, 911 right though to the modern models 991, Macan, Panamera. 

We offer a comprehensive range of OEM replacement products, upgrade or high performance sports stainless steel exhaust systems from Fabspeed, Milltek, Remus, DesignTek. Choosing the best high performance exhaust can improve your whole driving experience. 

Recent Products

Lateral support clamp anti roll bar. Various sizes for Porsche
Code: PFC
Lateral support clamp anti roll bar. 

powerflex

Anti-Roll Bars (ARB’s) play an important role in a vehicle’s suspension system, helping to reduce body roll by transferring cornering load from one side of a vehicle to the other.

Often mounted to the vehicle’s chassis with rubber bushes, these bushes ensure the bar works as intended. To prevent the anti-roll bar from moving laterally within its mounts when turning, OE manufacturers will either bond the bushes to the bar, add dead-stops to the bar itself, or rely solely on the clamping pressure of the rubber.

But what happens when those bushes wear and need to be replaced? Often anti-roll bars with bonded bushes come as a costly complete assembly, so the alternative is to fit a more cost-effective unbonded polyurethane replacement, like the many we offer.

In most cases, friction from the bush will prevent any side-to-side bar movement. Still, when turning aggressively or cornering at higher speeds, a laterally shifting anti-roll bar decreases the efficiency and effectiveness of the bar, changing the dynamics of your suspension system in unpredictable ways. It also poses the risk of the bar fouling on other areas of the vehicle or suspension system.


Best Price
Engine inlet sleeve kit Powerflex. Porsche 996 GT3 / 997.1 GT3
Code: PFR57-526K
Engine inlet sleeve kit - Powerflex.
Sold as a set of 6 x sleeves, 12 x hose clamps

powerflex

Fits:
Porsche 996 GT3 / GT3 RS - 1999 to 2004
Porsche 997.1 GT3 / GT3 RS - 2007 to 2008

Now a mainstay of Porsche‘s illustrious 911 range, the first generation GT3 debuted in 1999 as a stripped-down version of its 5th generation 996.

Lighter, more precise and with an engine derived from Porsche’s GT1 supercar, this immaculate combination set petrol-fuelled pulses racing and turned an accomplished but regular sports car into an all-out track weapon.

Fast forward some 24 years, and the 996 GT3 and later 997.1 GT3 remain as exciting today as they were then with owners wishing to keep them that way, so the last thing you’d want is your precision-built homologation special to lose power due to something as simple as an old, cracked rubber intake sleeve losing its seal, leading to idling issues and poor running due to incorrect fueling.

Supplied as an engine set of 6, our new PFR57-526K Engine Intake Sleeve Kit is made in our Dark Grey 80A polyurethane material for an OE aesthetic with increased durability and reliability over the equivalent rubber items

Each sleeve is designed and engineered to seal and link both sides of the intake system, with the supplied high-quality, stainless-steel hose clamps ensuring a tight fit and consistent engine vacuum, making them a must-have for any engine build



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-526K
99611068790
99611068791
99611068792
99951234902
99951234901

The product you are viewing cross references to these numbers
Best Price
ExactFit Magnetic Phone Mount. Porsche 970 Panamera
Code: PM01.101
Rennline ExactFit Magnetic Phone Mount.

rennline

Fits:
Porsche 970.1 Panamera - 2009 to 2013
Porsche 970.2 Panamera - 2014 to 2016


In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit Magnetic Phone Mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available.

Please Note:
** Standard magnet is not compatible with MagSafe Phones without the addition of the included steel pad. If applying steel pad to MagSafe phones keep in mind this will interfere with the wireless charging. If you would like to keep the wireless charging please see PM70 our wireless induction charger**

Best Price
ExactFit Magnetic Phone Mount. Porsche 970 Panamera wireless charging with Magsafe
Code: PM70.101
ExactFit Magnetic Phone Mount. Porsche 970 Panamera wireless charging with Magsafe

rennline

Fits:
Porsche 970.1 Panamera - 2009 to 2013

Porsche 970.2 Panamera - 2014 to 2016

Introducing Rennline's ExactFit Magnetic Phone Mounts – the perfect phone mounting solution. No more flimsy mounts or damaging attachments to your vehicle’s interior. Our tailored mounts fit your specific model, installing easily in minutes. Built with durable metal components for long-lasting reliability and an OEM+ appearance.

  • Available with a standard magnet or induction charger with MagSafe compatibility
  • Only vehicle specific phone mount on the market for European car makes
  • Re-uses OEM hardware where applicable (depends on vehicle application)
  • 17mm aluminum ball mount (compatible with any accessory that uses same diameter ball)
  • Mount bracket constructed of 20-gauge steel and powder coated satin black
  • Includes adhesive backed ring for phone or case for use on non MagSafe phones
  • MagSafe wireless induction charger capable of max output of 15w (Qi standard)
  • USB-USB-C cable included with wireless charging option


Best Price
Control arm (Slim type) 'Coffin Arm' Porsche 987 / 997 / 987 / 718 Rear
Code: 99634105319/S::1
Wishbone control arm with lower ball joint. New Slim type design

oematch

rear
Fits:
Porsche 987 Boxster 2005-08 Rear
Porsche 987C Cayman 2006-08 Rear

Porsche 987.2 Boxster 2009-12 Rear
Porsche 987C.2 Cayman 2009-12 Rear

Porsche 981 Boxster 2012-16 Rear
Porsche 981C Cayman 2014-16 Rear

Porsche 982 (718) Boxster including Spyder 2017-24 Rear
Porsche 982C (718) Cayman 2017-24 Rear

Porsche 997 C2 / C4 / C4S / Turbo / GT3 2005-08 Rear
Porsche 997.2 C2 / C4 / C4S / Turbo / GT3 2009-12 Rear

Please note this arm is not an adjustable type (not motorsport - M004 option)

Please click 'Zoom in' to view the diagram (No 21)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634105319
99733105301
99733105302
99733105303
98133105301
98133105302
98133105300

The product you are viewing cross references to these numbers
Best Product
Rennline door mirror covers carbon fibre LHD. Porsche 970 Panamera
Code: E326
Rennline door mirror covers carbon fibre LHD. 
Sold as a pair - left and right 

rennline

Fits:
Porsche 970.1 Panamera - 2009 to 2013
Porsche 970.2 Panamera - 2014 to 2016
Left Hand Drive only (LHD)
Will not work on vehicles with Lane Change Assist or Lane Departure Warning options

Product Description

Rennline's carbon fiber mirror shells are a great way to give your Porsche a subtle yet modern exterior upgrade. Made from high-quality carbon fiber using the latest technology, our mirror shells are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. Take your old plastic pieces out and install ours in their place. Installs in minutes reusing the factory hardware.

  • Made from high-quality carbon fiber using the latest manufacturing technologies
  • Designed from the OEM mirrors for a factory fit and finish
  • Highly durable and resists common wear & tear
  • Reuses OEM hardware
  • Installs in minutes using basic hand tools



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E326
97073161900G2L
97073161904G2L
97073162002G2L
97073161906G2L
97073162000G2L
97073162004G2L
97073162006G2L
97073171900
97073171904
97073171906
97073171908
97073172000
97073172004
97073172006
97073172008

The product you are viewing cross references to these numbers
Best Price
Ashtray delete cubby pocket. Porsche 911
Code: 91155205004/1
Ashtray delete cubby pocket. 
Fits Left and Right Hand Drive cars

retroline

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. Designed specifically to seamlessly fit your G-body Porsche 911, the goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Best Price
Auxiliary Spotify Car Thing accessory mount. Porsche 911
Code: 91155205003/1
Auxiliary Spotify Car Thing accessory mount. 
Fits Left and Right Hand Drive cars

retroline

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. This is the third accessory mount in our upcoming collection, designed specifically to seamlessly fit your G-body Porsche 911. The goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

Spotify Car Thing is perfect accessory for those who decided to remove the radio, but prefer a built in convenience to control the music.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Please Note:
Spotify "Car Thing" as well as magnetic mount are not part of this sale, both come with your Spotify accessory. Power supply is not included, it's also optional (check amazon for 12v to usb-c power supply).

Listing is only for the accessory mount and required hardware.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Best Price
Auxiliary dash single gauge mount 52mm. Porsche 911
Code: 91155205002/1
Auxiliary dash single gauge mount for 52mm diameter gauge. 
Fits Left and Right Hand Drive cars

retroline

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. This is the second accessory mount in our upcoming collection, designed specifically to seamlessly fit your G-body Porsche 911. The goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Best Price
Auxiliary dash twin gauge mount 52mm. Porsche 911
Code: 91155205001/1
Auxiliary dash twin gauge mount for 52mm diameter gauges. 
Fits Left and Right Hand Drive cars

retroline

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. This is the first accessory mount in our upcoming collection, designed specifically to seamlessly fit your G-body Porsche 911. The goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Best Price
Air conditioning housing internal evaporator core ONLY, RHD cars. Porsche 986 / 996 / 987 / 997
Code: 99657390101/1
Air conditioning housing internal evaporator core ONLY RHD cars.
RHD cars only

oematch

Fits:
For cars with air conditioner (M573)
Porsche 986 Boxster 1997-04
Porsche 996 Carrera 1998-04
Porsche 996 Turbo 2001-05
Porsche 996 GT3 1999-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 1



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99657390101
99657390101

The product you are viewing cross references to these numbers
Best Product
Radio delete cubby pocket. Porsche 911
Code: 91155246302/1
Radio delete cubby pocket.

retroline

Fits:
Porsche 911 - 1974 to  1989

When removing the radio, it was impossible to find a replacement cubby that fit perfectly, maximized the space, and looked like it was meant to be there. All aftermarket cubbies were either too thin, poorly fitting, or impossible to mount, and none of them had a well-finished surround trim.

Now offering this radio delete cubby pocket to anyone who wants to utilise the space for more storage instead of using available block-off plates. The pocket is made from PA12 nylon, making it very durable and resistant to heat, chemicals, and wear. The finish texture resembles typical car plastic parts.

Inside dimensions of the pocket:

Width: 177mm / 6.95"
Height: 44mm / 1.73"
Depth: 102mm / 4" (deep enough to hold a phone but not too deep to make it hard to pull items out)

Installation involves sliding the pocket into the opening, then sliding four retaining blocks (three on the bottom, one on the top) from the back of the pocket into the guides. These blocks securely attach the pocket against the metal dash. After the blocks are in place, use a thin needle or nail to align the nuts inside the blocks with the holes in the pocket. Finally, fasten everything with seven screws (this needs to be done inside the pocket, so it’s best to use a Phillips head screwdriver attachment; finger tight should be enough—do not over-tighten).

Included:

  • Pocket
  • 4 mounting blocks
  • 7 screws



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155246302
91155246302
9115524630270B

The product you are viewing cross references to these numbers
Best Price
Centre console gauge pod. Porsche 986 Boxster / 996
Code: 996522CGF
Centre console gauge pod. 

retroline

Fits:

Porsche 986 Boxster - 1997 to 2004
Porsche 996 - 1997 to 2005

If you have deleted your center dash or are planning to, but still want to keep or add an auxiliary gauge while maintaining a clean, minimalistic OEM look, this product is for you.

The idea came when considering removing my center dash but hesitated because I didn't want to lose the air/fuel ratio gauge. There was nothing on the market that allowed for adding a gauge once the center dash was removed, so it was decided to create one.

The gauge holder has an open bottom to accommodate various gauge depths. The gauge is held in place by friction, with the diameter of the opening slightly more than 52mm to account for slight variations in gauge diameters between manufacturers. For a snug and secure fit, you can add a bit of tape around the gauge.

This fits Porsche 911 (1999-2005) 996 generation as well as the Boxster 986.

The part is made from highly durable and heat-resistant HP PA 12 nylon. It is dyed black to resemble typical car plastics but can be finished to match your interior.

Please note - Gauge in picture is not included

Best Price
Storage tray retrofit centre console. Porsche 996 Coupe / 986 Boxster
Code: 99655209500/1

Storage tray retrofit centre console

retroline

Fits:
Porsche 986 Boxster - 1997 to 2004
Porsche 996 - 1997 to 2005 (Coupe models only)

This is a full replacement of the ashtray/window switch panel, transforming it into a double window switch with a larger storage cubby.
Please note: The window switches shown are for demonstration purposes only and are not included. You will need to reuse your existing switches.

The idea behind this upgrade is simple: all coupes (Carrera, turbo, GT2, GT3, etc.) come with a center console panel designed to accommodate four window switches (primarily used in convertibles). As a result, coupe owners end up with two blank dummy buttons in their consoles. No one needs those blanks or an ashtray; what we do need is a place to store small to medium items like a phone.  A socket for the ashtray lightbulb has been added to illuminate contents in darkness.

The main goal is to maintain a stock appearance. This cubby blends in perfectly, following the curves of the center console to fit seamlessly. You may notice small enhancements such as the angled position of the buttons and a small ridge between them. These features provide more tactile separation between the button switches, making it easier to identify the correct switch without looking. How many times have you or your passenger opened the wrong window? This design aims to prevent that.

Manufactured with PA12 Nylon, this product is strong, durable, and heat resistant.




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655209500
99655209500
99655209500B12
98655290100B12
99655209501D05
99655209501C02
99655209501A03

The product you are viewing cross references to these numbers
Best Price
Mobil 1™ ESP X4 0W-40 Advanced Synthetic Technology Engine Oil, 5L
Code: 157814
Mobil 1™ ESP X4 0W-40
Advanced Synthetic Technology Engine Oil

mobil
5 Litre Bottle

Mobil 1™ ESP x4 0W-40 is an advanced synthetic technology engine oil specifically designed to provide outstanding performance for high powered 
engines, providing outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy(1) (2).  Mobil 1™ ESP x4 0W-40 has been expertly engineered to help prolong the life in new emerging gasoline powered European vehicles. It is the latest technology developed within the framework of the collaboration established with Porsche AG for over the past 25 years.

Features and Benefits

Mobil 1 ESP x4 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Gasoline Particulate filters (GPF's). Mobil 1 ESP x4 0W-40 has been designed to help deliver outstanding performance and protection in conjunction with advanced fuel economy benefits. Key features and potential benefits(3) include:

Active cleaning agents:
Contributes to deliver outstanding engine cleanliness and sludge control

Outstanding high-temperature thermal and oxidation stability:
Helps to reduce oil aging for protection throughout your oil drain interval

Enhanced frictional properties:
Helps improve fuel economy

Excellent low temperature capabilities:
Quick cold weather performance to help provide protection at start-up

High temperature oil film resistance:
Contributes to outstanding wear protection.

Applications:

Mobil 1 ESP 
4x 0W-40 is recommended for high-performance gasoline or Diesel engines equipped with GPF or DPF (particulate filters) and selected gasoline engines without GPF.

•  Mobil 1 ESP x4 0W-40 is particularly recommended in modern Audi, Bentley, Lamborghini, Mercedes AMG and Porsche high power engines calling for A40 / C40 / VW 511 00 / MB 229.52 oil specifications.(4)

•  Mobil 1 ESP x4 0W-40 is not suitable for Porsche vehicles requiring a an C20, C30 or C40 GT approved Mobil 1 engine oil. Mobil 1™ ESP X4 0W-40 cannot be used in Porsche GT engines.  There is a separate Mobil 1 product for GT engines, Mobil 1™ C40 GT 0W-40.

Notes:
(1): according to VW PV1496 FE tests.
(2): Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.
(3): Based on industry and OEM standard engine tests.
(4): Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications.

Specifications and Approvals:

•  This product has the following approvals:
Porsche C40
VW 511 00
MB-Approval 229.52
MB-Approval 229.51
Porsche A40

•  This product is recommended for use in applications requiring:
API CF

•  This product meets or exceeds the requirements of:
API SP
ACEA C3
FIAT 9.55535-S2

Everything you need to know about oil please see:
Porsche Oils overview



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

157814
00004321093
157814
0W-40

The product you are viewing cross references to these numbers
Best Price
Mobil 1™ ESP X4 0W-40 Advanced Synthetic Technology Engine Oil, 1L
Code: 157813
Mobil 1™ ESP X4 0W-40
Advanced Synthetic Technology Engine Oil

mobil
1 Litre Bottle

Mobil 1™ ESP x4 0W-40 is an advanced synthetic technology engine oil specifically designed to provide outstanding performance for high powered 
engines, providing outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy(1) (2).  Mobil 1™ ESP x4 0W-40 has been expertly engineered to help prolong the life in new emerging gasoline powered European vehicles. It is the latest technology developed within the framework of the collaboration established with Porsche AG for over the past 25 years.

Features and Benefits

Mobil 1 ESP x4 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Gasoline Particulate filters (GPF's). Mobil 1 ESP x4 0W-40 has been designed to help deliver outstanding performance and protection in conjunction with advanced fuel economy benefits. Key features and potential benefits(3) include:

Active cleaning agents:
Contributes to deliver outstanding engine cleanliness and sludge control

Outstanding high-temperature thermal and oxidation stability:
Helps to reduce oil aging for protection throughout your oil drain interval

Enhanced frictional properties:
Helps improve fuel economy

Excellent low temperature capabilities:
Quick cold weather performance to help provide protection at start-up

High temperature oil film resistance:
Contributes to outstanding wear protection.

Applications:

Mobil 1 ESP 
4x 0W-40 is recommended for high-performance gasoline or Diesel engines equipped with GPF or DPF (particulate filters) and selected gasoline engines without GPF.

•  Mobil 1 ESP x4 0W-40 is particularly recommended in modern Audi, Bentley, Lamborghini, Mercedes AMG and Porsche high power engines calling for A40 / C40 / VW 511 00 / MB 229.52 oil specifications.(4)

•  Mobil 1 ESP x4 0W-40 is not suitable for Porsche vehicles requiring a an C20, C30 or C40 GT approved Mobil 1 engine oil. Mobil 1™ ESP X4 0W-40 cannot be used in Porsche GT engines.  There is a separate Mobil 1 product for GT engines, Mobil 1™ C40 GT 0W-40.

Notes:
(1): according to VW PV1496 FE tests.
(2): Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.
(3): Based on industry and OEM standard engine tests.
(4): Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications.

Specifications and Approvals:

•  This product has the following approvals:
Porsche C40
VW 511 00
MB-Approval 229.52
MB-Approval 229.51
Porsche A40

•  This product is recommended for use in applications requiring:
API CF

•  This product meets or exceeds the requirements of:
API SP
ACEA C3
FIAT 9.55535-S2

Everything you need to know about oil please see:
Porsche Oils overview



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

157813
157813
00004321093

The product you are viewing cross references to these numbers
Best Price
Distributor clamping bow billet aluminium. Porsche 914 / 912E
Code: 021905250/1
Distributor clamping bow billet aluminium. 

oematch

Fits:
Porsche 914  - 1970 to 1976
Porsche 912E -  1976

This billet distributor clamp is a must for all 914, 912E and VW type 4 engines.

Designed In-house using CAD technology and manufactured from 6061-T6 aluminium billet
This type billet distributor camp ensures that the timing of your distributor will not change and your engine will stay in tune.

No modifications are required and the long threaded, stainless steel stand off makes timing adjustments a breeze.

Hard anodized in Silver or Black

Click 'Zoom in' for large parts diagram.
Diagram ref no 11



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

021905250
021905250

The product you are viewing cross references to these numbers
Best Product
Velocity stack 46mm. Porsche 911 1965-76
Code: 91111032201
Velocity stack - 46mm bore diameter. 
Sold each - 6 required per car

pmo

Fits:
Porsche 911 - 1965 to 1973
Porsche 911 2.7 Carrera MFI - 1974 to 1976

Enhance the engine compartment of your Classic Porsche with a high-quality reproduction of a long-discontinued Porsche part.
Designed using SolidWorks CAD and precisely molded for a perfect fit with a period correct look
HDPE construction with reinforced mounting tabs

These velocity stacks will fit the following applications:
3 barrel Weber and Zenith Carburetors
Porsche Mechanical Fuel Injection Throttle Bodies

Will not fit PMO Induction Carburetors or EFI Systems

Measures 2” Tall with a 46mm Bore 

Sold Individually, Order (6) and Make Your Engine Look Like New

Click 'Zoom in' for large parts diagram.
Diagram ref no 30




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91111032201
PCG10832201
91110832201
90110093301

The product you are viewing cross references to these numbers
Best Price
Velocity stack 42mm. Porsche 911 1965-76
Code: 91111032203
Velocity stack - 42mm bore diameter. 
Sold each - 6 required per car

pmo

Fits:
Porsche 911S - 1970 to 1973

Enhance the engine compartment of your Classic Porsche with a high-quality reproduction of a long-discontinued Porsche part.
Designed using SolidWorks CAD and precisely molded for a perfect fit with a period correct look
HDPE construction with reinforced mounting tabs

These velocity stacks will fit the following applications:
3 barrel Weber and Zenith Carburetors
Porsche Mechanical Fuel Injection Throttle Bodies

Will not fit PMO Induction Carburetors or EFI Systems

Measures 2” Tall with a 42mm Bore 

Sold Individually, Order (6) and Make Your Engine Look Like New

Click 'Zoom in' for large parts diagram.
Diagram ref no 30




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91111032203
PCG10832201
91110832201
90110093301

The product you are viewing cross references to these numbers
Best Price
Velocity stack 38mm. Porsche 911 1965-76
Code: 91111032202
Velocity stack - 38mm bore diameter. 
Sold each - 6 required per car

pmo

Fits:
Porsche 911 - 1965 to 1969
Porsche 911 E Sportomatic - 1970 to 1973

Enhance the engine compartment of your Classic Porsche with a high-quality reproduction of a long-discontinued Porsche part.
Designed using SolidWorks CAD and precisely molded for a perfect fit with a period correct look
HDPE construction with reinforced mounting tabs

These velocity stacks will fit the following applications:
3 barrel Weber and Zenith Carburetors
Porsche Mechanical Fuel Injection Throttle Bodies

Will not fit PMO Induction Carburetors or EFI Systems

Measures 2” Tall with a 38mm Bore

Sold Individually, Order (6) and Make Your Engine Look Like New

Click 'Zoom in' for large parts diagram.
Diagram ref no 30




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91111032202
PCG10832201
91110832201
90110093301

The product you are viewing cross references to these numbers
Best Price

Porsche Parts, Porsche Spares and Accessories

Design911 is renowned as a leading supplier of dedicated parts for Porsche enthusiasts, catering to a wide range of Porsche models. From the classic 356, 912, and iconic 911s to the cutting-edge Macan, Panamera, and the electric marvel, the Taycan, we've got you covered. 

Operating from strategically located distribution centers in both the United Kingdom and the Netherlands, we are well-equipped to meet your Porsche parts needs. We proudly hold the distinction of being the largest Porsche parts specialist serving garages, workshops, and body shops across the industry. 

Our extensive experience in the Porsche automotive sector is the cornerstone of our commitment to providing our customers with the latest information and comprehensive technical support. Your Porsche deserves the best, and at Design911, we ensure that you get nothing less.