do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Your Porsche
Fabspeed
Fabspeed for Porsche
Here at Fabspeed Motorsport, we are dedicated to delivering our customers the highest quality performance upgrades with the industry’s best lifetime warranty. We have over 29 years experience designing, engineering and installing high performance Porsche exhaust systems, air intake systems and ECU tuning for the world’s most coveted exotic cars. All of our products are designed and engineered right here in Fort Washington, Pennsylvania by our very skilled and passionate fabricators
A Quick Look at Fabspeed
Fabspeed information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Fabspeed is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons people replace these parts include upgrading tired or corroded factory exhaust components, tailoring sound and response for fast-road or track use, and supporting wider tuning packages.
- Common symptoms that lead owners to inspect or change related parts include exhaust leaks, rattles, drone, heat-related fatigue, and loss of performance that may also be linked to boost or vacuum issues.
- After installation, it is sensible to refresh mounts and hardware where worn, and to carry out a careful check for leaks once everything has heat-cycled.
- Consider whether supporting ECU mapping or health checks are appropriate for your Porsche, depending on how extensive your hardware changes are.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Tuning — Engine tuning parts and upgrades for Porsche are used to improve drivability, throttle response and power, or to support changes such as intake, exhaust, or forced induction. They are typically chosen once the engine is in good health, as tuning cannot compensate for underlying mechanical faults.
- Before any significant tuning work, check overall engine condition, including compression or leak-down where appropriate, fuel system health, sensor data, and that there are no boost or vacuum leaks.
- Avoid using calibration changes to hide rough running or misfires, as the mechanical root cause still needs to be addressed.
Air Filters — Air filters for Porsche protect the engine from dirt while maintaining the airflow that correct fuelling and performance depend on. Owners often replace or upgrade filters to restore airflow, support tuning work, or improve serviceability while keeping good filtration.
- Service intervals depend on use: dusty environments or frequent track days may justify more frequent inspection and cleaning or replacement.
- If using oiled performance filters, follow the manufacturer’s oiling instructions carefully to avoid contaminating sensitive airflow sensors.
Air Induction Kits — Induction kits for Porsche replace or re-route parts of the intake system to change airflow, response and sound. They are usually part of a wider tuning package and are selected to balance intake temperatures, flow and sensor stability.
- When fitting an induction kit, ensure joints and connections are well sealed to prevent unmetered air entering the engine or causing drivability issues.
- Positioning and heat management are important: shielding from hot engine-bay air helps keep intake temperatures, and therefore performance, more consistent.
Exhausts — Exhaust upgrades for Porsche are commonly chosen to replace corroded or leaking factory systems, refine the car’s sound, reduce weight or improve gas flow as part of a tuning package. The right choice depends on how the car is used and the balance you want between sound, comfort and responsiveness.
- When planning an exhaust change, consider the complete system, including catalytic converters, to keep within your local emissions and noise requirements.
- Replacing aged gaskets, clamps, mounts and rusted fixings at the same time as the exhaust usually improves fitment and reduces the chance of future leaks or rattles.
All Silencers / Mufflers — This category covers a range of Porsche silencer and muffler layouts, from standard-style replacements to sport and valved options. Selection is usually guided by corrosion or damage to existing parts, unwanted noise or drone, or a desire to change the exhaust character while staying within comfort and usage needs.
- To narrow down the correct layout, compare inlet and outlet positions, hanger locations and pipe diameters on your current system against the product details.
- When choosing between standard, sport or switchable systems, think about typical journeys and cabin noise tolerance so you end up with a sound level that suits day-to-day use.
Explore Fabspeed at Design911
View the current Fabspeed range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Fabspeed RACE Sport Exhaust Performance Package PSE, WITH Performance Software, Polished Stainless Steel Tips.
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
- Fabspeed Race Headers with catalytic-converter bypass
- Valvetronic Center Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- BMC F1 Replacement Air Filters
- XperTune Performance Software required by Fabspeed for this configuration
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991RVPKGPSEPE
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Fabspeed STREET Sport Exhaust Performance Package PSE, Polished Stainless Steel Tips.
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
Fabspeed Sport Headers
200-cell HJS Sport Catalytic Converters
- Valvetronic Center Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- BMC F1 Replacement Air Filters
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991VPKGPSEP
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
The Fabspeed Single Wall Oval Bolt-On Tips are a premium exhaust-finishing upgrade designed for Porsche 993 Twin Turbo applications using factory-style exhaust tip connections.
Fits:
- Porsche 993 (911) TURBO 1995-96
- Porsche 993 (911) GT2 1995-98
- Porsche 993 (911) TURBO S 1995-98
Featuring a slash-cut, single-wall oval design, these tips provide a clean motorsport-inspired alternative to the original Porsche burnt stainless or chrome-plated exhaust outlets.
They are manufactured from high-quality T304L stainless steel, providing excellent resistance to corrosion, exhaust heat and repeated thermal cycling.
Fabspeed currently offers three finishes:
- Brushed
- Polished Chrome
- Satin Black Ceramic Coated
The tips can be installed on the factory Porsche exhaust or compatible Fabspeed mufflers that retain the factory-style tip mounting arrangement.
What This Product Does:
Exhaust tips form the final visible outlet of the vehicle's exhaust system.
Their primary function is to direct exhaust gases away from the rear of the car while providing a finished appearance where the exhaust exits the bumper.
The Fabspeed Single Wall Oval Tips are designed to:
- Replace ageing or damaged factory exhaust tips
- Provide a sharper slash-cut appearance
- Give the rear of the 993 Turbo a more purposeful performance look
- Maintain the original Porsche-style mounting arrangement
- Fit factory exhaust mufflers
- Fit compatible Fabspeed mufflers using Porsche-style outlets
- Provide durable stainless-steel construction
- Allow a choice of three exterior finishes
- Upgrade appearance without replacing the complete exhaust system
These tips are primarily an appearance and exhaust-finishing upgrade rather than a major engine-performance modification.
Symptoms Of Wear Or Failure:
Factory exhaust tips are exposed continuously to high exhaust temperatures, condensation, soot, moisture and road debris.
Common signs that the original tips may need replacement include:
- Heavy surface corrosion
- Pitting
- Permanent heat staining
- Excessive discoloration
- Scratches or scuffs
- Dents caused by impact
- Bent or distorted outlets
- Loose tip mounting
- Rattling while driving
- Excessive movement when touched
- Poor alignment relative to the bumper
- Cracked mounting areas
- Damaged ball-joint connections
- Heavy soot deposits
- Peeling or deteriorated surface finish
- Exhaust-tip contact with surrounding bodywork
Some heat discoloration and soot accumulation are normal on performance exhaust systems and do not necessarily indicate structural failure.
Why Replacement Matters:
Where an original exhaust tip is only faded or scratched, replacement is mainly cosmetic.
However, a loose, damaged or badly misaligned tip can create additional issues.
A deteriorated exhaust tip may:
- Rattle while driving
- Move excessively with exhaust vibration
- Contact the rear bumper
- Mark or damage surrounding trim
- Sit incorrectly within the bumper opening
- Place additional strain on the mounting clamp
- Eventually become loose enough to detach
Replacing a damaged tip helps restore secure exhaust outlet positioning and the correct visual alignment at the rear of the vehicle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993TSWOT
The product you are viewing cross references to these numbers
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Long Tube Competition Race Header System is a motorsport-focused exhaust upgrade developed for the 2014–2016 Porsche 991 GT3, GT3 RS and 911 R.
Fits:
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
Designed specifically for racing, track and closed-course applications, the system replaces the restrictive factory header, catalyst and side-muffler arrangement with a high-flow long-tube exhaust configuration engineered to maximise horsepower, torque and throttle response.
The package combines:
- Long-tube competition race headers
- Burns Stainless high-velocity merge collectors
- Integral side muffler bypass pipes
- Premium Helical exhaust valves
- High-flow T304 stainless-steel construction
The system was developed through CAD modelling, Dynojet testing and track development to improve exhaust flow throughout the engine's operating range.
What This Product Does:
The exhaust headers collect combustion gases as they leave each cylinder and direct them into the remaining exhaust system.
Header length, primary-pipe diameter, collector design and exhaust restriction all influence how efficiently these gases leave the engine.
The Fabspeed Long Tube Competition system is designed to:
- Increase exhaust gas flow
- Reduce exhaust restriction
- Improve exhaust scavenging
- Increase horsepower
- Increase torque
- Improve throttle response
- Strengthen mid-range power delivery
- Improve high-RPM breathing
- Reduce rear exhaust-system weight
- Produce a significantly more aggressive motorsport exhaust note
- Bypass restrictive factory side mufflers
- Provide valved control within the side-muffler bypass arrangement
This system is intended primarily for maximum track performance rather than road-going refinement.
Symptoms Of Wear Or Failure:
Factory GT3 exhaust components are exposed to extreme temperatures, vibration and repeated thermal cycling.
Common symptoms of deteriorating headers, catalysts or side mufflers can include:
- Ticking or tapping from the header area
- Blowing or hissing exhaust leaks
- Black soot around flange connections
- Cracked headers or welds
- Damaged or warped header flanges
- Catalyst rattling
- Reduced high-RPM performance
- Sluggish throttle response
- Excessive exhaust heat
- Metallic rattling from mufflers
- Broken internal muffler components
- Loose exhaust mounting hardware
- Increased exhaust vibration
- Check Engine Light relating to catalyst efficiency
- Sulphur-like smell from a deteriorating catalyst
- Visible heat damage around exhaust joints
Similar symptoms can also result from damaged exhaust gaskets, oxygen sensors or heat shields, so complete diagnosis is recommended before replacing components.
Why Replacement Matters:
A damaged or leaking header can allow extremely hot exhaust gases to escape into the surrounding engine area.
A deteriorating catalyst or internally damaged muffler can also increase exhaust restriction.
Continued use of damaged components may contribute to:
- Reduced engine performance
- Poor throttle response
- Increased exhaust temperatures
- Additional stress on surrounding components
- Exhaust leakage
- Unwanted vibration or rattling
- Further damage to adjoining exhaust components
- Replacing deteriorated parts restores a secure exhaust path.
For a vehicle with serviceable factory components, the Fabspeed system should be regarded primarily as a competition performance, sound and weight-reduction upgrade.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991GT3LTRHS
The product you are viewing cross references to these numbers
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Spec Boxster Competition Race Exhaust System is a lightweight, high-flow exhaust package developed specifically for 2000-2004 Porsche 986 Boxster and Boxster S track and competition applications.
Fits:
- Porsche Boxster 986 2.7L 2000-02
- Porsche Boxster S 986 3.2L 2000-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Designed with maximum exhaust flow, weight reduction and performance in mind, the system replaces the restrictive factory exhaust and catalytic-converter arrangement with a much freer-flowing race configuration.
Fabspeed manufactures the system from 14–16 gauge CNC mandrel-bent T304 stainless steel, providing excellent resistance to exhaust heat, corrosion and repeated track-day thermal cycling.
The system also includes turn-down exhaust tips, designed to help direct sound toward the ground and assist with track noise-limit compliance.
Fabspeed currently publishes performance figures of approximately:
- +15 hp
- +14 lb-ft of torque
- 36 lb / 16.4 kg weight reduction
Actual performance will vary according to vehicle condition, engine specification, fuel and testing conditions.
What This Product Does:
The factory exhaust system must balance noise, emissions, refinement and performance.
For a dedicated competition car, these compromises can create unnecessary weight and exhaust restriction.
The Fabspeed Spec Boxster Competition system is designed to:
- Maximise exhaust gas flow
- Reduce backpressure
- Improve throttle response
- Increase horsepower and torque
- Reduce rear vehicle weight
- Produce a much more aggressive race exhaust note
- Remove the restrictive factory catalytic converters
- Provide a lightweight track-focused exhaust layout
- Direct exhaust sound downward through turn-down tips
- Replace the full OEM exhaust with a competition-oriented system
This system is specifically intended for race and track use, rather than normal road driving.
Symptoms Of Wear Or Failure:
The factory 986 exhaust system is now several decades old on early cars and can deteriorate through heat, condensation, corrosion and vibration.
Common symptoms include:
- Rust or corrosion on exhaust pipes and silencers
- Cracked welds
- Blowing or hissing noises
- Black soot around leaking joints
- Internal muffler rattles
- Loose internal baffles
- Catalyst rattling
- Reduced engine performance
- Restricted high-RPM response
- Excessive exhaust heat
- Loose clamps or brackets
- Damaged exhaust hangers
- Dented or distorted pipework
- Exhaust fumes around the rear of the vehicle
- Poor exhaust-tip alignment
- Check Engine Light caused by catalyst-related faults
Rattling or reduced performance may also be caused by heat shields, oxygen sensors or other engine-management issues, so proper diagnosis is recommended.
Why Replacement Matters:
A deteriorated exhaust system can affect both performance and reliability.
Cracked or leaking exhaust components can allow extremely hot gases to escape near surrounding parts.
Restricted or internally damaged catalytic converters can also increase exhaust backpressure.
Continued operation with a failing exhaust can contribute to:
- Reduced engine performance
- Poor throttle response
- Excessive exhaust heat
- Unwanted noise and rattling
- Exhaust fumes escaping before the intended outlet
- Heat exposure to nearby components
- Additional stress on exhaust mounts and joints
Replacing damaged components restores secure exhaust routing and correct exhaust flow.
For a healthy standard car, the Fabspeed Competition system is primarily a race-performance and weight-reduction upgrade.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9862SPEC
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Spec Boxster Competition Race Exhaust System is a lightweight, high-flow exhaust package developed specifically for 1997–1999 Porsche 986 Boxster and Boxster S track and competition applications.
Fits:
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999
- Porsche Boxster S 986 3.2L 1999
Designed with maximum exhaust flow, weight reduction and performance in mind, the system replaces the restrictive factory exhaust and catalytic-converter arrangement with a much freer-flowing race configuration.
Fabspeed manufactures the system from 14–16 gauge CNC mandrel-bent T304 stainless steel, providing excellent resistance to exhaust heat, corrosion and repeated track-day thermal cycling.
The system also includes turn-down exhaust tips, designed to help direct sound toward the ground and assist with track noise-limit compliance.
Fabspeed currently publishes performance figures of approximately:
- +15 hp
- +14 lb-ft of torque
- 36 lb / 16.4 kg weight reduction
Actual performance will vary according to vehicle condition, engine specification, fuel and testing conditions.
What This Product Does:
The factory exhaust system must balance noise, emissions, refinement and performance.
For a dedicated competition car, these compromises can create unnecessary weight and exhaust restriction.
The Fabspeed Spec Boxster Competition system is designed to:
- Maximise exhaust gas flow
- Reduce backpressure
- Improve throttle response
- Increase horsepower and torque
- Reduce rear vehicle weight
- Produce a much more aggressive race exhaust note
- Remove the restrictive factory catalytic converters
- Provide a lightweight track-focused exhaust layout
- Direct exhaust sound downward through turn-down tips
- Replace the full OEM exhaust with a competition-oriented system
This system is specifically intended for race and track use, rather than normal road driving.
Symptoms Of Wear Or Failure:
The factory 986 exhaust system is now several decades old on early cars and can deteriorate through heat, condensation, corrosion and vibration.
Common symptoms include:
- Rust or corrosion on exhaust pipes and silencers
- Cracked welds
- Blowing or hissing noises
- Black soot around leaking joints
- Internal muffler rattles
- Loose internal baffles
- Catalyst rattling
- Reduced engine performance
- Restricted high-RPM response
- Excessive exhaust heat
- Loose clamps or brackets
- Damaged exhaust hangers
- Dented or distorted pipework
- Exhaust fumes around the rear of the vehicle
- Poor exhaust-tip alignment
- Check Engine Light caused by catalyst-related faults
Rattling or reduced performance may also be caused by heat shields, oxygen sensors or other engine-management issues, so proper diagnosis is recommended.
Why Replacement Matters:
A deteriorated exhaust system can affect both performance and reliability.
Cracked or leaking exhaust components can allow extremely hot gases to escape near surrounding parts.
Restricted or internally damaged catalytic converters can also increase exhaust backpressure.
Continued operation with a failing exhaust can contribute to:
- Reduced engine performance
- Poor throttle response
- Excessive exhaust heat
- Unwanted noise and rattling
- Exhaust fumes escaping before the intended outlet
- Heat exposure to nearby components
- Additional stress on exhaust mounts and joints
Replacing damaged components restores secure exhaust routing and correct exhaust flow.
For a healthy standard car, the Fabspeed Competition system is primarily a race-performance and weight-reduction upgrade.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9861SPEC
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Deluxe Quad Style Tips are a premium exhaust-finishing upgrade designed for 2011–2014 Porsche 958 Cayenne V6 models equipped with factory Porsche Sport Exhaust (PSE).
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2011-14
They replace the smaller original exhaust tips with a larger, more aggressive quad-outlet appearance while retaining compatibility with the factory PSE muffler system.
Manufactured from high-quality 14–16 gauge T304 stainless steel, the tips are designed to withstand exhaust heat, moisture, road contamination and repeated thermal cycling.
Current finish options include:
- Polished Stainless Steel
- Carbon Fiber
- Satin Black
The upgrade is primarily designed to improve the appearance of the rear of the Cayenne rather than significantly change engine performance.
What This Product Does:
Exhaust tips form the visible final outlet of the exhaust system.
Their main functions are to direct exhaust gases away from the rear of the vehicle and provide a finished appearance where the exhaust exits the bumper.
The Fabspeed Deluxe Quad Tips are designed to:
- Replace the smaller factory PSE exhaust tips
- Create a more aggressive quad-outlet appearance
- Improve rear-end styling
- Maintain compatibility with the Porsche Sport Exhaust system
- Replace scratched, corroded or damaged original tips
- Provide durable stainless-steel construction
- Offer a choice of premium finishes
- Upgrade the appearance without replacing the full exhaust system
These tips do not replace the factory mufflers or catalytic converters and should therefore be considered mainly a styling and exhaust-finishing upgrade.
Symptoms Of Wear Or Failure:
Factory exhaust tips are exposed continuously to high exhaust temperatures, condensation, soot, road salt and debris.
Common signs of deterioration include:
- Heavy staining
- Surface corrosion
- Pitting
- Permanent heat discoloration
- Scratches or scuffs
- Dents from impact
- Excessive soot build-up
- Loose mounting hardware
- Exhaust tip movement
- Rattling while driving
- Poor alignment within the bumper
- Uneven left-to-right positioning
- Cracked mounting points
- Damaged welds
- Tip contact with surrounding bumper trim
- Peeling or deterioration of surface coatings
Some soot accumulation and heat discoloration are normal and do not necessarily mean that replacement is required.
Why Replacement Matters:
Where the original tips are only scratched or faded, replacement is mainly cosmetic.
However, damaged or loose exhaust tips can cause additional problems.
A poorly secured tip can:
- Rattle during driving
- Move excessively with exhaust vibration
- Contact the bumper
- Damage surrounding trim
- Cause heat marks
- Become increasingly misaligned
- Eventually loosen from its mounting
Replacing worn or damaged tips helps restore proper alignment and secure exhaust outlet positioning.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR958V6QDT
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Deluxe Quad Tips are a premium exhaust-finishing and styling upgrade designed for 2017–2019 Porsche 991.2 Carrera 3.0L twin-turbo base models equipped with the standard exhaust system.
Fits:
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2017-19
Designed to replace the smaller factory quad or standard oval outlets, these tips give the rear of the 991.2 Carrera a wider, more aggressive performance appearance without requiring replacement of the complete exhaust system.
Manufactured from T304 stainless steel, the tips are designed to withstand exhaust heat, moisture, road contamination and repeated thermal cycling.
The kit also includes adjustable mounting adapters that allow the installer to fine-tune:
- Tip angle
- Rotation
- Outlet depth
- Overall rear alignment
This helps achieve an even, factory-style position within the rear bumper openings.
What This Product Does:
Exhaust tips form the visible final outlet of the exhaust system.
Their primary role is to direct exhaust gases away from the vehicle while providing a finished appearance at the rear bumper.
The Fabspeed Deluxe Quad Tips are designed to:
- Replace smaller factory exhaust outlets
- Create a more aggressive quad-tip appearance
- Improve the visual presence of the rear exhaust
- Replace scratched, damaged or corroded original tips
- Maintain secure exhaust outlet positioning
- Allow adjustment of angle, rotation and depth
- Provide durable stainless-steel construction
- Upgrade the rear styling without replacing the complete exhaust
These tips are primarily an appearance and finishing upgrade rather than a significant engine-performance modification.
Symptoms Of Wear Or Failure:
Factory exhaust tips are continuously exposed to exhaust heat, condensation, soot and road debris.
Common signs that the original tips may require replacement include:
- Heavy staining
- Permanent discoloration
- Surface corrosion
- Pitting
- Scratches or scuffs
- Dents from impact
- Damaged outlet edges
- Loose mounting hardware
- Tip movement when touched
- Rattling while driving
- Poor alignment within the bumper
- Uneven outlet depth
- Excessive soot accumulation
- Cracked welds
- Damaged mounting brackets
- Tip contact with surrounding bumper trim
Some soot and heat discoloration are normal and do not necessarily indicate structural failure.
Why Replacement Matters:
Where the original exhaust tips are simply faded or scratched, replacement is mainly cosmetic.
However, physically loose or damaged tips can create additional problems.
A poorly secured exhaust tip can:
- Rattle while driving
- Move excessively with exhaust vibration
- Contact the rear bumper
- Cause heat marks on surrounding trim
- Scratch or damage the bumper opening
- Become increasingly misaligned
- Eventually loosen from its mounting
Replacing damaged tips and securing them correctly restores proper exhaust outlet positioning and helps protect surrounding bodywork.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912QDTC
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Fabspeed Deluxe Dual Style Tips, Titanium (For PSE).
The Fabspeed Deluxe Dual Style Exhaust Tips are a premium styling upgrade designed for 2017–2019 Porsche 991.2 Carrera models equipped with Porsche Sport Exhaust (PSE).
Fits:
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2017-19
Designed to replace the smaller factory exhaust outlets, these larger 4-inch tips give the rear of the 991.2 Carrera a wider, more aggressive and performance-focused appearance while retaining compatibility with the factory PSE exhaust arrangement.
Constructed from genuine carbon fibre and stainless steel depending on the selected finish, the tips are designed to withstand exhaust heat, moisture and everyday road use while providing a premium visual upgrade.
What This Product Does:
Exhaust tips form the final visible outlet of the exhaust system.
Their primary functions are to direct exhaust gases away from the vehicle and provide a finished appearance where the exhaust exits the rear bumper.
The Fabspeed Deluxe Dual Style Tips are designed to:
- Replace the smaller factory PSE exhaust tips
- Provide larger 4-inch outlets
- Give the Carrera a more aggressive rear appearance
- Maintain compatibility with Porsche Sport Exhaust
- Restore appearance where original tips are scratched or damaged
- Maintain correct exhaust outlet positioning
- Offer a straightforward bolt-on styling upgrade
These tips are primarily an appearance upgrade and should not be considered a major engine-performance modification.
Symptoms Of Wear Or Failure:
Factory exhaust tips are continuously exposed to heat, exhaust deposits, condensation, road contamination and impact from debris.
Common signs of deterioration include:
- Heavy surface staining
- Permanent discoloration
- Pitting or corrosion
- Scratches and cosmetic damage
- Dents from impact
- Excessive soot build-up
- Loose mounting hardware
- Tip movement when touched
- Rattling while driving
- Poor alignment within the bumper opening
- Uneven left-to-right positioning
- Cracks around mounting points
- Damage to welded joints
- Contact with surrounding bumper trim
- Peeling or deterioration of surface finishes
Some discoloration and soot accumulation are normal on exhaust outlets and do not necessarily indicate failure.
Why Replacement Matters:
In many cases, exhaust-tip replacement is primarily cosmetic.
Damaged, faded or heavily scratched tips can significantly affect the appearance of the rear of the vehicle, particularly on a performance model where the exhaust outlets are prominent styling features.
Replacement becomes more important if the tip or mounting arrangement is physically damaged.
- A loose or misaligned exhaust tip can:
- Produce rattling noises
- Vibrate against surrounding components
- Contact the bumper or rear trim
- Cause heat marks or abrasion
- Move further out of position over time
- Potentially loosen from its mounting
Replacing damaged tips helps restore correct alignment and secure mounting while refreshing the vehicle's appearance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912PSEDLTTI
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Fabspeed Deluxe Dual Style Tips, Satin Black (For PSE).
The Fabspeed Deluxe Dual Style Exhaust Tips are a premium styling upgrade designed for 2017–2019 Porsche 991.2 Carrera models equipped with Porsche Sport Exhaust (PSE).
Fits:
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2017-19
Designed to replace the smaller factory exhaust outlets, these larger 4-inch tips give the rear of the 991.2 Carrera a wider, more aggressive and performance-focused appearance while retaining compatibility with the factory PSE exhaust arrangement.
Constructed from genuine carbon fibre and stainless steel depending on the selected finish, the tips are designed to withstand exhaust heat, moisture and everyday road use while providing a premium visual upgrade.
What This Product Does:
Exhaust tips form the final visible outlet of the exhaust system.
Their primary functions are to direct exhaust gases away from the vehicle and provide a finished appearance where the exhaust exits the rear bumper.
The Fabspeed Deluxe Dual Style Tips are designed to:
- Replace the smaller factory PSE exhaust tips
- Provide larger 4-inch outlets
- Give the Carrera a more aggressive rear appearance
- Maintain compatibility with Porsche Sport Exhaust
- Restore appearance where original tips are scratched or damaged
- Maintain correct exhaust outlet positioning
- Offer a straightforward bolt-on styling upgrade
These tips are primarily an appearance upgrade and should not be considered a major engine-performance modification.
Symptoms Of Wear Or Failure:
Factory exhaust tips are continuously exposed to heat, exhaust deposits, condensation, road contamination and impact from debris.
Common signs of deterioration include:
- Heavy surface staining
- Permanent discoloration
- Pitting or corrosion
- Scratches and cosmetic damage
- Dents from impact
- Excessive soot build-up
- Loose mounting hardware
- Tip movement when touched
- Rattling while driving
- Poor alignment within the bumper opening
- Uneven left-to-right positioning
- Cracks around mounting points
- Damage to welded joints
- Contact with surrounding bumper trim
- Peeling or deterioration of surface finishes
Some discoloration and soot accumulation are normal on exhaust outlets and do not necessarily indicate failure.
Why Replacement Matters:
In many cases, exhaust-tip replacement is primarily cosmetic.
Damaged, faded or heavily scratched tips can significantly affect the appearance of the rear of the vehicle, particularly on a performance model where the exhaust outlets are prominent styling features.
Replacement becomes more important if the tip or mounting arrangement is physically damaged.
- A loose or misaligned exhaust tip can:
- Produce rattling noises
- Vibrate against surrounding components
- Contact the bumper or rear trim
- Cause heat marks or abrasion
- Move further out of position over time
- Potentially loosen from its mounting
Replacing damaged tips helps restore correct alignment and secure mounting while refreshing the vehicle's appearance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912PSEDLTB
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Deluxe Dual Style Exhaust Tips are a premium styling upgrade designed for 2017–2019 Porsche 991.2 Carrera models equipped with Porsche Sport Exhaust (PSE).
Fits:
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2017-19
Designed to replace the smaller factory exhaust outlets, these larger 4-inch tips give the rear of the 991.2 Carrera a wider, more aggressive and performance-focused appearance while retaining compatibility with the factory PSE exhaust arrangement.
Constructed from genuine carbon fibre and stainless steel depending on the selected finish, the tips are designed to withstand exhaust heat, moisture and everyday road use while providing a premium visual upgrade.
What This Product Does:
Exhaust tips form the final visible outlet of the exhaust system.
Their primary functions are to direct exhaust gases away from the vehicle and provide a finished appearance where the exhaust exits the rear bumper.
The Fabspeed Deluxe Dual Style Tips are designed to:
- Replace the smaller factory PSE exhaust tips
- Provide larger 4-inch outlets
- Give the Carrera a more aggressive rear appearance
- Maintain compatibility with Porsche Sport Exhaust
- Restore appearance where original tips are scratched or damaged
- Maintain correct exhaust outlet positioning
- Offer a straightforward bolt-on styling upgrade
These tips are primarily an appearance upgrade and should not be considered a major engine-performance modification.
Symptoms Of Wear Or Failure:
Factory exhaust tips are continuously exposed to heat, exhaust deposits, condensation, road contamination and impact from debris.
Common signs of deterioration include:
- Heavy surface staining
- Permanent discoloration
- Pitting or corrosion
- Scratches and cosmetic damage
- Dents from impact
- Excessive soot build-up
- Loose mounting hardware
- Tip movement when touched
- Rattling while driving
- Poor alignment within the bumper opening
- Uneven left-to-right positioning
- Cracks around mounting points
- Damage to welded joints
- Contact with surrounding bumper trim
- Peeling or deterioration of surface finishes
Some discoloration and soot accumulation are normal on exhaust outlets and do not necessarily indicate failure.
Why Replacement Matters:
In many cases, exhaust-tip replacement is primarily cosmetic.
Damaged, faded or heavily scratched tips can significantly affect the appearance of the rear of the vehicle, particularly on a performance model where the exhaust outlets are prominent styling features.
Replacement becomes more important if the tip or mounting arrangement is physically damaged.
- A loose or misaligned exhaust tip can:
- Produce rattling noises
- Vibrate against surrounding components
- Contact the bumper or rear trim
- Cause heat marks or abrasion
- Move further out of position over time
- Potentially loosen from its mounting
Replacing damaged tips helps restore correct alignment and secure mounting while refreshing the vehicle's appearance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912PSEDLTBR
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Deluxe Dual Style Exhaust Tips are a premium styling upgrade designed for 2017–2019 Porsche 991.2 Carrera models equipped with Porsche Sport Exhaust (PSE).
Fits:
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2017-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2017-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2017-19
Designed to replace the smaller factory exhaust outlets, these larger 4-inch tips give the rear of the 991.2 Carrera a wider, more aggressive and performance-focused appearance while retaining compatibility with the factory PSE exhaust arrangement.
Constructed from genuine carbon fibre and stainless steel depending on the selected finish, the tips are designed to withstand exhaust heat, moisture and everyday road use while providing a premium visual upgrade.
What This Product Does:
Exhaust tips form the final visible outlet of the exhaust system.
Their primary functions are to direct exhaust gases away from the vehicle and provide a finished appearance where the exhaust exits the rear bumper.
The Fabspeed Deluxe Dual Style Tips are designed to:
- Replace the smaller factory PSE exhaust tips
- Provide larger 4-inch outlets
- Give the Carrera a more aggressive rear appearance
- Maintain compatibility with Porsche Sport Exhaust
- Restore appearance where original tips are scratched or damaged
- Maintain correct exhaust outlet positioning
- Offer a straightforward bolt-on styling upgrade
These tips are primarily an appearance upgrade and should not be considered a major engine-performance modification.
Symptoms Of Wear Or Failure:
Factory exhaust tips are continuously exposed to heat, exhaust deposits, condensation, road contamination and impact from debris.
Common signs of deterioration include:
- Heavy surface staining
- Permanent discoloration
- Pitting or corrosion
- Scratches and cosmetic damage
- Dents from impact
- Excessive soot build-up
- Loose mounting hardware
- Tip movement when touched
- Rattling while driving
- Poor alignment within the bumper opening
- Uneven left-to-right positioning
- Cracks around mounting points
- Damage to welded joints
- Contact with surrounding bumper trim
- Peeling or deterioration of surface finishes
Some discoloration and soot accumulation are normal on exhaust outlets and do not necessarily indicate failure.
Why Replacement Matters:
In many cases, exhaust-tip replacement is primarily cosmetic.
Damaged, faded or heavily scratched tips can significantly affect the appearance of the rear of the vehicle, particularly on a performance model where the exhaust outlets are prominent styling features.
Replacement becomes more important if the tip or mounting arrangement is physically damaged.
- A loose or misaligned exhaust tip can:
- Produce rattling noises
- Vibrate against surrounding components
- Contact the bumper or rear trim
- Cause heat marks or abrasion
- Move further out of position over time
- Potentially loosen from its mounting
Replacing damaged tips helps restore correct alignment and secure mounting while refreshing the vehicle's appearance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912PSEDLTP
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Fabspeed RACE Standard Exhaust Performance Package, WITH Performance Software, Polished Stainless Steel Tips.
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991RVPKGPE
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
The Fabspeed XperTune Performance Software is an ECU calibration upgrade designed for the 2012–2016 Porsche 991 Carrera 3.4L and Carrera S 3.8L.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Rather than replacing a mechanical component, XperTune modifies the calibration within the vehicle's engine control unit to optimise parameters such as fueling, ignition strategy, throttle response and other engine-management functions.
The software is supplied with a handheld OBD-II tuning device, allowing the factory ECU file to be read from the vehicle and the Fabspeed performance calibration to be installed without physically removing the ECU.
Fabspeed develops the tune using the vehicle's original ECU data together with information about its specification and modifications, allowing the calibration to be tailored to the individual car.
What This Product Does:
The engine control unit determines how the engine responds to numerous operating conditions and sensor inputs.
The XperTune software changes selected ECU calibration parameters to improve engine performance and driving characteristics.
Its main benefits include:
- Increasing engine horsepower
- Increasing torque output
- Improving throttle response
- Optimising fueling
- Optimising ignition-related calibration
- Improving engine response throughout the RPM range
- Matching the ECU calibration to compatible performance modifications
- Allowing the vehicle to be returned to the original factory calibration
- Providing OBD-II-based installation without ECU removal
This is primarily a performance upgrade, rather than a replacement for a worn mechanical part.
How The XperTune Process Works:
The included handheld tuner allows the ECU calibration process to be completed through the vehicle's OBD-II diagnostic port.
The basic process involves:
- Reading the vehicle's original ECU data using the handheld tuner
- Connecting the handheld device to a Windows PC
- Sending the original ECU information and vehicle specification to Fabspeed
- Receiving a custom calibration matched to the vehicle
- Loading the calibration onto the handheld device
- Flashing the new tune into the vehicle through the OBD-II port
The original factory calibration can also be restored later using the same handheld device.
Benefits And Performance Modifications:
ECU tuning can be particularly useful when the vehicle has been fitted with compatible performance components such as:
- Sport headers
- High-flow catalytic converters
- Performance exhaust systems
- Intake upgrades
- Performance air filters
Mechanical airflow improvements can change the way the engine breathes.
A correctly developed ECU calibration can help the engine management system take better advantage of these changes and provide more consistent overall performance.
Why Upgrading Matters:
A healthy factory ECU calibration does not require replacement simply because of age.
The reason for installing XperTune is primarily to improve performance and optimise the engine for compatible modifications.
Potential benefits include:
- Stronger acceleration
- Increased horsepower
- Increased torque
- Sharper throttle response
- Better use of intake and exhaust upgrades
- More responsive engine behaviour
The degree of improvement depends on the vehicle specification and installed hardware.
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Supercup Exhaust System is a performance rear exhaust upgrade designed for the 2015–2018 Porsche 958.2 Cayenne non-turbo V6.
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2015-18
Developed to give the naturally aspirated V6 Cayenne a deeper, more distinctive performance exhaust note, the system replaces the restrictive factory rear exhaust section with a freer-flowing stainless-steel design.
The system also includes Fabspeed Deluxe Quad Style Exhaust Tips, giving the rear of the Cayenne a more aggressive and performance-focused appearance.
Manufactured from 14–16 gauge CNC mandrel-bent T304L stainless steel, the Supercup system is designed to improve exhaust flow while providing excellent resistance to corrosion, heat and repeated thermal cycling.
What This Product Does:
The factory rear exhaust system controls exhaust noise and routes combustion gases safely away from the vehicle, but its silencers and internal chambers also create a degree of exhaust restriction.
The Fabspeed Supercup system replaces the factory rear section with a freer-flowing arrangement designed to improve exhaust sound, reduce weight and decrease restriction.
Its main benefits include:
- Improving exhaust gas flow
- Reducing rear exhaust restriction
- Producing a deeper and throatier V6 exhaust note
- Increasing exhaust volume throughout the RPM range
- Reducing exhaust-system weight
- Improving the visual appearance of the rear of the Cayenne
- Providing durable stainless-steel construction
- Replacing ageing or damaged factory rear exhaust components
Fabspeed describes the sound as noticeably sportier while still maintaining a reasonable level of cabin refinement.
Symptoms Of Wear Or Failure:
Factory exhaust components are exposed continuously to heat, moisture, road contamination, vibration and repeated expansion and contraction.
Common symptoms of deterioration can include:
- Rust or corrosion on mufflers and pipes
- Cracks around welds
- Exhaust blowing or hissing
- Black soot around leaking joints
- Internal muffler rattles
- Metallic noises from loose internal components
- Damaged exhaust hangers
- Excessive movement of the rear exhaust
- Loose clamps or connections
- Dented or damaged pipework
- Exhaust tips becoming corroded or badly discoloured
- Uneven exhaust-tip alignment
- Exhaust fumes around the rear of the vehicle
- Increased exhaust noise caused by leaks
A rattling exhaust may also be caused by heat shields, mounts or other nearby components, so the complete system should be inspected before replacement.
Why Replacement Matters:
A deteriorated rear exhaust system can create more than an unwanted noise.
Cracks, damaged joints or corroded pipework can allow extremely hot exhaust gases to escape before reaching the intended outlets.
This can contribute to:
- Unwanted exhaust noise
- Heat exposure to surrounding components
- Soot accumulation around leaking joints
- Exhaust fumes beneath or around the vehicle
- Excessive exhaust movement
- Damage to adjoining pipes or hangers
- Poor rear exhaust alignment
Replacing damaged components restores secure exhaust routing and proper clearance from nearby bodywork.
For vehicles where the original exhaust remains fully serviceable, the Fabspeed system is primarily a sound, appearance, flow and weight-reduction upgrade rather than a repair requirement.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9582V6SCUPB
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
The Fabspeed Performance Package is a comprehensive intake and exhaust upgrade designed for Porsche 991 Carrera models from 2012–2016.
Fits:
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Rather than replacing a single exhaust component, the package combines headers, centre exhaust, side mufflers, intake filters and optional / required tuning depending on configuration to improve exhaust flow, throttle response, sound and overall engine performance.
Package Includes:
- Fabspeed Sport Headers
- 200-cell HJS Sport Catalytic Converters
- Center Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- BMC F1 Replacement Air Filters
The system is designed to provide a deeper, more aggressive flat-six exhaust note while improving airflow through both the intake and exhaust systems.
What This Product Does:
The factory Porsche exhaust and intake systems are designed to balance performance, noise control, emissions and everyday refinement.
The Fabspeed package reduces restriction in several areas simultaneously.
Its main functions and benefits include:
- Improving exhaust gas flow
- Reducing restriction in the factory side and centre mufflers
- Improving flow through the exhaust headers
- Increasing intake airflow with BMC filters
- Improving throttle response
- Increasing horsepower and torque
- Producing a stronger sports-car exhaust note
- Reducing exhaust-system weight
- Allowing quieter and louder exhaust characteristics depending on valve position
- Providing a complete matched performance package rather than isolated modifications
Performance Benefits:
Fabspeed's current published dyno data shows gains throughout the RPM range.
Its test results show approximately:
+17.17 whp / +27.33 ft-lb at 3300 RPM
+23.28 whp / +29.11 ft-lb at 4200 RPM
+25.46 whp / +22.67 ft-lb at 5900 RPM
Peak gain: +15.95 whp / +26.48 ft-lb
Fabspeed also states that the package saves approximately 15 lb compared with the factory components.
Actual performance will vary according to engine specification, vehicle condition, fuel, tune and environmental conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR991VPKGP
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed