OE Match

Cabriolet hood tension rope.
Ensure flawless convertible top operation on your Porsche Boxster (986) by replacing the critical tension cable with our high quality OE Match version.

Fits:
Porsche 986 Boxster 1997-04

Diagram ref no 17.

Why Replace This Part?
Over time the tension cable in the convertible top system can stretch, fray or break. When this happens you may experience a roof that fails to latch properly, uneven movement, or loud mechanical noises. Replacing with a proper OE Match cable ensures the linkage remains tight and the roof mechanism functions as originally designed.

Key Features & Benefits:

• Specifically designed for the convertible roof mechanism of 1997-2004 Boxster models, ensuring correct length, routing and performance.
• Crafted from durable materials engineered to resist fatigue and wear typical in convertible-top linkages helps prevent roof latch failure, mis-alignment or sagging.
• Helps restore smooth, quiet roof operation and protects the linkage system from further damage ideal for maintenance or full restoration of the Boxster convertible top system.
• OE Match alternative offers excellent value without compromising fit or function compared to genuine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656119103

The product you are viewing cross references to these numbers

Pliable Shaft / Drive Cable for Cabriolet Hood – fits Left or Right Hand Side
Sold each - 2 required per car

Restore smooth, reliable operation of your Porsche convertible roof with this Pliable Shaft / Drive Cable. Manufactured to OE specifications, this precision-engineered replacement drive cable transfers power from the convertible roof drive motor to the roof transmission mechanism, ensuring both sides of the cabriolet hood operate in perfect synchronisation.

Fits:

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08

Diagram ref no. 3

The flexible drive cable is a vital component within the electric roof mechanism. Over time, repeated operation, wear and contamination can cause the original cable to wear, bind or fail, resulting in slow roof movement, uneven operation or complete loss of drive. Replacing a worn cable helps restore reliable roof operation while preventing unnecessary strain on the roof motor and transmission assemblies.

Whether you're repairing a faulty roof mechanism or carrying out preventative maintenance, this OE Match replacement provides factory-quality fitment and dependable long-term performance.

What Does the Cabriolet Hood Drive Cable Do?

The pliable drive cable transfers rotational force from the roof drive motor to the convertible roof transmission.

Its primary functions include:

• Transmits drive from the roof motor.
• Synchronises roof movement on both sides.
• Enables smooth opening and closing.
• Supports consistent roof operation.
• Maintains correct roof timing.
• Reduces stress on the roof mechanism.
• Ensures reliable electric hood operation.

A correctly functioning drive cable is essential for the safe and smooth operation of the convertible roof system.

Why Replace the Cabriolet Hood Drive Cable?

Convertible roof drive cables are subject to continual movement and mechanical loading throughout their service life.

Common reasons for replacement include:

• Worn internal cable.
• Cable breakage.
• Frayed or damaged cable ends.
• Corrosion.
• Binding within the guide tube.
• Uneven roof movement.
• Roof mechanism repair.
• Preventative maintenance during roof refurbishment.

Replacing worn drive cables helps restore smooth operation and reduces the risk of further damage to the roof mechanism.

Symptoms of a Worn or Failed Drive Cable

Common warning signs include:

• Roof stops moving during operation.
• One side of the roof moves faster than the other.
• Roof becomes misaligned.
• Clicking or grinding noises from the roof mechanism.
• Slow or jerky roof movement.
• Roof motor operates without moving the hood.
• Roof fails to open or close completely.
• Visible wear or damage to the drive cable.

Addressing these symptoms promptly can help prevent more costly repairs to the roof transmission or motor.

Benefits

• Restores smooth convertible roof operation.
• Ensures synchronised movement of the roof mechanism.
• Helps protect the roof motor and transmissions.
• Reduces the risk of roof misalignment.
• Durable construction for long service life.
• Factory-quality fitment.
• Straightforward installation.
• Excellent value OE Match replacement.

Installation Recommendations

For the best results, inspect the complete convertible roof system during installation, including:

• Roof drive motor.
• Roof transmission gearboxes.
• Opposite-side drive cable.
• Roof linkages.
• Pivot points.
• Guide tubes.
• Convertible roof microswitches.
• Roof control module operation.

Where one drive cable has failed due to wear, it is advisable to inspect—or replace—the opposite cable to maintain balanced operation and minimise future repairs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656171703

The product you are viewing cross references to these numbers

Short Shift Kit with Gearshift Lever

Transform the driving experience of your classic Porsche with this Short Shift Kit. Designed for 915 manual gearboxes, this precision-engineered upgrade reduces gear lever travel by approximately 20%, delivering faster, more precise gear changes while retaining the mechanical feel that has made the 915 transmission an icon among Porsche enthusiasts.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L

Supplied complete with a replacement gearshift lever, this OE Match kit is manufactured to OE specifications for accurate fitment and dependable operation. By shortening the distance the gear lever travels between gears, the kit creates a more direct, responsive shift action, enhancing driver confidence whether you're enjoying spirited road driving, touring or a classic track day.

Ideal for restorations, performance upgrades or replacing worn original components, this short shift kit provides a factory-style solution with a noticeably sportier driving experience.

What Does a Short Shift Kit Do?

A short shift kit changes the pivot geometry of the gear lever to reduce the distance required to engage each gear.

Its primary functions include:

• Reduces gear lever travel by approximately 20%.
• Provides quicker gear changes.
• Improves shift precision.
• Delivers a more direct shift feel.
• Reduces unnecessary hand movement between gears.
• Enhances driver engagement.
• Maintains positive gear selection.
• Complements the character of the 915 manual gearbox.

Unlike modifications that alter the gearbox itself, a short shift kit improves the feel of the gear selection mechanism while preserving the original transmission.

Why Upgrade to a Short Shift Kit?

Many classic Porsche owners choose a short shift kit to improve driving enjoyment and refresh worn gear linkage components.

Common reasons for upgrading include:

• Desire for shorter gear changes.
• Worn original gearshift mechanism.
• Excessive shift travel.
• Gear lever replacement during restoration.
• Improving driving precision.
• Refreshing transmission linkage components.
• Performance-focused road use.
• Track day preparation.

A quality short shift kit modernises the shift feel while maintaining the authentic character of the classic Porsche driving experience.

Symptoms of a Worn Gearshift Mechanism

Replacing the gearshift assembly or fitting a short shift kit can help resolve:

• Excessive gear lever movement.
• Long or vague gear changes.
• Worn gear lever pivot.
• Inconsistent gear engagement.
• Sloppy shift feel.
• Difficulty selecting gears accurately.
• Excessive wear in the original mechanism.
• Reduced driving confidence.

While a short shift kit cannot correct internal gearbox wear, it significantly improves the precision and feel of a healthy gear linkage system.

Benefits

• Faster and more precise gear changes.
• Improved driver engagement.
• Reduced shift throw by approximately 20%.
• More direct and responsive gear selection.
• Factory-quality fitment.
• Durable construction for long-term reliability.
• Enhances the driving experience without modifying the gearbox internally.
• Excellent value OE Match upgrade.

Installation Recommendations

For the best results, inspect or replace associated gearshift and transmission components during installation, including:

• Gearshift bushes.
• Shift rod bushes.
• Shift coupler bushes.
• Gearshift housing bushes.
• Gear lever boot.
• Shift coupling.
• Gear linkage hardware.
• Gearbox and engine mounts.

Correct adjustment of the shift linkage after installation is essential to achieve smooth, accurate gear selection and maximise the benefits of the short shift kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100

The product you are viewing cross references to these numbers

Rear Wiper Blade Cover 

Restore the clean, factory appearance of your Porsche's rear wiper assembly with this Rear Wiper Blade Cover. Manufactured to OE specifications, this high-quality replacement cover is designed to protect the rear wiper blade mounting while providing a neat, finished appearance that complements the vehicle's original styling.

Fits:

• Porsche 955 Cayenne 3.2L V6 2003-06
• Porsche 955 Cayenne S 4.5L V8 2003-06
• Porsche 955 Cayenne Turbo 4.5L 2003-06
• Porsche 955 Cayenne Turbo S 4.5L 2006>>
• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S / GTS 4.8L 2007-10
• Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10

for cars with Option Codes
IQL3 - tinted glass, green at rear
IQL5 - dark tinted rear privacy glass

Although small, the rear wiper blade cover plays an important role in protecting the wiper assembly from dirt, moisture and road debris. Over time, exposure to UV rays, weather conditions and repeated use can cause the original cover to become cracked, faded or detached, leaving the rear wiper looking unfinished and exposing internal components to the elements.

Whether you're replacing a damaged cover or refreshing the exterior trim during routine maintenance or restoration, this OE Match replacement offers factory-quality fitment, durable construction and an authentic appearance.

What Does the Rear Wiper Blade Cover Do?

The rear wiper blade cover serves both protective and cosmetic functions.

Its primary roles include:

• Protecting the rear wiper blade attachment.
• Shielding internal fixing components from dirt and moisture.
• Helping reduce corrosion around the mounting area.
• Providing a neat, finished appearance.
• Supporting the long-term durability of the rear wiper assembly.
• Maintaining the original exterior styling.

A correctly fitted cover helps preserve both the functionality and appearance of the rear wiper system.

Why Replace the Rear Wiper Blade Cover?

Rear wiper covers are continually exposed to harsh environmental conditions.

Common reasons for replacement include:

• UV fading.
• Cracked or brittle plastic.
• Broken retaining clips.
• Missing cover.
• Damage during wiper blade replacement.
• Weather-related deterioration.
• Impact damage.
• Exterior refurbishment.

Replacing the cover restores the original appearance while protecting the rear wiper mechanism from unnecessary exposure.

Symptoms of a Damaged Rear Wiper Blade Cover

Common signs include:

• Missing rear wiper cover.
• Cracked or broken plastic.
• Loose-fitting cover.
• Faded or discoloured finish.
• Exposed mounting hardware.
• Water or dirt collecting around the fixing.
• Untidy appearance of the rear wiper assembly.
• Broken retaining clips.

Replacing a damaged cover is a quick and effective way to refresh the appearance of the rear window area.

Benefits

• Restores the original appearance of the rear wiper assembly.
• Protects mounting components from dirt and moisture.
• Improves exterior presentation.
• Durable, weather-resistant construction.
• Straightforward installation.
• Factory-quality fitment.
• Long service life.
• Excellent value OE Match replacement.

Installation Recommendations

For the best results, inspect the complete rear wiper assembly during installation, including:

• Rear wiper blade.
• Rear wiper arm.
• Wiper spindle.
• Wiper motor operation.
• Rear screen washer jet.
• Washer hose.
• Tailgate trim around the wiper assembly.
• Rear window condition.

Replacing worn wiper blades and inspecting the washer system at the same time will help ensure reliable rear visibility in all weather conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95562812501

The product you are viewing cross references to these numbers

Headlamp with Chrome Bezel for Left Hand Drive (LHD)
Fits Left or Right Hand Side

Restore the unmistakable appearance and dependable illumination of your classic Porsche with this Headlamp with Chrome Bezel. Manufactured to OE specifications, this complete replacement headlamp combines authentic period styling with modern manufacturing quality, making it the ideal solution for restoration projects, accident repairs or replacing aged original lighting.

Fits:

• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65

Supplied complete with a beautifully finished chrome bezel, this headlamp is designed for left-hand drive vehicles and is E-marked for road use in applicable markets. It delivers excellent light output while preserving the timeless appearance that defines the Porsche 356.

Whether you're completing a concours-standard restoration or simply replacing a worn or damaged headlamp, this OE Match assembly offers factory-quality fitment, dependable performance and exceptional attention to detail.

Please note: This headlamp is not suitable for the USA market.

What Does the Headlamp Do?

The headlamp is one of the most important safety components on any vehicle, providing illumination for safe driving in low-light and adverse weather conditions while ensuring the vehicle remains visible to other road users.

Its primary functions include:

• Illuminating the road ahead.
• Providing dipped and main beam lighting.
• Improving night-time visibility.
• Enhancing safety in poor weather conditions.
• Maintaining the vehicle's original appearance.
• Completing the classic front-end styling.

A high-quality headlamp ensures optimum visibility without compromising the authentic character of a classic Porsche.

Why Replace the Headlamp?

Headlamp assemblies naturally deteriorate with age and exposure to the elements.

Common reasons for replacement include:

• Corroded reflectors.
• Tarnished or damaged chrome bezels.
• Stone chips or damaged lenses.
• Moisture ingress.
• Reduced light output.
• Accident damage.
• Poor previous repairs.
• Restoration projects.

Replacing ageing headlamp assemblies significantly improves both appearance and driving safety.

Symptoms of a Worn or Damaged Headlamp

Common warning signs include:

• Poor night-time visibility.
• Dull or uneven beam pattern.
• Corrosion inside the reflector.
• Water or condensation inside the lamp.
• Pitted or damaged lens.
• Rusted or deteriorated chrome bezel.
• Loose mounting components.
• Failed roadworthiness inspections.

Installing a new OE Match headlamp restores both lighting performance and the original appearance of the vehicle.

Benefits

• Restores original classic appearance.
• Improves night-time visibility.
• Delivers a clear, accurate beam pattern.
• Enhances driving safety.
• Premium chrome finish.
• Factory-quality fitment.
• Durable construction for long service life.
• Ideal for restorations and vehicle refurbishment.

Installation Recommendations

For the best results, inspect or renew associated lighting components during installation, including:

• Headlamp seals and gaskets.
• Bulbs. Headlamp retaining rings.
• Electrical connectors.
• Wiring harness.
• Headlamp adjustment screws.
• Front indicator assemblies.
• Front parking lights.

After installation, always ensure the headlamp beam is professionally aligned for optimum visibility and legal road use.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64463110107

The product you are viewing cross references to these numbers

Anti Roll Bar Lever Guide Plate 

Sold each - 4 required per car

Restore the integrity of your Porsche suspension system with this Anti Roll Bar Lever Guide Plate. Manufactured to OE specifications, this precision-engineered guide plate ensures the correct positioning and support of the front anti-roll bar lever assembly, helping maintain accurate suspension geometry, smooth suspension movement and predictable handling characteristics.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 914 (1970-1976)

Diagram ref no 42

Although compact in size, the guide plate performs an important role within the front suspension assembly. It supports the anti-roll bar lever mechanism, helping to keep associated components correctly aligned while allowing the anti-roll bar to function efficiently as suspension loads change during cornering, braking and uneven road conditions.

Whether you're undertaking a complete suspension rebuild, replacing worn hardware or carrying out a concours-quality restoration, this OE Match guide plate provides factory-quality fitment, durability and dependable long-term performance.

What Does the Front Anti Roll Bar Lever Guide Plate Do?

The front anti-roll bar lever guide plate helps maintain the correct positioning and operation of the anti-roll bar lever assembly.

Its primary functions include:

• Supporting the anti-roll bar lever mechanism.
• Maintaining correct component alignment.
• Assisting smooth suspension articulation.
• Helping distribute suspension loads.
• Supporting consistent anti-roll bar operation.
• Contributing to stable cornering performance.
• Maintaining suspension geometry.

A properly fitted guide plate helps ensure the anti-roll bar system operates as intended, improving vehicle stability and steering response.

Why Replace the Anti Roll Bar Lever Guide Plate?

Over time, suspension hardware can deteriorate due to continual mechanical loading and environmental exposure.

Common reasons for replacement include:

• Corrosion.
• Accident or impact damage.
• Bent or distorted components.
• Fatigue caused by years of use.
• Suspension restoration projects.
• Worn mounting points.
• Preventative maintenance during suspension rebuilds.
• Replacing missing original hardware.

Renewing suspension hardware helps maintain proper alignment and reliable operation throughout the suspension system.

Symptoms of a Worn or Damaged Guide Plate

Common signs include:

• Suspension clunks or rattles.
• Excessive movement within the anti-roll bar assembly.
• Poor suspension alignment.
• Reduced handling precision.
• Uneven suspension loading.
• Visible corrosion or distortion.
• Difficulty assembling suspension components.
• Excessive wear around mounting points.

Replacing worn guide plates restores the integrity of the anti-roll bar mounting system and helps maintain consistent suspension performance.

Benefits

• Restores correct suspension component alignment.
• Supports consistent anti-roll bar operation.
• Improves suspension stability.
• Helps reduce unwanted movement.
• Durable corrosion-resistant construction.
• Factory-quality fitment.
• Straightforward installation.
• Excellent value OE Match suspension component.

Installation Recommendations

For optimum suspension performance, inspect associated components during installation, including:

• Front anti-roll bar.
• Anti-roll bar bushes.
• Lever arms.
• Mounting brackets.
• Drop links where applicable.
• Suspension bushes.
• Wishbones.
• Fasteners and mounting hardware.

Following installation, inspect the complete front suspension assembly to ensure correct alignment, free movement and secure fastening of all anti-roll bar components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134376300

The product you are viewing cross references to these numbers

Handbrake Shoe Adjuster Screw 
Sold each - 2 required per car

Maintain safe and reliable parking brake operation with this OE Match Handbrake Shoe Adjuster Screw. Manufactured to OE specifications, this precision-engineered component allows accurate adjustment of the handbrake shoes, ensuring the correct clearance between the brake shoes and drum for consistent braking performance and dependable parking brake operation.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 356C 1963-65

Diagram Ref No. 27

The handbrake adjuster screw is a small but essential part of the parking brake assembly. It enables fine adjustment as the brake shoes wear over time, helping to maintain the correct operating position without excessive lever travel or reduced holding force. During brake servicing or restoration, replacing worn or corroded adjuster screws ensures smooth adjustment and reliable long-term operation.

Whether carrying out a complete brake overhaul or simply replacing seized or damaged hardware, this OE Match adjuster screw provides factory-quality fitment and dependable performance.

What Does the Handbrake Shoe Adjuster Screw Do?

The handbrake shoe adjuster screw allows precise adjustment of the parking brake shoes within the brake drum.

Its primary functions include:

• Setting the correct brake shoe clearance.
• Maintaining effective parking brake operation.
• Compensating for normal brake shoe wear.
• Reducing excessive handbrake lever travel.
• Supporting even brake shoe contact.
• Helping ensure consistent braking performance.
• Allowing accurate servicing and adjustment.

Correct adjustment is essential for maximum parking brake efficiency and safe vehicle operation.

Why Replace the Handbrake Shoe Adjuster Screw?

Brake adjuster screws are exposed to moisture, dirt and road salt, making them susceptible to corrosion and seizure over time.

Common reasons for replacement include:

• Corroded threads. Seized adjuster mechanism.
• Damaged or worn adjuster teeth.
• Difficulty adjusting brake shoes.
• Brake restoration work.
• Routine brake overhaul.
• Damaged adjustment slots.
• General age-related wear.

Replacing worn adjusters restores smooth adjustment and helps ensure the parking brake can be set correctly.

Symptoms of a Worn or Seized Adjuster Screw

Common warning signs include:

• Difficulty adjusting the handbrake.
• Excessive handbrake lever travel.
• Reduced parking brake holding power.
• Uneven brake shoe clearance.
• Brake drag after adjustment.
• Seized adjuster during servicing.
• Corrosion or damaged threads.
• Inconsistent handbrake performance.

Replacing seized or damaged adjusters simplifies future servicing and helps restore correct brake operation.

Benefits

• Restores accurate handbrake adjustment.
• Improves parking brake performance.
• Reduces excessive lever travel.
• Simplifies future brake servicing.
• Maintains correct brake shoe clearance.
• Long-lasting corrosion-resistant construction.
• Factory-quality fitment.
• Excellent value OE Match replacement.

Installation Recommendations

For the best results, inspect or replace related parking brake components during installation, including:

• Handbrake shoes.
• Return springs.
• Hold-down springs.
• Expander mechanism.
• Brake drums or rear brake discs with integrated drum.
• Handbrake cables.
• Backing plates.
• Brake hardware kits.

After installation, adjust both sides evenly according to the manufacturer's specifications and verify correct parking brake operation before returning the vehicle to service.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135294310

The product you are viewing cross references to these numbers

Crankcase Oil Strainer 

Protect your Porsche engine with this OE Match Crankcase Oil Strainer. Manufactured to OE specifications, this precision-engineered replacement oil strainer plays a vital role in safeguarding the lubrication system by preventing large debris from entering the oil pump while ensuring unrestricted oil flow throughout the engine.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 914-6 (1970-1976)

Diagram ref no 38

Located within the engine crankcase, the oil strainer acts as the first line of defence for the lubrication system. It filters larger contaminants before the oil reaches the pump, helping to protect critical internal engine components from premature wear and damage. A clean, undamaged oil strainer is essential for maintaining consistent oil circulation and reliable engine lubrication.

Whether you're carrying out a routine oil service, rebuilding an engine or undertaking a complete restoration, replacing a worn or damaged oil strainer is a sensible preventative maintenance measure that helps preserve long-term engine reliability.

What Does the Crankcase Oil Strainer Do?

The crankcase oil strainer performs several important functions within the engine lubrication system:

• Filters larger particles from the engine oil.
• Protects the oil pump from debris.
• Maintains unrestricted oil flow.
• Supports consistent oil pressure.
• Helps extend engine life.
• Prevents contaminants circulating through the lubrication system.
• Contributes to reliable engine performance.

Working alongside the oil filter and oil pump, the oil strainer helps ensure clean, uninterrupted lubrication reaches every critical engine component.

Why Replace the Crankcase Oil Strainer?

Over time, oil strainers can become contaminated or damaged through years of service.

Common reasons for replacement include:

• Sludge accumulation.
• Metal debris contamination.
• Damaged or distorted mesh. Corrosion.
  
• Engine rebuilds.
• Preventative maintenance.
• Oil starvation investigations.
• High-mileage servicing.

Replacing the oil strainer during engine maintenance helps ensure maximum lubrication efficiency and provides valuable insight into the condition of the engine by revealing any abnormal debris trapped within the screen.

Symptoms of a Worn or Contaminated Oil Strainer

Signs that the oil strainer should be inspected or replaced include:

• Reduced oil pressure.
• Sludge build-up inside the engine.
• Restricted oil flow.
• Oil pressure warning light.
• Metallic debris discovered during servicing.
• Engine lubrication concerns.
• Evidence of contamination during oil changes.
• Engine rebuild or restoration work.

Regular inspection of the oil strainer is considered good practice during major engine servicing.

Benefits

• Protects the oil pump from debris.
• Supports reliable oil circulation.
• Helps maintain correct oil pressure.
• Improves lubrication system reliability.
• Reduces the risk of oil starvation.
• Long-lasting construction.
• Factory-quality fitment.
• Excellent value OE Match replacement.

Installation Recommendations

When replacing the crankcase oil strainer, it is recommended to inspect or replace associated service components, including:

• Engine oil.
• Oil filter.
• Oil strainer gasket.
• Sump plate gasket.
• Drain plug sealing washer.
• Oil pump pick-up.
• Oil pressure relief valve.
• Oil lines and fittings.

Always refill the engine with the correct Porsche-approved engine oil and inspect the removed strainer for signs of excessive metal particles or debris that may indicate internal engine wear.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010731400

The product you are viewing cross references to these numbers

Gearbox Suspension Bracket.

Restore secure gearbox mounting and drivetrain stability with this OE Match Gearbox Suspension Bracket, manufactured as a direct replacement. Produced to OE-style specifications, this high-quality bracket is designed to support and secure the transmission assembly to the vehicle's mounting system, maintaining correct drivetrain alignment while helping to isolate vibration and absorb operational loads.

Fits:

• Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
• Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16

  
Diagram Ref No 3

The gearbox suspension bracket is a structural component that works in conjunction with the transmission mount to support the weight of the gearbox and resist movement during acceleration, braking, and cornering. Over time, the original bracket can suffer from corrosion, fatigue, impact damage, or mounting point wear, compromising the stability of the transmission assembly. This OE Match replacement restores the correct fit and strength, making it an ideal solution for maintenance, accident repairs, and Porsche restoration projects.  

What This Product Does:

• Supports and secures the gearbox assembly.
• Maintains correct transmission alignment.
• Provides a mounting point for the transmission support system.
• Helps reduce unwanted drivetrain movement.
• Supports smooth power transfer through the drivetrain.
• Replaces damaged or corroded original brackets.
• Provides an OE-style fit and structural integrity.

Symptoms Of Wear Or Failure:

• Excessive gearbox or drivetrain movement.
• Knocking or clunking noises during acceleration or gear changes.
• Visible cracks, corrosion, or damage to the bracket.
• Loose or damaged mounting points.
• Increased drivetrain vibration.
• Misalignment of the transmission assembly.
• Impact damage following a collision or underbody strike.
• Age-related deterioration of the original component.

Why Replacement Matters:

• The gearbox suspension bracket is a critical structural component that keeps the transmission securely mounted and correctly aligned within the vehicle. A damaged or weakened bracket can allow excessive drivetrain movement, increase vibration, place additional stress on transmission mounts, and adversely affect driving refinement.
• Replacing a worn or damaged gearbox suspension bracket restores proper transmission support, improves drivetrain stability, and helps protect surrounding components from unnecessary wear. Manufactured to OE-style specifications, this OE Match replacement provides the correct fit, strength, and long-lasting durability, making it an excellent choice for routine maintenance, repairs, and professional Porsche restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97037511801

The product you are viewing cross references to these numbers

Gear Lever Knob 5-Speed 901 Gearbox With Insert.
Restore the original appearance and tactile feel of your Porsche's interior with this OE Match Gear Lever Knob for 5-Speed 901 Gearbox, complete with insert and manufactured as a direct replacement. Produced to OE-style specifications, this high-quality gear knob is designed to provide the correct fit, finish, and shift pattern, making it ideal for maintenance, restoration, or replacing worn original components.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 914 (1970-1976)  

The gear lever knob provides the driver's primary point of contact with the transmission, ensuring comfortable and precise gear changes while displaying the correct 5-speed shift pattern. Years of regular use, exposure to sunlight, and repeated handling can cause the knob to become worn, faded, cracked, or loose. This OE Match replacement restores both the functionality and authentic appearance of your Porsche's gearshift assembly.

What This Product Does:

• Provides a comfortable and secure grip for gear changes.
• Displays the correct 5-speed 901 gearbox shift pattern.
• Restores precise and confident gear selection.
• Completes the original appearance of the interior.
• Provides an OE-style fit with integrated insert.
• Replaces worn, cracked, faded, or loose original gear knobs.
• Supports accurate and comfortable manual gear operation.

Symptoms Of Wear Or Failure:

• Cracked or damaged gear lever knob.
• Worn or faded shift pattern insert.
• Loose gear knob on the lever.
• Excessive wear from regular use.
• Poor grip during gear changes.
• Cosmetic deterioration affecting the interior.
• Missing or damaged shift pattern insert.
• Age-related deterioration of the original finish.

Why Replacement Matters:

• The gear lever knob is both a functional control and a prominent interior trim component. A worn or damaged knob can reduce driver comfort, make gear changes less positive, and detract from the originality of the vehicle's interior.
• Replacing the gear lever knob restores a secure grip, improves shifting comfort, and returns the cabin to its factory appearance. Manufactured to OE-style specifications, this OE Match replacement provides the correct fit, authentic finish, and long-lasting durability, making it an excellent choice for routine maintenance and concours-quality Porsche restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142401400

The product you are viewing cross references to these numbers

Air Conditioning Expansion Valve.
Restore the efficiency and performance of your Porsche's air conditioning system with this OE Match Air Conditioning Expansion Valve, manufactured as a direct replacement. Produced to OE-style specifications, this precision-engineered valve regulates the flow of refrigerant into the evaporator, ensuring optimum cooling performance and protecting the air conditioning system from incorrect refrigerant delivery.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87  

Diagram Ref No 20

The expansion valve is a critical component within the air conditioning system, controlling refrigerant pressure and volume as it enters the evaporator. Over time, contamination, internal wear, corrosion, or blockage can cause the valve to malfunction, resulting in poor cooling performance, fluctuating vent temperatures, or increased strain on the compressor. This OE Match replacement restores correct refrigerant flow and helps return the air conditioning system to reliable, efficient operation.  

What This Product Does:

• Regulates refrigerant flow into the evaporator.
• Controls refrigerant pressure for efficient cooling.
• Maintains consistent air conditioning performance.
• Helps prevent evaporator freezing.
• Protects the air conditioning compressor from excessive system load.
• Restores OE-style refrigerant control.
• Replaces worn, blocked, or faulty original expansion valves.

Symptoms Of Wear Or Failure:

• Weak or insufficient air conditioning cooling.
• Fluctuating vent temperatures.
• Air conditioning system freezing or icing.
• Compressor cycling excessively.
• Poor refrigerant flow through the system.
• Reduced air conditioning efficiency.
• Internal blockage caused by contamination.
• Refrigerant leaks around the valve.
• Increased compressor load or unusual operating behaviour.

Why Replacement Matters:

• The air conditioning expansion valve is essential for maintaining the correct refrigerant flow and pressure throughout the air conditioning system. A faulty or restricted valve can significantly reduce cooling performance, increase compressor wear, and lead to inefficient system operation.
• Replacing a worn expansion valve restores efficient refrigerant control, improves cooling performance, and helps protect expensive air conditioning components from premature failure. Manufactured to OE-style specifications, this OE Match replacement provides the correct fit, dependable operation, and long-lasting durability, making it an essential component for maintaining your Porsche's climate control system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157391500

The product you are viewing cross references to these numbers

Front radiator intercooler
This OE Match intercooler is a direct replacement for Porsche part, manufactured to original specifications, it ensures precise fitment and reliable performance within the turbocharged intake system. Installed at the front of the vehicle, the intercooler cools compressed air from the turbochargers before it enters the engine. By reducing intake air temperature, it improves combustion efficiency and supports optimal engine performance.

Fits:
Porsche 957 Cayenne Turbo 4.8L 2007 - 2010
Porsche 958 Cayenne Turbo 4.8L 2011 - 2018

Diagram ref no 1 (left) and 2 (right)

The intercooler lowers the temperature of compressed air from the turbochargers, increasing air density and improving engine efficiency. This results in better power output, improved throttle response, and enhanced reliability.

A properly functioning intercooler is essential for maintaining consistent turbo performance and preventing heat-related power loss.

Function
•  Cools compressed intake air from turbochargers
•  Improves combustion efficiency and engine performance
•  Maintains stable intake air temperatures
•  Supports consistent boost pressure and power delivery

This component is critical for performance and engine protection in turbocharged vehicles.

Over time, intercoolers can become clogged, corroded, or develop internal leaks, reducing their cooling efficiency. This can lead to higher intake temperatures, reduced performance, and increased engine stress.

Replacing a worn intercooler restores proper cooling, improves engine efficiency, and ensures reliable turbocharged performance.

When to replace:
•   Loss of power or reduced turbo efficiency
•   Boost leaks or hissing noises
•   Oil contamination inside intercooler
•   Visible external damage or corrosion
•   Fault codes related to intake temperature or boost pressure

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9551106

The product you are viewing cross references to these numbers

Air conditioning blower regulator.
OE Match quality heating, ventilation & air conditioning (HVAC) blower motor resistor/regulator designed to replicate the performance and fit of the original Porsche part. It controls the speed of the blower motor in the vehicle’s climate control system, helping regulate cabin airflow and comfort.

Fits:
For cars with Air Conditioner (option code: 573)
Porsche 981 Boxster 2012 - 2016 
Porsche 981SP Boxster Spyder 2016
Porsche 982 (718) Boxster 2017 >>
Porsche 982SP (718) Boxster Spyder 2019>>

Porsche 981C Cayman 2014 - 2016
Porsche 981C Cayman GT4 2016
Porsche 982C (718C) Cayman 2017>>
Porsche 982C (718C) Cayman GT4 2019>>

Porsche 991.1 Carrera 2012 - 2016
Porsche 991.2 Carrera 2017 - 2019
Porsche 991 Turbo 2014- 2020
Porsche 991 R / GT3 / RS / GT-Speed 2014 -2021

Diagram ref no 16.

This OE Match blower motor resistor (also known as a blower control unit or HVAC blower regulator) is engineered to meet or match the original Porsche specifications for reliable airflow regulation in the vehicle’s HVAC system. It’s an ideal replacement when the original unit fails or when restoring climate control performance.

The blower motor resistor enables variable control of the HVAC blower motor speed, typically by adjusting resistance in the circuit that powers the blower. When functioning correctly, it lets your HVAC system modulate airflow through the vents across multiple fan speeds - from gentle circulation to full fan power. Without a working resistor, the blower may only operate at one speed (usually high), or not at all.

A failing blower motor resistor can cause inconsistent HVAC fan performance, reduced airflow, inability to adjust fan speed, or complete blower failure - diminishing cabin comfort and making climate control unpredictable. Replacing it with an OE Match quality unit restores proper fan speed control and helps maintain reliable interior climate performance without the cost of a full OEM part.

Replace this part if you observe any of the following symptoms:
•  HVAC blower only works at one fan speed (e.g., full speed)
•  Inconsistent or weak airflow from vents
•  No blower function at certain fan settings
•  Intermittent or failed blower operation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99162442301

The product you are viewing cross references to these numbers

Air con expansion valve.
OE Match expansion valve is a replacement for the original Porsche part, designed for Porsche 928, 964 and 993 models. It regulates the flow of refrigerant into the evaporator, ensuring the correct pressure balance for efficient cooling and reliable performance.

Fits:
Porsche 928 1982-95 M570 / M573
Porsche 964 1989-94 M573
Porsche 993 1995-98 M573

* M570 - Cars with air conditioner with improved efficiency
* M573 - Cars with standard air conditioner

Diagram ref no 35

What this product does:
• Controls refrigerant flow between condenser and evaporator
• Maintains stable pressure for consistent cabin cooling
• Prevents evaporator freeze-up and reduces compressor strain

Location: Installed in the A/C system, between the condenser and evaporator

A worn or clogged expansion valve can cause weak cooling, fluctuating cabin temperatures, or excess strain on the compressor. Replacing expansion valve restores proper cooling efficiency, protects the A/C system, and ensures long-lasting comfort in your Porsche.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92857312305

The product you are viewing cross references to these numbers

Front Wiper Arm, BLACK, Left Hand Drive Cars Only.
Restore reliable windscreen wiping performance and the original appearance of your Porsche with this OE Match Front Wiper Arm, Right Side Only, Black, manufactured as a direct replacement. Produced to OE-style specifications, this replacement wiper arm provides the correct fit, spring tension, and black finish to ensure consistent contact between the wiper blade and windscreen.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

The wiper arm is responsible for maintaining even pressure across the wiper blade, allowing effective removal of rain, dirt, and road spray for maximum visibility in adverse weather conditions. Over time, the arm can become bent, corroded, weakened, or suffer from worn mounting splines, resulting in poor wiping performance and reduced driver visibility. This OE Match replacement restores smooth, dependable operation while preserving the factory appearance of your Porsche.  

What This Product Does:

• Supports and positions the right-hand wiper blade.
• Maintains correct spring pressure against the windscreen.
• Ensures smooth and efficient wiping performance.
• Improves visibility in wet weather conditions.
• Provides an OE-style fit and black finish.
• Replaces worn, bent, or corroded original wiper arms.
• Restores the original appearance of the windscreen wiper system.

Symptoms Of Wear Or Failure:

• Poor or uneven wiping performance.
• Wiper blade lifting from the windscreen.
• Bent or damaged wiper arm.
• Corrosion affecting the arm or mounting.
• Worn mounting splines causing slipping.
• Excessive vibration or chatter during operation.
• Uneven pressure across the wiper blade.
• Cosmetic deterioration of the black finish.

Why Replacement Matters:

• The front wiper arm plays a critical role in maintaining clear visibility by keeping consistent pressure on the wiper blade throughout its sweep. A worn or damaged arm can significantly reduce wiping efficiency, impair visibility in poor weather, and place additional strain on the wiper mechanism.
• Replacing a worn wiper arm restores smooth operation, improves driving safety, and preserves the original appearance of your Porsche. Manufactured to OE-style specifications, this OE Match replacement offers the correct fit, spring tension, and durable black finish, making it an ideal choice for routine maintenance and concours-quality restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91162801

The product you are viewing cross references to these numbers

Front Wiper Arm, Right Side Only, BLACK.
Restore reliable windscreen wiping performance and the original appearance of your Porsche with this OE Match Front Wiper Arm, Right Side Only, Black, manufactured as a direct replacement. Produced to OE-style specifications, this replacement wiper arm provides the correct fit, spring tension, and black finish to ensure consistent contact between the wiper blade and windscreen.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

The wiper arm is responsible for maintaining even pressure across the wiper blade, allowing effective removal of rain, dirt, and road spray for maximum visibility in adverse weather conditions. Over time, the arm can become bent, corroded, weakened, or suffer from worn mounting splines, resulting in poor wiping performance and reduced driver visibility. This OE Match replacement restores smooth, dependable operation while preserving the factory appearance of your Porsche.  

What This Product Does:

• Supports and positions the right-hand wiper blade.
• Maintains correct spring pressure against the windscreen.
• Ensures smooth and efficient wiping performance.
• Improves visibility in wet weather conditions.
• Provides an OE-style fit and black finish.
• Replaces worn, bent, or corroded original wiper arms.
• Restores the original appearance of the windscreen wiper system.

Symptoms Of Wear Or Failure:

• Poor or uneven wiping performance.
• Wiper blade lifting from the windscreen.
• Bent or damaged wiper arm.
• Corrosion affecting the arm or mounting.
• Worn mounting splines causing slipping.
• Excessive vibration or chatter during operation.
• Uneven pressure across the wiper blade.
• Cosmetic deterioration of the black finish.

Why Replacement Matters:

• The front wiper arm plays a critical role in maintaining clear visibility by keeping consistent pressure on the wiper blade throughout its sweep. A worn or damaged arm can significantly reduce wiping efficiency, impair visibility in poor weather, and place additional strain on the wiper mechanism.
• Replacing a worn wiper arm restores smooth operation, improves driving safety, and preserves the original appearance of your Porsche. Manufactured to OE-style specifications, this OE Match replacement offers the correct fit, spring tension, and durable black finish, making it an ideal choice for routine maintenance and concours-quality restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162801500

The product you are viewing cross references to these numbers