do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a specialist replacement-parts brand developed around Porsche applications, covering routine maintenance, mechanical repairs, restoration and difficult-to-source components for classic and modern models. Design911 selects brands for quality and Porsche fitment, with knowledgeable specialists available to help owners and workshops choose suitable parts.
The OE Match story
OE Match is focused on preserving Porsche vehicles by returning hard-to-find and no-longer-available components to the market. Its purpose is to keep Porsche vehicles maintained, repaired, restored and usable for the future, particularly where original components have become expensive, difficult to source or discontinued.
Supplied catalogue information records over 8000 individual part numbers, more than 11,800 OE cross-references and over 100 new products in engineering, while the wider product programme contains more than 9,000 variants; these figures describe different measures of the range. Continuing development involves researching the parts owners and workshops genuinely need, working with specialist manufacturers, reviewing engineering specifications, assessing samples, testing and approving components before release. From small seals, clips and brackets to major mechanical components, the aim is to prevent a difficult-to-source item from holding up an entire repair or restoration: preserving Porsche, one part at a time.
Why choose OE Match for your Porsche
OE Match is a quality aftermarket and OE-equivalent replacement option developed specifically around Porsche applications rather than adapted from a general aftermarket range. Original references, vehicle fitment information, dimensions, materials and component specifications are used to identify suitable replacements for routine service, age-related wear, larger mechanical repairs and restoration work.
Its research, development and quality-control processes assess material and manufacturing quality, dimensions and specification, OE-reference compatibility, vehicle application, fit and function, supplier samples, product consistency, packaging and presentation. Where appropriate, physical inspection and fitment evaluation form part of final approval, and products must meet the programme's requirements before entering the catalogue.
Coverage includes the Porsche 356, 911, 912, 914, 924, 944 and 928, alongside the 964, 993, Boxster 986, 996, Cayenne, Cayman and 997. This gives owners, enthusiasts, independent specialists and professional workshops a Porsche-focused replacement option alongside Genuine Porsche parts. OE Match is intended to provide correctly specified, OE-equivalent replacements with sensible running costs rather than simply serving as a lower-cost alternative. Design911 selects the brands it carries for quality and fitment and can advise customers on suitable options for maintenance, restoration or upgrades.
- A replacement-parts programme developed specifically around Porsche applications.
- More than 9,000 product variants within the wider programme.
- Original Porsche part-number cross-references wherever applicable.
- Dedicated research, development, sample evaluation and quality-control processes.
- Classic and modern Porsche coverage for maintenance, repairs and restoration.
- Development focused on difficult-to-source and discontinued applications.
Categories we stock from this brand
Design911 stocks OE Match across an extensive range of Porsche mechanical, electrical, body, interior and maintenance categories. Original Porsche references help identify replacements where part numbers have been superseded or several versions exist. Always check the model, production year, engine, transmission, side or position, connector type where relevant and individual product notes. Incorrect application, mismatched versions, reused seals or hardware and worn supporting components can cause noise, premature wear, leaks, fitment problems or repeat failures. Safety-critical specifications and installation should be checked by a competent technician.
Engine components
OE Match engine coverage supports maintenance, repair and rebuilding work, ranging from small retaining hardware and brackets to components associated with the cylinder heads, crankcase, valve train and supporting engine systems.
- Confirm the engine type, capacity, production year and original reference.
- Inspect associated seals, fasteners and supporting components during engine work.
- Check whether components require specialist measuring, machining or installation procedures.
Engine seals and gaskets
Replacement seals and gaskets help address oil, coolant, air and vacuum leaks throughout classic and modern Porsche engines. The range supports individual repairs as well as more extensive engine resealing and rebuilding projects.
- Identify the source of a leak before replacing components.
- Check mating surfaces, housings and fasteners for wear or damage.
- Use the correct gasket or seal version for the engine and production year.
Cooling systems and radiators
OE Match cooling-system coverage includes components used to circulate coolant, control temperature and transfer heat away from the engine. These parts support repairs involving radiators, pipework, hoses, fittings and related cooling hardware.
- Investigate coolant loss, overheating, staining and damaged hoses promptly.
- Check pressure caps, clips, seals and connecting pipes during cooling-system work.
- Bleed and refill the system using the correct model-specific procedure.
Oil system components
Oil-system parts support engine lubrication, oil circulation, filtration and leak repair. Coverage can assist with routine servicing as well as work on oil lines, fittings, housings, seals and associated hardware.
- Confirm thread sizes, connection types and component position.
- Inspect flexible lines and seals for age-related hardening or leakage.
- Verify the required oil specification and system capacity separately.
Transmission and drivetrain
OE Match transmission and drivetrain parts support manual and automatic gearbox repairs, clutch operation, gear selection and the transfer of power to the driven wheels.
- Match parts to the exact gearbox or transmission code where specified.
- Check splines, bearings, seals, joints and supporting hardware for related wear.
- Diagnose noise, vibration or difficult gear selection before ordering components.
Engine and gearbox mounts
Replacement mounts help support the powertrain, maintain alignment and control unwanted engine and transmission movement. Worn mounts may contribute to vibration, knocking, drivetrain shunt or unsettled gear changes.
- Inspect mounts for cracking, collapse, separation and oil contamination.
- Check mounting bolts, washers, brackets and surrounding hardware.
- Consider replacing paired mounts together where required by the application.
Suspension and steering
OE Match suspension hardware and steering components support repairs intended to restore accurate wheel control, alignment and predictable steering response. Coverage includes wear-related items used around suspension joints, mounting points and steering assemblies.
- Investigate play, knocking, uneven tyre wear and unstable handling.
- Check left- and right-hand applications and axle position carefully.
- Arrange wheel alignment after replacing components that affect geometry.
Braking components
OE Match braking components form part of its Porsche-specific replacement programme. Brake work may address wear, restore stopping performance or prepare a car for fast-road or track use, but the specification of each component must suit the intended application.
- Symptoms prompting inspection include vibration, longer stopping distances, squealing, pulling to one side, warning lights and visible disc or pad wear.
- Confirm whether the selected component is an OE-equivalent replacement or a performance upgrade.
- Check whether new fitting kits, seals, hardware and pad wear sensors are required.
Electrical and ignition
Electrical and ignition coverage supports Porsche repairs involving starting, charging, ignition and engine-management faults. Correct diagnosis is particularly important because wiring, supply voltage, earth connections and other supporting components can produce similar symptoms.
- Typical symptoms include intermittent no-start, misfires, rough idle, poor charging, warning lights and heat-soak failures.
- Check the original reference, engine, production year and connector type.
- Test power supplies, earths and wiring before replacing electrical components.
Sensors and switches
OE Match sensors and switches provide replacement options for systems that monitor or control engine operation, temperature, pressure, position, lighting and driver warnings.
- Similar-looking sensors may have different calibrations, connectors or applications.
- Use fault codes as a diagnostic guide rather than proof that a sensor has failed.
- Inspect connectors for corrosion, damaged terminals and degraded wiring.
Heating and air conditioning
Heating, ventilation and air-conditioning components support cabin temperature control, airflow and demisting. The range covers replacement needs involving blower assemblies, controls, ducts, valves, fittings and related hardware.
- Check whether parts differ between left- and right-hand-drive vehicles.
- Confirm connector, housing and production-year variations.
- Refrigerant-system work should be completed by an appropriately qualified technician.
Exhaust components
OE Match exhaust coverage supports repairs to worn, corroded or leaking parts of the exhaust system, together with associated brackets, clamps, seals and fittings.
- Inspect joints, flanges, fixings and heat shields when replacing exhaust parts.
- Check emissions equipment and sensor positions for the specific model.
- Corroded fasteners may require additional hardware during installation.
Rubber seals and hoses
Rubber components are important throughout a Porsche for sealing fluids, air, weather and noise. OE Match coverage assists with replacing hardened, split, swollen, leaking or missing hoses, boots, grommets and sealing profiles.
- Match the shape, dimensions, connection points and intended fluid or system.
- Inspect adjoining clips, pipes and sealing surfaces.
- Age-related rubber deterioration can affect several nearby components at once.
Exterior trim and body components
Exterior and body coverage supports accident repair, cosmetic refurbishment and restoration. It includes replacement needs involving trim, lamps, brackets, fixings, seals and other model-specific body fittings.
- Confirm body style, side, position, colour and finish where applicable.
- Check whether clips, seals or mounting hardware are supplied separately.
- Compare the original component and reference before installation.
Interior components
OE Match interior products support the repair and restoration of cabin fittings that may have worn, faded, broken or become difficult to source with age.
- Check colour, finish, side and model-year variations.
- Inspect clips, brackets and fixing points before fitting replacement trim.
- Some interior components may differ according to body style or equipment specification.
Service and maintenance parts
OE Match service components support scheduled upkeep across Porsche generations, helping owners and workshops maintain reliability, efficiency and system protection while addressing everyday wear.
- Hard starting, rough idle, poor fuel economy and warning lights can accompany clogged filters or worn ignition components.
- Select service items against the exact Porsche model, engine, production year and required specification.
- Review related seals, hardware and other maintenance items when planning a larger service.
Restoration hardware
Restoration hardware covers the small but essential fasteners, brackets, clips, fittings and retaining components needed to complete repairs accurately and securely.
- Record the position and orientation of original hardware during dismantling.
- Check thread, length, finish, quantity and model application.
- Replacing damaged or heavily corroded hardware can prevent delays during reassembly.
Difficult-to-source and discontinued applications
A central purpose of the OE Match programme is identifying gaps where original Porsche parts have become difficult to obtain or are no longer available. Reintroduced components can help prevent one missing seal, clip, bracket or mechanical part from delaying an otherwise complete repair or restoration.
- Use OE cross-references and dimensions to verify the intended application.
- Check whether the original number has been superseded.
- Review product-specific fitment notes where several component versions exist.
Brake Pad Wear Sensors
OE Match brake pad wear sensors provide replacement options for Porsche brake servicing. Sensors may need renewal when pads are replaced or when a worn or damaged sensor causes a brake wear warning.
- Warning messages with new pads, damaged sensor cables and broken clips warrant inspection.
- Match the OE reference, caliper application, model year, connector and sensor position.
- Check the quantity required and whether sensors are included with the selected brake parts.
Engine Electrical
OE Match engine electrical parts cover starting, charging, ignition, sensor and switch applications. They support repairs involving intermittent no-start, misfires, rough idle, stalling, battery drain, poor charging, warning lights, inconsistent readings and heat-related failures.
- Similar-looking components may have different electrical or vehicle applications.
- Repeat faults can indicate a mismatched component or a worn supporting item.
- Battery condition, earth straps, connectors and voltage drop should be checked during diagnosis.
Service Parts
OE Match service parts cover everyday maintenance requirements intended to protect the engine, gearbox and other major systems. Routine replacement can address natural wear caused by heat, friction, fluid degradation and environmental exposure.
- Match filters, ignition parts, belts and fluids to the exact vehicle specification.
- Many symptoms overlap, so establishing a sound service baseline can assist diagnosis.
- Keep a service record to support future maintenance and fault finding.
Service Kits
OE Match service kits group key maintenance components to simplify servicing and establish a known baseline. They are particularly useful when catching up on overdue maintenance or assessing sluggish running, inconsistent idle, poor economy and reduced performance.
- Match each kit to the exact Porsche model, engine and production year.
- Contents vary, so review the included components rather than assuming every service item is supplied.
- Add any required while-you-are-there items, such as spark plugs, belts, fluids, seals or hardware.
Explore the range
Browse the OE Match Porsche range at Design911, then narrow your selection by model and category and cross-check the original part references and fitment notes. Whether you are planning routine maintenance, a workshop repair or a complete restoration, Design911's Porsche specialists can help identify suitable components within a programme focused on fitment, quality and long-term vehicle preservation.
This Vacuum Brake Booster is a OE MATCH Porsche braking system component designed to enhance braking performance by using engine vacuum pressure to assist pedal force. Mounted between the brake pedal assembly and master cylinder, the brake booster reduces the amount of physical effort required to apply the brakes, ensuring smooth, responsive, and controlled braking.
Fits:
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Diagram Ref No 4
What This Product Does:
- Amplifies brake pedal force using vacuum assistance
- Reduces driver effort required during braking
- Improves braking response and control
- Works with the brake master cylinder to generate hydraulic pressure
- Enhances overall braking safety and performance
Symptoms Of Wear Or Failure:
- Hard or stiff brake pedal requiring excessive force
- Reduced braking efficiency or response
- Hissing noise caused by vacuum leaks
- Engine idle issues linked to vacuum system leaks
- Increased stopping distance
- Brake warning lights or inconsistent pedal feel
Why Replacement Matters:
- Restores proper brake assistance and pedal feel
- Improves braking responsiveness and safety
- Prevents excessive strain on the braking system
- Eliminates vacuum leaks affecting engine and brake performance
- Ensures safe, predictable stopping power under all driving conditions
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99735592300
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Shop Securely
12 Month Warranty
Worldwide Delivery
This OE match brake master cylinder is a direct replacement for the original Porsche component fitted to 914-4 models produced between 1970 and 1976. Manufactured to factory specifications, it features a 17.05mm bore diameter, ensuring the correct hydraulic pressure and pedal feel for the original braking system.
Fits:
Porsche 914-4 1970 - 1976
Diagram ref no
The brake master cylinder converts mechanical pedal movement into hydraulic pressure, allowing brake fluid to activate the brake calipers. It ensures consistent braking force distribution for safe and controlled stopping performance.
Function
• Converts brake pedal force into hydraulic pressure
• Distributes brake fluid to brake calipers
• Maintains consistent braking response and pedal feel
• Supports safe and controlled stopping performance
• Operates as the central hydraulic component of the braking system
Brake master cylinders wear internally over time due to seal deterioration, moisture contamination, and repeated hydraulic pressure cycles. A failing master cylinder can lead to poor braking performance, fluid leaks, or loss of pedal pressure. Replacing it restores safe braking operation, proper hydraulic pressure, and reliable pedal feel.
When to replace
• Soft or spongy brake pedal
• Brake fluid leakage around master cylinder
• Reduced braking efficiency or inconsistent pedal feel
• Internal seal failure causing pressure loss
• During complete brake system restoration or overhaul
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91435501200
The product you are viewing cross references to these numbers
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Brake Caliper Piston & Seal Kit
1 kit per caliper - 2 required per car
High-quality rear brake caliper piston and seal kit designed for a range of classic Porsche transaxle and V8 models including the Porsche 924 turbo, 924S, 944 and 928 models
This complete rebuild kit is designed for rear brake
calipers fitted with 36mm pistons and provides the essential components
required to restore braking performance, hydraulic sealing, and smooth piston
operation.
Fits:
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Please
verify piston diameter before ordering.
Kit includes
1 x 36mm caliper piston
1 x 36mm piston
dust cap
1 x 36mm piston seal
1 x retaining spring
1 x bleed nipple and
cover
Manufactured to OEM specifications, these components ensure precise fitment, long-term durability, and reliable braking performance for classic Porsche models.
Key Features
• Rear brake caliper piston and seal kit
• Designed for 36mm rear brake calipers
• OEM-quality materials for reliability and durability
• Restores hydraulic sealing and piston movement
• Ideal for restoration and brake servicing projects
Function and Purpose
This kit is essential for maintaining rear brake caliper performance.
It helps to:
• Restore smooth caliper piston operation
• Maintain hydraulic pressure and braking consistency
• Prevent brake fluid leaks
• Protect pistons from dirt and moisture ingress
• Ensure safe and reliable braking performance
Why Replace Brake Pistons & Seals?
Brake caliper components can deteriorate over time due to age, moisture, and heat exposure.
Common issues include:
• Corroded or sticking pistons
• Worn or leaking piston seals
• Cracked dust caps
• Reduced braking efficiency
• Uneven brake performance
Replacing worn pistons and seals restores safe braking operation and improves reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
928107236
The product you are viewing cross references to these numbers
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 981 Boxster 2012-16 RHD
Porsche 981 Boxster Spyder 2016 RHD
Porsche 718 (982) Boxster 2017>> RHD
Porsche 981C Cayman 2013-16 RHD
Porsche 981C Cayman GT4 2016 RHD
Porsche 718C (982C) Cayman / S / T / GTS / GT4 2017>> RHD
Porsche 991.1 (911) Carrera 2012-16 RHD
Porsche 991.2 Carrera 2017>> RHD
Diagram ref no 6
Maintain clear visibility in all weather conditions with the OE Match Wiper Blades. Designed to meet original equipment specifications, these premium replacement wiper blades deliver smooth, streak-free performance and a precise fit for compatible Porsche models. Built with durable rubber compounds and an aerodynamic profile, they reduce wind lift and provide quiet operation at high speeds. Ideal for restoring factory-level wiping performance while preserving the authentic look of your Porsche.
Key Features:
- OE Match replacement for Porsche part number 99162890301
- Precision fit and factory-style appearance
- Smooth, quiet, streak-free wiping action
- Durable rubber construction for long service life
- Aerodynamic design helps reduce wind lift
- Simple direct-fit installation
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99162890301
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Brake Caliper Piston & Seal Kit
1 kit per caliper - 2 required per car
High-quality rear brake caliper piston and seal kit designed for classic Porsche 356B, 356C, 912, and early 911 2.0ltr models.
This complete rebuild kit restores braking performance, hydraulic sealing, and
smooth piston operation for rear brake calipers fitted with 35mm pistons.
Fits:
- Porsche 356B 2000 GS Carrera 2
- Porsche 356BC 1600
- Porsche 356BC 1600 SC
- Porsche 356BC 2000 GS Carrera 2
- Porsche 356BB 2000 GS Carrera 2
- Porsche 356BC 1600
- Porsche 356BC 1600 SC
- Porsche 356BC 2000 GS Carrera 2
- Porsche 911 2.0ltr
- Porsche 912 1.6ltr
Please
verify piston diameter before ordering.
Kit contains
- 2 x 35mm caliper pistons
- 2 x 35mm piston dust caps
- 2 x 35mm piston seals
- 2 x bleed nipples with covers
Manufactured to OEM specifications, these components ensure precise fitment, reliable hydraulic sealing, and long-term durability. Ideal for classic Porsche restoration projects, brake servicing, or preventative maintenance.
Key Features
• Rear brake caliper piston and seal kit
• Designed for 35mm rear brake caliper pistons
• OEM-quality materials for reliability and durability
• Restores hydraulic sealing and piston movement
• Ideal for classic Porsche brake rebuilds
• Suitable for restoration and maintenance projects
Function and Purpose
This kit is essential for maintaining rear brake caliper performance.
It helps to:
• Restore smooth piston operation
• Maintain correct hydraulic pressure
• Prevent brake fluid leaks
• Protect pistons from dirt and moisture
• Ensure safe and consistent braking performance
Why Replace Brake Pistons & Seals?
Brake caliper components wear over time due to age, moisture, and heat.
Common issues include:
• Corroded or sticking pistons
• Perished seals and dust caps
• Brake fluid leaks
• Reduced braking efficiency
• Uneven braking performance
Replacing pistons and seals restores reliability, safety, and original braking feel.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
356946235
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Brake Caliper Piston & Seal Kit - 4 Piston 34mm
Rear Calipers
1 kit per caliper - 2 required per car
High-quality rear brake caliper piston and seal kit designed for Porsche 4 piston rear brake calipers with 34mm pistons. This complete rebuild kit restores braking performance, hydraulic sealing, and smooth piston operation on high-performance Porsche models.
Fits:
- Porsche Boxster Spyder 718 4.0L 01/2019>>
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman GT4 3.8L 2015-16
-
Porsche Cayman GT4 718 4.0L
Manufactured to OEM specifications, these components ensure precise fitment, excellent durability, and reliable braking performance. Ideal for routine maintenance, brake system servicing, or performance rebuilds on Porsche GT and turbo models.
Please
verify piston diameter before ordering.
Kit contains
4 x 34mm caliper pistons
4 x 34mm piston dust caps
4 x 34mm piston seals
2 x bleed covers
Please check piston diameters before ordering
Key Features
• Rear brake caliper piston and seal kit
• Designed for 4 piston rear brake calipers
• Suitable for 34mm pistons
• OEM-quality materials for reliability and durability
• Restores braking performance and hydraulic sealing
• Ideal for brake caliper rebuilds and maintenance
Function and Purpose
This kit is essential for restoring rear brake caliper operation.
It helps to:
• Replace worn or corroded caliper pistons
• Restore hydraulic sealing and pressure retention
• Maintain smooth piston movement
• Protect against dirt and moisture contamination
• Support consistent braking performance
Why Replace Brake Pistons & Seals?
Brake components wear over time due to heat, pressure, and contamination.
Common issues include:
• Brake fluid leaks
• Corroded or sticking pistons
• Uneven braking performance
• Reduced braking efficiency
• Damaged dust caps and seals
Replacing pistons and seals together restores braking reliability, safety, and caliper performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
718989234
The product you are viewing cross references to these numbers
- Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Brake Caliper Dust Cap & Seal Kit 4 Piston 34mm Rear Calipers
1 kit per caliper - 2 required per car
High-quality rear brake caliper dust cap and seal kit designed for the 4 piston rear brake calipers with 34mm pistons.
This complete rebuild kit restores braking performance, caliper sealing, and
piston protection on high-performance Porsche models.
Fits:
- Porsche Boxster Spyder 718 4.0L 01/2019>>
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L
Please
verify piston diameter before ordering.
Kit includes
4 x 34mm piston dust caps
4 x 34mm piston
seals
2 x bleed covers
Manufactured to OEM specifications, these components ensure
precise fitment, reliable hydraulic sealing, and long-term durability. Ideal
for routine brake maintenance, performance servicing, or complete caliper
restoration.
Key Features
• Rear brake caliper dust cap and seal kit
• Suitable for 34mm pistons
• OEM-quality materials for durability and reliability
• Restores hydraulic sealing and piston protection
• Ideal for brake caliper rebuilds and servicing
• Suitable for road and performance applications
Function and Purpose
This kit is essential for rear brake caliper maintenance.
It helps to:
• Restore proper caliper hydraulic sealing
• Protect pistons from dirt and moisture contamination
• Maintain smooth piston movement
• Prevent brake fluid leaks
• Support consistent braking performance
Why Replace Brake Caliper Seals & Dust Caps?
Brake caliper seals and dust caps wear over time due to heat and contamination.
Common issues include:
• Brake fluid leaks
• Cracked or damaged dust caps
• Corrosion around pistons
• Reduced braking efficiency
• Sticking or uneven piston movement
Replacing seals and dust caps restores safe and reliable braking operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
718091234
The product you are viewing cross references to these numbers
- Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Brake Caliper Piston & Seal Kit
1 kit per caliper - 2 required per car
Complete rear brake caliper piston and seal kit designed for
Porsche 9YA Cayenne models fitted with black or green rear brake calipers using
option codes 1KR, 1KV, and 1KZ
Fits:
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
- Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
- Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
- Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid V6 3.0L (470Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid Coupe V6 3.0L (470Hp) 2023>>
This high-quality rebuild kit includes all essential components required to restore rear caliper performance, hydraulic sealing, and braking reliability.
Please
verify piston diameter before ordering.
Kit contains
2 x 44mm caliper pistons
2 x 44mm piston dust caps
2 x 44mm piston seals
2 x bleed nipples and covers
Manufactured to OEM specifications, this kit ensures precise fitment, smooth piston operation, and long-term durability. Ideal for brake maintenance, repair, or full caliper rebuilds on modern Porsche Cayenne models.
Key Features
• Rear brake caliper piston and seal kit
• Designed for 2 piston 44mm rear calipers
• Suitable for Porsche 9YA Cayenne with black or green calipers
• Compatible with option codes 1KR, 1KV, 1KZ
• OEM-quality materials for durability and reliability
• Complete rear caliper rebuild solution
Function and Purpose
This kit is essential for restoring rear brake caliper performance.
It helps to:
• Replace worn or corroded caliper pistons
• Restore hydraulic sealing within the caliper
• Maintain consistent braking pressure
• Ensure smooth piston movement
• Protect against contamination and moisture ingress
Why Replace Brake Pistons & Seals?
Brake components are exposed to heat, pressure, and environmental contaminants.
Common issues include:
• Brake fluid leaks
• Corroded or sticking pistons
• Reduced braking efficiency
• Uneven brake wear
• Damaged seals and dust caps
Replacing pistons and seals together restores braking performance and reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9Y0958244
The product you are viewing cross references to these numbers
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
- Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
- Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
- Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid V6 3.0L (470Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid Coupe V6 3.0L (470Hp) 2023>>
- Porsche 9YA.2 Cayenne GTS V8 4.0L Bi-Turbo Petrol 2023>>
- Porsche 9YA.2 Cayenne GTS Coupe V8 4.0L Bi-Turbo 2023>>
Shop Securely
12 Month Warranty
Worldwide Delivery
This OE Match front wiper blade set is a direct replacement for the original Porsche component fitted to a wide range of Boxster, 911, and Cayman models. Supplied as a PACK OF 2, it includes both driver and passenger side blades for complete front windscreen coverage. The set is suitable for both right-hand drive (RHD) and left-hand drive (LHD) vehicles. If the passenger blade appears reversed during installation, the retaining clip can simply be removed and repositioned accordingly.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Porsche 996 1997 - 2005 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Manufactured to OE specifications, these blades are engineered to provide smooth, quiet, and streak-free wiping performance. The aerodynamic blade profile ensures even pressure distribution across the glass, improving visibility in wet or adverse weather conditions.
Function
• Clears rain, dirt, and debris from windscreen
• Maintains clear forward visibility
• Provides smooth and streak-free wiping action
• Reduces noise and vibration during operation
• Ensures even pressure across the windscreen surface
Wiper blades naturally wear over time due to exposure to sunlight, dirt, temperature changes, and repeated use. Worn blades can cause streaking, smearing, and poor visibility, especially during heavy rain. Replacing them restores effective wiping performance and improves driving safety.
When to replace
• Streaking or smearing on windscreen
• Squeaking or chattering during operation
• Visible cracks or wear on rubber edge
• Reduced visibility in wet weather
• As part of regular vehicle maintenance
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99662890111
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Water pump, Thermostat, Cam & Balance Belt Kit Porsche 944 2.7L
Fits:Porsche 944 2.7ltr - 1988 to 1989
8V ENGINE WITH AUTO ADJUSTER
Changing the water pump, pulley, and belts on an older Porsche 944 is essential for maintaining the car’s performance and preventing expensive repairs down the line. Here’s why:
1. Water Pump: The water pump is crucial for keeping the engine cool by circulating coolant throughout the system. Over time, the seals can wear out, and the pump itself can become less efficient or even fail completely. A failed water pump can cause the engine to overheat, leading to severe engine damage, which is costly to repair. Since the water pump is typically driven by the timing belt, replacing it during a timing belt service is a preventive measure.
2. Pulley: The pulleys, including the ones for the timing belt and accessory belts, can degrade over time due to wear and tear. If a pulley starts to fail, it can cause the belt to misalign or slip, which can lead to loss of power to critical systems like the water pump, alternator, or power steering. A worn-out pulley might also cause abnormal noises (like squealing) or vibrations, and in the worst case, it can lead to belt failure or further engine damage.
3. Belts: The timing belt and accessory belts (serpentine or V-belts) stretch and wear over time. A snapped timing belt can cause catastrophic engine damage, especially on interference engines like the 944’s. The accessory belts keep things like the alternator, air conditioning, and power steering working properly, and if they break, you’ll lose those functions—and possibly risk engine overheating if the water pump is driven by one of those belts.
4. Preventive Maintenance: On older cars, these parts have a limited lifespan, and replacing them as part of regular maintenance helps avoid major issues. The 944 is a well-built car, but its aging components need attention. Replacing the water pump, pulleys, and belts before they fail ensures your car runs smoothly and can help avoid the inconvenience and cost of unexpected breakdowns.
5. Improved Reliability: By proactively replacing these parts, you improve the overall reliability of your 944, ensuring that you can enjoy it without worrying about the engine overheating or being stranded due to a failed belt or pulley. In short, regular replacement of the water pump, pulleys, and belts is part of smart ownership for an older Porsche 944, helping preserve the engine’s health and longevity.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.944.27.OEM
The product you are viewing cross references to these numbers
- Porsche 944 2.7L 8V 1988-89
Performance Cam Follower Set – Set of 8
Upgrade the durability and performance of your Porsche 356 or Porsche 912 engine with this premium performance cam follower set, supplied as a complete engine set of 8.
Fits:
- Porsche 911 1966-1968 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram ref no 6
Manufactured from high-strength tool steel, these upgraded valve lifters are engineered to deliver exceptional wear resistance, superior reliability, and long-term valvetrain stability—making them ideal for restored, rebuilt, or performance air-cooled Porsche engines.
Factory-style cam followers can suffer from pitting, surface wear, and fatigue over time, particularly in performance applications or high-mileage engines. These precision-engineered tool steel followers are designed to eliminate those weaknesses while helping protect valuable camshaft components from premature wear.
Built for enthusiasts and professional engine builders alike, this complete set provides the strength and consistency needed for long-term engine reliability.
Never replace your valve lifters again.
Key Features
• Performance cam follower set for Porsche 356 and 912
• Complete engine set of 8 followers
• Manufactured from premium-grade tool steel
• Exceptional wear resistance and durability
• Designed for long-term valvetrain reliability
• Helps protect camshaft surfaces from wear
• Precision engineered for accurate fitment
• Suitable for performance, restoration, or rebuilt engines
• Ideal for road, touring, or motorsport applications
Function and Purpose
These cam followers are critical valvetrain components.
They help to:
• Transfer camshaft motion efficiently to the valvetrain
• Maintain stable valve operation at higher RPM
• Reduce wear on camshaft lobes
• Improve long-term engine reliability
• Support performance and rebuilt engine applications
Why Upgrade to Tool Steel Cam Followers?
Standard valve lifters can deteriorate over time due to:
• Surface fatigue and pitting
• Excessive friction and wear
• Loss of hardness under stress
• Camshaft damage caused by poor lifter condition
Tool steel cam followers provide:
• Superior hardness and wear resistance
• Improved lubrication characteristics
• Greater durability under high loads
• Long-term reliability for air-cooled engines
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610520100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
This Rear Anti-Roll Bar Rubber Bush is a OE MATCH Porsche 970 Panamera suspension component designed to securely mount and cushion the rear anti-roll bar (stabilizer bar) to the vehicle chassis. This rubber bush allows controlled movement of the anti-roll bar while reducing vibration, noise, and suspension play.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Diagram Ref No 2
What This Product Does:
- Secures the rear anti-roll bar to the chassis
- Allows controlled movement of the stabilizer bar
- Reduces body roll during cornering
- Absorbs vibration and suspension noise
- Improves handling stability and rear-end control
Symptoms Of Wear Or Failure:
- Clunking or knocking noises from the rear suspension
- Excessive body roll during cornering
- Loose or unstable rear handling feel
- Squeaking noises from the anti-roll bar area
- Uneven suspension response
- Visible cracking, wear, or deformation of the bush
Why Replacement Matters:
- Restores proper anti-roll bar function
- Improves handling stability and cornering control
- Reduces suspension noise and vibration
- Prevents excessive wear on related suspension components
- Ensures smooth and predictable driving characteristics
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97033379206
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Shop Securely
12 Month Warranty
Worldwide Delivery
This Front Anti Roll Bar Stabilizer Bush is a OE MATCH Porsche 957 / 958 Cayenne suspension component designed to securely mount and cushion the front anti-roll bar (sway bar) to the vehicle chassis. This bush allows controlled movement of the anti-roll bar while reducing vibration, noise, and unwanted suspension play.
Sold Each.
x4 Required Per Car.
Fits:
For Cars With Front And Rear Anti-Roll Bars With Active Body Control - PDCC- (I0AW)
Diagram Ref No 3
What This Product Does:
Symptoms Of Wear Or Failure:
- Clunking or knocking noises from the front suspension
- Excessive body roll during cornering
- Loose or unstable handling feel
- Squeaking noises from the anti-roll bar area
- Uneven suspension response
- Visible cracking, wear, or deformation of the bush
Why Replacement Matters:
- Restores proper anti-roll bar function
- Improves handling stability and cornering control
- Reduces suspension noise and vibration
- Prevents excessive wear on related suspension components
- Ensures smooth and predictable driving characteristics
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534379300
The product you are viewing cross references to these numbers
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
This Mounting Bush Front Upper Wishbone is a OE MATCH Porsche 955 / 957 Cayenne suspension component designed to connect the front upper wishbone (control arm) to the vehicle chassis while allowing controlled suspension movement. This mounting bush absorbs road shock and vibration while maintaining precise suspension geometry for optimal handling and ride comfort.
Sold Each.
x2 Required Per Wishbone.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Fits On To Diagram Ref No 15
What This Product Does:
- Connects the front upper wishbone to the chassis
- Absorbs road shocks and vibrations
- Maintains proper suspension alignment and geometry
- Allows controlled suspension articulation
- Improves ride comfort and steering stability
Symptoms Of Wear Or Failure:
- Clunking or knocking noises from the front suspension
- Loose or unstable steering feel Uneven tyre wear
- Excessive vibration through the steering wheel
- Reduced handling precision and stability
- Visible cracking or deterioration of the rubber bush
Why Replacement Matters:
- Restores correct suspension alignment and geometry
- Improves steering response and vehicle stability
- Reduces vibration and road noise for a smoother drive
- Prevents premature wear of tyres and suspension components
- Ensures safe and predictable handling characteristics
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534102702
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Shop Securely
12 Month Warranty
Worldwide Delivery
This OE Match wiper blade set is a direct replacement for the original Porsche component used on 992-generation 911 models. Supplied as a complete set, it includes both driver and passenger side blades, ensuring balanced and consistent wiping performance. Designed specifically for right-hand drive (RHD) vehicles, the blades are engineered to match the curvature of the windscreen and the sweep pattern of the factory wiper arms.
Fits:
Porsche 992.1 2019 - 2024
Porsche 992.2 2024 >>
Diagram ref no 8
• Configuration: Right-Hand Drive (RHD) vehicles only
• Supplied as: Complete front set (driver + passenger blades)
• OE reference: 992955425CY
• Supersedes: 992955425AY
• Quantity: 1 set per vehicle
This wiper blade set clears rain, dirt, and debris from the windscreen, ensuring clear forward visibility. It maintains consistent contact with the glass for smooth, quiet operation and improved safety during driving.
Function
• Clears water, dirt, and debris from windscreen
• Provides even pressure across glass surface
• Ensures streak-free wiping performance
• Reduces noise and vibration during operation
• Enhances visibility in all weather conditions
Wiper blades wear over time due to exposure to UV, dirt, and weather conditions. Worn blades can cause streaking, noise, and reduced visibility, especially in heavy rain. Replacing them ensures clear vision, safe driving conditions, and optimal performance of the wiper system.
When to replace
• Streaking or uneven wiping performance
• Squeaking or noise during operation
• Visible cracks or wear on rubber edge
• Reduced visibility in wet conditions
• As part of routine maintenance (typically every 6–12 months)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992955425CY
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.1 GT3 RS 4.0L 2022-24
- Porsche 992.1 (911) Sport Classic 3.8L 2023
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera T 3.0L 2024>>
- Porsche 992.2 Carrera 4S 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS / Spirit 70 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo S 3.6L 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
This Rear Differential Rubber Mount is a OE MATCH Porsche 970 Panamera drivetrain component designed to securely support the rear differential while isolating vibration and absorbing drivetrain movement. Positioned between the differential and the subframe, this mount plays a crucial role in maintaining stability, alignment, and smooth power delivery.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Diagram Ref No 3
What This Product Does:
- Supports and stabilises the rear differential
- Absorbs drivetrain vibration and movement
- Maintains correct alignment of rear axle components
- Reduces noise and harshness (NVH) for improved comfort
- Ensures smooth and controlled power transfer
Symptoms Of Wear Or Failure:
- Clunking or knocking noises from the rear during acceleration or gear changes
- Excessive drivetrain movement under load
- Increased vibration felt through the vehicle
- Loose or unstable rear-end feel
- Premature wear on surrounding drivetrain components
- Visible cracking or deterioration of the rubber mount
Why Replacement Matters:
- Restores stability and correct alignment of the differential
- Reduces vibration and noise for a smoother driving experience
- Prevents excessive stress on drivetrain and suspension components
- Improves handling and driving control
- Ensures long-term durability of the rear axle assembly
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97037506100
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed