Valeo

Clutch Slave Cylinder.
Restore smooth, consistent clutch operation with this Valeo Clutch Slave Cylinder. Valeo is a recognised Original Equipment supplier of automotive clutch and hydraulic components, producing high-quality replacement parts designed for accurate fit, dependable hydraulic performance, and long service life.
 
Fits:

• Porsche 955 Cayenne 3.2L V6 2003-06
• Porsche 955 Cayenne S 4.5L V8 2003-06
• Porsche 955 Cayenne Turbo 4.5L 2003-06
• Porsche 955 Cayenne Turbo S 4.5L 2006>>
• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S / GTS 4.8L 2007-10
• Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-14
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-14
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-14
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-14
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-14
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-14
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-14
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-14 

IG0L - 6 speed manual transmission for all-wheel drive

• Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13

PR:480- 6 speed manual transmission for all-wheel drive

Diagram Ref No 15

The clutch slave cylinder is a key component of the vehicle's hydraulic clutch system. When the clutch pedal is pressed, hydraulic pressure generated by the clutch master cylinder is transferred through the clutch fluid circuit to the slave cylinder. The slave cylinder converts this hydraulic pressure into mechanical movement, operating the clutch release mechanism so the clutch can disengage from the engine and allow smooth gear selection.

What This Product Does:

• Forms part of the hydraulic clutch operating system.
• Receives hydraulic pressure from the clutch master cylinder.
• Converts hydraulic pressure into mechanical movement.
• Operates the clutch release mechanism.
• Allows the clutch to disengage when the pedal is pressed.
• Supports smooth and consistent gear selection.
• Helps maintain correct clutch pedal operation.
• Replaces a leaking, worn, sticking, or failed slave cylinder.
• Provides an OE-quality fit for compatible applications.

Symptoms Of Wear Or Failure:

• Difficulty selecting or changing gears.
• Clutch pedal feeling soft or spongy.
• Clutch pedal remaining close to or on the floor.
• Clutch pedal failing to return normally.
• Inconsistent clutch pedal pressure.
• Clutch failing to disengage completely.
• Vehicle creeping with the clutch pedal fully depressed.
• Grinding when attempting to select a gear.
• Visible hydraulic fluid leakage.
• Falling clutch/brake fluid level where a shared reservoir is used.
• Repeated need to bleed the clutch hydraulic system.
• Air entering the hydraulic circuit.

Why Replacement Matters:

• The clutch slave cylinder is essential for transferring hydraulic pressure into the movement required to disengage the clutch. If its internal seals deteriorate or the cylinder begins to leak, hydraulic pressure can be lost and clutch operation may become increasingly inconsistent.
• A failing slave cylinder can initially cause a soft or spongy pedal, difficult gear selection, or incomplete clutch disengagement. As the problem worsens, the clutch pedal may remain on the floor or the clutch may stop disengaging altogether, potentially leaving the vehicle unable to select gears or drive normally.
• Continuing to operate a vehicle with incomplete clutch disengagement can also place unnecessary strain on the gearbox synchronisers and other clutch or transmission components. Hydraulic fluid leakage should be addressed promptly, particularly where the clutch system shares its fluid reservoir with other hydraulic systems.
• Replacing a worn or leaking unit with this Valeo Clutch Slave Cylinder restores dependable hydraulic operation, consistent clutch pedal response, and smooth clutch disengagement. Manufactured to Valeo's high-quality standards, this slave cylinder provides accurate fit, reliable hydraulic performance, and long-term durability for Porsche clutch maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95811623700

The product you are viewing cross references to these numbers

Front Bumper Inner Parking Sensor.
Restore accurate parking assistance and reliable close-range obstacle detection with this Valeo Front Bumper Inner Parking Sensor. Valeo is a recognised Original Equipment supplier of automotive electronic and driver-assistance systems, producing high-quality parking sensors designed for accurate fit, dependable detection, and reliable long-term operation.
 
Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-14
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-14
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-14
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-14
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-14
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-14
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-14
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-14

I7X2 - for cars with ParkAssist, front/rear
I7X7 - for cars with Ultrasound parking aid with camera (LOW)
I7X8 - cars with Ultrasound parking aid and reversing camera

• Porsche Boxster 981 2.7L 2012-16
• Porsche Boxster 981 S / GTS 3.4L 2012-16
• Porsche Boxster 981 Spyder 3.8L 2016
• Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
• Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
• Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
• Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
• Porsche Cayman 2.7L 981 2013-16Porsche Cayman S / GTS 3.4L 981 2013-16
• Porsche Cayman GT4 3.8L 2015-16  

Diagram Ref No 2

Mounted in the inner position of the front bumper, the parking sensor forms part of the vehicle's Park Assist system. Using ultrasonic technology, it sends out high-frequency sound waves and measures the reflections returned from nearby objects. The parking assistance control system uses this information to determine the approximate distance between the front bumper and an obstacle, providing the driver with audible and, where equipped, visual warnings.

What This Product Does:

• Detects obstacles close to the front of the vehicle.
• Uses ultrasonic signals to measure proximity to nearby objects.
• Sends distance information to the parking assistance system.
• Supports audible parking proximity warnings.
• Supports visual parking information where fitted.
• Helps the driver manoeuvre accurately in confined spaces.
• Provides additional awareness of objects that may be difficult to see.
• Replaces a faulty or damaged inner front bumper sensor.
• Provides an OE-quality fit for compatible applications.

Symptoms Of Wear Or Failure:

• Parking assistance warning displayed on the dashboard.
• Front parking sensors failing to operate.
• Continuous warning tone despite no nearby obstacle.
• Sensor failing to detect objects.
• Intermittent or inaccurate distance warnings.
• One section of the front parking display not responding correctly.
• Parking assistance system becoming unavailable or disabled.
• Diagnostic fault codes identifying an individual parking sensor.
• Visible impact, cracking, or physical damage to the sensor.
• Corrosion, moisture ingress, or damage around the electrical connector.

Why Replacement Matters:

• Parking sensors provide valuable additional awareness when manoeuvring close to walls, parked vehicles, posts, kerbs, and other obstacles. A faulty inner front sensor can create a blind area within the parking assistance system or produce inaccurate warnings, reducing the driver's ability to judge available space.
• Depending on the vehicle's system design, a single failed sensor may also cause the entire parking assistance system, or part of it, to become unavailable. False warnings can make the system difficult to rely on, while a sensor that fails to recognise an obstacle may increase the risk of low-speed bumper or bodywork damage.
• Replacing a damaged or faulty unit with this Valeo Front Bumper Inner Parking Sensor restores accurate proximity detection, dependable parking assistance, and confidence when manoeuvring in confined spaces. Manufactured to Valeo's high-quality standards, this sensor provides accurate fit, reliable electronic performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1S0919275CG2L

The product you are viewing cross references to these numbers

Blower For Air Conditioning, RHD.
Restore effective cabin airflow and dependable climate-control performance with this Valeo Air Conditioning Blower for Right-Hand Drive (RHD) vehicles. Valeo is a recognised Original Equipment supplier of automotive heating, ventilation, and air-conditioning components, producing high-quality parts designed for accurate fit, reliable operation, and long service life.

Fits:

• Porsche 955 Cayenne 3.2L V6 2003-06
• Porsche 955 Cayenne S 4.5L V8 2003-06
• Porsche 955 Cayenne Turbo 4.5L 2003-06
• Porsche 955 Cayenne Turbo S 4.5L 2006>>
• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S / GTS 4.8L 2007-10
• Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10  

Diagram Ref No 34

The cabin blower is a key component of the vehicle's heating, ventilation, and air-conditioning (HVAC) system. Its electric motor drives the blower fan, drawing air into the HVAC housing and forcing it through the heater matrix or air-conditioning evaporator before distributing it through the dashboard, footwell, and windscreen vents. By varying blower speed, the climate-control system can regulate cabin airflow for heating, cooling, ventilation, and windscreen demisting.

What This Product Does:

• Generates airflow through the vehicle's HVAC system.
• Circulates heated or cooled air throughout the cabin.
• Supplies airflow to dashboard, footwell, and windscreen vents.
• Supports effective air-conditioning and heating performance.
• Helps demist and defrost the windscreen.
• Operates at different speeds according to climate-control settings.
• Replaces a noisy, weak, intermittent, or failed cabin blower.
• Provides an OE-quality configuration for compatible RHD vehicles.

Symptoms Of Wear Or Failure:

• Little or no airflow from the cabin vents.
• Blower failing to operate at any speed.
• Intermittent blower operation.
• Airflow becoming weaker than normal.
• Squeaking, chirping, grinding, or rattling from behind the dashboard.
  
• Blower speed fluctuating unexpectedly.
• Fan taking time to start after the climate control is switched on.
• Blower motor stopping after prolonged operation.
• Burning smell or signs of an overheating blower motor.
• Reduced windscreen demisting or defrosting performance.

Why Replacement Matters:

• The cabin blower is essential for moving air through the heating and air-conditioning system. Even if the air-conditioning refrigeration system and heater are operating correctly, a weak or failed blower can prevent conditioned air from being distributed effectively throughout the cabin.
• A deteriorating blower motor may become noisy, operate intermittently, produce reduced airflow, or stop completely. This can reduce heating and cooling effectiveness and make it more difficult to maintain a comfortable cabin temperature. Poor airflow can also significantly affect windscreen demisting and defrosting, potentially reducing visibility in cold, damp, or humid conditions.
• A worn motor may also draw excessive electrical current or overheat, placing additional strain on associated electrical components and the blower control system.
• Replacing a worn or failed unit with this Valeo Blower for Air Conditioning, RHD 95557234301/2 restores strong and consistent cabin airflow, supports effective heating and air-conditioning performance, and improves windscreen demisting. Manufactured to Valeo's high-quality standards and configured for right-hand-drive applications, this blower provides accurate fit, dependable performance, and long-term reliability for Porsche HVAC maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95557234301

The product you are viewing cross references to these numbers

Window Lift Cable, Left. 
Restore smooth and dependable operation of the left-side window with this Valeo Window Lift Cable, Left. Valeo is a recognised Original Equipment supplier of automotive electrical and comfort-system components, producing high-quality replacement parts designed for accurate fit, reliable operation, and long service life.

Fits:

• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche Boxster 987 MKII 2.9L 2009-12
• Porsche Boxster S 987 MKII 3.4L 2009-12
• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 / GT3 RS 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII GT3 / GT3 RS 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08
• Porsche Cayman 2.9L 987C MKII 2009-12
• Porsche Cayman S / R 3.4L 987C MKII 2009-12  

Diagram Ref No 1

The window lift cable is a critical part of the window regulator mechanism. When the electric window switch is operated, the window motor drives the regulator while the cable transfers movement through the mechanism to raise or lower the window glass. Correct cable tension and smooth movement are essential for keeping the glass correctly aligned within its guides and ensuring consistent opening and closing.  

What This Product Does:

• Forms part of the electric window regulator mechanism.
• Transfers movement through the regulator to the window carrier.
• Enables the left-side window glass to raise and lower.
• Helps maintain correct window alignment during operation.
• Supports smooth and consistent window movement.
• Maintains the required cable tension within the regulator mechanism.
• Replaces a stretched, frayed, kinked, or broken cable.
• Provides an OE-quality replacement for the original component.

Symptoms Of Wear Or Failure:

• Left window failing to raise or lower.
• Window moving slowly or unevenly.
• Glass tilting or becoming misaligned during operation.
• Window becoming stuck in one position.
• Glass dropping unexpectedly inside the door.
• Grinding, clicking, scraping, or crunching noises from inside the door.
• Window motor operating while the glass remains stationary.
• Window requiring assistance to move up or down.
• Window failing to close completely.
• Visible fraying, stretching, kinking, or breakage of the regulator cable.

Why Replacement Matters:

• The window lift cable is essential for transferring movement through the regulator and accurately controlling the position of the window glass. A stretched or frayed cable can cause slow, noisy, or uneven window movement, while a broken cable can leave the glass completely inoperative or allow it to drop unexpectedly.
• A window that cannot close correctly can expose the vehicle interior to rain, moisture, dirt, and potential security risks. Incorrect glass alignment may also affect sealing against the window weatherstrips, potentially contributing to wind noise or water ingress.
• Continuing to operate the electric window with a damaged cable can place additional strain on the motor, pulleys, guides, and other regulator components, potentially increasing the extent and cost of the repair.
• Replacing the worn or damaged component with this Valeo Window Lift Cable, Left 98754207504/2 restores smooth window movement, helps maintain correct glass alignment, and supports dependable operation of the electric window system. Manufactured to Valeo's high-quality standards, this replacement cable provides accurate fit, reliable function, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98754207504

The product you are viewing cross references to these numbers

Window Lift Cable, Rear Door.
Restore smooth and reliable operation of the rear door window with this Valeo Rear Door Window Lift Cable. Valeo is a recognised Original Equipment supplier of automotive electrical and comfort-system components, producing high-quality replacement parts designed for accurate fit, dependable operation, and long service life.

Fits:

• Porsche 955 Cayenne 3.2L V6 2003-06
• Porsche 955 Cayenne S 4.5L V8 2003-06
• Porsche 955 Cayenne Turbo 4.5L 2003-06
• Porsche 955 Cayenne Turbo S 4.5L 2006>>
• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S / GTS 4.8L 2007-10
• Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10  

Diagram Ref No 1

The window lift cable forms a critical part of the rear door window regulator mechanism. When the electric window switch is operated, the window motor drives the regulator mechanism, while the cable transfers this movement to raise or lower the window glass along its guides. Correct cable tension and movement are essential for keeping the glass aligned and allowing it to travel smoothly between the fully open and closed positions. 

What This Product Does: 

• Forms part of the rear electric window regulator mechanism.
• Transfers movement from the regulator drive mechanism to the window carrier.
• Raises and lowers the rear door window glass.
• Helps maintain correct window movement and alignment.
• Supports smooth opening and closing of the window.
• Maintains correct cable tension within the regulator mechanism.
• Replaces a stretched, frayed, damaged, or broken window lift cable.
• Provides an OE-quality replacement for the original component.

Symptoms Of Wear Or Failure:

• Rear window failing to raise or lower.
• Window moving slowly or unevenly.
• Glass dropping unexpectedly inside the door.
• Window becoming stuck in one position.
• Window tilting or moving out of alignment.
• Grinding, clicking, scraping, or crunching noises inside the door.
• Window motor operating but the glass not moving.
• Window requiring assistance to move up or down.
• Visible fraying, stretching, kinking, or breakage of the regulator cable.
• Window failing to close completely.

Why Replacement Matters:

• The window lift cable is essential for transferring movement through the window regulator and controlling the position of the rear door glass. A stretched or frayed cable can cause slow, uneven, or noisy window movement, while a broken cable may leave the glass completely inoperative or allow it to drop inside the door.
• A window that cannot close correctly can expose the vehicle interior to rain, moisture, dirt, and security risks. Continued operation of a regulator with a damaged cable may also place additional strain on the window motor, pulleys, guides, and other regulator components, potentially turning a relatively straightforward repair into a more extensive replacement.
• Replacing a worn or damaged component with this Valeo Rear Door Window Lift Cable 95553346103/2 or 95553346203/2 restores smooth window movement, helps maintain correct glass alignment, and supports reliable operation of the rear electric window system. Manufactured to Valeo's high-quality standards, this replacement cable provides dependable fit, function, and durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95553346

The product you are viewing cross references to these numbers

Alternator Belt Pulley With Free Wheel Lock.
Restore smooth and reliable operation of the auxiliary drive system with this Valeo Alternator Belt Pulley with Free Wheel Lock. Valeo is a recognised Original Equipment supplier of automotive electrical and drive-system components, producing high-quality parts designed for accurate fit, dependable performance, and long service life.

Fits:

• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08  

Cars With Option Codes:
I480 - 6-Speed Manual Transmission
I481 - 5th-Speed Manual Transmission

Diagram Ref No 21

The alternator pulley transfers drive from the auxiliary belt to the alternator while its integrated freewheel/overrunning mechanism allows controlled rotational movement between the alternator and engine. This helps isolate the alternator's rotating mass from rapid changes in engine speed, reducing belt vibration, tension fluctuations, and shock loads throughout the auxiliary drive system.

What This Product Does:

• Transfers auxiliary belt drive to the alternator.
• Allows the alternator to freewheel or overrun when required.
• Helps absorb rapid changes in engine rotational speed.
• Reduces vibration and oscillation within the auxiliary belt.
• Helps stabilise belt tension during engine speed changes.
• Reduces shock loading on the alternator and belt-drive components.
• Helps protect the auxiliary belt, tensioner, and alternator bearings.
• Provides an OE-quality fit for reliable replacement.

Symptoms Of Wear Or Failure:

• Excessive auxiliary belt vibration.
• Belt tensioner visibly bouncing or oscillating.
• Squeaking, chirping, rattling, or knocking from the belt area.
• Pulley failing to freewheel correctly.
• Pulley seized in both directions.
• Excessive pulley play or wobble.
• Roughness when rotating the pulley.
• Premature auxiliary belt wear.
• Unusual noises when the engine is switched off.
• Increased vibration at idle.
• Alternator bearing or tensioner wear associated with excessive belt loads.

Why Replacement Matters:

• The alternator freewheel pulley plays an important role in controlling vibration and rotational loads within the auxiliary drive system. Unlike a conventional fixed pulley, its overrunning mechanism allows the alternator rotor to continue rotating momentarily when engine speed drops rapidly. This prevents the alternator's rotational inertia from repeatedly pulling against the auxiliary belt.
• If the freewheel mechanism seizes, wears, or develops excessive play, increased vibration and shock loads can be transmitted through the belt system. This may cause accelerated wear of the auxiliary belt, tensioner, idler pulleys, and alternator bearings. A severely worn pulley can also affect belt tracking and potentially contribute to belt failure.
• Replacing a worn or faulty component with this Valeo Alternator Belt Pulley with Free Wheel Lock 99760315401/2 restores correct overrunning operation, reduces auxiliary belt vibration, and helps protect surrounding drive-system components. Manufactured to Valeo's high-quality standards, this pulley provides accurate fit, smooth operation, and dependable long-term performance for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99760315401

The product you are viewing cross references to these numbers

Starter Motor. 
Restore strong, dependable engine starting with this Valeo Starter Motor, manufactured as a direct replacement for 95860410900/1. Valeo is a recognised Original Equipment supplier of automotive electrical systems, producing high-quality starting components designed for accurate fit, correct electrical performance, and reliable long-term operation. The starter motor provides the high-torque rotational force required to crank the engine when the ignition or start system is activated, allowing the engine to reach the speed necessary for combustion and starting.

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16  

Diagram Ref No 1

During the starting process, the starter motor draws electrical power from the vehicle battery. Its solenoid engages the starter pinion with the engine's flywheel or flexplate ring gear, while the electric motor turns the engine crankshaft. Once the engine starts, the starter disengages from the ring gear. Engineered to withstand high electrical loads, repeated starting cycles, vibration, and demanding engine-bay temperatures, this Valeo unit is an ideal replacement for a slow, intermittent, noisy, or completely failed starter motor.

What This Product Does:

• Cranks the engine during the starting process.
• Converts battery electrical energy into mechanical rotation.
• Provides the torque required to turn the engine crankshaft.
• Engages with the flywheel or flexplate ring gear during starting.
• Supports fast and dependable engine starting.
• Disengages from the engine once starting is complete.
• Replaces a weak, intermittent, noisy, or failed starter motor.
• Provides an OE-quality fit and compatible electrical performance.

Symptoms Of Wear Or Failure:

• Engine failing to crank when attempting to start.
• Slow or laboured engine cranking.
• Intermittent starting problems.
• Clicking when attempting to start but the engine does not turn.
• Grinding or unusual noises during starting.
• Starter motor spinning without correctly engaging the engine.
• Engine requiring repeated attempts before starting.
• Starter remaining engaged after the engine has started.
• Burning smell or signs of excessive heat around the starter or wiring.
• Starting problems despite a correctly charged and serviceable battery.

Why Replacement Matters:

• The starter motor is essential for reliable vehicle operation because it provides the initial mechanical rotation required to start the engine. Internal wear to the motor, solenoid, brushes, bearings, or engagement mechanism can result in slow cranking, intermittent operation, unusual noises, or complete starting failure.
• A deteriorating starter can also place additional demand on the battery and electrical system. Problems with the pinion or engagement mechanism may cause grinding or improper engagement with the flywheel or flexplate ring gear, potentially causing additional mechanical wear if ignored.
• Replacing a worn or failed unit with this Valeo Starter Motor 95860410900/1 restores strong and consistent engine cranking, improves starting reliability, and helps maintain dependable operation of the starting system. Manufactured to Valeo's high-quality Original Equipment standards, this starter motor provides accurate fit, reliable electrical and mechanical performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860410900

The product you are viewing cross references to these numbers

Alternator.
Maintain dependable charging performance and a stable electrical supply with this Valeo Alternator. Valeo is a recognised Original Equipment supplier of automotive electrical systems, producing high-quality charging components designed for accurate fit, reliable electrical output, and long service life. The alternator generates electrical power while the engine is running, supplying the vehicle's electrical systems while maintaining the battery at the correct state of charge.

Fits:

Diagram Ref No 5

Driven by the engine through the auxiliary drive system, the alternator converts mechanical energy into electrical energy and regulates its output according to vehicle demand. This ensures essential systems including engine management, lighting, climate control, infotainment, safety equipment, and other electrical consumers receive the power required for correct operation. Engineered to provide dependable performance across varying engine speeds and electrical loads, this Valeo alternator is an ideal replacement for a weak, noisy, intermittent, or completely failed original unit.  

What This Product Does:

• Generates electrical power while the engine is running.
• Recharges and maintains the vehicle battery.
• Provides a stable electrical supply to vehicle systems.
• Supports engine management and other essential electronics.
• Powers lighting, climate control, infotainment, and electrical accessories.
• Regulates charging output according to vehicle electrical demand.
• Replaces a weak, intermittent, noisy, or failed alternator.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Battery or charging-system warning light illuminated.
• Battery repeatedly becoming discharged or going flat.
• Difficulty starting or slow engine cranking.
• Low, unstable, or irregular charging voltage.
• Headlights or interior lighting dimming or flickering.
• Electrical equipment operating intermittently or incorrectly.
• Charging-system warning messages or diagnostic fault codes.
• Whining, grinding, or rumbling noises from the alternator area.
• Burning smell or signs of excessive heat.
• Vehicle stalling as the battery becomes depleted.
• Complete loss of battery charging.
  
  

Why Replacement Matters:

• The alternator is a critical component of the vehicle's electrical and charging system. Once the engine is running, it supplies the electrical energy required by the vehicle while replenishing the battery after starting. If alternator output becomes insufficient or unstable, the battery can gradually discharge and sensitive electronic systems may no longer receive the consistent electrical supply required for correct operation.
• A deteriorating alternator can cause starting difficulties, charging warnings, flickering lights, intermittent electrical faults, and unreliable operation of vehicle electronics. If charging stops completely, the vehicle will continue operating only while sufficient battery energy remains, eventually resulting in the engine shutting down and being unable to restart.
• Mechanical problems within the alternator, including worn bearings or pulley-related faults, can also create excessive noise and potentially place additional strain on the auxiliary drive system.
• Replacing a worn or failed unit with this Valeo Alternator 976903024D/1 restores dependable battery charging, maintains stable electrical output, and supports reliable operation of the vehicle's electrical systems. Manufactured to Valeo's high-quality Original Equipment standards, this alternator provides accurate fit, dependable charging performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

976903024D

The product you are viewing cross references to these numbers

Alternator.
Maintain dependable charging performance and a stable electrical supply with this Valeo Alternator. Valeo is a recognised Original Equipment supplier of automotive electrical systems, producing high-quality charging components designed for accurate fit, reliable output, and long service life. The alternator generates electrical power while the engine is running, supplying the vehicle's electrical systems while maintaining the battery at the correct state of charge.

Fits:

• Porsche 976 Panamera V6 2.9L 2023>>
• Porsche 976 Panamera 4 V6 2.9L 2023>>  

Diagram Ref No 5

Driven by the engine through the auxiliary drive system, the alternator converts mechanical energy into electrical energy and regulates its output according to vehicle demand. This ensures that essential systems including engine management, lighting, climate control, infotainment, safety equipment, and other electrical consumers receive the power required for correct operation. Engineered for dependable performance across varying engine speeds and electrical loads, this Valeo alternator is an ideal replacement for a weak, noisy, intermittent, or failed original unit.  

What This Product Does:

• Generates electrical power while the engine is running.
• Recharges and maintains the vehicle battery.
• Provides a stable electrical supply to vehicle systems.
• Supports engine management and other essential electronics.
• Powers lighting, climate control, infotainment, and electrical accessories.
• Regulates charging output according to vehicle electrical demand.
• Replaces a weak, intermittent, noisy, or failed alternator.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Battery or charging-system warning light illuminated.
• Battery repeatedly becoming discharged or going flat.
• Difficulty starting or slow engine cranking.
• Low or unstable charging voltage.
• Headlights or interior lighting dimming or flickering.
• Electrical equipment operating intermittently or incorrectly.
• Charging-system warning messages or diagnostic fault codes.
• Whining, grinding, or rumbling noises from the alternator area.
• Burning smell or signs of excessive heat.
• Vehicle stalling as the battery becomes depleted.
• Complete loss of battery charging.

Why Replacement Matters:

• The alternator is a critical component of the vehicle's charging and electrical system. Once the engine is running, it supplies the electrical energy required by the vehicle while replenishing the battery after starting. If alternator output becomes insufficient or unstable, the battery can gradually discharge and sensitive electronic systems may no longer receive the consistent electrical supply required for correct operation.
• A deteriorating alternator can cause starting difficulties, warning lights, flickering illumination, intermittent electrical faults, and unreliable operation of vehicle electronics. If charging stops completely, the vehicle will continue operating only while sufficient battery energy remains, eventually resulting in the engine shutting down and being unable to restart.
• Mechanical problems within the alternator, including worn bearings or pulley-related faults, can also create excessive noise and potentially place additional strain on the auxiliary drive system.
• Replacing a worn or failed unit with this Valeo Alternator 976903024C/1 restores dependable battery charging, maintains stable electrical output, and supports reliable operation of the vehicle's electrical systems. Manufactured to Valeo's high-quality Original Equipment standards, this alternator provides accurate fit, dependable performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

976903024C

The product you are viewing cross references to these numbers

Alternator.
Restore reliable charging performance and maintain a stable electrical supply with this Valeo Alternator. Valeo is a recognised Original Equipment supplier of automotive electrical systems, producing high-quality charging components designed for accurate fit, dependable output, and long service life. The alternator generates electrical power while the engine is running, supplying the vehicle's electrical systems while keeping the battery correctly charged.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014

  
Diagram Ref No 6

Driven by the engine through the auxiliary belt system, the alternator converts mechanical energy into electrical energy. It supplies power to essential systems including engine management, lighting, climate control, infotainment, safety equipment, and other electrical consumers. Internal components such as the rotor, stator, bearings, rectifier, and voltage regulation system work together to provide a stable electrical output across varying engine speeds and electrical loads. This Valeo alternator is an ideal replacement for a weak, noisy, intermittent, or failed original unit.

What This Product Does:

• Generates electrical power while the engine is running.
• Recharges and maintains the vehicle battery.
• Supplies power to engine management and other essential electrical systems.
• Supports lighting, climate control, infotainment, and vehicle electronics.
• Helps maintain stable charging-system voltage.
• Provides electrical output according to vehicle demand.
• Replaces a weak, noisy, intermittent, or failed alternator.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Battery or charging-system warning light illuminated.
• Battery repeatedly becoming discharged or going flat.
• Difficulty starting or slow engine cranking.
• Headlights or interior lighting becoming dim or flickering.
• Electrical equipment operating intermittently or incorrectly.
• Low, unstable, or excessive charging voltage.
• Whining, grinding, or rumbling noises from the alternator area.
• Burning smell or signs of overheating.
• Vehicle stalling as battery charge becomes depleted.
• Charging-system diagnostic fault codes or warning messages.

Why Replacement Matters:

• The alternator is a critical component of the vehicle's charging and electrical system. While the engine is running, it supplies the electrical energy required by the vehicle and replenishes the battery after starting. A worn or failing alternator may produce insufficient or unstable electrical output, gradually discharging the battery and affecting the operation of sensitive vehicle electronics.
• As alternator performance deteriorates, the vehicle may develop starting problems, warning lights, flickering illumination, electrical malfunctions, or intermittent system faults. If the alternator stops charging completely, the vehicle will operate only until the remaining battery energy is exhausted, potentially resulting in the engine stalling and being unable to restart.
• Mechanical alternator faults, including worn bearings or pulley-related problems, can also create excessive noise and place additional strain on the auxiliary drive system if left unresolved.
• Replacing a worn or failed unit with this Valeo Alternator PAC903018/1 restores dependable battery charging, maintains a stable electrical supply, and supports reliable operation of the vehicle's electrical systems. Manufactured to Valeo's high-quality Original Equipment standards, this alternator provides accurate fit, dependable performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC903018

The product you are viewing cross references to these numbers

Front Wiper Blade Set, RHD.
Restore clear forward visibility and dependable wet-weather performance with this Valeo Front Wiper Blade Set for Right-Hand Drive (RHD) vehicles. Valeo is a recognised Original Equipment supplier of automotive visibility systems, producing high-quality wiper components designed for accurate fit, effective windscreen coverage, smooth operation, and dependable service life.

Fits:

• Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
• Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
• Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
• Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
• Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
• Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
• Porsche 9YA Cayenne Turbo V8 4.0L Petrol (550Hp) 2020-23
• Porsche 9YA Cayenne Coupe Turbo V8 4.0L Petrol (550Hp) 2019-23
• Porsche 9YA Cayenne Turbo S E-Hybrid V8 4.0L (550Hp) 2019-23
• Porsche 9YA Cayenne Coupe Turbo S E-Hybrid V8 4.0L (550Hp) 2020-23

  
Diagram Ref No 7

Designed specifically for right-hand-drive vehicles, this front wiper blade set provides the correct wiping pattern across the windscreen and driver's primary field of vision. The blades maintain consistent contact with the glass to efficiently remove rain, road spray, and surface water. High-quality wiping elements help minimise streaking, smearing, juddering, and unwanted noise, making this set an ideal replacement for routine servicing or worn and deteriorated original wiper blades.

What This Product Does:

• Clears rain, water, and road spray from the front windscreen.
• Maintains clear forward visibility during poor weather.
• Provides the correct wiping pattern for right-hand-drive vehicles.
• Maintains consistent contact across the windscreen.
• Helps minimise streaking, smearing, and unwiped areas.
• Supports smooth and quiet wiper operation.
• Restores effective windscreen clearing performance.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Streaks remaining across the windscreen after wiping.
• Smearing that reduces forward visibility.
• Unwiped or missed areas on the glass.
• Wiper blades juddering or skipping across the windscreen.
• Squeaking, chattering, or excessive noise during operation.
• Cracked, split, hardened, or deteriorated wiping rubber.
• Blade edges lifting away from the windscreen.
• Reduced visibility during rain or heavy road spray.
• Poor wiping performance even after cleaning the blades and windscreen.

Why Replacement Matters:

• Front wiper blades are essential safety components because they directly affect the driver's ability to see the road clearly during rain, road spray, and other adverse weather conditions. Exposure to UV radiation, temperature changes, dirt, road contaminants, and repeated operation gradually causes the wiping elements to harden, crack, distort, or lose consistent contact with the windscreen.
• Worn blades can leave streaks, smears, and unwiped areas that significantly reduce visibility. The problem can become particularly noticeable during heavy rain or night driving, when reflections and glare from headlights can make a poorly cleared windscreen more difficult to see through. Severely deteriorated blades may also expose harder sections of the blade assembly, potentially marking or damaging the glass.
• Replacing worn blades with this Valeo Front Wiper Blade Set, RHD 9Y2955329B/1 restores effective windscreen clearing, improves forward visibility, and supports safer driving in poor weather. Manufactured to Valeo's high-quality standards and designed specifically for right-hand-drive applications, this set provides accurate fit, smooth wiping performance, and dependable long-term service.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y2955329B

The product you are viewing cross references to these numbers

Wiper Blade Set, Front, LHD.
Restore clear forward visibility and dependable wet-weather performance with this Valeo Front Wiper Blade Set for Left-Hand Drive (LHD) vehicles. Valeo is a recognised Original Equipment supplier of automotive visibility systems, producing high-quality wiper components designed to provide accurate fit, consistent windscreen contact, quiet operation, and reliable long-term performance.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17 

 
Diagram Ref No 14

Designed specifically for left-hand-drive vehicles, this front wiper blade set provides the correct wiping pattern and coverage across the windscreen, particularly within the driver's primary field of vision. The blades maintain consistent contact with the glass to efficiently remove rain, road spray, and surface water. High-quality wiping elements help minimise streaking, smearing, juddering, and unwanted noise, making this set an ideal replacement during routine servicing or whenever the existing wiper blades have deteriorated.

What This Product Does:

• Clears rain, water, and road spray from the front windscreen.
• Maintains clear forward visibility during poor weather.
• Provides the correct wiping pattern for left-hand-drive vehicles.
• Maintains consistent contact across the windscreen.
• Helps minimise streaking, smearing, and unwiped areas.
• Supports smooth and quiet wiper operation.
• Restores effective windscreen clearing performance.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Streaks remaining across the windscreen after wiping.
• Smearing that reduces forward visibility.
• Unwiped or missed areas on the glass.
• Wiper blades juddering or skipping across the windscreen.
• Squeaking, chattering, or excessive noise during operation.
• Cracked, split, hardened, or deteriorated wiping rubber.
• Blade edges lifting away from the windscreen.
• Reduced visibility during rain or heavy road spray.
• Poor wiping performance even after cleaning the blades and windscreen.

Why Replacement Matters:

• Front wiper blades are essential safety components because they directly affect the driver's ability to clearly see the road during rain, spray, and other adverse weather conditions. Exposure to UV radiation, temperature changes, dirt, road contamination, and repeated operation gradually causes the wiping elements to harden, crack, distort, or lose consistent contact with the windscreen.
• Worn blades can leave streaks, smears, and unwiped areas that significantly reduce forward visibility. This can be particularly noticeable during heavy rain and night driving, when light from oncoming vehicles can create additional glare through a poorly cleared windscreen. Severely deteriorated blades may also expose harder parts of the blade assembly, potentially marking or damaging the glass.
• Replacing worn blades with this Valeo Front Wiper Blade Set, LHD V04015001HS/1 restores effective windscreen clearing, improves forward visibility, and supports safer driving in poor weather. Manufactured to Valeo's high-quality standards and designed specifically for left-hand-drive applications, this set provides accurate fit, smooth wiping performance, and dependable long-term service.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

V04015001HS

The product you are viewing cross references to these numbers

Rear Wiper Motor.
Restore dependable rear windscreen clearing and reliable wet-weather visibility with this Valeo Rear Wiper Motor. Valeo is a recognised Original Equipment supplier of automotive electrical and visibility systems, producing high-quality components designed for accurate fit, consistent operation, and long service life. This rear wiper motor provides the electrical drive required to operate the rear windscreen wiper smoothly and effectively, helping keep the glass clear of rain, road spray, and surface water.

Fits:

• Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
• Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
• Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
• Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
• Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
• Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
• Porsche 9YA Cayenne GTS V8 4.0L Petrol (460Hp) 2020-23
• Porsche 9YA Cayenne Coupe GTS V8 4.0L Petrol (460Hp) 2021-23
• Porsche 9YA Cayenne Turbo V8 4.0L Petrol (550Hp) 2020-23
• Porsche 9YA Cayenne Coupe Turbo V8 4.0L Petrol (550Hp) 2019-23
• Porsche 9YA Cayenne Turbo S E-Hybrid V8 4.0L (550Hp) 2019-23
• Porsche 9YA Cayenne Coupe Turbo S E-Hybrid V8 4.0L (550Hp) 2020-23
• Porsche 9YA Cayenne Coupe Turbo GT V8 4.0L (640Hp) 2021-23
• Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
• Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>
• Porsche 9YA.2 Cayenne E-Hybrid V6 3.0L (470Hp) 2023>>
• Porsche 9YA.2 Cayenne E-Hybrid Coupe V6 3.0L (470Hp) 2023>>
• Porsche 9YA.2 Cayenne S V8 4.0L Petrol (474Hp) 2023>>
• Porsche 9YA.2 Cayenne S Coupe V8 4.0L (474Hp) 2023>>
• Porsche 9YA.2 Cayenne S E-Hybrid V6 3.0L (519Hp) 2023>>
• Porsche 9YA.2 Cayenne S E-Hybrid Coupe V6 3.0L (519Hp) 2023>>
• Porsche 9YA.2 Cayenne Turbo E-Hybrid V8 4.0L (739Hp) 2023>>
• Porsche 9YA.2 Cayenne Turbo E-Hybrid Coupe V8 4.0L (739Hp) 2023>>
• Porsche 9YA.2 Cayenne Turbo E-Hybrid Coupe with GT Package V8 4.0 (739Hp) 2023>>
• Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
• Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
• Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
• Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
• Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
• Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
• Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23  

Diagram Ref No 1

When the rear wiper system is activated, the motor converts electrical energy into controlled mechanical movement, driving the rear wiper arm across the windscreen through its intended wiping cycle. It also supports the correct parking position of the wiper blade when the system is switched off. Engineered to withstand repeated operation, vibration, temperature changes, and demanding everyday driving conditions, this Valeo motor is an ideal replacement for a slow, intermittent, noisy, seized, or completely failed rear wiper motor.

What This Product Does:

• Powers the rear windscreen wiper system.
• Converts electrical energy into controlled mechanical movement.
• Drives the rear wiper arm through the correct wiping cycle.
• Helps clear rain, water, and road spray from the rear windscreen.
• Maintains clear rearward visibility during poor weather.
• Supports correct wiper parking when switched off.
• Replaces a weak, intermittent, seized, or failed rear wiper motor.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Rear wiper failing to operate.
• Intermittent or unpredictable wiper operation.
• Wiper moving more slowly than normal.
• Rear wiper stopping part-way across the glass.
• Wiper failing to return to its correct parked position.
• Grinding, clicking, buzzing, or unusual noises from the motor.
• Erratic or inconsistent wiper movement.
• Motor becoming excessively hot during operation.
• Wiper-related fuses repeatedly blowing.
• Reduced rearward visibility during wet weather.

Why Replacement Matters:

• The rear wiper motor is an important component of the vehicle's visibility system. Rain, road spray, dirt, and surface water can quickly accumulate on the rear windscreen, making it more difficult to clearly monitor surrounding traffic and road conditions. A correctly functioning rear wiper motor ensures the blade moves consistently across the glass when required.
• A deteriorating motor may operate slowly, intermittently, or noisily, and may eventually seize or stop working completely. Internal electrical or mechanical wear can also prevent the wiper from returning to its correct parked position. A struggling or seized motor may draw excessive electrical current, potentially causing blown fuses or placing additional strain on associated wiring and electrical components.
• Replacing a worn or faulty unit with this Valeo Rear Wiper Motor 9Y0955711A/1 restores smooth and dependable rear wiper operation, improves rearward visibility, and supports safe driving in poor weather conditions. Manufactured to Valeo's high-quality standards, this rear wiper motor provides accurate fit, dependable electrical and mechanical performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0955711A

The product you are viewing cross references to these numbers

Rear Wiper Motor. 
Restore dependable rear windscreen clearing and reliable wet-weather visibility with this Valeo Rear Wiper Motor. Valeo is a recognised Original Equipment supplier of automotive electrical and visibility systems, producing high-quality components designed for accurate fit, consistent operation, and long service life. This rear wiper motor provides the electrical drive required to operate the rear wiper smoothly, helping keep the rear windscreen clear of rain, road spray, and surface water.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21  

Diagram Ref No 1

When the rear wiper is activated, the motor converts electrical energy into controlled mechanical movement that drives the wiper arm across the rear windscreen. It works with the wiper mechanism to provide the correct wiping cycle and return the blade to its designated parked position when switched off. Engineered to withstand repeated operation, vibration, temperature changes, and everyday environmental exposure, this Valeo motor is an ideal replacement for a slow, intermittent, seized, noisy, or completely failed original unit.  

What This Product Does:

• Powers the rear windscreen wiper system.
• Converts electrical energy into controlled mechanical movement.
• Drives the rear wiper arm through its correct wiping cycle.
• Helps clear rain, water, and road spray from the rear windscreen.
• Maintains rearward visibility during poor weather conditions.
• Supports correct wiper parking when switched off.
• Replaces a weak, intermittent, seized, or failed rear wiper motor.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Rear wiper failing to operate.
• Intermittent or unpredictable wiper operation.
• Wiper moving more slowly than normal.
• Wiper stopping part-way across the rear windscreen.
• Wiper failing to return to its correct parked position.
• Grinding, clicking, or unusual noises from the motor.
• Erratic or inconsistent wiper movement.
• Motor becoming excessively hot during operation.
• Wiper-related fuses repeatedly blowing.
• Reduced rearward visibility during wet weather.

Why Replacement Matters:

• The rear wiper motor is an important part of the vehicle's visibility system, ensuring the rear windscreen can be cleared effectively during rain and when road spray or dirt accumulates on the glass. A weak or failed motor can prevent the wiper from operating correctly, reducing rearward visibility and making it more difficult to monitor surrounding vehicles and road conditions.
• A deteriorating motor may become slow, intermittent, noisy, or unable to park the wiper correctly. If the motor begins to seize, it can also draw excessive electrical current, potentially causing blown fuses or placing additional strain on the associated wiring and electrical system.
• Replacing a worn or faulty unit with this Valeo Rear Wiper Motor restores smooth and dependable rear wiper operation, improves rearward visibility, and supports reliable wet-weather driving. Manufactured to Valeo's high-quality standards, this rear wiper motor provides accurate fit, dependable electrical and mechanical performance, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B955711

The product you are viewing cross references to these numbers

Wiper Motor, Rear.
Restore dependable rear windscreen clearing with this Valeo Rear Wiper Motor. Valeo is a recognised Original Equipment supplier of automotive electrical and visibility systems, producing high-quality components designed for accurate fit, reliable operation, and long service life. The rear wiper motor provides the electrical drive required to operate the rear wiper mechanism, helping maintain clear rearward visibility during rain, road spray, and other poor weather conditions.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17  

Diagram Ref No 1

When the rear wiper is activated, the motor converts electrical energy from the vehicle into controlled mechanical movement that drives the wiper arm across the rear windscreen. Engineered to provide consistent speed and dependable operation, the motor works together with the wiper linkage, arm, and blade to clear water and contamination from the glass. Its robust construction is designed to withstand repeated use, vibration, temperature changes, and the demanding conditions encountered in everyday driving.  

What This Product Does:

• Powers the rear windscreen wiper system.
• Converts electrical energy into mechanical wiper movement.
• Drives the rear wiper arm through its correct wiping cycle.
• Helps clear rain, road spray, and water from the rear windscreen.
• Maintains rearward visibility in poor weather conditions.
• Supports consistent and reliable wiper operation.
• Replaces a weak, intermittent, seized, or failed rear wiper motor.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Rear wiper failing to operate.
• Wiper operating intermittently or unpredictably.
• Rear wiper moving unusually slowly.
• Wiper stopping part-way across the windscreen.
• Wiper failing to return to its normal parked position.
• Grinding, clicking, or unusual noises from the motor.
• Motor operating but the wiper arm failing to move correctly.
• Blown fuses associated with a seized or overloaded wiper motor.
• Rear visibility becoming difficult to maintain during wet weather.

Why Replacement Matters:

• The rear wiper motor is an important part of the vehicle's visibility system, particularly during rain and when road spray or dirt accumulates on the rear windscreen. A weak or failed motor can prevent the wiper blade from clearing the glass effectively, reducing rearward visibility and making it more difficult to monitor surrounding traffic and conditions.
• A deteriorating motor may also operate slowly, stop intermittently, fail to park correctly, or draw excessive electrical current. Continuing to operate a seized or struggling motor can potentially overload associated wiring, fuses, or other components within the wiper system.
• Replacing a faulty unit with this Valeo Rear Wiper Motor restores dependable wiper movement, improves rearward visibility, and supports safe driving in poor weather conditions. Manufactured to Valeo's high-quality standards, this rear wiper motor provides reliable electrical and mechanical performance, accurate fit, and long-term durability for Porsche maintenance and repair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958955711

The product you are viewing cross references to these numbers

Front Windscreen Wiper Blade Set, For Right-Hand Drive (RHD) Cars.
Restore clear forward visibility and dependable wet-weather performance with this Valeo Front Windscreen Wiper Blade Set for Right-Hand Drive (RHD) Cars. Valeo is a leading Original Equipment supplier of automotive visibility systems, producing high-quality wiper components designed to deliver accurate fit, effective screen coverage, smooth operation, and long service life.

Fits:

• Porsche 9J1.1 Taycan 2020-24
• Porsche 9J1.1 Taycan Sport Turismo 2020-24
• Porsche 9J1.1 Taycan 4 Cross Turismo 2020-24
• Porsche 9J1.1 Taycan 4S 2020-24
• Porsche 9J1.1 Taycan 4S Cross Turismo 2020-24
• Porsche 9J1.1 Taycan 4S Sport Turismo 2020-24
• Porsche 9J1.1 Taycan GTS 2020-24
• Porsche 9J1.1 Taycan GTS Sport Turismo 2020-24
• Porsche 9J1.1 Taycan Turbo 2020-24
• Porsche 9J1.1 Taycan Turbo Cross Turismo 2020-24
• Porsche 9J1.1 Taycan Turbo Sport Turismo 2020-24
• Porsche 9J1.1 Taycan Turbo S 2020-24
• Porsche 9J1.1 Taycan Turbo S Cross Turismo 2020-24
• Porsche 9J1.1 Taycan Turbo S Sport Turismo 2020-24
• Porsche 9J1.2 Taycan Sport Saloon 2024>>
• Porsche 9J1.2 Taycan Sport Turismo 2024>>
• Porsche 9J1.2 Taycan 4 Cross Turismo 2024>>
• Porsche 9J1.2 Taycan 4S Sport Saloon 2024>>
• Porsche 9J1.2 Taycan 4S Sport Turismo 2024>>
• Porsche 9J1.2 Taycan 4S Cross Turismo 2024>>
• Porsche 9J1.2 Taycan Turbo GT Sport Saloon 2024>>
• Porsche 9J1.2 Taycan Turbo GT with Weissach Package Sport Saloon 2024>>
• Porsche 9J1.2 Taycan Turbo Sport Saloon 2024>>
• Porsche 9J1.2 Taycan Turbo Sport Turismo 2024>>
• Porsche 9J1.2 Taycan Turbo Cross Turismo 2024>>
• Porsche 9J1.2 Taycan Turbo S Sport Saloon 2024>>
• Porsche 9J1.2 Taycan Turbo S Sport Turismo 2024>>
• Porsche 9J1.2 Taycan Turbo S Cross Turismo 2024>>  

Diagram Ref No 7

Specifically designed for right-hand-drive vehicles, this front wiper blade set provides the correct wiping pattern across the windscreen and driver's primary field of vision. The blades maintain consistent contact with the glass to efficiently remove rain, road spray, water, and light contamination. High-quality wiping elements help minimise streaking, smearing, juddering, and unwanted noise, making this set an ideal replacement during routine servicing or whenever the existing wiper blades have deteriorated.

What This Product Does:

• Clears rain, water, and road spray from the windscreen.
• Maintains clear forward visibility in poor weather conditions.
• Provides the correct wiping pattern for right-hand-drive vehicles.
• Maintains consistent contact across the windscreen.
• Helps minimise streaking, smearing, and missed areas.
• Supports smooth and quiet wiper operation.
• Restores effective windscreen clearing performance.
• Provides an OE-quality fit for straightforward replacement.

Symptoms Of Wear Or Failure:

• Streaks remaining across the windscreen.
• Smearing that reduces forward visibility.
• Unwiped or missed areas on the glass.
• Wiper blades juddering or skipping during operation.
• Squeaking, chattering, or excessive wiper noise.
• Cracked, split, hardened, or deteriorated wiping rubber.
• Wiper blade edges lifting away from the windscreen.
• Reduced visibility during rain or heavy road spray.
• Poor wiping performance even after cleaning the windscreen and blades.

Why Replacement Matters:

• Front windscreen wiper blades are essential safety components because they directly affect the driver's ability to see the road during rain, spray, and other adverse weather conditions. Exposure to UV light, temperature changes, dirt, road contaminants, and repeated use gradually causes the wiping elements to harden, crack, distort, or lose consistent contact with the glass.
• Worn blades can leave streaks and unwiped areas that significantly reduce visibility, particularly during heavy rain and night driving when glare from headlights can make a smeared windscreen especially difficult to see through. Severely deteriorated blades may also expose harder parts of the wiper assembly, potentially marking or damaging the windscreen.
• Replacing worn blades with this Valeo Front Windscreen Wiper Blade Set for Right-Hand Drive (RHD) Cars restores effective windscreen clearing, improves forward visibility, and supports safer driving in poor weather. Manufactured to Valeo's high-quality standards and designed specifically for RHD applications, this set provides accurate fit, dependable wiping performance, and long-term reliability for Porsche maintenance and routine servicing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9J1955425EY

The product you are viewing cross references to these numbers