Bumper Rear Seals

Rear bumper corner rubber. 



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref: 9

Please Select Below from 3 types
1. Left for 911 >> upto 1982
2. Left for 911 1983 >> onwards
3. Right for all 911's 1974-89

*Please note these fit 930 Turbo models upto 1982. for 930 Turbo models 1983-89 please
Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911505

The product you are viewing cross references to these numbers

Rear bumper corner rubber.
Also known as a rear bumper guard or bumper protection strip, it is mounted along the corner of the rear bumper to provide aesthetic and light impact protection. It acts as a protective rubber trim piece that attaches to the corner of the rear bumper, helping to prevent damage from light impacts, parking accidents, or everyday wear and tear.

Fits:
Porsche 911 1974 - 1989
Porsche 912 1976
Porsche 930 1978 - 1979

Diagram ref no. 9

The rear bumper protective trim enhances the aesthetic finish of the bumper while acting as a buffer against minor impacts. By absorbing small knocks and contact with objects such as shopping carts or low barriers, the strip helps protect the painted bumper surface underneath and maintain the classic exterior look.

Function:
•  Protects the rear bumper surface against minor knocks and abrasion
•  Complements the vehicle’s exterior styling with a period-correct trim piece
•  Maintains original bumper contours and bodyline appearance
•  Helps preserve resale value by reducing visible damage in a vulnerable area

Original bumper trim strips can become cracked, worn, faded, or missing over time due to age and environmental exposure. A damaged or missing trim strip not only detracts from the car’s appearance but also leaves the bumper more susceptible to scratches and dents. The replacement strips restore a factory-style finish and continue to provide a tangible protective function.

Replace this bumper trim if:
•  The original strip is cracked, faded, or torn
•  Trim no longer fits snugly to the bumper
•  Cosmetic restoration of the bumper area is underway
•  During bumper repair or repaint work

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911505

The product you are viewing cross references to these numbers

Rear Bumper Corner Rubber.



Fits:
Porsche 930 Turbo 1975-89

Click picture for large parts diagram.
Diagram ref: 9

Left or Right
Select below please

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9305050

The product you are viewing cross references to these numbers

Bumper Corner Rubber – Wide S-Type Version 

Restore the original appearance and protection of your classic Porsche 911 with this OE Match Rear Bumper Corner Rubber – Wide Version. Designed specifically for Porsche 911 models produced between 1965 and 1973, this high-quality replacement rubber trim fits the rear bumper corner sections and helps maintain the factory-correct finish of the iconic longhood bodywork.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

1. Wide Rubber Moudling 1965-68 Cars WITHOUT Reflectors - Longer Trim
2. Wide Rubber Moudling 1969-73 Cars WITH Reflectors - Shorter Trim

 As one of the most visible trim components on an early Porsche 911, the bumper corner rubber plays an important role in both aesthetics and protection. Over time, original rubber components can harden, crack, shrink or become damaged, detracting from the appearance of an otherwise well-maintained vehicle.

Manufactured to OE Match specifications, this wide-version bumper corner rubber provides the correct fit, profile and appearance required for restoration, repair and concours-level refurbishment projects.

What Does the Rear Bumper Corner Rubber Do?

The rear bumper corner rubber is fitted between the bumper sections and bodywork at the rear corners of the vehicle.

Its primary functions include:

• Providing a factory-finished appearance
• Protecting bumper edges
• Cushioning panel interfaces
• Reducing vibration between components
• Helping maintain correct bumper alignment
• Enhancing vehicle aesthetics
• Completing the original bumper assembly design

While often viewed as a cosmetic component, it also contributes to the overall integrity and fit of the bumper system.

Why Do Rear Bumper Corner Rubbers Fail?

Original rubber trim components are constantly exposed to environmental conditions.

Common causes of deterioration include:

• UV exposure
• Heat and temperature cycling
• Age-related hardening
• Ozone damage
• Moisture exposure
• Road contamination
• Minor impact damage
• Long-term compression

After decades of use, many original bumper rubbers lose their flexibility and no longer fit correctly.

Symptoms of Worn Rear Bumper Corner Rubbers

Common signs of deterioration include:

• Cracked rubber surfaces
• Shrinkage Hardening of the material
• Faded appearance
• Poor bumper fitment
• Gaps between body panels and bumper sections
• Distorted shape
• Missing sections of rubber trim

These issues can significantly affect the appearance of a classic Porsche restoration.

When Should the Rear Bumper Corner Rubber Be Replaced?

Replacement is recommended when:

• The original rubber has cracked
• Shrinkage is visible
• The material has hardened
• Bumper restoration work is being carried out
• Repainting the vehicle
• Restoring a Porsche 911 to factory condition
• Replacing damaged bumper components
• Completing a concours restoration

Many Porsche specialists replace all external rubber trim during a full body restoration to achieve the highest quality finish.

Why Replacement Matters

New bumper rubbers help restore the crisp appearance of the original Porsche body design.

Benefits include:

• Improved vehicle appearance
• Correct factory profile
• Better bumper fitment
• Reduced vibration
• Enhanced restoration quality
• Increased vehicle value
• Factory-correct presentation
• Long-term durability

For early Porsche 911 models, details such as bumper rubbers can make a significant difference to the final appearance of the vehicle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150504

The product you are viewing cross references to these numbers

Rear bumper end cap matt anodized.



Fits:
Porsche 911 1969-73 LWB CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150525

The product you are viewing cross references to these numbers

Rear bumper end cap.

Fits:
Porsche 911 1965-69 SWB

Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150525

The product you are viewing cross references to these numbers

Rear bumper end cap.



Fits:
Porsche 911 Carrera 2.7L 1973

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150525

The product you are viewing cross references to these numbers

REAR Bumper horn / over rider with rubber moulding.

Fits:
Porsche 911 2.0-2.4 01/63-07/73
Porsche 911 RS 2.7 08/72-07/73
Porsche 912 1.6 01/65-02/70

Fits: Left or Right. Price is for each.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503326

The product you are viewing cross references to these numbers

REAR Bumper over rider with rubber moulding - Special edition Matt Black
Sold as a pair

Fits:
Porsche 911 1965 to 1973
Porsche 911 RS 2.7 - 1972 to 1973
Porsche 912 1965 to 1970


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503326

The product you are viewing cross references to these numbers

Bumper guard for the rear bumper.
Cars WITHOUT Rubber



Fits:
Porsche 911 F (1965 - 1973)

Fits: Left or Right. Price is for each.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503322

The product you are viewing cross references to these numbers

Match Rear Bumper Horn / Over Rider - for cars without rubber buffer
Sold each - 2 required per car

Restore the original appearance of your classic Porsche with this OE Match Rear Bumper Horn / Over Rider, designed for the Porsche 911 (1965–1973). Manufactured to original equipment specifications, this premium replacement rear bumper horn provides the correct factory profile, high-quality finish and precise fitment for vehicles fitted with rear overriders without rubber buffers.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Diagram ref no 15

Perfect for concours restorations, accident repairs or replacing worn original bumper components, this OE Match bumper horn preserves the distinctive styling and authentic character of the early long-bonnet Porsche 911.

What Does the Rear Bumper Horn / Over Rider Do?

The rear bumper horn, also referred to as the bumper overrider, is mounted at each end of the rear bumper and performs both protective and cosmetic functions.

Its primary roles include:

• Providing additional protection during low-speed impacts.
• Helping protect the bumper from parking damage.
• Completing the factory rear bumper assembly.
• Enhancing the classic styling of the early Porsche 911.
• Supporting the original chrome bumper design.
• Maintaining the authentic appearance of restored vehicles.

Although primarily a styling feature, the bumper horn also helps absorb minor knocks before they reach the main bumper.

Why Do Rear Bumper Horns Fail?

After years of exposure, bumper horns commonly deteriorate due to:

• Minor parking impacts.
• Road accidents.
• Corrosion beneath damaged chrome plating.
• Stone chips and road debris.
• Moisture ingress.
• Age-related deterioration of the chrome finish.

Damaged bumper horns not only detract from the vehicle's appearance but can also reduce the effectiveness of the bumper assembly.

When Should the Rear Bumper Horn Be Replaced?

Replacement is recommended whenever you notice:

• Dents or distortion.
• Pitted or peeling chrome.
• Surface corrosion.
• Accident damage.
• Poor fitment or alignment.
• During complete bumper restoration or concours preparation.

Replacing worn bumper horns restores both the appearance and originality of your Porsche's rear bumper.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503322

The product you are viewing cross references to these numbers

Bumper guard for rubber buffer for the rear bumper on your classic 911. Chrome-plated. REAR.

Cars WITH Rubber. The rubber part is not included use part number 90150590322/1



Fits:
Porsche 911 F (1965 - 1973)

Fits: Left or Right. Price is for each.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503326

The product you are viewing cross references to these numbers

REAR Bump Porsche 911 1965-1968 2.0L / 912 SWB (F)Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  er Horn / Over Rider.
The OE Match Rear Bumper Horn / Over Rider is a high-quality replacement exterior trim component designed to restore the original appearance and protective function of the rear bumper on compatible classic Porsche models. Manufactured to OE specifications for fit, finish and durability, this over rider provides an authentic factory-style appearance while offering additional protection against minor knocks and parking impacts.  
Cars WITH Rubber - The rubber part is not included use part number 90150590322/1

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Manufactured from premium-quality materials with a durable, corrosion-resistant finish, the bumper horn is engineered to withstand everyday exposure to road debris, moisture, UV light and changing weather conditions. Ideal for restoration projects or replacing worn or damaged originals, it ensures precise fitment and preserves the classic styling of your Porsche.   

What This Product Does:

• Protects the rear bumper from minor impacts and parking damage.
• Helps absorb light contact during low-speed manoeuvres.
• Restores the original appearance of the rear bumper.
• Provides factory-style fitment and alignment.
• Enhances the overall finish of the vehicle's exterior.
• Helps protect surrounding bumper components.
• Replaces worn, damaged or corroded original over riders.
• Forms an integral part of the rear bumper assembly.

Symptoms Of Wear Or Failure:

• Dents or impact damage.
• Corrosion or rust.
• Pitting or deterioration of the surface finish.
• Scratches or cosmetic damage.
• Loose or misaligned fitment.
• Cracked or distorted mounting points.
• Faded appearance due to age or weather exposure.
• Missing bumper over rider.
• Poor panel alignment around the bumper.
• Reduced protection against minor impacts.

Why Replacement Matters:

• Rear bumper over riders are continually exposed to minor impacts, road debris, moisture, road salt and UV exposure. Over time, they can become dented, corroded or damaged, affecting both the appearance and protective function of the bumper assembly.
• A damaged or poorly fitted over rider can detract from the vehicle's originality, reduce protection against low-speed impacts and affect the alignment of the bumper assembly. For classic Porsche restoration projects, maintaining correct bumper trim is essential for preserving the vehicle's authentic appearance and value.
• Replacing a worn or damaged rear bumper horn with an OE Match component restores the original styling, fit and protection of the rear bumper. Manufactured to factory-style specifications, it provides excellent durability, precise fitment and a high-quality finish, making it the ideal choice for restoration, repair and long-term preservation of your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503326

The product you are viewing cross references to these numbers

Rear Bumper Horn/ Overider Rubber.

The OE Match Rear Bumper Horn / Over Rider Rubber is a premium-quality replacement rubber insert designed to restore the protective function and original appearance of the rear bumper over rider on compatible classic Porsche models. Manufactured to OE specifications for fit, profile and durability, this rubber component provides a factory-style finish while helping absorb minor impacts and protecting the bumper from everyday knocks and scuffs.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F) 

Manufactured from high-quality automotive-grade rubber, the over rider insert is resistant to UV exposure, moisture, ozone and temperature extremes. Its durable construction helps maintain flexibility and appearance over time, making it an ideal replacement for cracked, hardened or deteriorated original rubber inserts during restoration or repair work.

What This Product Does:

• Provides a protective rubber insert for the rear bumper over rider.
• Helps absorb minor impacts during low-speed manoeuvres.
• Protects the bumper from scratches and scuffs.
• Restores the original appearance of the rear bumper assembly.
• Improves the finish of classic Porsche exterior trim.
• Fits directly into the original bumper horn / over rider.
• Resists weathering, UV exposure and road contaminants.
• Forms an integral part of the rear bumper protection system.

Symptoms Of Wear Or Failure:

• Cracked or split rubber.
• Hardened or brittle material.
• Fading or discolouration.
• Missing sections of rubber.
• Loose fit within the bumper over rider.
• Surface deterioration caused by UV exposure.
• Damage from minor impacts or parking knocks.
• Water ingress behind the rubber insert.
• Poor cosmetic appearance of the bumper.
• Reduced protection against minor contact.

Why Replacement Matters:

• Rear bumper over rider rubbers are continuously exposed to sunlight, moisture, road salt, temperature changes and everyday contact during parking and manoeuvring. Over time, the rubber can harden, crack, shrink or deteriorate, reducing both its protective properties and the appearance of the bumper.
• A damaged or missing rubber insert leaves the bumper more vulnerable to scratches and minor impact damage while detracting from the vehicle's original styling. On classic Porsche models, replacing deteriorated trim components is an important part of maintaining authenticity and overall vehicle value.
• Replacing the rear bumper horn / over rider rubber restores the original appearance and protective function of the bumper assembly. The OE Match replacement provides factory-style fitment, durable automotive-grade rubber and long-lasting weather resistance, helping preserve the appearance, protection and classic character of your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150590322

The product you are viewing cross references to these numbers

Rear bumper over rider. Rubber.



Fits:
Porsche 911 1974-83

Click 'Zoom in' for large parts diagram.
Diagram Ref: 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150534

The product you are viewing cross references to these numbers

Rear Bumper Over Rider Rubber.

The OE MATCH Rear Bumper Over Rider Rubber is a high-quality replacement pair of bumper over rider rubbers designed for classic Porsche rear bumpers. Mounted to the rear bumper over riders, these rubber inserts provide additional protection against minor impacts, parking knocks, and everyday wear while maintaining the vehicle's original factory appearance.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC  

Diagram Ref No 21

Manufactured to OE specifications, these over rider rubbers offer precise fitment, durable construction, and an authentic period-correct finish. They are ideal for restoration projects or replacing cracked, faded, or damaged originals, helping preserve both the appearance and functionality of the rear bumper assembly.

What This Product Does:

• Provides protective cushioning for rear bumper over riders
• Helps absorb minor impacts and parking contact
• Protects bumper surfaces from scuffs and damage
• Maintains the original appearance of the rear bumper assembly
• Enhances the visual finish of the vehicle's rear end
• Supports accurate restoration of classic Porsche models

Symptoms Of Wear Or Failure:

• Cracks, splits, or perishing of the rubber surface
• Fading, discolouration, or weathering
• Loose or detached bumper rubbers
• Scuffs, tears, or impact damage
• Warping or distortion of the rubber profile
• Missing sections of protective material
• Reduced impact protection capability
• Aged or deteriorated rear bumper appearance

Why Replacement Matters:

• Restores original factory styling and finish
• Provides renewed protection against minor impacts and scuffs
• Improves the appearance of the rear bumper assembly
• Helps prevent further cosmetic bumper damage
• Maintains proper fitment and alignment of bumper components
• Supports concours-quality restorations and refurbishment projects
• Enhances vehicle presentation and value
• Provides durable OE-quality protection and long-term reliability

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150534

The product you are viewing cross references to these numbers