Torsion Bar
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-13
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-13BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-13H
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-14
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-14BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-14H
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-15
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-15BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-15H
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-16
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-16BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-16H
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 1965-73
Click 'Zoom in' for large parts diagram.
Diagram ref no 34
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315301
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989
Click 'Zoom in' for large parts diagram.
Diagram ref no 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134147500
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
SET OF 2
Fits:
Porsche 911/912 1965-73
Porsche 914
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPF0142-
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 356B 1959-63
Sold each.
Fits:
Porsche 911/911 S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 912 1965-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134376300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold each.
Fits:
Porsche 911/911 S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 912 1965-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134376300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911/911 S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 912 1965-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134371301
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911/911 S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 912 1965-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134371301
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- 21mm
- 22mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1S166911F
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 87-89 G50 Gearbox cars - Rear
Available in 5 sizes:
- 27mm
- 29mm
- 30mm
- 31mm
- 33mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1S166911TR
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 65-86 Rear
Available in 6 sizes:
- 26mm
- 27mm
- 28mm
- 29mm
- 31mm
- 33mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Centre less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1S166911R
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
209202
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold per kit, 1 kit req'd per car.
Fits:
for G50 Transmission
Porsche 911 / 930 1987-89
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21021
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21020
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 911 Carrera 72-86
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133101002GRV
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 Turbo 1978-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033101002GRV
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 (mod. 901) 2.0L-2.4L 08/1968-07/1973
Fitting Position: Left Front
Fitting Position: Right Front
Panel Type: Inner-wing Panel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1682351000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 2.0-3.0 01/63-07/77
Porsche 912 1.6 01/65-02/70
Click 'Zoom in' for large parts diagram.
Diagram Ref No 32
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133110700
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 911 2.0-3.0 01/63-07/77
Porsche 912 1.6 01/65-02/70
Click 'Zoom in' for large parts diagram.
Diagram Ref No 32
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133110700
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 911 1965-89
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911/911S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 911 T/S 1970-73
Porsche 911 E 1970-73
Porsche 911 CARRERA 2.7L 1970-73
Porsche 912 1965-69
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 34
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134310
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134103702
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134103702
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-73 Left or Right Side
Porsche 911 1974>> Right Side only
Porsche 911 (930) Turbo 1975-89 Right Side only
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134115900
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-73 Left or Right Side
Porsche 911 1974>> Right Side only
Porsche 911 (930) Turbo 1975-89 Right Side only
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134115900
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Grommet for stabiliser bar, front, Ø13mm
(need 2 per car).
Fits:
Porsche 911/912 1965-67
Porsche 911/912 1968 USA
Click 'Zoom in' to display fitment diagram - Ref No 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379201
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Grommet for stabiliser bar, front, Ø13mm
(need 2 per car).
Fits:
Porsche 911/912 1965-67
Porsche 911/912 1968 USA
Click 'Zoom in' to display fitment diagram.
Diagram ref no 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379201
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold each, (need 2 per car).
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Click 'Zoom in' to display fitment diagram - Ref No 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134379202
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Anti Roll Bar
- Anti Roll Bar Bushes
- Anti Roll Bar Bracket
- Ball Joints
- Drop Links & Bushes FRONT
- Drop Links & Bushes REAR
- Shock Absorbers FRONT
- Shock Absorber Parts FRONT
- Shock Absorbers REAR
- Shock Absorber Parts REAR
- Track Control Arms FRONT
- Track Control Arm REAR
- Wheel Bearings & Kits
- Wishbones & bushes
- Spring Plate
- Rear Trailing Arm
- Cross Member & Parts
- Wheel Hub / Carrier
- SuperPro Polyurethane Bushes
- Powerflex Heritage Collection
- Powerflex Black Series Bushes
- Powerflex Polyurethane Bushes