Boots / Rear Lid / Locks and Latches

Rear engine lid, STEEL
This OE Match rear engine lid is a direct replacement for Porsche part number 91151290302GRV, manufactured to original specifications for accurate fitment and restoration quality. It is designed for Porsche 911 and 912 models from 1967 to 1973.

Fits:
Porsche 911 Carrera 1969 - 1973 (not Turbo)

This product supersedes Porsche's old part numbers:  91151290302

Constructed from high-quality steel, this panel replicates the factory design, including correct contours and mounting points, ensuring compatibility with original components.

As part of the rear bodywork, the lid integrates with factory hinges, latch mechanisms, and grille assemblies. Steel versions were commonly fitted to standard models, offering durability and long-term strength, while still maintaining the classic appearance.

The engine lid protects the engine compartment from external elements while allowing airflow through the grille to support cooling. It also forms a key structural and visual element of the iconic Porsche 911 rear design.

Function
• Covers and protects the engine compartment
•  Allows airflow for engine cooling
•  Maintains rear body structure and alignment
•  Preserves original factory styling

Original engine lids are prone to rust, corrosion, and damage over time. Incorrect or poorly fitting panels can affect alignment, cooling airflow, and overall vehicle appearance. Replacing with a correct OE Match steel lid restores proper fitment, ensures durability, and maintains the original look—especially important for classic Porsche restoration.

When to replace:
•  Rust, corrosion, or structural damage
•  Poor panel alignment or fitment
•  Incorrect or non-original lid fitted
•  Damage from rear impact
•  During full restoration or repaint

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151290302GRV

The product you are viewing cross references to these numbers

Engine lid, REAR, with hole for license plate lamp



Fits:
Porsche 911 2.0L-2.4L 08/1967-12/1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151290302GRV

The product you are viewing cross references to these numbers

Very high grade chrome grille for early 911 with twin bars in the centre.

Fits:
Porsche 911 (2.0) 01/63-07/67
Porsche 912 (1.6) 01/65-02/70
Can also be fitted to newer models

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155904121

The product you are viewing cross references to these numbers

Rear lid complete lock assembly.

Fits:
Porsche 911 1965-89
Porsche 930 3.0L / 3.3L 1975-89

Diagram ref no 14 and 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93051205999

The product you are viewing cross references to these numbers

Rear lid release cable.

Fits:
Porsche 911 1965-89
Porsche 911 (930) Turbo 1978-89
Porsche 964 1989-94

911 Coupe FRONT 2.0-2.4 08/69-07/73
911 FRONT 2.7-3.3 08/73-07/89
911 FRONT 2.0 01/63-07/69
911 REAR 2.0-3.3 01/63-07/89
964 REAR 3.6 07/89-07/90

This product supersedes Porsche's old part numbers:
- 90151107320

Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151107321

The product you are viewing cross references to these numbers

Rear lid release cable.

Fits:
Porsche 911 1965-89
Porsche 911 (930) Turbo 1978-89
Porsche 964 1989-94

911 Coupe FRONT 2.0-2.4 08/69-07/73
911 FRONT 2.7-3.3 08/73-07/89
911 FRONT 2.0 01/63-07/69
911 REAR 2.0-3.3 01/63-07/89
964 REAR 3.6 07/89-07/90

This product supersedes Porsche's old part numbers:
- 90151107320

Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151107321

The product you are viewing cross references to these numbers

Rear lid, aluminium.



Fits:
Porsche 911 F model 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151201000

The product you are viewing cross references to these numbers

Rear lid, steel.



Fits:
Porsche 911 F model 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151201056

The product you are viewing cross references to these numbers

Rennline titanium 911R style engine lid hinge set. 



Fits:
Porsche 911 - 1964 to 1989

Save weight and add style to your 911 with our 911R Decklid Hinge

The only titanium 911R decklid hinge on the market, this hinge is guaranteed to be the lightest and most durable option available.

Product Description

Convert your standard 911 decklid to the 911R “Flip over” style with our 911R inspired titanium decklid hinges. 
This kit includes a unique backing piece that forms to the contour of your decklid for a simple, easy installation. 

• Titanium Design
• Stainless Steel Hardware
• Unique Backing bracket to support third mounting hole on engine lid (decklid)
• Does not work with decklid struts
• Quick release Clevis Pin

Please Note:
Requires drilling to car as well as the engine lid (decklid)
Fitment on aftermarket engine lids is not guaranteed

Spoiler Rubber. The Lid is not included.



Fits:
Porsche 911 1984-89 (not Turbo)
It will fit any car fitted with Carrera Tail Spoiler

Click picture for large parts diagram.
Diagram Ref: 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115120910101C

The product you are viewing cross references to these numbers

Rubber stop for front bonnet / rear lid.


Porsche 911 2.0-3.3 1965-89
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76


Porsche 911 2.0-3.3 1965-73
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970303650

The product you are viewing cross references to these numbers

Rubber washer for grille fastening screw. Sold each.



Fits:
Porsche 911 / 912 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151179121

The product you are viewing cross references to these numbers

Smuggler's Box Cover Seal for Left Hand Drive Cars Only



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150449102

The product you are viewing cross references to these numbers

Smuggler's box cover seal for Left Hand Drive Cars Only
This OE Match smuggler’s box cover seal is a replacement rubber sealing strip used on left-hand drive Porsche 911 models. It fits around the smuggler’s box cover panel in the front luggage compartment, helping seal the cover correctly against the body.  

Fits:
Porsche 911 1965 - 1989

Diagram ref no 22

The smuggler’s box cover seal helps close the gap between the cover and the surrounding body panel. It prevents water, dust, dirt, and road debris from entering the compartment area and helps reduce vibration or rattling from the cover panel.

Functions
•  Seals the smuggler’s box cover in the front luggage compartment
•  Helps prevent water, dust, and dirt entering the compartment
•  Reduces cover panel vibration and rattling
•  Provides a clean OE-style finish around the cover edge
•  Helps protect components housed in or near the smuggler’s box area
•  Replaces worn, cracked, flattened, or missing original seals
•  Suitable for restoration, bodywork repair, or front trunk refurbishment

Why Replace This Part?
Original rubber seals can harden, shrink, split, flatten, or perish with age. A damaged or missing smuggler’s box cover seal may allow moisture and dirt into the compartment and can make the cover sit poorly or rattle. Replacing the seal helps restore the correct factory-style fit, improves protection, and gives the front luggage area a cleaner finished appearance.

When to replace:
•  The original seal is cracked, brittle, flattened, or missing
•  Water, dust, or dirt is entering the smuggler’s box area
•  The cover panel rattles or does not sit correctly
•  The front luggage compartment is being restored
•  The smuggler’s box cover has been removed or replaced
•  The vehicle is undergoing bodywork, repainting, or seal replacement
•  You want to restore the correct OE-style front trunk finish

Where it fits on the car
This seal fits around the smuggler’s box cover panel in the front luggage compartment of left-hand drive Porsche 911 models. The smuggler’s box is located under the front trunk floor area and houses or protects various vehicle components depending on model year and specification.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150449102

The product you are viewing cross references to these numbers

Spring for bonnet lock, upper.



Fits:
Porsche 911 2.0-2.7 01/63-07/73
Porsche 912 1.6 01/65-02/70

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151151220

The product you are viewing cross references to these numbers

Spring for bonnet lock, upper.

Fits:
Porsche 911 2.0-2.7 01/1963 - 07/1973
Porsche 912 1.6 01/1965 - 02/1970


Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151151220

The product you are viewing cross references to these numbers