Door Panels | Hinges | Striker Plates

Special production door exterior panel made from extra thin sheet metal for the Porsche 911 RS 2.7L 1972-73 models



Fits:
Porsche 911 Carrera RS 2.7L 1972-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153102

The product you are viewing cross references to these numbers
PLEASE NOTE:
Due to its size, weight or fragility, this item requires additional protective packaging to make sure it reaches you undamaged. A small packing surcharge is applied to cover these specialist materials and the extra care taken preparing your order for transit.

Door glass frame in chrome with vent window.



Fits:
Porsche 911 Targa 2.0-2.7 08/69-07/76

POSTING GLASS & WINDSCREENS
Although we take great care in packaging glass, we cannot offer insurance to cover breakage.
Therefore, we advise customers that they purchase glass by mail order at their own risk.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154200

The product you are viewing cross references to these numbers

Door Hinge Bolt. M 8 x 20. Six required per door and twelve per car.



Fits:
Porsche 911 1972-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90007508503

The product you are viewing cross references to these numbers

Door Hinge Bolt. M 8 x 16. Six required per door and twelve per car.

Fits:
Porsche 911/912 1965-69 Chassis no: F0301555>>, F0350245>> and F0450941>>
Porsche 911 1970-71

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0147074

The product you are viewing cross references to these numbers

Made to the original design multi tooth, knurled, hardened, white galvanised. 12 bolts & 12 washers

Fits:
Porsche 911/912 1965-69 Chassis no: F0301555>>, F0350245>> and F0450941>>
Porsche 911 1970-71

Diagram ref no 6 & 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0147074

The product you are viewing cross references to these numbers

Door hinge bush. Four required for each door. Price shown is for each.



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153131121

The product you are viewing cross references to these numbers

Door Hinge Bush.
The OE Match Door Hinge Bush is a replacement bush for the door hinge assembly on classic Porsche 911, 912, 930, 964 and 993 models.
x4 Required For Each Door.
Price Shown Is For Each.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97  

Diagram Ref No 6

Located within the door hinge pivot assembly, the bush supports the hinge pin and provides the correct bearing surface as the door opens and closes. Over time, repeated door movement and the weight of the door can wear the original bushes, creating excessive clearance between the hinge pin and hinge.

Replacing worn hinge bushes helps restore smooth door movement, reduce unwanted play and maintain correct door alignment. This OE Match component is ideal for routine hinge refurbishment, correcting wear or restoring an older Porsche.

What This Product Does:
The door hinge bush provides a close-fitting surface between the hinge and hinge pin. It allows the hinge to pivot smoothly while keeping the door securely positioned relative to the body.

Its functions include:

• Supporting the door hinge pin
• Providing a smooth hinge pivot point
• Controlling excessive movement within the hinge
• Helping maintain correct door alignment
• Supporting consistent panel gaps
• Reducing hinge-related rattles and movement
• Helping the door open and close smoothly
• Reducing direct wear between hinge components

Because Porsche doors are relatively heavy, even a small amount of wear in the hinge bushes can become noticeable at the outer edge of the door.

Symptoms Of Wear Or Failure:
Door hinge bushes gradually wear through repeated opening and closing of the door. Common signs of worn bushes include:

• Door dropping or sagging when opened
• Excessive vertical movement when lifting the open door
• Play or looseness at the door hinge
• Door requiring lifting or extra force to close
• Misaligned or uneven panel gaps
• Door catching against the striker or bodywork
• Clunking, clicking or rattling from the hinge area
• Creaking or rough movement when opening or closing
• Difficulty achieving correct door alignment
• Increased wind or water noise caused by poor door positioning
• Visible wear around the hinge pin and bush
• Door movement when driving over uneven surfaces

Worn hinge pins can produce similar symptoms, so the pins and hinges should also be inspected when replacing the bushes.

Why Replacement Matters:

• A worn door hinge bush allows additional movement between the hinge and hinge pin. Because the door places considerable load on the hinge assembly, this small amount of clearance can result in noticeable door sag and poor alignment.
• Continued operation with worn bushes can place additional stress on the hinge pins, hinges, door latch and striker. The door may also need to be slammed or lifted to close correctly, increasing wear on surrounding components.
• Poor door alignment can additionally affect weather sealing and panel gaps and, in severe cases, may allow the door edge to contact adjacent bodywork.
• Replacing worn bushes restores the correct hinge pivot clearance, helping the door remain properly supported and allowing it to open and close smoothly. When significant wear is present, replacing the hinge pins and bushes together can provide a more complete hinge refurbishment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153131121

The product you are viewing cross references to these numbers

Repair piece for door hinge pillar, UPPER SECTION



Fits:
Porsche 911 2.0L-3.3L 01/63-07/83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115010

The product you are viewing cross references to these numbers

Door hinge piller (A POST). Replica of the original old panel.



Fits:
Porsche 911 01/1965 - 07/1983

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115010

The product you are viewing cross references to these numbers

Door Hinge Pin. Two per door. Price shown is for each.

Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76
Porsche 964 1989-94
Porsche 993 1995-98

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153130520

The product you are viewing cross references to these numbers

Door hinge pin.
It is a direct-fit replacement pin used in the door hinge assembly on a variety of classic Porsche models, providing a solid pivot point that allows the door to open and close smoothly and accurately.
Two per door. Price shown is for each.

Fits:
Porsche 911/912/930 1965 - 1989
Porsche 914 1970 - 1976
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998

Diagram ref no 5

The door hinge pin serves as the pivot point within the door hinge mechanism. It allows the door to swing open and close smoothly while supporting the weight of the door and maintaining proper alignment between the door and body. A worn or damaged hinge pin can cause: Door sag,  Misalignment,  Uneven shut lines,  Noise or binding during movement. Installing a new hinge pin restores the correct pivot geometry and helps the door operate as intended by Porsche’s original design.

•   Acts as the rotational pivot between the door and hinge bracket
•   Maintains stable, consistent door movement
•   Helps preserve correct door alignment and shut line
•   Reduces wear on surrounding hinge components

Over decades of use, hinge pins and their mating bushings can wear, allowing the door to develop play, sag, or uneven gaps. This can make doors harder to close cleanly, lead to premature wear on latches and striker plates, and negatively impact body panel fitment and appearance.

Replace the door hinge pin if:
•  Door feels loose or sagging
•  Door edges don’t align evenly with body
•  Noise or binding during opening/closing
•  During hinge disassembly or body restoration
•  Bushings are worn and pins show wear or ovality

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153130520

The product you are viewing cross references to these numbers

Door hinge plate / pad.
Genuine Porsche Original Equipment (OE) door lock striker plate - the metal latch receiver that provides the secure engagement point for the door catch on classic Porsche models. It is a factory-specified replacement part designed to meet Porsche’s original fit, strength, and finish standards.
Sold each, 4 required per vehicle.

Fits:
Porsche 911/912/930 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998

Diagram ref no 8

It installs on the door jamb and serves as the fixed anchor point that the door latch grabs onto when the door is closed, ensuring precise alignment, secure closure, and consistent fitment.

The door lock striker plate provides a solid engagement surface for the door latch. When the door is closed, the latch mechanism on the door hooks over the striker, allowing the door to remain securely shut while driving. This part ensures a precise lock and release action and is essential for proper door alignment, secure closure, and cabin sealing.

Installed on the door pillar/jamb upright, the striker plate:
• Provides the fixed engagement point for the door latch
•  Ensures consistent door closing feel and secure lockup
•  Maintains correct panel alignment and gap
•  Works with the factory latch, striker bolt, and reinforcement bracket.
Precise positioning and strength help prevent door misalignment, wind noise, and rattling while maintaining manufacturer-specified tolerances.

The striker plate experiences direct mechanical engagement with the door latch every time the door is opened or closed. Over time, repeated use can cause wear, deformation, or loosening of the striker surface - leading to doors that don’t close cleanly, rattle, or fail to latch properly. A worn striker can also cause accelerated wear in the latch mechanism itself. Replacing a worn or damaged striker plate with a Genuine Porsche OE part restores secure door engagement, eliminates play and noise, and supports correct body panel alignment and sealing.

When to replace:
• Door fails to latch securely
• Noticeable play, rattling, or loose fit in door closure
• Visible wear, deformation, or corrosion on striker surface
• During restoration or door body repair
• After latch mechanism replacement

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153139120

The product you are viewing cross references to these numbers

Door hinge plate / pad, Tin.
The striker plate provides a solid, fixed engagement surface for the door latch. When the door is closed, the latch hooks securely onto the striker, keeping the door firmly shut and aligned with the body.
Sold each, 4 required per vehicle.

Fits:
Porsche 911 2.0-3.3L 01/1963 - 07/1989
Porsche 912 1.6L 01/1965 - 02/1970
Porsche 964 3.3-3.6L 12/1988 - 06/1994
Porsche 993 3.6-3.8L 10/1993 - 09/1997

Diagram ref no 8

It mounts to the door pillar/jamb and serves as the receiver for the door latch mechanism, allowing the door to close firmly and remain securely locked during driving.

It is an ideal solution for repairs, restorations, or replacement of worn, damaged, or corroded original striker plates.

Function:
Installed on the door pillar/jamb, this striker plate:
• Ensures secure door closure and latch engagement
• Maintains proper door alignment and shut lines
• Helps eliminate door rattle and wind noise
• Works in conjunction with the original latch and locking mechanism.
Accurate positioning and durable construction help preserve smooth door operation and consistent closing feel.

A worn or deformed striker plate can lead to poor door closure, rattling, misalignment, or unreliable latching, which may also accelerate wear on the door latch itself. Replacing the striker with an OE Match component restores proper latch engagement, improves door feel, and helps maintain correct body alignment and sealing.

When to replace:
• Door does not close or latch cleanly
• Excessive play, rattling, or vibration when driving
•  Visible wear, corrosion, or deformation
•  During door latch or body repair
•  As part of a classic Porsche restoration

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153139120

The product you are viewing cross references to these numbers

Door hinge with loose pin to fit both left and right Porsche 911 01/1963-07/1973



Fits:
Porsche 911  01/1963-07/1973

Click 'Zoom in' for large parts diagram.
Diagram ref no 2, 7, 5 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153103120

The product you are viewing cross references to these numbers

Door Hinge. You will need two for each door. Price shown is for each.



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153130321

The product you are viewing cross references to these numbers

Door jam lock piller / B post. LEFT



Fits:
Porsche 911 LWB 06/1968-89

Please note that the area around the rear deck lid pull is different on 66-69 model

Click 'Zoom in' for large parts diagram.
Diagram ref no 22.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150204104

The product you are viewing cross references to these numbers