Engine Tinware

This OE Match engine baffle plate fits the front-right or rear-left position on selected Porsche 911 F, 911 G and 914/6 models. It forms part of the engine air-guide and cover assembly that controls cooling airflow around the air-cooled engine. 
Sold each

Fits
Porsche 911 F (1965 - 1973)
Porsche 911 G (1974 - 1977)
Porsche 914/6 (1970 - 1972)

What This Product Does

The plate helps contain and direct fan-driven air around the engine. Correctly installed tinware reduces gaps through which cooling air could escape or warm engine-bay air could recirculate.

Functions

• Guides cooling air around the engine assembly
• Closes the specified right-front or left-rear area
• Supports the intended arrangement of the engine tinware
• Helps limit cooling-air leakage through panel gaps
• Provides a replacement for missing, damaged or corroded tinware

Technical Details

• Component type: engine baffle plate or air deflector
• Position: Front Right / Rear Left
• Diagram ref no 20

Symptoms of Fault

• Corrosion, cracks or distortion in the existing plate
• Loose tinware producing rattles or vibration
• Visible gaps between adjoining engine panels
• Missing fixings or poor panel alignment
• Higher or uneven engine temperature behaviour
• Heat affecting nearby parts because airflow is misdirected

Why Replacement Matters

Air-cooled engines depend on correctly positioned tinware to send cooling air where intended. Replacing a missing, distorted or deteriorated baffle helps restore the original panel layout and cooling-air path. Inspect adjoining seals, clips and fasteners during installation, as worn supporting parts may prevent accurate alignment.

FAQs

• Is this baffle only cosmetic?
  No. It is a functional part of the engine airflow-control system.
• Can damaged or missing tinware affect cooling?
  Yes. Gaps may allow cooling air to escape or heated air to circulate back around the engine.
• What should be inspected during fitting?
  Check the adjoining panels, seals, fixings and alignment, ensuring there is no contact with the fan, belts or ducting.
• How many are used on one vehicle?
  Two are required per car, covering the front-right and rear-left positions. Each plate is supplied individually.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110603901

The product you are viewing cross references to these numbers

Centre engine baffle plate by OE Match for the Porsche 911, 912 and 914 applications detailed below. Four plates are required per car; Sold each.

Fits

• Porsche 911 F (1965 - 1973)
• Porsche 911 G (1974 - 1977)
• Porsche 911 Turbo (1975 - 1977)
• Porsche 914/6 (1970 - 1972)
  
  

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram reference: 18.

What This Product Does

This centre plate forms part of the engine's cooling-air baffle arrangement. It helps guide fan-driven air around the air-cooled engine rather than allowing it to escape through gaps in the intended airflow path.

Functions

• Guides cooling air through the engine's baffle arrangement.
• Replaces a missing or damaged centre-position plate.
• Supports reinstatement of the cooling-air layout during engine restoration or rebuilding.
  
  

Technical Details

• Part reference: 90110603501.
• Brand: OE Match.
• Position: Centre.
• Required quantity: four per car; supplied individually, not as a four-piece set.
  
  

Symptoms of Fault

• Visible corrosion, holes, cracking or distortion in the existing plate.
• Rattling associated with loose tinware or damaged fixing points.
• Missing or poorly aligned panels leaving gaps in the cooling-air arrangement.
• Abnormally high or uneven engine temperatures requiring investigation of the complete cooling system.
  
  

Why Replacement Matters

Renewing a deteriorated or absent baffle helps restore the intended cooling-air route. During engine work, inspect the surrounding panels, retaining hardware and alignment as well: replacing one plate will not correct gaps or damage elsewhere. OE Match focuses on Porsche replacement applications, with specification checks and sample evaluation forming part of its development process.

FAQs

Is this plate decorative?
No. It is a functional part of the engine's airflow-control arrangement.

How many should I order?
Four are specified per car. Each plate is supplied separately, so check how many existing plates need renewal.

What should be checked during fitting?
Inspect adjoining tinware, relevant seals and fasteners. Confirm alignment and clearance from nearby moving components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110603501

The product you are viewing cross references to these numbers

Engine Baffle - 4 required per car
Sold each

Fits:
Porsche 911 Carrera 3.0ltr - 1976 to 1977
Porsche 911 - 1978 to 1989
Porsche 911 turbo 1975 to 1977
Porsche 964 turbo - 1991 to 1993

Diagram Ref No 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010602300

The product you are viewing cross references to these numbers

Engine Baffle - 4 required per car

Sold each

Fits:
Porsche 911 Carrera 3.0ltr - 1976 to 1977
Porsche 911 - 1978 to 1989
Porsche 911 turbo 1975 to 1977
Porsche 964 turbo - 1991 to 1993

Diagram Ref No 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010602300

The product you are viewing cross references to these numbers

Engine baffle.

 

Fits:
Porsche 911 1974-83

Click 'Zoom in' for large parts diagram.
Diagram ref no 15.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010622100

The product you are viewing cross references to these numbers

Engine baffle.

 
Fits:
Porsche 911 1974-83

Diagram ref no 15.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010622100

The product you are viewing cross references to these numbers

Engine baffle.

Fits:
Porsche 911 1974 - 1983

Diagram Ref No 16.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010622200

The product you are viewing cross references to these numbers

Engine baffle.

 
Fits:
Porsche 911 1974-83

Diagram Ref No 16.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010622200

The product you are viewing cross references to these numbers

Engine cover for timing belt front, left

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110608104

The product you are viewing cross references to these numbers

Front engine tin left.

Made from fiber cloth with a special resin, which gets the authentic amber colouring after impact of engine heat.

Fits:
Porsche 911 1974-83

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK210Q1

The product you are viewing cross references to these numbers

Front engine tin right

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Fits:
Porsche 911 (1965-1983)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 12

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK210P1

The product you are viewing cross references to these numbers

Engine Cover Left (none hole type)

Fits:
Porsche 911 1974 - 1983

Diagram Ref No 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110685300

The product you are viewing cross references to these numbers

Engine cover, non hole type. 
Engine Cover / Panel is a high-quality replacement part designed to replicate the original Porsche factory part in fit, shape, and function. This engine cover panel is designed as a direct replacement for Porsche part 91110685300. Engineered for classic air-cooled Porsche 911 models, it restores proper engine bay protection and structural integrity.

* Please note: Some Porsche 911's use the left panel with hole product code 90110682500, for 911's without the hole use product code 91110685300

Fits:
Porsche 911 1974 -1983

Diagram Ref No 8

The engine cover panel helps shield engine bay components from debris, moisture, and excessive heat while supporting correct airflow and layout within the engine compartment. It ensures the engine bay remains properly protected and structured for reliable operation.

Function:
•  Protects engine components from dirt and environmental exposure
•  Supports proper airflow and thermal management
•  Restores correct engine bay structure and coverage
•   Helps maintain long-term engine reliability

Damaged or deteriorated engine covers can allow heat and debris to impact sensitive engine components. Replacing them with a quality OE Match component restores protection, airflow management, and proper fit.

When to replace:
•  Cracked, warped, or damaged engine cover
•  Heat-related degradation or aging
•  Missing or incorrectly fitted panel
•  During engine bay refurbishment or restoration
•  When restoring proper airflow and protection

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110685300

The product you are viewing cross references to these numbers

Rear engine tin.

Fits:
Porsche 911 1969-83

Made from fiber cloth with a special resin, which gets the authentic amber colouring after impact of engine heat.

Diagram Ref No 15

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK210G2

The product you are viewing cross references to these numbers

Engine cover tin ware. FRONT RIGHT.

Fits:
Porsche 911 1965-83
Porsche 911 (930) Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram Ref No 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110680204

The product you are viewing cross references to these numbers

This OE Match Front Right engine cover tinware panel replaces the corresponding section of the cooling-air enclosure on the listed classic Porsche applications. It is intended for repairs, engine rebuilds and restoration work involving damaged or missing tinware.

Fits

• Porsche 911 1965-83
• Porsche 911 (930) Turbo 1975-77 
  
  

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram reference no: 13

What This Product Does

The panel forms part of the engine's airflow-management enclosure. Working with adjacent covers and sealing components, it helps keep cooling air on its intended path rather than allowing it to escape through an open or damaged section.

Functions

• Closes the Front Right section of the engine tinware assembly.
• Supports the intended routing of engine cooling air.
• Helps maintain separation between cooler incoming air and heated air around the engine.
  
  

Technical Details

• Brand: OE Match.
• Part reference: 91110680204.
• Related supplied reference: 91110680200.
• Installation position: Front Right.
• Internal diagram identification includes SC, /R and /R/V annotations.
  
  

Symptoms of Fault

• Visible rust perforation, cracks or distortion.
• Loose-panel rattling or vibration.
• Gaps around adjoining panels or seals.
• Unusually high oil or cylinder-head temperatures requiring investigation.
  
  

Temperature changes can have several causes; inspect the complete cooling-air enclosure before attributing them to one panel.

Why Replacement Matters

A missing, damaged or incorrectly seated panel can leave openings that disturb airflow. Renewing defective tinware helps restore the enclosure's intended layout during repair or restoration. Inspect neighbouring panels, seals, mounting points and fasteners at the same time, as a replacement panel alone will not correct damage elsewhere.

FAQs

• Is this panel only decorative?
  No. Engine tinware has an airflow-control role as well as forming part of the engine compartment's appearance.
• What should be checked during installation?
  Check panel alignment, surrounding seals and fixings, and clearance from the fan, belts and ducting.
• How should I confirm the correct version?
  Compare the supplied references, vehicle details and Front Right position with the component being removed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110680204

The product you are viewing cross references to these numbers