SPORTS Brake Disc

Brake Disc / Rotor Slotted 2-pc FRONT.
SET OF 2




Fits:
This is a 350mm Upgrade with spacers & hardware for the following cars
Porsche 718 Boxster S / GTS
Porsche 718 Cayman S / GTS
Porsche 991.2 C2 / C4 / T
Porsche 992 C2 / C4 / T - use S rear pad for full sweep

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

Sold/priced in pairs.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 Turbo with Ceramic Brakes (PCCB)

Porsche 997 Turbo Without Ceramic
Porsche 997 C2 / C2S / C4S with Ceramic Brakes (PCCB)
Porsche 997.2 C2 with Ceramic Brakes (PCCB)
Porsche 987 Cayman S with Ceramic Brakes (PCCB)
Porsche 991.1 C2S with Ceramic Brakes (PCCB)
Porsche 991 C4S with Ceramic Brakes (PCCB)
Porsche 981 Boxster S with Ceramic Brakes (PCCB)
Porsche 981 Cayman S with Ceramic Brakes (PCCB)
Porsche 718 Boxster S / GTS with Ceramic Brakes (PCCB)
Porsche 718 Cayman S / GTS with Ceramic Brakes (PCCB)
Porsche 991.2 C2S / C4S / GTS
Porsche 992 C2S / C4S


Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This discs will fit cars with the Ceramic option from factory.

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
This is a 350mm Upgrade with spacers & hardware
Porsche 997.2 C2 / C4
Porsche 991.1 C2 / C4
Porsche 981 Boxster S
Porsche 981 Cayman S
Porsche 718 Cayman 2.0L
Porsche 718 Boxster 2.0L
Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Porsche 987 Cayman S with PCCB
Porsche 981 Cayman S with PCCB
Porsche 981 Boxster S with PCCB
Porsche 981 Spyder with PCCB
Porsche 982 Boxster GTS 2.5 with PCCB
Porsche 982C Cayman GTS 2.5 with PCCB
Porsche 982 Boxster GTS 4.0 with PCCB
Porsche 982C Cayman GTS 4.0 with PCCB

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
This is a 325mm Upgrade with spacers & hardware for the following cars
Porsche 981 Boxster / S
Porsche 981 Cayman / S
Porsche 718 Boxster / S
Porsche 718 Cayman / S

Kit Contains:
Brake Disc 325MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

Zimmermann Black Coat Z Brake disc rotor - Front

Internally Vented, Slotted
Surface: Coated
Outer diameter: 330mm
Brake Disc Thickness: 34mm
Bolt Hole Circle Ø: 130mm
Centering Diameter: 98mm
Weight: 10.5kg
Hole Pitch / Number: 7/5


Porsche 996 turbo - 2001 to 2005
Porsche 996 C4S - 2001 to 2005
Porsche 997 C4S - 2005 to 2008
Porsche 997 C2S - 2005 to 2008
Porsche 997 MKII C4S - 2009 to 2012
Porsche 997 MKII C2S - 2009 to 2012
Porsche 991.2 C2 / C4 - 2016 to 2019
Porsche 991.2 C2S / C4S - 2016 to 2019
Porsche 992.1 C2 / C4 - 2019 to 2024
Porsche 718 Boxster S / GTS 2.5ltr - 2017 Onwards
Porsche 718 Cayman S / GTS 2.5ltr - 2017 Onwards

The Zimmermann Black:Z brake disc was developed by combining expertise from production brake discs with insights gained through motorsport, particularly in the VLN racing series. Featuring a unique groove pattern protected by a utility model, the Black:Z offers an optimal alternative to the perforated Sport:Z disc.

Engineered to deliver the high braking performance demanded in racing, this disc also excels in everyday road use. Like all Zimmermann products, it is manufactured exclusively from premium-quality cast materials.

The result speaks for itself, with the VLN racing team praising its performance: “The disc is amazing!”

Approved for both road and track use, the Zimmermann Black:Z is a versatile, high-performance solution for discerning drivers.

Your advantages: 

• Faster brake response due to optimized water drainage
• Better wet braking performance
• Utility model protected groove pattern ensures optimal heat dissipation and thus improved braking performance
• Brake fading is avoided
• Cooler look Better appearance thanks to anti-corrosion coating Coat Z+
• Better grip and faster brake response through constant sharpening of the pads
• Replacement of the original disc 1:1 possible
• ECE R90 approved

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9963514

The product you are viewing cross references to these numbers

Zimmermann Black Coat Z Brake disc rotor - Front

Internally Vented, Slotted
Surface: Coated
Outer diameter: 330mm
Brake Disc Thickness: 28mm
Bolt Hole Circle Ø: 130mm
Centering Diameter: 98mm


Porsche 997 C2 3.6ltr MKII - 2009 to 2012
Porsche 997 C4 3.6ltr MKII - 2009 to 2012
Porsche 991.1 C2 3.4ltr - 2012 to 2016
Porsche 991.1 C4 3.4ltr - 2012 to 2016 
Porsche 981 Boxster S 3.4ltr - 2012 to 2016
Porsche 981C Cayman S 3.4ltr 201 to 2016
Porsche 718 (982) Boxster 2.0ltr 2017>> 
Porsche 718C (982C) Cayman 2.0ltr 2017>> 

The Zimmermann Black:Z brake disc was developed by combining expertise from production brake discs with insights gained through motorsport, particularly in the VLN racing series. Featuring a unique groove pattern protected by a utility model, the Black:Z offers an optimal alternative to the perforated Sport:Z disc.

Engineered to deliver the high braking performance demanded in racing, this disc also excels in everyday road use. Like all Zimmermann products, it is manufactured exclusively from premium-quality cast materials.

The result speaks for itself, with the VLN racing team praising its performance: “The disc is amazing!”

Approved for both road and track use, the Zimmermann Black:Z is a versatile, high-performance solution for discerning drivers.

Your advantages: 

• Faster brake response due to optimized water drainage
• Better wet braking performance
• Utility model protected groove pattern ensures optimal heat dissipation and thus improved braking performance
• Brake fading is avoided
• Cooler look Better appearance thanks to anti-corrosion coating Coat Z+
• Better grip and faster brake response through constant sharpening of the pads
• Replacement of the original disc 1:1 possible
• ECE R90 approved

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735140

The product you are viewing cross references to these numbers

Zimmermann FORMULA Z brake disc.

Vented, Perforated, Two-piece floating brake disc, Coated
Outer diameter: 380 mm
Brake Disc Thickness: 34 mm


Not for cars with ceramic brake (PCCB)
Porsche 982SP Boxster Spyder 2019>> - FRONT
Porsche 981 Cayman GT4 2016 - FRONT
Porsche 982 Cayman GT4 2019>> - FRONT

The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.

Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98135140

The product you are viewing cross references to these numbers

FRONT Zimmermann FORMULA Z brake disc. 350mm X 34mm

Vented, Perforated, Two-piece floating brake disc, Coated
Outer diameter: 350 mm
Brake Disc Thickness: 34 mm

• Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
• Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 992.1 Carrera 2S 3.0L 2019-24
• Porsche 992.1 Carrera 4S 3.0L 2019-24
• Porsche 992.1 Carrera 2S Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4S Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4S 3.0L 2020-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
• Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp)

The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.

Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P161530

The product you are viewing cross references to these numbers

Zimmermann FORMULA Z brake disc.

Vented, Perforated, Two-piece floating brake disc, Coated
Outer diameter: 380 mm
Brake Disc Thickness: 30 mm


Not for cars with ceramic brake (PCCB)
Porsche 982SP (718) Boxster Spyder 2019>> - REAR
Porsche 982 (718) Cayman GT4 2019>> - REAR

Porsche 992.1 Carrera GTS - REAR
Porsche 992.1 Carrera 4 GTS - REAR
Porsche 992.1 turbo - REAR

The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.

Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT61560

The product you are viewing cross references to these numbers

DesignTek Carbon Ceramic Front Brake Discs For Porsche 982 Boxster / Cayman GTS.
Sold as a pair

Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm

Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.

Fits:
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)

Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution. 

Product Features:

• Carbon ceramic construction for high heat tolerance and fade-resistant braking
• Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
• Lightweight design reduces unsprung and rotating mass for quicker response
• Exceptional thermal stability and wear resistance
• Designed for use with OE and compatible aftermarket calipers
• Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
• Ideal for high-performance road use and track performance driving

Important Fitment & Usage Notes:

• Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
• Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
• Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
• Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040082GCF

The product you are viewing cross references to these numbers

DesignTek Carbon Ceramic Front Brake Discs For Porsche 982 Boxster Spyder / Cayman GT4.
Sold as a pair

Brake Disc Ø: 380mm
Brake Disc Thickness: 34 mm

Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.

Fits:
Porsche Boxster Spyder 718 4.0L (420 Bhp)
Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L  

Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution. 

Product Features:

• Carbon ceramic construction for high heat tolerance and fade-resistant braking
• Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
• Lightweight design reduces unsprung and rotating mass for quicker response
• Exceptional thermal stability and wear resistance
• Designed for use with OE and compatible aftermarket calipers
• Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
• Ideal for high-performance road use and track performance driving

Important Fitment & Usage Notes:

• Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
• Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
• Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
• Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040082SCF

The product you are viewing cross references to these numbers

DesignTek Carbon Ceramic Rear Brake Discs For Porsche 982 Boxster / Cayman GTS.
Sold as a pair

Brake Disc Ø: 350mm
Brake Disc Thickness: 28 mm

Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.

Fits:
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)

Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution. 

Product Features:

• Carbon ceramic construction for high heat tolerance and fade-resistant braking
• Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
• Lightweight design reduces unsprung and rotating mass for quicker response
• Exceptional thermal stability and wear resistance
• Designed for use with OE and compatible aftermarket calipers
• Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
• Ideal for high-performance road use and track performance driving

Important Fitment & Usage Notes:

• Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
• Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
• Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
• Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040082GCR

The product you are viewing cross references to these numbers

DesignTek Front Brake Pads For Carbon Ceramic Brake Discs. Porsche 982 Boxster / Cayman / 991 / 981C

DesignTek Carbon Ceramic Front Brake Pads are engineered specifically for use with carbon ceramic brake discs, delivering consistent, fade-resistant braking performance for both high-performance road driving and track use.

Unlike conventional brake pads designed for iron discs, these pads use a carbon-ceramic-compatible friction compound that operates effectively across a wide temperature range without damaging the disc surface. The result is strong, progressive braking feel, excellent modulation, and stable performance under repeated heavy braking.

Ideal for drivers seeking a refined street braking experience with the durability and performance required for spirited or track-focused driving, DesignTek brake pads offer a reliable OE-replacement solution for Porsche carbon ceramic braking systems.

Fits:
Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Boxster Spyder 718 4.0L (420 Bhp)
Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
Porsche Cayman S / GTS 3.4L 981 2013-16
Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L  

Key Features:

• Specifically formulated for carbon ceramic brake discs
• Suitable for street and track use
• Excellent fade resistance at elevated temperatures
• Consistent friction characteristics across the full operating range
• Progressive pedal feel and strong initial bite
• Low dust output compared to conventional iron-disc pads
• Designed for use with OE and compatible aftermarket calipers
• Both Street and Race Pads are ECE R90 E11 Certified, ensuring no compliance issues

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040099065

The product you are viewing cross references to these numbers