Eurowise

Eurowise EWORRMAC textured black rock sliders for Porsche Macan models equipped with air suspension. Supplied as a pair, they provide steel protection for the vehicle’s sill and rocker areas during light trail driving and more demanding off-road use.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21

What This Product Does

These vehicle-specific sliders run beneath both sides of the Macan, helping to shield vulnerable lower body sections when travelling over rocks, uneven ground and other obstacles. The bolt-on construction can be removed again, making the installation fully reversible.

Functions

• Adds steel protection to both sill areas
• Helps deflect contact from rocks and uneven terrain
• Supports mild through to heavy off-road use
• Provides protection on the left and right sides
• Uses a removable bolt-on mounting arrangement

Technical Details

• Manufacturer: Eurowise
• Construction: 1.5in OD steel tubing
• Tube wall thickness: 0.095in
• Finish: textured black powder coating
• Contents: two rock sliders and one fitting hardware kit

Installation Notes

Fitting requires removal of the left- and right-hand plastic underbody covers, which are not refitted. The manufacturer’s procedure uses supplied L-bolts, M12 nutserts, M12 bolts, washers and serrated nuts. An M12 nutsert tool is required and is not included. Professional installation is recommended if the correct tools and experience are unavailable.

FAQs

• Are sliders supplied for both sides?
  Yes. The package contains a matched pair for the left- and right-hand sides.
• Is fitting hardware supplied?
  Yes. A mounting hardware kit is included.
• Does installation require welding?
  No. Eurowise specifies a bolt-on installation using the supplied mounting components.
• Can the sliders be removed later?
  Yes. The manufacturer describes the mounting design as fully reversible.
• What material is used?
  The sliders are fabricated from steel tubing with a 1.5in outside diameter and 0.095in wall thickness.

Eurowise textured black rock slider set for Porsche 95B.1 and 95B.2 Macan models with steel suspension springs. Fabricated in-house from steel, these sliders provide additional lower-body protection for Macans used in mild to demanding off-road conditions.

Fits

• Porsche Macan 95B.1 MK1 2014–18
• Porsche 95B.1 Macan 2.0L Petrol 2014–18
• Porsche 95B.1 Macan S 3.0L V6 Petrol 2014–18
• Porsche 95B.1 Macan S 3.0L V6 Diesel 2014–18
• Porsche 95B.1 Macan GTS 3.0L V6 Petrol 2014–18
• Porsche 95B.1 Macan Turbo 3.6L V6 2014–18
• Porsche Macan 95B.2 MK2 2019–21
• Porsche 95B.2 Macan 2.0L Petrol 2019–21
• Porsche 95B.2 Macan S 3.0L V6 Petrol 2019–21
• Porsche 95B.2 Macan GTS 2.9L V6 Petrol 2019–21
• Porsche 95B.2 Macan Turbo 2.9L V6 2019–21

What This Product Does

The rock sliders run along the lower sides of the vehicle to help shield the sill and rocker areas from contact with rocks, uneven terrain and other off-road obstacles. Their vehicle-specific, bolt-on construction allows them to be removed again without permanently altering their intended function.

Functions

• Adds steel protection along both sides of the vehicle
• Helps reduce exposure of the lower bodywork to off-road impacts
• Supports Macan builds intended for mild or more demanding off-road use
• Uses a reversible bolt-on installation
• Provides matched left-hand and right-hand protection

Technical Details

• Manufacturer: Eurowise
• Construction: 1.5in outside-diameter steel tube with a 0.095in wall
• Finish: textured black powder coating for weather resistance
• Installation: reversible bolt-on design
• Contents: two rock sliders, one left and one right, plus mounting hardware
  
  

FAQs

• Are both sides supplied?
  Yes. The set contains one left-hand and one right-hand rock slider.
• Is mounting hardware included?
  Yes. A mounting hardware kit is supplied with the sliders.
• Does installation permanently modify the product's fitting arrangement?
  The manufacturer describes the design as fully reversible and bolt-on.
• What type of use are these sliders intended for?
  They are designed to provide protection for Porsche Macans used in mild to demanding off-road conditions.

The Eurowise Transmission Oil Cooler Upgrade Kit is designed for the Porsche 958 Cayenne where increased transmission cooling is required. Intended for demanding operating conditions, it provides a bolt-on auxiliary cooling arrangement using a high-capacity cooler, dedicated mounting hardware, hoses and a machined adapter.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17

What This Product Does

This kit increases transmission oil cooling and fluid capacity to help manage heat when the Cayenne is used for heavy towing, slow and steep off-road driving, rock crawling or operation in hot climates. Eurowise states that the system provides twice the factory cooling and fluid capacity without introducing a pressure drop.

Functions

• Increases transmission oil cooling capacity
• Adds fluid capacity to the transmission cooling circuit
• Helps manage heat during towing and demanding off-road use
• Connects the transmission circuit to a high-capacity cooler using AN hoses
• Avoids tapping or modifying the original oil lines
• Retains compatibility with factory sensors and adaptive cruise control equipment

Technical Details

• Manufacturer: Eurowise Off Road
• Proprietary CNC-machined oil-cooler adapter
• Stainless-steel mounting brackets
• Installs behind the radiator shutter on applicable vehicles
• Bolt-on installation without cutting or custom fabrication

Why Upgrade

The standard transmission cooling system may have difficulty controlling oil temperature when the vehicle is exposed to sustained load, restricted airflow or high ambient temperatures. This upgrade adds a larger cooling arrangement while avoiding invasive modification of the factory lines. The purpose-made adapter and supplied hose assembly provide a direct connection between the transmission oil circuit and the additional cooler.

Kit Contents

• 1 x transmission oil cooler
• 1 x oil-cooler mount
• 1 x oil-cooler hose kit
• 1 x oil-cooler adapter

Installation Note

A Cayenne equipped with a winch requires a custom winch fairlead to accommodate the winch and transmission oil cooler together. Confirm this requirement before installation if a winch is already fitted or planned.

FAQs

• Does installation require cutting? No. Eurowise describes the kit as a bolt-on system that does not require cutting or custom fitting.
• Are the original transmission lines tapped? No. The supplied machined adapter allows the AN hose circuit to be connected without tapping the factory lines.
• Will it interfere with adaptive cruise control? The mounting arrangement is designed to avoid interference with factory sensors and features such as adaptive cruise control.
• Is additional hardware supplied? The kit includes the cooler, mount, hose assembly and adapter required for the cooling upgrade.

The Eurowise front Baja light bar is a vehicle-specific auxiliary-light mounting bar for the Porsche 95B Macan models. Its tubular steel construction provides four dedicated positions for fitting forward-facing lights and gives the vehicle a more purposeful off-road appearance.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
• Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
• Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>

What This Product Does

This bar creates a secure mounting location for auxiliary LED lighting at the front of the Macan. It uses model-specific brackets attached around the factory crash-bar mounting area, avoiding structural alterations to the front of the vehicle.

Functions

• Provides four evenly spaced brackets for auxiliary lights
• Supports additional forward lighting for night-time and off-road driving
• Uses custom vehicle-specific mounting brackets
• Adds a tubular off-road detail to the front of the Macan

Technical Details

• Manufacturer: Eurowise Off Road
• Construction: steel tubing
• Tube size: 1.5-inch outside diameter
• Tube wall thickness: 0.120 inch
• Light-bracket spacing: 7.5 inches
• Four light mounting positions

Kit Contents

• One Porsche Macan Baja light bar
• Two custom mounting brackets
• Two polyurethane light-bar plugs

Installation Information

Installation requires removal of the front bumper, undertray and associated trim to access the factory crash-bar fixings. The supplied brackets are installed using the relevant crash-bar mounting points. Eurowise advises that some clearancing may be necessary and that bumper flaps require trimming for full clearance. Electrical connectors and a sensor must also be repositioned as described in the installation instructions. Professional installation is recommended.

Measure the intended lights before installation to confirm compatibility with the stated 7.5-inch distance between the mounting brackets.

Important Information

This bar is designed solely to support auxiliary lighting. It must not be used as a recovery point or for pulling the vehicle.

FAQs

• How many lights can the bar support? Four evenly spaced mounting brackets are provided for compatible auxiliary lights.
• What is the distance between the light brackets? Eurowise specifies a spacing of 7.5 inches. Measure each light before fitting.
• Does installation require structural modification? No alteration to the front structure is specified, although bumper-flap trimming and some clearancing may be required.
• Must the bumper be removed? Yes. The installation procedure requires removal of the front bumper and related trim.
• Can it be used for vehicle recovery? No. The light bar is not designed to withstand recovery or pulling loads.

The Eurowise front auxiliary light mounting bar is made for the Porsche Macan. Its steel-tube construction provides four mounting positions for additional LED lights while adding an off-road-inspired element to the front of the vehicle.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
• Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
• Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>

What This Product Does

This vehicle-specific bar provides a dedicated location for fitting forward-facing auxiliary lighting. It attaches using custom brackets supplied with the kit, creating a secure installation without requiring structural alterations to the front of the Macan.

Functions

• Provides four brackets for mounting auxiliary lights
• Supports additional forward lighting for night-time or off-road use
• Uses vehicle-specific mounting hardware
• Adds a rugged visual detail to the front of the Macan

Technical Details

• Manufacturer: Eurowise Off Road
• Construction: steel tubing
• Tube specification: 1.5-inch outside diameter with a 0.120-inch wall
• Light mounting positions: four evenly spaced brackets
• Distance between light brackets: 7.5 inches
• Kit contents: one light bar, two custom mounting brackets and two polyurethane plugs

Installation Information

The bar is secured through the supplied brackets using the factory crash-bar mounting area. Installation involves removing the front bumper and associated trim. Eurowise notes in its fitting instructions that some clearancing and trimming of bumper flaps may be necessary, although the vehicle's front structure does not require modification. Professional installation is recommended.

Why Replacement Matters

A model-specific mounting bar provides a more controlled solution than improvised brackets for auxiliary lighting. Measure the intended lights before installation to confirm that their dimensions are suitable for the 7.5-inch spacing between the mounting positions.

Important Information

This light bar is intended only as a mounting support for auxiliary lighting. It must not be used as a recovery point or for pulling the vehicle.

FAQs

• What components are supplied? The kit contains one steel light bar, two custom mounting brackets and two polyurethane end plugs.
• How far apart are the light brackets? The stated spacing between the mounting brackets is 7.5 inches. Measure the proposed lights to verify compatibility.
• Does fitting require bumper removal? Yes. The Eurowise installation procedure includes removing the front bumper and related trim to reach the mounting area.
• Is trimming required? The fitting guide notes that some clearancing and trimming of bumper flaps may be needed.
• Can the bar be used for vehicle recovery? No. It is an auxiliary-light support and is not designed to withstand recovery loads.

The Eurowise front bull light bar is designed for Porsche 95B.2 and 95B.3 Macan models. Its steel-tube construction provides dedicated mounting points for auxiliary LED lights and gives the vehicle a more rugged, off-road-inspired front-end appearance.

Fits:

• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
• Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
• Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>

What This Product Does

This vehicle-specific light bar creates a secure mounting position for additional forward-facing lighting. The supplied custom brackets allow the assembly to be installed without modifying the vehicle's front structure.

Functions

• Provides mounting points for auxiliary lights
• Supports additional forward lighting for night-time and off-road driving
• Uses model-specific brackets for secure installation
• Adds an off-road-style element to the Macan's front end

Technical Details

• Manufacturer: Eurowise
• Construction: steel tubing
• Tube size: 1.5-inch outside diameter with a 0.120-inch wall
• Four evenly spaced auxiliary-light brackets
• Spacing between light brackets: 7.5 inches

Included Components

• One Porsche Macan bull light bar
• Two custom mounting brackets
• Two polyurethane light-bar plugs

Why Replacement Matters

This bar provides a purpose-made alternative to improvised auxiliary-light mounting arrangements. Before installation, measure the intended lights to confirm that their dimensions suit the 7.5-inch spacing between the mounting brackets.

Important Information

This bull light bar is not designed to be used as a vehicle recovery point.

FAQs

• How far apart are the light brackets?
  The spacing between the mounting brackets is 7.5 inches. Measure the intended lights before ordering.
• Does installation require modification of the front structure?
  No. The included custom brackets provide a mounting solution that does not require alterations to the vehicle's front structure.
• Can the bar be used as a recovery point?
  No. It is intended to support auxiliary lighting and must not be used for vehicle recovery.
• What is included?
  The package contains the bull light bar, two custom mounting brackets and two polyurethane plugs.

The Eurowise Bull Light Bar is a front-mounted steel accessory for the Porsche 95B.1 Macan. It provides dedicated mounting positions for auxiliary lights while adding an off-road-oriented appearance to the front of the vehicle.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18

What This Product Does

This light bar supports the installation of additional forward-facing lighting on the Porsche Macan. Custom brackets secure the assembly without requiring alterations to the vehicle's front structure.

Functions

• Provides four evenly spaced mounting brackets for auxiliary lights
• Supports additional lighting for night-time and off-road use
• Creates a more rugged front-end appearance
• Uses vehicle-specific brackets for secure installation

Technical Details

• Manufacturer: Eurowise
• Construction: heavy-duty steel tubing
• Tube dimensions: 1.5-inch outside diameter with a 0.120-inch wall
• Light-bracket spacing: 7.5 inches
• Four evenly spaced auxiliary-light brackets

Included Components

• One Porsche Macan bull light bar
• Two custom mounting brackets
• Two polyurethane light-bar plugs

Why Replacement Matters

This bar is intended for Macan owners who require dedicated mounting positions for auxiliary lighting or want a more off-road-focused front-end design. Measure the intended lights before ordering to confirm compatibility with the 7.5-inch bracket spacing.

Important Information

This bull light bar is not designed or approved for use as a vehicle recovery point.

FAQs

• What size lights can be fitted?
  Light dimensions vary, so measure the intended units before ordering. The spacing between the mounting brackets is 7.5 inches.
• Can the bar be used for vehicle recovery?
  No. The manufacturer specifically states that it must not be used as a recovery point.
• What is supplied with the bar?
  The package contains the bull light bar, two custom mounting brackets and two polyurethane plugs.
• Does installation require changes to the front structure?
  The manufacturer describes the supplied brackets as a mounting solution that does not require modification of the vehicle's front structure.

The Eurowise 1.5-inch bolt-on suspension lift kit is designed for Porsche 95B Macan models. Supplied as a four-spacer set, it raises the vehicle while retaining the characteristics of the factory suspension.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21

What This Product Does

This spacer kit provides a total lift of 1.50 inches to increase ground clearance and create a more level front-to-rear stance. Its bolt-on arrangement is intended to make use of the available movement of the factory axle while preserving factory-like ride quality.

Functions

• Raises the vehicle by a total of 1.50 inches
• Increases ground clearance for rough-road and off-road use
• Helps level the front and rear ride height
• Works with the original suspension arrangement
• Retains factory-like ride characteristics

Technical Details

• Manufacturer: Eurowise
• Product type: bolt-on suspension spacer lift kit
• Total lift: 1.50 inches
• Kit contents: two front spacers and two rear spacers
• Some vehicle configurations may require adjustable anti-roll bar end links

Why Replacement Matters

This kit is intended for Macan owners who require additional clearance or a more level stance without replacing the complete factory suspension system. Correct installation and subsequent suspension geometry checks are important whenever vehicle ride height is changed.

FAQs

• How much lift does the kit provide?
  The complete spacer kit provides a total lift of 1.50 inches.
• What is included?
  The set contains four spacers: two for the front and two for the rear.
• Does it replace the factory suspension?
  No. It is a bolt-on spacer kit designed to work with the original suspension arrangement.
• Are additional parts required?
  Some fitments may require adjustable anti-roll bar end links.
• Will suspension alignment be required?
  A full geometry check is advisable after installation because the vehicle ride height has been altered.

Gen 2 Air Suspension Delete Module by SKTEC for petrol-powered Porsche 958 Cayenne models from. It is intended for vehicles being converted from factory air suspension to coil springs.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17

What This Product Does

This electronic module is designed to remove the air suspension warning messages that can remain on the dashboard after a Cayenne has been converted to coil-spring suspension. It allows the conversion to be completed without retaining the original air-suspension arrangement solely to prevent warning lights.

Functions

• Supports conversion from air suspension to coil springs
• Removes associated air suspension dashboard warnings
• Can be used with original-equipment struts when no suspension lift is required
• Can be paired with EXD coilovers where additional lift is required

Technical Details

• Manufacturer product designation: Gen 2 9PA Air Suspension Delete Module
• Vehicle platform: Porsche Cayenne 92A chassis, also known as the 958
• Model years: 2011–18
• Application: air-to-coil-spring suspension conversion
• Does not fit Diesel or Hybrid variants

Symptoms of Fault

• Air suspension warning lights remain illuminated after a coil-spring conversion
• The vehicle has been mechanically converted but still requires the original air-suspension warnings to be addressed

Why Replacement Matters

Changing from air suspension to coil springs removes the original pneumatic suspension hardware but may leave related warning messages active. This module is intended to address those dashboard warnings as part of the conversion. It may be used with OEM struts for a standard-height arrangement or combined with EXD coilovers when lift is required.

FAQs

• What is this module used for?
  It is used when converting a compatible Cayenne from air suspension to coil springs and is designed to remove the resulting air suspension warning lights.
• Can it be used without lifting the vehicle?
  Yes. The manufacturer states that it can be used with OEM struts when no additional lift is required.
• Can it be used with lifted suspension?
  Yes. It can be paired with EXD coilovers where additional suspension lift is required.
• Does it fit Cayenne Diesel or Hybrid models?
  No. Diesel and Hybrid variants are specifically excluded from the stated fitment.

The Eurowise Gen 2 ExD Lift Suspension System with OE strut mounting components is designed for all Porsche 958 Cayenne and Volkswagen Touareg T3 models from 2011–18. Developed with Dobinsons Spring and Suspension, this adjustable coilover package is intended for road, overland and off-road applications.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17

What This Product Does

The system replaces the standard dampers and springs with heavy-duty monotube coilovers, providing an adjustable increase in ride height together with additional shock travel. Its threaded damper bodies permit ride-height adjustment, while model-specific front springs are shaped to maintain spindle clearance at full droop.

Functions

• Provides approximately 1.5–2 inches of lift without a subframe drop
• Supports approximately 2.5–3 inches of total lift when combined with a 1/2-inch subframe drop
• Adds one inch of shock travel compared with the standard dampers
• Increases bump and droop movement for rough-road and off-road use
• Allows ride height to be fine-tuned through the threaded shock bodies
• Replaces an air-suspension arrangement when installed with the required OE mounting components

Technical Details

• Monotube dampers with high-flow 50mm pistons
• 10mm reinforced shock forks compared with 5mm standard forks
• CNC-machined billet aluminium pistons with composite wear bands
• Three-stage FKM and HNBR sealing system
• Corrosion-resistant EDP surface protection

Kit Contents

• Front and rear shock absorbers
• Front and rear coil springs
• Height-adjustment wrenches
• Front lower shock bolts
• Strut mounting components for an air-suspension conversion (Optional)

Why Replacement Matters

The reinforced forks, proprietary springs and increased damper travel are designed to address the higher loads associated with lifted and off-road vehicles. Correct installation is important because ride-height changes affect suspension geometry. Inspect every mounting point during fitting and confirm that all associated components are suitable for continued use.

Installation Notes

Vehicles converted from air suspension require the OE strut mounting kit supplied with this selected variant. Where any original upper mounts or rubber bushes are retained, inspect them carefully for cracking, deterioration or previous wear before assembly and replace them where necessary.

FAQs

• Is a subframe drop required?
  No subframe drop is specified for a lift of approximately 1.5–2 inches. Eurowise specifies a 1/2-inch subframe drop when configuring the system for approximately 2.5–3 inches of total lift.
• Is the ride height adjustable?
  Yes. The threaded coilover bodies allow the ride height to be fine-tuned within the stated adjustment range.
• Does the kit fit air-suspension vehicles?
  Yes, when the required OE strut mounting components are used for the conversion.
• Does it fit every second-generation Cayenne?
  The manufacturer lists all Porsche Cayenne 958 and Volkswagen Touareg T3 models from 2011–18.

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018

Eurowise ½” Subframe Drop Kit

Lifting your Cayenne, Touareg, or Q7 changes the distance and angle between the transmission and wheel hubs, which can lead to axle binding, clicking, and an overall rougher driving experience. The Eurowise ½” Subframe Drop Kit helps correct these issues by lowering the subframe to improve alignment.

The kit includes 8 anodized billet spacers and extended hardware, allowing you to lower both the front and rear subframes. While not required for every build, we recommend a ½" drop when running approximately 2 inches of lift for optimal drivability.

Installing a subframe drop will slightly decrease overall lift.

Kit Includes:

(4) 1” Front Subframe Spacers w/ Hardware

(4) 1” Rear Subframe Spacers w/ Hardware

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise Tubular Upper Control Arms for the 1st generation Porsche Cayenne, VW Touareg, and Audi Q7

Lifting your Porsche Cayenne, Volkswagen Touareg, or Audi Q7 more than 2.5" can result in excessive positive camber that exceeds the factory adjustment range. Eurowise Tubular Upper Control Arms are engineered to resolve this issue while enhancing flexibility and reinforcing strength.

Key Features:
Enhanced Ball Joints: Provide a wider adjustment range than OEM parts, increasing suspension articulation for improved performance.
Silicone Dust Boots: Offer superior durability compared to spherical bearings and require minimal maintenance.
Improved Handling: Inner joints are designed to minimize deflection under load, delivering better stability and performance both on-road and off-road.
Durable Construction: Built from DOM tubing, MIG welded, and finished with a satin black powder coat for long-lasting strength and reliability.

After years of extensive testing in both on-road and off-road conditions, these control arms have demonstrated exceptional durability, with zero failures reported. They are significantly stronger than OEM arms while offering precise camber adjustment to bring your alignment back into spec.

Fitment:
2002–2010 Volkswagen Touareg
2002–2010 Porsche Cayenne
2007–2015 Audi Q7

Upgrade your suspension for improved durability, enhanced alignment capability, and superior handling in any environment.

These are designed to position the air suspension level sensor arm in its original OEM location; however, slight adjustments or recalibration of the sensor arm may be necessary.

Porsche 958 Cayenne - 2010 to 2017
** Not for E-Hybrid**

Eurowise Tubular Upper Control Arms for the 2nd generation Porsche Cayenne (958), VW Touareg, and Audi Q7

When lifting your Porsche Cayenne or Volkswagen Touareg more than 2.5", you may experience excessive positive camber beyond the factory adjustment range. Eurowise Tubular Upper Control Arms are engineered to resolve this issue while enhancing flexibility and reinforcing durability.

Key Features:

• Advanced Ball Joints: Provide a broader adjustment range compared to OEM components, improving overall suspension articulation.
• Silicone Dust Boots: Offer superior durability over spherical bearings with minimal maintenance required.
• Improved Handling: Inner joints are designed to reduce deflection under load, delivering better performance both on-road and off-road.
• Heavy-Duty Construction: Made from DOM tubing, MIG welded, and powder-coated in satin black for exceptional strength and longevity.

With years of rigorous on-road and off-road testing, these arms have proven to be significantly stronger than OEM parts, offering unmatched durability and reliability. They provide the necessary adjustment to bring your camber back into spec while maintaining robust performance.

Fitment:
2011–2018 Porsche Cayenne (excluding e-hybrid models)
2011–2018 Volkswagen Touareg

Upgrade your suspension with Eurowise Tubular Upper Control Arms for better alignment, enhanced durability, and improved handling on any terrain.

These are designed to position the air suspension level sensor arm in its original OEM location; however, slight adjustments or recalibration of the sensor arm may be necessary.

Porsche 958 Cayenne - 2010 to 2017

Product Description

Eurowise transmission drop spacers are designed to realign your driveshaft when lowering the subframe. We created these spacers specifically for the Gen 1 and Gen 2 Porsche Cayenne, Volkswagen Touareg, and Audi Q7 platforms after observing improved longevity of the input/output shaft seals on the driveshaft compared to vehicles without them. In some cases, they have also helped reduce drivetrain vibration on higher-mileage vehicles with worn driveshaft joints.

After 4+ years of research on hundreds of vehicles. We've seen front and rear driveshaft flex dust boots tear or separate from the subframe drop causing slight angle change from the drop. In some cases if your original boots were worn out it could be unavoidable. While the transmission spacer drop is not 100% required. Its advantageous to replace to keep driveline angles straight and extent the rubber boot life. This kit drops the transmission and center driveshaft support. Also included is a center support bracket to replace the original one from rubbing.

Select the thickness of the transmission drop bracket according to your subframe drop size. If you have a 1/2 inch subframe drop, you will not receive center support bearing drop spacers 

Product Includes: 
2 x Transmission drop spacers
1 x Tunnel brace
1 x Driveshaft support drop spacers
1 x Installation hardware

*only 1 pair per order*

0.5” Spacer Kit - For vehicles with .5" Subframe Drop 

1” Spacer Kit - For vehicles with 1” Subframe Drop 

1.5” Spacer Kit - For vehicles with 1.5” Subframe Drop 

Additional Options:
After over four years of research on hundreds of vehicles, we've found that front and rear driveshaft flex dust boots can tear or separate from the subframe drop, leading to slight angle changes. In some instances, worn-out original boots may make this unavoidable. While a transmission spacer drop isn't always necessary, it can help maintain proper driveline angles and extend the life of the rubber boots.

This kit includes a transmission and center driveshaft support drop, along with a center support bracket designed to replace the original one, preventing potential rubbing issues.

Choose the appropriate transmission drop bracket thickness based on your subframe drop size. Note: If you have a 1/2-inch subframe drop, center support bearing drop spacers will not be included.

Porsche 958 Cayenne - 2010 to 2017

2" lift kit for the second generation, 958 Porsche Cayenne and VW Touareg

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail.

This is a direct bolt on lift kit that installs over the top of the OEM Strut in the front and between the upper strut mount and the spring on the rear. Requires removal of front and rear strut assembly. Front struts do not require disassembly.

What's different about our kit vs. the competitors? We include an shock shaft extension that accounts for the spacer that you install between the spring and strut mount. This keeps your spring rate, shock travel, and ride quality the same as OE. This also translates into better performance on the trails.

Strut extensions come with the option for vehicles with and without electronic dampening. To install the connector must be de-pinned, the harness fed through the center of the extension, and then the connector can be reassembled.

Fitment:  
2011-2018 Volkswagen Touareg (with steel coil spring suspension)
2011-2018 Porsche Cayenne (with steel coil spring suspension)

Kit Includes: 
 2 x Front Spacers with Hardware
2 x Rear Spacers  
2 x Rear Shock Extensions
1 x Loctite for Rear Shock Extension