do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a specialist replacement-parts brand developed around Porsche applications, covering routine maintenance, mechanical repairs, restoration and difficult-to-source components for classic and modern models. Design911 selects brands for quality and Porsche fitment, with knowledgeable specialists available to help owners and workshops choose suitable parts.
The OE Match story
OE Match is focused on preserving Porsche vehicles by returning hard-to-find and no-longer-available components to the market. Its purpose is to keep Porsche vehicles maintained, repaired, restored and usable for the future, particularly where original components have become expensive, difficult to source or discontinued.
Supplied catalogue information records over 8000 individual part numbers, more than 11,800 OE cross-references and over 100 new products in engineering, while the wider product programme contains more than 9,000 variants; these figures describe different measures of the range. Continuing development involves researching the parts owners and workshops genuinely need, working with specialist manufacturers, reviewing engineering specifications, assessing samples, testing and approving components before release. From small seals, clips and brackets to major mechanical components, the aim is to prevent a difficult-to-source item from holding up an entire repair or restoration: preserving Porsche, one part at a time.
Why choose OE Match for your Porsche
OE Match is a quality aftermarket and OE-equivalent replacement option developed specifically around Porsche applications rather than adapted from a general aftermarket range. Original references, vehicle fitment information, dimensions, materials and component specifications are used to identify suitable replacements for routine service, age-related wear, larger mechanical repairs and restoration work.
Its research, development and quality-control processes assess material and manufacturing quality, dimensions and specification, OE-reference compatibility, vehicle application, fit and function, supplier samples, product consistency, packaging and presentation. Where appropriate, physical inspection and fitment evaluation form part of final approval, and products must meet the programme's requirements before entering the catalogue.
Coverage includes the Porsche 356, 911, 912, 914, 924, 944 and 928, alongside the 964, 993, Boxster 986, 996, Cayenne, Cayman and 997. This gives owners, enthusiasts, independent specialists and professional workshops a Porsche-focused replacement option alongside Genuine Porsche parts. OE Match is intended to provide correctly specified, OE-equivalent replacements with sensible running costs rather than simply serving as a lower-cost alternative. Design911 selects the brands it carries for quality and fitment and can advise customers on suitable options for maintenance, restoration or upgrades.
- A replacement-parts programme developed specifically around Porsche applications.
- More than 9,000 product variants within the wider programme.
- Original Porsche part-number cross-references wherever applicable.
- Dedicated research, development, sample evaluation and quality-control processes.
- Classic and modern Porsche coverage for maintenance, repairs and restoration.
- Development focused on difficult-to-source and discontinued applications.
Categories we stock from this brand
Design911 stocks OE Match across an extensive range of Porsche mechanical, electrical, body, interior and maintenance categories. Original Porsche references help identify replacements where part numbers have been superseded or several versions exist. Always check the model, production year, engine, transmission, side or position, connector type where relevant and individual product notes. Incorrect application, mismatched versions, reused seals or hardware and worn supporting components can cause noise, premature wear, leaks, fitment problems or repeat failures. Safety-critical specifications and installation should be checked by a competent technician.
Engine components
OE Match engine coverage supports maintenance, repair and rebuilding work, ranging from small retaining hardware and brackets to components associated with the cylinder heads, crankcase, valve train and supporting engine systems.
- Confirm the engine type, capacity, production year and original reference.
- Inspect associated seals, fasteners and supporting components during engine work.
- Check whether components require specialist measuring, machining or installation procedures.
Engine seals and gaskets
Replacement seals and gaskets help address oil, coolant, air and vacuum leaks throughout classic and modern Porsche engines. The range supports individual repairs as well as more extensive engine resealing and rebuilding projects.
- Identify the source of a leak before replacing components.
- Check mating surfaces, housings and fasteners for wear or damage.
- Use the correct gasket or seal version for the engine and production year.
Cooling systems and radiators
OE Match cooling-system coverage includes components used to circulate coolant, control temperature and transfer heat away from the engine. These parts support repairs involving radiators, pipework, hoses, fittings and related cooling hardware.
- Investigate coolant loss, overheating, staining and damaged hoses promptly.
- Check pressure caps, clips, seals and connecting pipes during cooling-system work.
- Bleed and refill the system using the correct model-specific procedure.
Oil system components
Oil-system parts support engine lubrication, oil circulation, filtration and leak repair. Coverage can assist with routine servicing as well as work on oil lines, fittings, housings, seals and associated hardware.
- Confirm thread sizes, connection types and component position.
- Inspect flexible lines and seals for age-related hardening or leakage.
- Verify the required oil specification and system capacity separately.
Transmission and drivetrain
OE Match transmission and drivetrain parts support manual and automatic gearbox repairs, clutch operation, gear selection and the transfer of power to the driven wheels.
- Match parts to the exact gearbox or transmission code where specified.
- Check splines, bearings, seals, joints and supporting hardware for related wear.
- Diagnose noise, vibration or difficult gear selection before ordering components.
Engine and gearbox mounts
Replacement mounts help support the powertrain, maintain alignment and control unwanted engine and transmission movement. Worn mounts may contribute to vibration, knocking, drivetrain shunt or unsettled gear changes.
- Inspect mounts for cracking, collapse, separation and oil contamination.
- Check mounting bolts, washers, brackets and surrounding hardware.
- Consider replacing paired mounts together where required by the application.
Suspension and steering
OE Match suspension hardware and steering components support repairs intended to restore accurate wheel control, alignment and predictable steering response. Coverage includes wear-related items used around suspension joints, mounting points and steering assemblies.
- Investigate play, knocking, uneven tyre wear and unstable handling.
- Check left- and right-hand applications and axle position carefully.
- Arrange wheel alignment after replacing components that affect geometry.
Braking components
OE Match braking components form part of its Porsche-specific replacement programme. Brake work may address wear, restore stopping performance or prepare a car for fast-road or track use, but the specification of each component must suit the intended application.
- Symptoms prompting inspection include vibration, longer stopping distances, squealing, pulling to one side, warning lights and visible disc or pad wear.
- Confirm whether the selected component is an OE-equivalent replacement or a performance upgrade.
- Check whether new fitting kits, seals, hardware and pad wear sensors are required.
Electrical and ignition
Electrical and ignition coverage supports Porsche repairs involving starting, charging, ignition and engine-management faults. Correct diagnosis is particularly important because wiring, supply voltage, earth connections and other supporting components can produce similar symptoms.
- Typical symptoms include intermittent no-start, misfires, rough idle, poor charging, warning lights and heat-soak failures.
- Check the original reference, engine, production year and connector type.
- Test power supplies, earths and wiring before replacing electrical components.
Sensors and switches
OE Match sensors and switches provide replacement options for systems that monitor or control engine operation, temperature, pressure, position, lighting and driver warnings.
- Similar-looking sensors may have different calibrations, connectors or applications.
- Use fault codes as a diagnostic guide rather than proof that a sensor has failed.
- Inspect connectors for corrosion, damaged terminals and degraded wiring.
Heating and air conditioning
Heating, ventilation and air-conditioning components support cabin temperature control, airflow and demisting. The range covers replacement needs involving blower assemblies, controls, ducts, valves, fittings and related hardware.
- Check whether parts differ between left- and right-hand-drive vehicles.
- Confirm connector, housing and production-year variations.
- Refrigerant-system work should be completed by an appropriately qualified technician.
Exhaust components
OE Match exhaust coverage supports repairs to worn, corroded or leaking parts of the exhaust system, together with associated brackets, clamps, seals and fittings.
- Inspect joints, flanges, fixings and heat shields when replacing exhaust parts.
- Check emissions equipment and sensor positions for the specific model.
- Corroded fasteners may require additional hardware during installation.
Rubber seals and hoses
Rubber components are important throughout a Porsche for sealing fluids, air, weather and noise. OE Match coverage assists with replacing hardened, split, swollen, leaking or missing hoses, boots, grommets and sealing profiles.
- Match the shape, dimensions, connection points and intended fluid or system.
- Inspect adjoining clips, pipes and sealing surfaces.
- Age-related rubber deterioration can affect several nearby components at once.
Exterior trim and body components
Exterior and body coverage supports accident repair, cosmetic refurbishment and restoration. It includes replacement needs involving trim, lamps, brackets, fixings, seals and other model-specific body fittings.
- Confirm body style, side, position, colour and finish where applicable.
- Check whether clips, seals or mounting hardware are supplied separately.
- Compare the original component and reference before installation.
Interior components
OE Match interior products support the repair and restoration of cabin fittings that may have worn, faded, broken or become difficult to source with age.
- Check colour, finish, side and model-year variations.
- Inspect clips, brackets and fixing points before fitting replacement trim.
- Some interior components may differ according to body style or equipment specification.
Service and maintenance parts
OE Match service components support scheduled upkeep across Porsche generations, helping owners and workshops maintain reliability, efficiency and system protection while addressing everyday wear.
- Hard starting, rough idle, poor fuel economy and warning lights can accompany clogged filters or worn ignition components.
- Select service items against the exact Porsche model, engine, production year and required specification.
- Review related seals, hardware and other maintenance items when planning a larger service.
Restoration hardware
Restoration hardware covers the small but essential fasteners, brackets, clips, fittings and retaining components needed to complete repairs accurately and securely.
- Record the position and orientation of original hardware during dismantling.
- Check thread, length, finish, quantity and model application.
- Replacing damaged or heavily corroded hardware can prevent delays during reassembly.
Difficult-to-source and discontinued applications
A central purpose of the OE Match programme is identifying gaps where original Porsche parts have become difficult to obtain or are no longer available. Reintroduced components can help prevent one missing seal, clip, bracket or mechanical part from delaying an otherwise complete repair or restoration.
- Use OE cross-references and dimensions to verify the intended application.
- Check whether the original number has been superseded.
- Review product-specific fitment notes where several component versions exist.
Brake Pad Wear Sensors
OE Match brake pad wear sensors provide replacement options for Porsche brake servicing. Sensors may need renewal when pads are replaced or when a worn or damaged sensor causes a brake wear warning.
- Warning messages with new pads, damaged sensor cables and broken clips warrant inspection.
- Match the OE reference, caliper application, model year, connector and sensor position.
- Check the quantity required and whether sensors are included with the selected brake parts.
Engine Electrical
OE Match engine electrical parts cover starting, charging, ignition, sensor and switch applications. They support repairs involving intermittent no-start, misfires, rough idle, stalling, battery drain, poor charging, warning lights, inconsistent readings and heat-related failures.
- Similar-looking components may have different electrical or vehicle applications.
- Repeat faults can indicate a mismatched component or a worn supporting item.
- Battery condition, earth straps, connectors and voltage drop should be checked during diagnosis.
Service Parts
OE Match service parts cover everyday maintenance requirements intended to protect the engine, gearbox and other major systems. Routine replacement can address natural wear caused by heat, friction, fluid degradation and environmental exposure.
- Match filters, ignition parts, belts and fluids to the exact vehicle specification.
- Many symptoms overlap, so establishing a sound service baseline can assist diagnosis.
- Keep a service record to support future maintenance and fault finding.
Service Kits
OE Match service kits group key maintenance components to simplify servicing and establish a known baseline. They are particularly useful when catching up on overdue maintenance or assessing sluggish running, inconsistent idle, poor economy and reduced performance.
- Match each kit to the exact Porsche model, engine and production year.
- Contents vary, so review the included components rather than assuming every service item is supplied.
- Add any required while-you-are-there items, such as spark plugs, belts, fluids, seals or hardware.
Explore the range
Browse the OE Match Porsche range at Design911, then narrow your selection by model and category and cross-check the original part references and fitment notes. Whether you are planning routine maintenance, a workshop repair or a complete restoration, Design911's Porsche specialists can help identify suitable components within a programme focused on fitment, quality and long-term vehicle preservation.
Includes :
- 6 x Differential Housing Lock Plate. (90133228501)
- 12 x Hexagon-head bolt (92833227606)
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 924 1976-85
Click 'Zoom in' for large parts diagram.
Diagram ref no 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133228501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 914 (1970-1976)
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 924 1976-85
Click 'Zoom in' for large parts diagram.
Diagram ref no 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133228501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 914 (1970-1976)
The Rear Anti-Roll Rod Link Bushing (Upper / Lower) is a high-quality suspension bushing set designed to restore correct fitment and controlled movement at the rear stabilizer (anti-roll/sway) bar link mounting points on compatible Porsche models. These bushings fit at the upper and lower ends of the rear anti-roll rod link, providing a cushioned connection between the stabilizer bar system and the rear suspension components.
Sold Each.
x4 Required Per Car.
Fits:
- Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 258Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Fits On To Diagram Ref No 5
Rear anti-roll link bushings play an important role in maintaining stable handling by allowing the stabilizer bar to transfer forces between the left and right suspension, helping reduce body roll and improve balance during cornering. Over time, bushings can harden, crack, or deform due to age, road conditions, and repeated suspension loads. Worn bushings may cause knocking noises over bumps, increased vibration, and reduced rear-end stability.
What This Product Does:
- Provide cushioned, pivoting mounts for the rear anti-roll bar links
- Allow controlled movement of the sway bar under load
- Reduce body roll during cornering
- Improve rear suspension stability and balance
- Dampen noise and vibration transmitted into the cabin
Symptoms Of A Worn Or Failed Bushing:
Noise & Vibration
- Clunking, knocking, or rattling noises from the rear suspension
- Buzzing or vibration felt over rough surfaces
Handling & Stability Issues
- Noticeable body lean in corners
- Loose or vague rear handling feel
- Reduced confidence in directional stability
Wear Patterns
- Uneven or accelerated rear tyre wear
- Inconsistent alignment readings
- Play detected at sway bar links during inspection
Physical Signs
- Cracks, splits, or visible deterioration of the bushing material
- Excessively hardened or deformed rubber/elastomer
Why Replacement Matters:
- New bushings allow the sway bar links to operate correctly, reducing body roll and improving balance in turns and quick direction changes.
- Fresh bushings absorb vibration and reduce noise more effectively than old ones, leading to a more refined ride.
- Replacing worn bushings eliminates knocking and rattling caused by excessive play in the sway bar link connections.
- Properly functioning bushings reduce stress on link joints and other suspension parts, helping prevent premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B505465A
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Shop Securely
12 Month Warranty
Worldwide Delivery
Differential rebuild kit for Porsche 911 1987–1989 G50 gearbox cars by OE Match, suitable for selected 911 3.2 G50 and 3.3 Turbo (930) models.
What This Product Does This kit provides the core components typically required to overhaul the rear differential assembly on G50-equipped Porsche 911 models, helping restore correct internal clearances and consistent operation of the unit.
Kit includes:
1 x Differential outer bearing, (Ref: 99905906400)
1 x Taper roller bearing. (Ref: 99905902702)
6 x Differential Housing Lock Plate. (Ref: 90133228501)
12 x Hexagon-head bolt (Ref: 92833227606)
Functions
- Supports refurbishment of worn differential internals
- Helps re-establish correct bearing support and gear contact
- Assists in reducing internal play and backlash when set up correctly
- Provides parts needed for a planned diff rebuild alongside other drivetrain work
Symptoms of Fault
- Whining or howling noises from the rear at cruise or on overrun
- Clunks when taking up drive or during gear changes
- Noticeable backlash or “thud” in the driveline
- Oil leaks from differential side seals or input area
- Vibration or roughness that changes with road speed
- Reduced or inconsistent traction on cars with limited-slip units
Why Replacement Matters
Over time, bearings, shims and internal hardware in the rear differential wear, especially on older Porsche 911 models that see mixed road use and age-related degradation. Refreshing these parts during a rebuild helps stabilise gear alignment, supports smooth torque transfer and can prevent accelerated wear of crownwheel, pinion and bearings. For G50 cars in particular, maintaining a healthy differential complements the robust gearbox design and contributes to a more predictable, refined drivetrain.
Fits
- Porsche 911 & 912 (1965–1989) – selected models with G50 gearbox
- Porsche 911 1987–1989 3.2L G50
- Porsche 911 1978–1989 3.3L Turbo (930) – applicable versions with G50 transmission
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905906400
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
The Upper Front Control Arm Bushing (Front / Rear) is a high-quality suspension bushing set designed to restore correct mounting and controlled movement of the upper front control arm on compatible Porsche models, commonly within the Cayenne 958 platform range. These bushings fit at the control arm mounting points and provide a stable yet flexible connection between the suspension arm and the chassis/subframe.
Sold Each.
x4 Required Per Car.
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Fits On To Diagram Ref No 15
Upper control arm bushings play an important role in maintaining front suspension geometry and alignment, helping deliver stable steering response, smooth ride comfort, and predictable handling under braking, acceleration, and cornering loads. Over time, bushings can harden, crack, or deform due to age, heat, and constant suspension movement. Worn bushings may cause clunking noises, increased vibration, steering instability, and uneven tyre wear.
What This Product Does:
- Secure the upper control arm to the vehicle’s chassis or subframe
- Absorb vibration and road shock before it reaches the cabin
- Allow controlled articulation of the suspension
- Help maintain correct suspension geometry and alignment
- Reduce noise, harshness, and vibration (NVH) from suspension movement
Symptoms Of A Worn Or Failed Bushing:
Handling & Stability Changes
- Loose, sloppy steering feel
- Slight drift or pull during acceleration/braking
- Reduced responsiveness through corners
- Rear or front alignment that won’t hold
Noise & Comfort Issues
- Clunking or knocking noises when accelerating, braking, or driving over bumps
- Front suspension noise during turns
- Increased vibration felt in the cabin
Wear / Physical Indicators
- Visible cracks, splits, or deformation in the bushing material
- Excessive play when the control arm is manipulated
- Hardened, flat, or collapsed rubber/elastomer
Why Replacement Matters:
- Fresh bushings maintain correct suspension geometry and improve steering feedback by keeping the upper control arm securely positioned.
- New bushings absorb vibration and reduce harshness more effectively than old, hardened ones—delivering a smoother ride.
- Replacing worn bushings eliminates clunking and rattling caused by excessive play in the suspension mount.
- A stable upper control arm reduces stress on ball joints, lower arms, and other suspension links, preventing premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834105100A
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Direct-fit upgraded replacement for the rear flex disc (guibo) on AWD Porsche 996 Carrera 4, 4S and Turbo models. OEM cross-reference PCG42102001. Rubber body with metal bushings to isolate driveline vibration while transmitting torque smoothly. Perfect when your original guibo shows age, cracking, or causes driveline vibration/clunks.
Compatible for:
- · Porsche 996 C4 3.4L 1997-08/01
- · Porsche 996 C4 3.6L 09/01-2005
- · Porsche 996 C4S 3.6L 09/01-2005
- · Porsche 996 TURBO 2000-05
- · Porsche 996 GT2 2001-05
- · Porsche 997 MK1 Carrera 2 3.6L 2005-08
- · Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- · Porsche 997 MK1 Carrera 4 3.6L 2005-08
- · Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- · Porsche 997 MK1 TURBO 2007-09
- · Porsche 997 MKII Turbo 2010-13
Why you should replace the flex disc
- Worn rubber = vibration & driveline shock. The flex disc isolates rotational forces, as the rubber hardens, cracks or tears, it transmits vibration and can produce shuddering at idle/low speeds or a clunk during acceleration. Owners commonly report these symptoms before a failure.
- Prevents secondary damage. A failed flex disc can allow excessive play between the driveshaft and transmission flange, stressing flange bolts, the driveshaft and the transmission output — leading to far more expensive repairs.
- Affordable, quick fix vs replacing the whole shaft. Replacing this single part is significantly cheaper than replacing the full cardan/driveshaft assembly and restores NVH and drivability.
Common issues / failure signs
- Noticeable vibration through the car (often at certain speeds or under acceleration).
- Clunking or knocking from the center/rear when accelerating from low speed or shifting — typically caused by lost rubber compliance or torn bores.
- Visible cracking, chunks missing, or separation of the rubber around the bolt bores (inspect visually with the car safely supported). Micro-cracks can quickly grow into failure.
- Corroded or stretched mounting hardware — always inspect/replace bolts and washers when servicing the guibo.
Fits to No 8 , 9, 13 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99642101000
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MKII Turbo 2010-13
The Rear Beam Bushing (Front Left / Right, Insert) is a high-quality suspension bushing insert set designed to restore correct mounting and vibration isolation at the front left and front right mounting points of the rear axle beam / rear crossmember on compatible Porsche models. These inserts fit into the front positions of the rear beam bushing housings, providing a stable yet cushioned connection between the rear beam assembly and the vehicle’s chassis.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Fits On To Diagram Ref No 2
Rear beam bushing inserts play an important role in reducing noise and vibration while helping maintain correct rear suspension geometry under load. Over time, the bushing material can harden, crack, or deform due to age, heat, and constant suspension movement. Worn inserts may cause clunking noises, increased harshness, rear-end instability, and uneven tyre wear caused by alignment changes.
What This Product Does:
- Provide damped support between the rear axle beam and the vehicle’s body/chassis
- Help absorb vibration and road harshness before it reaches the cabin
- Ensure consistent rear suspension geometry under load
- Reduce noise and vibration from rear suspension movement
- Support stable rear handling and ride comfort
Symptoms Of A Worn Or Failed Rear Beam Bushing Insert:
Noise & Comfort Issues
- Clunking, knocking, or thudding noises from the rear suspension
- Increased vibration felt through the floor or rear seats
- Buzzing or vibration at certain speeds
Handling & Stability Changes
- Rear end instability or “wandering” feel at higher speeds
- Poor response in rear handling during turns
- Uneven tyre wear due to alignment variation
Wear / Physical Signs
- Visible hardening, cracking, or splitting of the bushing material
- Excessive movement at the rear beam connection when inspected
- Flat, deformed, or deteriorated rubber/elastomer inserts
Why Replacement Matters:
- New inserts absorb vibration and road shock better than old, hardened bushings — leading to a smoother and quieter ride.
- Properly functioning bushings help keep the rear axle beam aligned, preserving handling balance and tyre contact.
- Replacing worn inserts eliminates clunking and vibration caused by excessive movement in the rear beam mount.
- A solid rear beam connection reduces stress on differential mounts, trailing arms, and other suspension links.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97033125704A
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 955 Cayenne 3.2L 2003-06 (D9J Engines)
Porsche 955 Cayenne 4.5L S / Turbo 2003-06 (T90 / T91 Engines)
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne 3.0L DIESEL 2007-10
Click 'Zoom in' for large parts diagram.
Diagram ref no. 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95510614723
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
Fits:
Cars with 8-speed automatic gearbox, for four-wheel drive, mechatronic with software
Porsche 9YA Cayenne 05/2017>> Gearbox A2901
Porsche 9YA Cayenne S 05/2017>> Gearbox A3001
Cars with 8-speed automatic gearbox, For vehicles with
hybrid drive, mechatronic with software
Porsche 9YA Cayenne Hybrid 05/2017>> Gearbox A30P1
Porsche 9YA Cayenne Hybrid 05/2017>> Gearbox A20P1
*Porsche currently list two part numbers for this product. This sump has twelve mounting points - you will need to check your existing sump is the same in order to ensure compatibility. If your existing sump has thirteen mounting points, you will need to use PAB39804703 instead.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB398009
The product you are viewing cross references to these numbers
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
- Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
.jpg?width=200&height=150&quality=65&format=webp "Rear Lower Lateral Control Arm Bushing, Outer To Knuckle. Porsche 970 Panamera / 9J1 Taycan 2009>> - 298501341, 97033124400, 9J1501341 - TED73811")
The Rear Lower Lateral Control Arm Bushing, Outer to Knuckle is a high-quality suspension bushing designed to restore correct fitment and controlled movement at the outer mounting point of the rear lower lateral control arm, where it connects to the rear knuckle/upright. This bushing plays a key role in maintaining rear suspension geometry by providing a stable yet flexible connection that absorbs vibration and road impacts while keeping the control arm securely positioned under load.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
- Porsche 9J1.1 Taycan 2020-24
- Porsche 9J1.1 Taycan Sport Turismo 2020-24
- Porsche 9J1.1 Taycan 4 Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S 2020-24
- Porsche 9J1.1 Taycan 4S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S Sport Turismo 2020-24
- Porsche 9J1.1 Taycan GTS 2020-24
- Porsche 9J1.1 Taycan GTS Sport Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo 2020-24
- Porsche 9J1.1 Taycan Turbo Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo Sport Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S 2020-24
- Porsche 9J1.1 Taycan Turbo S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S Sport Turismo 2020-24
- Porsche 9J1.2 Taycan Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Sport Turismo 2024>>
- Porsche 9J1.2 Taycan 4 Cross Turismo 2024>>
- Porsche 9J1.2 Taycan 4S Sport Saloon 2024>>
- Porsche 9J1.2 Taycan 4S Sport Turismo 2024>>
- Porsche 9J1.2 Taycan 4S Cross Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo GT Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo GT with Weissach Package Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo Sport Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo Cross Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo S Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo S Sport Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo S Cross Turismo 2024>>
Diagram Ref No 2
As the suspension moves during braking, acceleration, and cornering, this bushing helps control unwanted movement that can affect rear wheel alignment, handling balance, and tyre wear. Over time, bushings can deteriorate due to age, heat, and constant load cycling, leading to cracking, deformation, knocking noises, and reduced stability.
What This Product Does:
- Provide a flexible mounting point between the rear lower lateral arm and the knuckle
- Absorb road shock and vibration to reduce noise and harshness
- Help maintain accurate rear wheel alignment and suspension geometry
- Support correct wheel path and stability during acceleration, braking, and cornering
- Reduce uncontrolled movement at critical suspension joints
Symptoms Of A Worn Or Failed Bush:
Handling & Stability Issues
- Loose or vague rear handling
- Wander or instability in corners
- Reduced confidence under braking
- Unpredictable rear-end behaviour
Noise & Comfort Changes
- Clunking or knocking from the rear suspension when driving over bumps
- Rattles or vibration transmitted into the cabin
- Creaking during initial movement or steering inputs
Wear Patterns
- Uneven or accelerated tyre wear
- Difficulty holding alignment
- Play or movement detected at the control arm when inspected by hand
Physical Signs
- Visible splits, tears, or cracking of the bushing material
- Flattened, hardened, or deformed rubber/elastomer
Why Replacement Matters:
- New bushings keep the rear lower lateral arm properly mounted and reduce unwanted articulation that degrades traction and handling.
- Replacing worn bushings reduces noise, vibration, and harshness (NVH), improving overall ride quality.
- Firm, controlled suspension geometry improves repeatable handling during dynamic driving, cornering, and emergency manoeuvres.
- Excessive movement due to worn bushings can place extra stress on control arms, joints, and knuckles — leading to premature wear of other suspension parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9J1501341
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
- Porsche 9J1.1 Taycan 2020-24
- Porsche 9J1.1 Taycan Sport Turismo 2020-24
- Porsche 9J1.1 Taycan 4 Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S 2020-24
- Porsche 9J1.1 Taycan 4S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S Sport Turismo 2020-24
- Porsche 9J1.1 Taycan GTS 2020-24
- Porsche 9J1.1 Taycan GTS Sport Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo 2020-24
- Porsche 9J1.1 Taycan Turbo Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo Sport Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S 2020-24
- Porsche 9J1.1 Taycan Turbo S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S Sport Turismo 2020-24
- Porsche 9J1.2 Taycan Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Sport Turismo 2024>>
- Porsche 9J1.2 Taycan 4 Cross Turismo 2024>>
- Porsche 9J1.2 Taycan 4S Sport Saloon 2024>>
- Porsche 9J1.2 Taycan 4S Sport Turismo 2024>>
- Porsche 9J1.2 Taycan 4S Cross Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo GT Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo GT with Weissach Package Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo Sport Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo Cross Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo S Sport Saloon 2024>>
- Porsche 9J1.2 Taycan Turbo S Sport Turismo 2024>>
- Porsche 9J1.2 Taycan Turbo S Cross Turismo 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=200&height=150&quality=65&format=webp "Lower Front Control Arm Bushing Left / Right (FRONT). Porsche 970 Panamera 2010-13 - 97034105304, 97034105404, 97034105403")
The Lower Front Control Arm Bushing (Front, Left / Right) is a high-quality suspension mounting bushing designed to restore correct fitment and controlled movement of the front lower control arm on compatible Porsche models. Installed at the front mounting position of the lower control arm, this bushing supports proper suspension articulation while absorbing vibration and road shock for improved comfort and stability.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
Fits On To Diagram Ref No 1
Front control arm bushings play a key role in maintaining correct suspension geometry and wheel alignment, helping the vehicle remain stable under braking, acceleration, and cornering. Over time, bushings can harden, crack, or deform due to age, heat, and repeated load cycles. Worn bushings may cause clunking noises, steering instability, vibration, and uneven tyre wear.
What This Product Does:
- Secure the front lower control arms to the vehicle’s subframe or chassis
- Provide controlled flexibility for suspension movement
- Absorb vibration and road shock for a smoother ride
- Maintain correct suspension geometry and wheel alignment
- Help keep steering response predictable and stable
Symptoms Of A Worn Or Failed Bush:
Noise & Comfort Issues
- Clunking or knocking sounds from the front suspension over bumps
- Rattles or vibration from the chassis area
- Harsh or unsettled ride quality
Handling & Steering Changes
- Loose or sloppy steering feel
- Wandering or pulling at speed
- Front end instability under braking or cornering
- Uneven tyre wear
Visual / Physical Signs
- Rubber material that appears cracked, split, or deformed
- Excessive play when the control arm is manipulated by hand
- Bushings appearing hardened or deteriorated
Why Replacement Matters:
- New bushings help maintain correct suspension geometry, allowing the wheels and tires to track predictably and respond precisely to steering input.
- Replacing worn bushings reduces vibration and harshness transmitted to the cabin — improving overall comfort and noise isolation.
- Worn bushings allow excess movement that can place additional stress on ball joints, tie rods, and shocks — leading to accelerated wear.
- Correct control arm mounting helps maintain consistent alignment specs; replacing bushings can make it easier to hold alignment settings after suspension work.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105404A
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
Shop Securely
12 Month Warranty
Worldwide Delivery
This is a full suspension anti-roll bar link replacement kit featuring four OE Match drop links for the front and rear suspension of the Porsche 911 964, includes:
1x Front Left Drop Link - OE ref no 96434307101
1x Front Right Drop Link - OE ref no 96434307201
1x Rear Left Drop Link - OE ref no 96433307371
1x Rear Right Drop Link - OE ref no 96433307402
Fits:
Porsche 964 1990 - 1994 all models
Diagram ref no 18.
This product is a set of four OE Match anti-roll bar drop links - two for the front and two for the rear - that connect each stabiliser (anti-roll) bar to their respective suspension arms on the 911 (964). Drop links play a crucial role in the vehicle’s suspension dynamics by transferring lateral loads during cornering and reducing body roll.
The links in this kit ensure the anti-roll bars can effectively resist body roll by transferring forces between the bar and suspension arms. This enhances stability, grip, and handling precision:
• Front drop links (96434307101 & 96434307201): Connect the front stabiliser bar to the front suspension
• Rear drop links (96433307371 & 96433307402): Connect the rear stabiliser bar to the rear suspension
By replacing both front and rear links with OE Match units, you help restore balanced roll resistance across all four corners of the vehicle.
Function:
• Transmits stabiliser bar forces into the suspension arms
• Reduces body roll during cornering
• Improves handling balance and steering precision
• Helps maintain tyre contact and grip
• Supports stable, predictable suspension behaviour at speed
Anti-roll bar drop links endure constant movement, loads, and heat from everyday driving and spirited use. Over time, their joints and bushings can wear or loosen, resulting in:
• Clunking or knocking noises over bumps
• Increased body roll during cornering
• Loose or vague steering feel
• Uneven tyre wear
• Compromised suspension balance.
Replacing both front and rear drop links with a matched OE Match set restores correct stabiliser bar function, helps maintain predictable handling, and provides a more stable and confident driving experience.
When to replace. Install this complete drop link set when:
• You hear suspension noise from either front or rear end
• Handling feels loose or unsettled
• The vehicle exhibits excessive body lean
• You are performing a complete suspension overhaul or alignment
• The original links show visible wear, play, or deterioration
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DROPLINKKIT.964
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
OE Match rear stabiliser bar (anti-roll bar) link set for the Porsche 911 (964) rear suspension. The set includes both left and right rear drop links - OE ref no 96433307371 and 96433307402 - engineered to match the original Porsche components in fit, strength, and function.
SET OF 2 links - for left and right side.
Fits:
Porsche 964 1990 - 1994 all models
Diagram ref no 18.
This product is a pair of OE Match rear drop links - also referred to as rear stabiliser bar links - designed to connect the rear anti-roll bar to the rear suspension arms on the Porsche 911 964.
The kit includes:
• 1x 96433307371 - OE Match rear drop link (one side)
• 1x 96433307402 - OE Match rear drop link (opposite side).
OE Match parts are manufactured to reflect the original dimensions, pivot geometry, and bushing/ball joint specifications so the links install without modification and deliver dependable performance over time.
Rear drop links are pivotal in transmitting forces between the rear anti-roll bar and suspension arms. During cornering, the anti-roll bar resists body roll by sharing load across both sides of the rear suspension. The drop links serve as the connection points that deliver those forces effectively - helping keep the vehicle balanced, stable, and predictable. By facilitating this transfer, the drop links contribute to:
• Reduced body roll on cornering
• Sharper handling and chassis response
• Improved rear wheel contact and grip
• Better stability at speed and under load.
Function:
• Connects stabiliser bar to suspension arms: Ensures anti-roll bar forces are applied correctly
• Reduces body motion: Limiting excessive rear end roll for improved balance
• Improves grip: Promotes consistent tyre contact and traction
• Enhances confidence: More predictable handling in everyday and spirited driving
Rear drop links bear constant loads and movement as the suspension articulates. Over time, the ball joints and bushings in the links can wear or loosen, leading to:
• Clunking or knocking noises from the rear during suspension movement
• Increased body roll and reduced stability in corners
• Loose or vague handling characteristics
• Uneven tyre wear from inconsistent suspension geometry
Replacing both rear drop links at the same time - rather than just one - restores balanced roll control and preserves consistent handling. OE Match parts ensure both sides match the original design for controlled, reliable performance.
When to replace. Install this rear drop link set when:
• You hear noise from the rear suspension under motion
• Handling feels loose, unsettled, or floaty
• You experience excessive body roll in corners
• The links show visible wear or play during inspection
• You’re performing other rear suspension service or upgrades
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96433307X71
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
OE Match complete front anti-roll bar (stabiliser bar) drop link set for Porsche 911 964 C2 and 965 Turbo models. It includes both the left (OE ref no 96434307101) and right (OE ref no 96434307201) front drop links, engineered to match the original Porsche factory parts in fit and function.
SET OF 2 links - for left and right side.
Fits:
Porsche 964 C2 1990 - 1994
Porsche 965 Turbo 1991 - 1994
This product supersedes Porsche's old part numbers:
- 96434307100 (LEFT) / 96434307200 (RIGHT)
Diagram ref no 7
This product is a two-piece OE Match front drop link set used to connect the front stabiliser (anti-roll) bar to the front suspension components on Porsche 911 964 models.
It includes:
• 1x 96434307101 – Left front drop link
• 1x 96434307201 – Right front drop link
OE Match components are precisely engineered to replicate the original Porsche part’s dimensions, joint positioning, and load-bearing characteristics. This makes them a reliable replacement for worn or aging original drop links and restores consistent handling performance.
The front drop links attach the front anti-roll bar to the suspension’s lower control arms or uprights. When the vehicle corners, the stabiliser bar transfers force across the axle. The drop links serve as the connection points that transmit this energy, helping to resist body roll, improve balance, and maintain tyre contact during dynamic driving. Without effective drop links, the anti-roll bar cannot properly stabilise the chassis, which can lead to excessive body lean, vague steering response, and uneven tyre loading.
Function:
• Connects stabiliser bar to suspension: Transfers lateral forces into the chassis
• Reduces body roll: Helps keep the car flat through corners
• Improves handling balance: Enhances steering precision and road stability
• Absorbs movement and vibration: Provides smooth linkage motion through bushings/ball joints
Over time, front drop links can wear from exposure to road shock, heat, and damp conditions. Worn or failing drop links can cause:
• Clunking or knocking noises over bumps
• Loose or “floaty” cornering feel
• Increased body lean and reduced stability
• Uneven tyre wear
• Less precise steering response
Replacing both drop links together restores the intended anti-roll bar performance, improves handling response, and prevents premature wear on other suspension components. OE Match links ensure both sides are renewed to the same specification for balanced performance.
When to replace. Install this drop link set when:
• You hear suspension noise (clunks/knocks) from the front end
• Handling feels less stable or predictable during cornering
• You notice excessive body roll
• The original links show visible wear or play
• You are undertaking front suspension service or rebuild
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96434307X01
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
The Rear Stabilizer Bar Bush (24.70mm) is a high-quality suspension bushing designed to securely mount and support the rear anti-roll (stabilizer/sway) bar on compatible Porsche models, commonly within the Cayenne 955 / 957 platform range. With a 24.70mm internal diameter, this bushing is sized to match the correct stabilizer bar thickness, ensuring proper fitment and stable operation.
Sold In Halves - x4 Required Per Car.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Diagram Ref No 2
Rear stabilizer bar bushes play an important role in reducing body roll during cornering by keeping the anti-roll bar firmly mounted while allowing controlled movement. They also help absorb vibration and isolate road noise for improved ride comfort. Over time, these bushes can harden, crack, or deform due to age, heat, and constant suspension movement, leading to knocking noises over bumps, increased body roll, and reduced handling precision.
What This Product Does:
- Secure the rear stabilizer bar to the vehicle’s subframe/chassis
- Allow controlled movement of the bar while absorbing road shock
- Reduce body lean in corners for greater handling stability
- Minimise noise, vibration, and harshness (NVH) transmitted to the cabin
- Help maintain proper suspension geometry and grip
Symptoms Of Wear Or Failure:
Noise & Harshness
- Clunking or knocking noises from the rear suspension over bumps
- Rattling under acceleration or cornering
- Squeaks at low speeds
Handling Issues
- Noticeable body roll when cornering
- Reduced rear stability at higher speeds
- Loose or vague rear handling feedback
Wear Patterns
- Uneven or accelerated tyre wear
- Difficulty maintaining alignment
- Bushes that appear cracked, split, or deformed during inspection
Why Replacement Matters:
Restore Handling Precision
New bushes keep the stabilizer bar tightly mounted, improving cornering response and rear grip.
Improve Ride Comfort
Fresh bushes absorb vibration and isolate NVH better than old, hardened ones.
Eliminate Unwanted Noise
Replacing degraded bushes reduces clunking and suspension noises.
Protect Suspension Components
Correctly functioning bushes reduce stress on related links and mounts, preventing premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533379230
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
Fits:
Porsche 955 Cayenne 2003-06 (I0AB)
Porsche 957 Cayenne 2007-10 (I0AB)
Porsche 958 Cayenne 2011>> (I0AB/I0AC)
Click 'Zoom in' for large parts diagram.
Diagram ref no 2, 5, 6, 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534306900
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed