do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a specialist replacement-parts brand developed around Porsche applications, covering routine maintenance, mechanical repairs, restoration and difficult-to-source components for classic and modern models. Design911 selects brands for quality and Porsche fitment, with knowledgeable specialists available to help owners and workshops choose suitable parts.
The OE Match story
OE Match is focused on preserving Porsche vehicles by returning hard-to-find and no-longer-available components to the market. Its purpose is to keep Porsche vehicles maintained, repaired, restored and usable for the future, particularly where original components have become expensive, difficult to source or discontinued.
Supplied catalogue information records over 8000 individual part numbers, more than 11,800 OE cross-references and over 100 new products in engineering, while the wider product programme contains more than 9,000 variants; these figures describe different measures of the range. Continuing development involves researching the parts owners and workshops genuinely need, working with specialist manufacturers, reviewing engineering specifications, assessing samples, testing and approving components before release. From small seals, clips and brackets to major mechanical components, the aim is to prevent a difficult-to-source item from holding up an entire repair or restoration: preserving Porsche, one part at a time.
Why choose OE Match for your Porsche
OE Match is a quality aftermarket and OE-equivalent replacement option developed specifically around Porsche applications rather than adapted from a general aftermarket range. Original references, vehicle fitment information, dimensions, materials and component specifications are used to identify suitable replacements for routine service, age-related wear, larger mechanical repairs and restoration work.
Its research, development and quality-control processes assess material and manufacturing quality, dimensions and specification, OE-reference compatibility, vehicle application, fit and function, supplier samples, product consistency, packaging and presentation. Where appropriate, physical inspection and fitment evaluation form part of final approval, and products must meet the programme's requirements before entering the catalogue.
Coverage includes the Porsche 356, 911, 912, 914, 924, 944 and 928, alongside the 964, 993, Boxster 986, 996, Cayenne, Cayman and 997. This gives owners, enthusiasts, independent specialists and professional workshops a Porsche-focused replacement option alongside Genuine Porsche parts. OE Match is intended to provide correctly specified, OE-equivalent replacements with sensible running costs rather than simply serving as a lower-cost alternative. Design911 selects the brands it carries for quality and fitment and can advise customers on suitable options for maintenance, restoration or upgrades.
- A replacement-parts programme developed specifically around Porsche applications.
- More than 9,000 product variants within the wider programme.
- Original Porsche part-number cross-references wherever applicable.
- Dedicated research, development, sample evaluation and quality-control processes.
- Classic and modern Porsche coverage for maintenance, repairs and restoration.
- Development focused on difficult-to-source and discontinued applications.
Categories we stock from this brand
Design911 stocks OE Match across an extensive range of Porsche mechanical, electrical, body, interior and maintenance categories. Original Porsche references help identify replacements where part numbers have been superseded or several versions exist. Always check the model, production year, engine, transmission, side or position, connector type where relevant and individual product notes. Incorrect application, mismatched versions, reused seals or hardware and worn supporting components can cause noise, premature wear, leaks, fitment problems or repeat failures. Safety-critical specifications and installation should be checked by a competent technician.
Engine components
OE Match engine coverage supports maintenance, repair and rebuilding work, ranging from small retaining hardware and brackets to components associated with the cylinder heads, crankcase, valve train and supporting engine systems.
- Confirm the engine type, capacity, production year and original reference.
- Inspect associated seals, fasteners and supporting components during engine work.
- Check whether components require specialist measuring, machining or installation procedures.
Engine seals and gaskets
Replacement seals and gaskets help address oil, coolant, air and vacuum leaks throughout classic and modern Porsche engines. The range supports individual repairs as well as more extensive engine resealing and rebuilding projects.
- Identify the source of a leak before replacing components.
- Check mating surfaces, housings and fasteners for wear or damage.
- Use the correct gasket or seal version for the engine and production year.
Cooling systems and radiators
OE Match cooling-system coverage includes components used to circulate coolant, control temperature and transfer heat away from the engine. These parts support repairs involving radiators, pipework, hoses, fittings and related cooling hardware.
- Investigate coolant loss, overheating, staining and damaged hoses promptly.
- Check pressure caps, clips, seals and connecting pipes during cooling-system work.
- Bleed and refill the system using the correct model-specific procedure.
Oil system components
Oil-system parts support engine lubrication, oil circulation, filtration and leak repair. Coverage can assist with routine servicing as well as work on oil lines, fittings, housings, seals and associated hardware.
- Confirm thread sizes, connection types and component position.
- Inspect flexible lines and seals for age-related hardening or leakage.
- Verify the required oil specification and system capacity separately.
Transmission and drivetrain
OE Match transmission and drivetrain parts support manual and automatic gearbox repairs, clutch operation, gear selection and the transfer of power to the driven wheels.
- Match parts to the exact gearbox or transmission code where specified.
- Check splines, bearings, seals, joints and supporting hardware for related wear.
- Diagnose noise, vibration or difficult gear selection before ordering components.
Engine and gearbox mounts
Replacement mounts help support the powertrain, maintain alignment and control unwanted engine and transmission movement. Worn mounts may contribute to vibration, knocking, drivetrain shunt or unsettled gear changes.
- Inspect mounts for cracking, collapse, separation and oil contamination.
- Check mounting bolts, washers, brackets and surrounding hardware.
- Consider replacing paired mounts together where required by the application.
Suspension and steering
OE Match suspension hardware and steering components support repairs intended to restore accurate wheel control, alignment and predictable steering response. Coverage includes wear-related items used around suspension joints, mounting points and steering assemblies.
- Investigate play, knocking, uneven tyre wear and unstable handling.
- Check left- and right-hand applications and axle position carefully.
- Arrange wheel alignment after replacing components that affect geometry.
Braking components
OE Match braking components form part of its Porsche-specific replacement programme. Brake work may address wear, restore stopping performance or prepare a car for fast-road or track use, but the specification of each component must suit the intended application.
- Symptoms prompting inspection include vibration, longer stopping distances, squealing, pulling to one side, warning lights and visible disc or pad wear.
- Confirm whether the selected component is an OE-equivalent replacement or a performance upgrade.
- Check whether new fitting kits, seals, hardware and pad wear sensors are required.
Electrical and ignition
Electrical and ignition coverage supports Porsche repairs involving starting, charging, ignition and engine-management faults. Correct diagnosis is particularly important because wiring, supply voltage, earth connections and other supporting components can produce similar symptoms.
- Typical symptoms include intermittent no-start, misfires, rough idle, poor charging, warning lights and heat-soak failures.
- Check the original reference, engine, production year and connector type.
- Test power supplies, earths and wiring before replacing electrical components.
Sensors and switches
OE Match sensors and switches provide replacement options for systems that monitor or control engine operation, temperature, pressure, position, lighting and driver warnings.
- Similar-looking sensors may have different calibrations, connectors or applications.
- Use fault codes as a diagnostic guide rather than proof that a sensor has failed.
- Inspect connectors for corrosion, damaged terminals and degraded wiring.
Heating and air conditioning
Heating, ventilation and air-conditioning components support cabin temperature control, airflow and demisting. The range covers replacement needs involving blower assemblies, controls, ducts, valves, fittings and related hardware.
- Check whether parts differ between left- and right-hand-drive vehicles.
- Confirm connector, housing and production-year variations.
- Refrigerant-system work should be completed by an appropriately qualified technician.
Exhaust components
OE Match exhaust coverage supports repairs to worn, corroded or leaking parts of the exhaust system, together with associated brackets, clamps, seals and fittings.
- Inspect joints, flanges, fixings and heat shields when replacing exhaust parts.
- Check emissions equipment and sensor positions for the specific model.
- Corroded fasteners may require additional hardware during installation.
Rubber seals and hoses
Rubber components are important throughout a Porsche for sealing fluids, air, weather and noise. OE Match coverage assists with replacing hardened, split, swollen, leaking or missing hoses, boots, grommets and sealing profiles.
- Match the shape, dimensions, connection points and intended fluid or system.
- Inspect adjoining clips, pipes and sealing surfaces.
- Age-related rubber deterioration can affect several nearby components at once.
Exterior trim and body components
Exterior and body coverage supports accident repair, cosmetic refurbishment and restoration. It includes replacement needs involving trim, lamps, brackets, fixings, seals and other model-specific body fittings.
- Confirm body style, side, position, colour and finish where applicable.
- Check whether clips, seals or mounting hardware are supplied separately.
- Compare the original component and reference before installation.
Interior components
OE Match interior products support the repair and restoration of cabin fittings that may have worn, faded, broken or become difficult to source with age.
- Check colour, finish, side and model-year variations.
- Inspect clips, brackets and fixing points before fitting replacement trim.
- Some interior components may differ according to body style or equipment specification.
Service and maintenance parts
OE Match service components support scheduled upkeep across Porsche generations, helping owners and workshops maintain reliability, efficiency and system protection while addressing everyday wear.
- Hard starting, rough idle, poor fuel economy and warning lights can accompany clogged filters or worn ignition components.
- Select service items against the exact Porsche model, engine, production year and required specification.
- Review related seals, hardware and other maintenance items when planning a larger service.
Restoration hardware
Restoration hardware covers the small but essential fasteners, brackets, clips, fittings and retaining components needed to complete repairs accurately and securely.
- Record the position and orientation of original hardware during dismantling.
- Check thread, length, finish, quantity and model application.
- Replacing damaged or heavily corroded hardware can prevent delays during reassembly.
Difficult-to-source and discontinued applications
A central purpose of the OE Match programme is identifying gaps where original Porsche parts have become difficult to obtain or are no longer available. Reintroduced components can help prevent one missing seal, clip, bracket or mechanical part from delaying an otherwise complete repair or restoration.
- Use OE cross-references and dimensions to verify the intended application.
- Check whether the original number has been superseded.
- Review product-specific fitment notes where several component versions exist.
Brake Pad Wear Sensors
OE Match brake pad wear sensors provide replacement options for Porsche brake servicing. Sensors may need renewal when pads are replaced or when a worn or damaged sensor causes a brake wear warning.
- Warning messages with new pads, damaged sensor cables and broken clips warrant inspection.
- Match the OE reference, caliper application, model year, connector and sensor position.
- Check the quantity required and whether sensors are included with the selected brake parts.
Engine Electrical
OE Match engine electrical parts cover starting, charging, ignition, sensor and switch applications. They support repairs involving intermittent no-start, misfires, rough idle, stalling, battery drain, poor charging, warning lights, inconsistent readings and heat-related failures.
- Similar-looking components may have different electrical or vehicle applications.
- Repeat faults can indicate a mismatched component or a worn supporting item.
- Battery condition, earth straps, connectors and voltage drop should be checked during diagnosis.
Service Parts
OE Match service parts cover everyday maintenance requirements intended to protect the engine, gearbox and other major systems. Routine replacement can address natural wear caused by heat, friction, fluid degradation and environmental exposure.
- Match filters, ignition parts, belts and fluids to the exact vehicle specification.
- Many symptoms overlap, so establishing a sound service baseline can assist diagnosis.
- Keep a service record to support future maintenance and fault finding.
Service Kits
OE Match service kits group key maintenance components to simplify servicing and establish a known baseline. They are particularly useful when catching up on overdue maintenance or assessing sluggish running, inconsistent idle, poor economy and reduced performance.
- Match each kit to the exact Porsche model, engine and production year.
- Contents vary, so review the included components rather than assuming every service item is supplied.
- Add any required while-you-are-there items, such as spark plugs, belts, fluids, seals or hardware.
Explore the range
Browse the OE Match Porsche range at Design911, then narrow your selection by model and category and cross-check the original part references and fitment notes. Whether you are planning routine maintenance, a workshop repair or a complete restoration, Design911's Porsche specialists can help identify suitable components within a programme focused on fitment, quality and long-term vehicle preservation.
.jpg?width=200&height=150&quality=65&format=webp "Front Anti-Roll Bar Link Bushing (UPPER / LOWER). Porsche 955 / 957 / 958 Cayenne 2003-17 - 95534306900, 7L0411317 - TED10693")
The Front Anti-Roll Bar Link Bushing (Upper / Lower) is a high-quality suspension bushing set designed to restore correct fitment and controlled movement at the front stabilizer (anti-roll/sway) bar link mounting points on compatible Porsche models, commonly within the Cayenne 955 / 957 / 958 platform range. These bushings sit at the upper and lower ends of the anti-roll bar link, providing a cushioned connection between the stabilizer bar and the suspension components.
Sold Each.
x4 Required Per Car.
Fits:
Porsche 955 Cayenne 3.2L V6 2003-06
Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06
Porsche 955 Cayenne Turbo S 4.5L 2006>>
Porsche 957 Cayenne 3.0L Diesel 2007-10
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne S/GTS 4.8L 2007-10
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Fits On To Diagram Ref No 5
Anti-roll bar link bushings play an important role in maintaining stable handling by allowing the stabilizer bar to transfer forces between the left and right suspension, helping reduce body roll during cornering. Over time, bushings can harden, crack, or deform due to age, road conditions, and repeated suspension load. Worn bushings may cause knocking noises over bumps, increased vibration, and reduced handling precision.
What This Product Does:
- Provide a cushioned mounting point for anti-roll bar links
- Help the anti-roll bar transfer forces between left and right suspension
- Reduce body roll in corners, improving stability and handling
- Isolate road noise and vibration from the cabin
- Maintain correct front suspension geometry under load
Symptoms Of A Worn Or Failed Bush:
Noise & Comfort Issues
- Clunking or knocking noises over bumps or during steering
- Rattling from the front suspension area
- Buzzing or vibration through the dash/floor
Handling & Stability Changes
- Increased body lean in corners
- Loose or sloppy steering feel
- Reduced confidence in quick direction changes
Wear/Visual Indicators
- Visible cracks, splits, or deformation in the bushing material
- Excessive movement at the sway bar link ends when tested
- Bushings that appear flattened, hard, or deteriorated
Why Replacement Matters:
- New anti-roll bar link bushings keep the sway bar tightly connected to the suspension, helping reduce body roll and improve front-end grip and balance.
- Worn bushings transmit more impact and vibration into the cabin; new ones isolate noise and improve smoothness.
- Clunking and rattling caused by worn or loose bushings are resolved with proper OE-match replacements.
- Loose anti-roll bar links can place unnatural loads on control arms, ball joints, and mounting points, leading to premature wear of more expensive components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534306900A
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
PACK OF 10
Fits in Various models
Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2 / C4 1998-05
Porsche 996 GT3 MKI
Porsche 996 GT3 MKII
Porsche 996 GT3 RS
Porsche 996 GT3 MKII
Porsche 997
Porsche Boxster 987
Click picture for large parts diagram.
Diagram Ref No 18.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970743441
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
.jpg?width=200&height=150&quality=65&format=webp "Rear Shock Absorber Bushing (LOWER). Porsche 955 / 957 Cayenne 2003-10 - 95533305100, 95533305101, 95533305111, 95533305112, 95533305130, 95533305131, 95533305140, 95533305141, 95533305150, 95533305151 - TED99923")
The Rear Shock Absorber Bushing (Lower) is a high-quality suspension mounting bushing designed to restore correct fitment and isolation at the lower mounting point of the rear shock absorber on compatible Porsche models, commonly within the Cayenne 955 / 957 platform range. This bushing sits between the shock absorber and its lower mounting bracket, providing a cushioned interface that reduces vibration and prevents metal-to-metal contact during suspension movement.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
Fits On To Diagram Ref No 17
Lower shock absorber bushings play an important role in maintaining ride comfort and stable damping performance by allowing the shock to move smoothly through its travel while keeping the mounting point secure and correctly aligned. Over time, the bushing material can wear, harden, crack, or deform due to age, heat, and repeated load cycles. A worn bushing may cause knocking noises over bumps, increased vibration, and reduced suspension control.
What This Product Does:
- Absorbs vibration and shock loads from the rear suspension
- Provides a quiet mounting point for the lower shock absorber end
- Helps maintain correct shock absorber alignment and movement
- Reduces noise, harshness, and vibration (NVH) transmitted into the cabin
- Allows controlled suspension travel while maintaining damping performance
Symptoms Of A Worn Or Failed Rear Shock Absorber Lower Bushing:
Noise & Comfort Issues
- Clunking, knocking, or thudding sounds from the rear when going over bumps
- Increased vibration or harshness felt in the cabin
- Rattling noises from the rear suspension area
Handling & Ride Quality
- Poor shock absorber response
- Felt “loose” or uncontrolled rear suspension
- Reduced ability to absorb impacts smoothly
Visual & Physical Signs
- Cracks, splits, or tears in the bushing material
- Visible deformation or hardening of the rubber/urethane
- Excessive play at the shock lower mount when inspected
Why Replacement Matters:
- New bushings absorb and isolate impacts far better than old, hardened ones—resulting in a smoother, quieter ride.
- Properly mounted shock absorbers respond more consistently to road inputs, enhancing stability during acceleration, braking, and cornering.
- Replacing worn lower shock bushes eliminates clunking and vibration that occur when metal interfaces directly due to degraded isolators.
- Excessive movement due to worn bushes can place extra stress on shock bodies, mounts, and linkage components—shortening their service life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533305100A
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=200&height=150&quality=65&format=webp "Stabilizer Bar Bush Rear 23.70mm. Porsche 955 / 957 / 958 Cayenne 2003-17 - 95533379250 - TED10667")
The Rear Stabilizer Bar Bush (23.70mm) is a high-quality suspension bushing designed to securely mount and support the rear anti-roll bar (stabilizer bar) on compatible Porsche models, commonly the Porsche Cayenne platform. This bushing cushions the stabilizer bar where it mounts to the chassis, allowing controlled movement while reducing vibration and road noise.
Sold As Single Half - x4 Required Per Car.
Fits:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Diagram Ref No 2
The stabilizer bar plays an important role in reducing body roll during cornering and improving overall vehicle stability. Over time, stabilizer bar bushes can wear, harden, or crack due to age, heat, and constant suspension movement. Worn bushes may cause knocking noises over bumps, increased body roll, and less precise handling.
What This Product Does:
- Supports the rear stabilizer bar by mounting it to the chassis
- Reduces body lean during cornering, improving stability
- Allows controlled bar movement while dampening vibration
- Isolates road noise and harshness from the cabin
- Helps maintain rear suspension geometry
Symptoms Of A Worn Or Failed Stabilizer Bush:
Handling & Stability Issues
- Excessive body roll in corners
- Reduced rear stability at speed
- Less precise steering feel
Noise & Vibration
- Clunking, knocking, or rattling from the rear suspension
- Noise when driving over bumps or uneven surfaces
Wear & Tear Patterns
- Accelerated wear of related suspension parts
- Play or movement at the stabilizer bar mounting points
Visual Signs
- Cracks, splits, or deformation in the rubber bushing
- Bushings appear flattened or deteriorated
Why Replacement Matters:
- Healthy bushings keep the stabilizer bar tight and responsive, reducing body lean and improving turn-in stability.
- New bushings absorb vibration and isolate noise more effectively than old, hardened ones, resulting in a smoother ride.
- Replacing worn bushings eliminates clunking and rattling caused by excessive play in the stabilizer bar mount.
- Proper anti-roll bar support reduces stress on control arms, links, and shocks by controlling force distribution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533379250
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=200&height=150&quality=65&format=webp "Rear Lower Track Rod Bushing - FRONT (INNER / OUTER). Porsche 95B Macan 2014>> - 8K0501529L, PAB501529B - 00056559")
The Rear Lower Track Rod Bushing – Front (Inner / Outer) is a high-quality suspension bushing designed to restore correct mounting and controlled movement of the rear lower track rod (toe link) on compatible Porsche vehicles. Installed at the front mounting position of the rear lower track rod, this bushing is used at the inner and outer connection points to maintain proper suspension geometry and stable rear wheel alignment.
Sold Each.
x4 Required Per Car.
Fits:
- Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 258Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 380Bhp 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 440Bhp 2019-21
- Porsche 95B.3 Macan Petrol 2.0L 265Bhp 2022>>
- Porsche 95B.3 Macan T Petrol 2.0L 265Bhp 2022>>
- Porsche 95B.3 Macan S Petrol 2.9L V6 380Bhp 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 440Bhp 2022>>
Fits On To Diagram Ref No 11
Track rod bushings play a key role in controlling rear toe settings, helping keep the vehicle stable under braking, acceleration, and cornering. Over time, the bushing material can wear, crack, or soften due to age, heat, and constant suspension movement. A worn bushing may lead to rear-end instability, knocking noises, vibration, and uneven tyre wear caused by shifting alignment under load.
What This Product Does:
- Absorbing road vibration and shocks from the rear suspension
- Maintaining suspension alignment and rear wheel toe control
- Providing a flexible mount that allows controlled movement
- Isolating noise and harshness from the cabin
- Helping ensure consistent handling under load (cornering, braking)
Symptoms Of A Worn Or Failed Bushing:
Handling & Stability Changes
- Rear end wander or unsettled feel at speed
- Pulling to one side under braking
- Loose, imprecise steering response
- Poor turn-in or inconsistent feel over bumps
Noise & Vibration
- Clunking, knocking, or creaking from rear suspension when accelerating, braking, or cornering
- Increased vibration transmitted into the cabin
- Rattles from rear suspension components
Wear Patterns
- Uneven or accelerated rear tyre wear
- Alignment that drifts or doesn’t stay within spec
- Rear toe variation during alignment checks
Physical Signs
- Visible cracks, splits, or deformation in the rubber material
- Excessive movement of the track rod when manipulated by hand
- Noise/right-side bias while driving
Why Replacement Matters:
- These bushings help maintain accurate rear wheel alignment, especially rear toe settings, which are crucial for stable handling and tyre life.
- Worn bushings create play in the suspension, leading to sloppy handling and unpredictable responses in turns, acceleration, and braking.
- New bushings absorb vibration and noise more effectively than old, hardened ones.
- Loose suspension control can accelerate wear on other components like tyres, bearings, and joints.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB501529BA
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
This OE Match rear window wiper arm is a high-quality replacement part designed to match the original Porsche rear wiper arm in fit, function, and durability. It is engineered as a direct-fit alternative to the factory component for rear windshield wiping systems on select Porsche models.
Fits:
Porsche 95B.1 Macan 2014 - 2018
Porsche 95B.2 Macan 2019 - 2021
Porsche 95B.3 Macan 2021 >>
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016
Porsche 971.1 Panamera 2017 - 2021 Sport Sedan (K8S)
Porsche 971.2 Panamera 2021 - 2023 Sport Sedan (K8S)
Diagram ref no 3
The rear wiper arm supports the rear wiper blade and allows it to sweep across the rear window to remove water, snow, dirt, and debris. This action helps maintain clear rear visibility - especially during rain, snow, or after driving through wet or muddy conditions. Designed to work smoothly with the rear wiper motor, the OE Match arm ensures consistent contact pressure and accurate movement throughout its sweep pattern.
Function:
• Secures the rear wiper blade to the wiper mechanism
• Transfers motion from the rear wiper motor to the blade
• Maintains constant blade contact with the rear glass surface
• Delivers smooth, reliable wiping action
• Prolongs blade life by ensuring even pressure and motion
A properly functioning rear wiper arm is crucial for maintaining rear visibility and safety, particularly on vehicles with large rear glass areas like SUVs, hatchbacks, and fastbacks.
Over time, the rear wiper arm may wear, corrode, or lose tension, compromising blade contact and reducing visibility in wet weather. A worn or bent arm can cause streaking, skipping, or incomplete wiping patterns. Replacing it with a high-quality OE Match unit restores proper blade engagement, enhances rear visibility, and supports safer driving conditions.
When to replace. Upgrade or replace the OE Match rear wiper arm if:
• The arm fails to hold the blade firmly against the glass
• Wiping action skips, streaks, or misses areas
• The arm is bent, corroded, or loose at the pivot
• You have replaced the blade but performance does not improve
• Rear visibility problems recur, especially in rain or road spray
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
971955707A
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
- Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
The Rear Lower Control Arm Bushing (REAR) is a high-quality suspension bushing designed to restore correct mounting and controlled movement of the rear lower control arm on compatible Porsche vehicles. This bushing sits between the control arm and the chassis/subframe, acting as a flexible joint that absorbs road vibration while allowing the suspension to articulate smoothly under braking, acceleration, and cornering loads.
Sold Each, x2 Required Per Car.
Fits:
Porsche 95B.1 Macan 2014 - 2018
Porsche 95B.2 Macan 2019 - 2021
Porsche 95B.3 Macan 2022 >>
Fist inside middle of number 1 on diagram (marked in green)
Over time, suspension bushings can deteriorate due to age, heat, road contamination, and repeated flexing. A worn rear lower control arm bushing can lead to clunking noises, unstable handling, uneven tyre wear, and difficulty maintaining proper wheel alignment. Replacing the bushing helps return suspension geometry to factory condition, improving comfort, stability, and overall driving confidence.
What This Product Does:
- Acts as the pivot point between the rear lower control arm and subframe
- Absorbs vibration and road shock for a smoother ride
- Maintains correct suspension geometry and alignment
- Helps control wheel movement under load (acceleration, braking, cornering)
- Reduces noise, harshness, and vibration transmitted to the cabin
Symptoms Of Worn Or Failed Rear Lower Control Arm Bushing:
Noise & Vibration
- Clunking, creaking, or knocking over bumps
- Vibration through the floor or rear of the vehicle
Handling & Stability Issues
- Wandering or unstable rear end
- Poor cornering response
- Braking pull or imbalance
Wear & Alignment Problems
- Uneven or accelerated tyre wear
- Difficulty holding a wheel alignment
- Rear end “floaty” feel at speed
Visual/Physical Signs
- Cracks, splits, or visible degradation of the rubber material
- Play or movement at the bushing when pushed/pulled
Why Replacement Matters:
- Worn bushings allow uncontrolled movement in the suspension, which degrades stability, steering feel, and driver confidence—especially in corners or sudden manoeuvres.
- Proper bushings help maintain wheel alignment under load, reducing uneven tyre wear and extending tyre life.
- New bushings absorb shock and vibration more effectively, reducing harshness and noise transmitted to the cabin.
- Controlling unwanted movement helps prevent premature wear of control arms, ball joints, and other suspension parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8R0505311FR
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=200&height=150&quality=65&format=webp "Rear Lower Control Arm Bushing (FRONT). Porsche 95B Macan 2014>> - 8R0505311F, 8R0505312F - 00056422")
The Rear Lower Control Arm Bushing (FRONT) is a high-quality suspension bushing designed to restore correct mounting and controlled movement of the rear lower control arm on compatible Porsche vehicles. This bushing sits between the control arm and the chassis/subframe, acting as a flexible joint that absorbs road vibration while allowing the suspension to articulate smoothly under braking, acceleration, and cornering loads.
Sold Each, x2 Required Per Car.
Fits:
Porsche 95B.1 Macan 2014 - 2018
Porsche 95B.2 Macan 2019 - 2021
Porsche 95B.3 Macan 2022 >>
Fist inside middle of number 1 on diagram (marked in green)
Over time, suspension bushings can deteriorate due to age, heat, road contamination, and repeated flexing. A worn rear lower control arm bushing can lead to clunking noises, unstable handling, uneven tyre wear, and difficulty maintaining proper wheel alignment. Replacing the bushing helps return suspension geometry to factory condition, improving comfort, stability, and overall driving confidence.
What This Product Does:
- Acts as the pivot point between the rear lower control arm and subframe
- Absorbs vibration and road shock for a smoother ride
- Maintains correct suspension geometry and alignment
- Helps control wheel movement under load (acceleration, braking, cornering)
- Reduces noise, harshness, and vibration transmitted to the cabin
Symptoms Of Worn Or Failed Rear Lower Control Arm Bushing:
Noise & Vibration
- Clunking, creaking, or knocking over bumps
- Vibration through the floor or rear of the vehicle
Handling & Stability Issues
- Wandering or unstable rear end
- Poor cornering response
- Braking pull or imbalance
Wear & Alignment Problems
- Uneven or accelerated tyre wear
- Difficulty holding a wheel alignment
- Rear end “floaty” feel at speed
Visual/Physical Signs
- Cracks, splits, or visible degradation of the rubber material
- Play or movement at the bushing when pushed/pulled
Why Replacement Matters:
- Worn bushings allow uncontrolled movement in the suspension, which degrades stability, steering feel, and driver confidence—especially in corners or sudden manoeuvres.
- Proper bushings help maintain wheel alignment under load, reducing uneven tyre wear and extending tyre life.
- New bushings absorb shock and vibration more effectively, reducing harshness and noise transmitted to the cabin.
- Controlling unwanted movement helps prevent premature wear of control arms, ball joints, and other suspension parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8R0505311FF
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match engine oil heat exchanger (sometimes called an oil cooler or oil-to-coolant heat exchanger) - is a precision-engineered cooling component designed to help regulate engine oil temperature by transferring heat between the engine oil circuit and the engine coolant.
Fits:
Porsche 958 Cayenne V6 3.6L 2015 - 2018
Porsche 958 Cayenne S / GTS / TURBBO 4.8L 2011- 2018
Porsche 970 Panamera V6 3.6L 2010 - 2016
Porsche 970 Panamera S / GTS / TURBO 4.8L 2011 - 2016
Diagram ref no 5, 6, 7
The engine oil heat exchanger facilitates thermal management of the engine oil by using the engine’s coolant flow to remove excess heat from the oil. This helps:
• Maintain stable oil temperatures during normal and strenuous engine operation
• Reduce oil degradation caused by overheating
• Support consistent oil viscosity for effective lubrication
• Improve long-term engine component longevity.
By dissipating heat from the oil into the coolant, the heat exchanger helps prevent oil temperatures from rising excessively - which is particularly important in high-load, high-ambient-temperature, or spirited driving conditions.
Function:
• Transfers heat from circulating engine oil to the coolant
• Supports optimal oil temperature to preserve lubrication properties
• Prevents oil overheating, which can accelerate wear
• Works as an integrated part of the engine’s cooling and lubrication systems.
Without a functioning oil heat exchanger, engine oil can run hotter than ideal - increasing the risk of reduced oil life, compromised lubrication, and premature engine wear.
The engine oil heat exchanger plays a critical role in managing engine lubrication temperatures. Over time, the heat exchanger can become clogged, corroded, or develop internal leaks between oil and coolant circuits. A failing heat exchanger can lead to:
• Elevated oil temperatures
• Reduced oil life
• Loss of coolant or oil cross-contamination
• Engine lubrication breakdown
• Overheating or degraded performance.
Replacing a worn or failed heat exchanger with a quality OE Match unit restores effective oil cooling, enhances engine reliability, and helps ensure long-term protection of pistons, bearings, and other vital components.
When to replace. Replace the engine oil heat exchanger when:
• Oil temperature readings are unusually high
• Coolant contamination in the oil (or vice-versa) is suspected
• Visible leaks from the heat exchanger or its connections
• You are performing a major engine service or overhaul
• Signs of corrosion, blockage, or thermal inefficiency are present
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810728122
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
OE Match engine oil heat exchanger (sometimes called an oil cooler or oil-to-coolant heat exchanger) - is a precision-engineered cooling component designed to help regulate engine oil temperature by transferring heat between the engine oil circuit and the engine coolant.
Fits:
Porsche 958 Cayenne V6 3.6L 2015 - 2018
Porsche 958 Cayenne S / GTS / TURBBO 4.8L 2011- 2018
Porsche 970 Panamera V6 3.6L 2010 - 2016
Porsche 970 Panamera S / GTS / TURBO 4.8L 2011 - 2016
Diagram ref no 5
The engine oil heat exchanger facilitates thermal management of the engine oil by using the engine’s coolant flow to remove excess heat from the oil. This helps:
• Maintain stable oil temperatures during normal and strenuous engine operation
• Reduce oil degradation caused by overheating
• Support consistent oil viscosity for effective lubrication
• Improve long-term engine component longevity.
By dissipating heat from the oil into the coolant, the heat exchanger helps prevent oil temperatures from rising excessively - which is particularly important in high-load, high-ambient-temperature, or spirited driving conditions.
Function:
• Transfers heat from circulating engine oil to the coolant
• Supports optimal oil temperature to preserve lubrication properties
• Prevents oil overheating, which can accelerate wear
• Works as an integrated part of the engine’s cooling and lubrication systems.
Without a functioning oil heat exchanger, engine oil can run hotter than ideal - increasing the risk of reduced oil life, compromised lubrication, and premature engine wear.
The engine oil heat exchanger plays a critical role in managing engine lubrication temperatures. Over time, the heat exchanger can become clogged, corroded, or develop internal leaks between oil and coolant circuits. A failing heat exchanger can lead to:
• Elevated oil temperatures
• Reduced oil life
• Loss of coolant or oil cross-contamination
• Engine lubrication breakdown
• Overheating or degraded performance.
Replacing a worn or failed heat exchanger with a quality OE Match unit restores effective oil cooling, enhances engine reliability, and helps ensure long-term protection of pistons, bearings, and other vital components.
When to replace. Replace the engine oil heat exchanger when:
• Oil temperature readings are unusually high
• Coolant contamination in the oil (or vice-versa) is suspected
• Visible leaks from the heat exchanger or its connections
• You are performing a major engine service or overhaul
• Signs of corrosion, blockage, or thermal inefficiency are present
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810728122
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Shop Securely
12 Month Warranty
Worldwide Delivery
The Prop Shaft Support (Bearing Only) is a high-quality replacement centre support bearing designed to restore proper support and alignment of the vehicle’s propeller shaft (driveshaft). This bearing is a critical driveline component that helps stabilise the prop shaft as it rotates, reducing unwanted movement, vibration, and noise during acceleration and cruising.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Fits On To Diagram Ref No 4
Over time, the prop shaft support bearing can wear due to age, constant rotational load, and drivetrain stress. A worn bearing may lead to rumbling noises, vibration through the cabin floor, or knocking sounds under load changes. If left unresolved, excessive prop shaft movement can place additional strain on couplings, joints, and other driveline components.
What This Product Does:
- Supports the prop shaft to prevent excessive movement
- Maintains correct shaft alignment during rotation
- Reduces drivetrain vibration and noise
- Helps ensure smooth power delivery from gearbox to differential
- Protects surrounding driveline components from excess strain
Symptoms Of A Failing Prop Shaft Support Bearing:
- Vibration through the floor, especially under acceleration
- Driveline rumbling or humming noises
- Thumping/knocking sounds when pulling away or changing load
- Shuddering at certain speeds
- Excessive movement in the prop shaft when inspected
- Premature wear on CV joints or couplings due to misalignment
Why Replacement Matters:
- Restore smooth, vibration-free driveline performance
- Prevent further damage to the prop shaft, couplings, or CV joints
- Improve driving comfort and reduce noise
- Maintain safe, reliable drivetrain operation
- Avoid costly repairs caused by prolonged driveline misalignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95542102015A
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Shop Securely
12 Month Warranty
Worldwide Delivery
Sold Each, x 2 Required Per Car.
The Mounting Bush for Rear Lower Wishbone is a high-quality suspension bushing designed to restore correct mounting and controlled movement of the rear lower control arm (wishbone) on compatible Porsche models. This bush sits between the wishbone and the chassis/subframe, acting as a flexible joint that absorbs vibration while allowing the suspension to articulate smoothly under braking, acceleration, and cornering loads.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Fits On To Diagram Ref No 12
Over time, suspension bushes can deteriorate due to age, road debris, heat, and constant flexing. A worn rear wishbone bush may cause clunking noises, unstable handling, uneven tyre wear, and difficulty maintaining correct wheel alignment. Replacing the bush helps return the rear suspension to proper factory behaviour, improving comfort, stability, and overall driving confidence.
What This Product Does:
- Cushions and supports the rear lower wishbone mounting point
- Allows controlled suspension movement while absorbing vibration
- Helps maintain correct wheel alignment under load
- Reduces road noise and harshness transmitted into the cabin
- Supports stable handling and braking performance
Symptoms Of A Worn Or Failed Rear Wishbone Bush:
- Clunking/knocking noises from the rear suspension
- Rear-end instability or “wandering” feel at speed
- Uneven or accelerated tyre wear
- Vibration through the body, especially over bumps
- Poor alignment that won’t hold after adjustment
- Excessive rear suspension movement under braking/acceleration
Why Replacement Matters:
- Restore proper suspension geometry and alignment stability
- Improve handling, comfort, and road feel
- Reduce unwanted noises and vibration
- Prevent premature wear of tyres and suspension components
- Maintain safe, predictable braking and cornering performance
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533101712B
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Shop Securely
12 Month Warranty
Worldwide Delivery
This is a comprehensive OE Match automatic transmission service kit designed for Porsche 958 Cayenne and 970 Panamera vehicles equipped with Tiptronic / automatic transmissions. It includes the critical bottom-end hardware and consumables needed for a transmission fluid change, filtration service, and sump.
Fits:
For cars with 8-speed Tiptronic Transmission
Porsche 958 Cayenne 2011 - 2018
Porsche 970.1 Panamera Diesel / Hybrid 2010 - 2013
Porsche 970.2 Panamera Diesel / Hybrid 2014 - 2016
Diagram ref no 30, 34 and 35
The kit includes:
• 1x OE Match transmission oil sump (pan) - OE ref no 95832136100
• 1x OE Match sump gasket - OE ref no 95832137100
• 1x OE Match gearbox oil strainer (filter) - OE ref no 95832545300
• 9x Meyle ATF III transmission fluid (1L) – OE ref no 00004330624
This OE Match transmission service kit combines both the hardware and the consumable fluids required for a Tiptronic / automatic transmission fluid service. It brings together the transmission sump plate (oil pan), sump gasket, oil strainer (filter), and the correct ATF III fluid - providing a ready-to-use set for your maintenance or overhaul.
In automatic transmissions, the bottom-end components manage fluid containment and filtration, while the fluid itself carries out lubrication, cooling, and hydraulic control for smooth gear changes. Refreshing all these parts together ensures a complete service with long-lasting results.
Function:
• Transmission Oil Sump (Pan)
Captures and holds the automatic transmission fluid (ATF) at the bottom of the gearbox, providing a sealed reservoir and protection for internal transmission components.
• Transmission Sump Gasket
Seals the joint between the transmission housing and the sump pan to prevent fluid leaks and maintain correct fluid levels.
• Gearbox Oil Strainer (Filter)
Screens larger particles and debris from the ATF before it enters the pump - protecting the internal hydraulic circuits and gearsets.
• ATF III Transmission Fluid (9x 1L)
Supplies fresh, correct-specification Tiptronic transmission oil (ATF III) to restore smooth shifting, proper fluid pressure, and dependable lubrication across the entire automatic transmission.
Together, these parts ensure that transmission fluid is clean, contained, and circulating properly - which is essential for smooth gear shifts, optimal performance, and long service life of the gearbox.
Regular servicing of your automatic transmission protects shifting performance and gearbox longevity. Over time:
• The sump gasket may harden or leak
• The strainer can become clogged with debris
• ATF fluid degrades from heat and shear
• Old fluid loses hydraulic integrity
Leaving these issues unaddressed can lead to rough shifts, overheating, lowered fuel economy, and accelerated transmission wear. This OE Match kit restores all critical wear and service items - ensuring your Tiptronic transmission operates smoothly and reliably.
When to replace. Install this kit when:
• Performing a full automatic transmission service
• Noticing shifting hesitation, harsh engagements, or noise
• Transmission fluid has not been changed according to service intervals
• You are servicing the transmission filter or pan
• The vehicle has high mileage or unknown service history
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95832136100
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
Fits:
Porsche 997 MKII Turbo 2010-13
Kit Contents:
1 x Oil Filter
1 x Pollen Filter
1 x Air Filter
6 x Spark Plug
1 x Sump Plug
1 x Sump Washer
Tailor Your Kit to Fit Your Needs:
Not ready to replace parts like spark plugs or the fuel filter? No problem. Before checkout, you can remove individual components to customise the kit to your specific needs.
Want to add more? When you add this kit to your basket, you'll also have the option to include additional parts such as engine oil, ignition coils and more - so you get exactly what your vehicle requires.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SERVICEKIT.997.TT.OEM
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
This OE Match transmission service kit is a complete bottom-end solution for servicing the automatic transmission oil sump area on Porsche Cayenne and Panamera Tiptronic-equipped vehicles. It contains all essential components required to renew the transmission fluid containment, filtration, and sealing system in one package.
Fits:
For cars with 8-speed Tiptronic Transmission
Porsche 958 Cayenne 2011 - 2018
Porsche 970.1 Panamera Diesel / Hybrid 2010 - 2013
Porsche 970.2 Panamera Diesel / Hybrid 2014 - 2016
Diagram ref no 30, 34 and 35
The kit includes:
• OE Match transmission oil sump (pan) - OE ref no 95832136100
• OE Match sump gasket - OE ref no 95832137100
• OE Match gearbox oil strainer (filter) - OE ref no 95832545300
Each component is manufactured to OE Match quality, engineered to match the original Porsche factory specifications for fit, sealing, and function.
Together, these components form the bottom containment and primary fluid filtration interface of the automatic transmission:
• The sump plate holds and protects the transmission fluid
• The oil strainer screens debris before fluid enters the transmission pump
• The sump gasket ensures fluid remains sealed at the interface.
Proper installation of all three parts is critical during fluid change, transmission servicing, or when diagnosing fluid leaks and transmission performance issues.
These parts are essential to the health and longevity of the automatic transmission. Over time:
• The sump plate can dent or warp and develop leaks
• The sump gasket can compress, harden, or fail, allowing fluid leaks
• The oil strainer can clog with debris, reducing fluid flow.
A compromised sump area can lead to low fluid levels, leakage, poor shifting behaviour, overheating, and transmission damage. Replacing all three components together ensures the bottom end of the transmission is sealed, filtered, and ready for service - reducing risk of fluid loss and extending transmission life.
When to replace. Install this kit when:
• Performing a transmission fluid and filter service
• Transmission is leaking ATF from the pan area
• You are conducting transmission diagnostics or teardown
• The transmission exhibits poor shifting, overheating, or low fluid pressure
• The vehicle has high mileage or unknown service history.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95832136100
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
This is an OE Match engine oil filter housing with integrated filter element. It replaces the original housing in applications where the oil filter assembly is removed or serviced, delivering the correct oil filtration path and sealing surfaces between the engine block and the filter media.
Fits:
Porsche 958 Cayenne 3.0L Diesel 2014 - 2018
Porsche 95B Macan 3.0L V6 TDI 2014 - 2018
Porsche 970 Panamera 3.0L Diesel 2012 - 2016
Diagram ref no 1
The oil filter housing holds the engine oil filter cartridge in place and directs oil through the filter media before the oil flows into the rest of the lubrication system. It ensures that contaminants such as metal particles, soot, and other debris are removed from the oil, protecting bearings, camshafts, and other internal engine components from wear. Proper oil filtration is essential for longevity, performance, and preventing early failure of internal engine parts.
Function:
• Supports engine oil filtration: Provides a secure, leak-free mount for the oil filter element
• Ensures correct oil flow: Channels oil through filter media to maintain clean lubrication
• Protects engine internals: Traps debris before oil circulates through critical areas
• Seals critical interfaces: Engine block to filter path with correct gasket seals
The oil filter housing is a critical engine component. Over time, original housings can become cracked, warped, or leak due to heat cycling and vibration, leading to oil leakage or poor seal integrity. A compromised housing can allow unfiltered oil to bypass the filter media, resulting in accelerated wear of internal engine parts, reduced oil pressure, and potential engine damage.
Replacing with a high-quality OE Match housing restores proper oil filtration paths, reduces risk of leaks, and helps maintain correct lubrication across all engine operating conditions.
When to replace. Replace this oil filter housing when:
• The original housing shows visible cracks, deformation, or leakage
• During oil filter and oil cooler service and the housing seal is compromised
• Oil pressure issues or contamination symptoms are present
• You are performing engine rebuild or high-mileage service
• The housing gasket no longer seals reliably
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810701032
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed