Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Fabspeed Exhaust
The Fabspeed Porsche 997.2 Carrera Performance Package is a comprehensive performance upgrade package developed for compatible Porsche 997.2 Carrera models from 2009–2012.
Kit Contents:
- Fabspeed 997.2 Carrera Race Headers with Cat Bypass
- Centre Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- Deluxe Quad-Style Exhaust Tips
- Carbon Fibre Competition Air Intake System
- ECU Tune
Fits:
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Rather than upgrading a single component, this package combines improvements to the exhaust system, air intake and ECU calibration. The components are designed to work together to improve exhaust flow, increase cold-air induction, sharpen throttle response and extract additional performance from the naturally aspirated 997.2 Carrera engine.
What This Product Does:
The package is designed to improve several areas of the vehicle's breathing and engine management simultaneously.
A naturally aspirated engine relies on efficient airflow into and out of the cylinders. Restrictions in the factory intake and exhaust systems can limit airflow, while the ECU calibration determines how the engine responds to operating conditions and driver inputs.
The Fabspeed package addresses these areas together by upgrading:
- Exhaust headers
- Catalytic-converter arrangement, depending on specification
- Centre exhaust section
- Side mufflersAir intake system
- ECU calibration
Together, these upgrades are intended to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Better exhaust flow
- Improved cold-air induction
- Stronger performance throughout the RPM range
- Reduced exhaust-system weight
- More aggressive sports-car sound
- ECU calibration matched to the performance hardware
When Might This Performance Package Be Worth Considering:
Unlike a normal replacement component, this package is primarily a performance upgrade rather than a repair item.
It may be suitable when the owner wants:
- More horsepower and torque
- Improved throttle response
- Better engine breathing
- Reduced exhaust restriction
- A more aggressive exhaust note
- Increased induction sound
- Reduced weight
- A coordinated intake, exhaust and ECU upgrade
- A complete performance solution rather than individual modifications
It can also be considered when ageing original exhaust components require replacement and the owner wants to upgrade rather than return the car completely to factory specification.
Why This Upgrade Matters:
Performance modifications generally work best when the components complement one another.
Installing a freer-flowing exhaust without considering intake airflow or ECU calibration may not provide the same overall result as a coordinated package.
The Fabspeed Performance Package addresses the vehicle as a complete system by combining:
Improved intake airflow + reduced exhaust restriction + ECU calibration.
This approach is intended to provide a more balanced improvement in power, torque, throttle response and sound.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972RPKGEC
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
The Fabspeed Porsche 997.2 Carrera Performance Package is a comprehensive performance upgrade package developed for compatible Porsche 997.2 Carrera models from 2009–2012.
Kit Contents:
- Fabspeed 997.2 Carrera Race Headers with Cat Bypass
- Centre Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- Deluxe Quad-Style Exhaust Tips
- Carbon Fibre Competition Air Intake System
- ECU Tune
Fits:
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Rather than upgrading a single component, this package combines improvements to the exhaust system, air intake and ECU calibration. The components are designed to work together to improve exhaust flow, increase cold-air induction, sharpen throttle response and extract additional performance from the naturally aspirated 997.2 Carrera engine.
What This Product Does:
The package is designed to improve several areas of the vehicle's breathing and engine management simultaneously.
A naturally aspirated engine relies on efficient airflow into and out of the cylinders. Restrictions in the factory intake and exhaust systems can limit airflow, while the ECU calibration determines how the engine responds to operating conditions and driver inputs.
The Fabspeed package addresses these areas together by upgrading:
- Exhaust headers
- Catalytic-converter arrangement, depending on specification
- Centre exhaust section
- Side mufflersAir intake system
- ECU calibration
Together, these upgrades are intended to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Better exhaust flow
- Improved cold-air induction
- Stronger performance throughout the RPM range
- Reduced exhaust-system weight
- More aggressive sports-car sound
- ECU calibration matched to the performance hardware
When Might This Performance Package Be Worth Considering:
Unlike a normal replacement component, this package is primarily a performance upgrade rather than a repair item.
It may be suitable when the owner wants:
- More horsepower and torque
- Improved throttle response
- Better engine breathing
- Reduced exhaust restriction
- A more aggressive exhaust note
- Increased induction sound
- Reduced weight
- A coordinated intake, exhaust and ECU upgrade
- A complete performance solution rather than individual modifications
It can also be considered when ageing original exhaust components require replacement and the owner wants to upgrade rather than return the car completely to factory specification.
Why This Upgrade Matters:
Performance modifications generally work best when the components complement one another.
Installing a freer-flowing exhaust without considering intake airflow or ECU calibration may not provide the same overall result as a coordinated package.
The Fabspeed Performance Package addresses the vehicle as a complete system by combining:
Improved intake airflow + reduced exhaust restriction + ECU calibration.
This approach is intended to provide a more balanced improvement in power, torque, throttle response and sound.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972RPKGEP
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
The Fabspeed Porsche 997.2 Carrera Performance Package is a comprehensive performance upgrade package developed for compatible Porsche 997.2 Carrera models from 2009–2012.
Kit Contents:
- Fabspeed 997.2 Carrera Race Headers with Cat Bypass
- Centre Muffler Bypass X-Pipe
- Maxflo Performance Side Mufflers
- Deluxe Quad-Style Exhaust Tips
- Carbon Fibre Competition Air Intake System
- ECU Tune
Fits:
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Rather than upgrading a single component, this package combines improvements to the exhaust system, air intake and ECU calibration. The components are designed to work together to improve exhaust flow, increase cold-air induction, sharpen throttle response and extract additional performance from the naturally aspirated 997.2 Carrera engine.
What This Product Does:
The package is designed to improve several areas of the vehicle's breathing and engine management simultaneously.
A naturally aspirated engine relies on efficient airflow into and out of the cylinders. Restrictions in the factory intake and exhaust systems can limit airflow, while the ECU calibration determines how the engine responds to operating conditions and driver inputs.
The Fabspeed package addresses these areas together by upgrading:
- Exhaust headers
- Catalytic-converter arrangement, depending on specification
- Centre exhaust section
- Side mufflersAir intake system
- ECU calibration
Together, these upgrades are intended to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Better exhaust flow
- Improved cold-air induction
- Stronger performance throughout the RPM range
- Reduced exhaust-system weight
- More aggressive sports-car sound
- ECU calibration matched to the performance hardware
When Might This Performance Package Be Worth Considering:
Unlike a normal replacement component, this package is primarily a performance upgrade rather than a repair item.
It may be suitable when the owner wants:
- More horsepower and torque
- Improved throttle response
- Better engine breathing
- Reduced exhaust restriction
- A more aggressive exhaust note
- Increased induction sound
- Reduced weight
- A coordinated intake, exhaust and ECU upgrade
- A complete performance solution rather than individual modifications
It can also be considered when ageing original exhaust components require replacement and the owner wants to upgrade rather than return the car completely to factory specification.
Why This Upgrade Matters:
Performance modifications generally work best when the components complement one another.
Installing a freer-flowing exhaust without considering intake airflow or ECU calibration may not provide the same overall result as a coordinated package.
The Fabspeed Performance Package addresses the vehicle as a complete system by combining:
Improved intake airflow + reduced exhaust restriction + ECU calibration.
This approach is intended to provide a more balanced improvement in power, torque, throttle response and sound.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972RPKGEB
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
The Fabspeed Porsche 997.2 Carrera Performance Package is a comprehensive performance upgrade package developed for compatible Porsche 997.2 Carrera models from 2009–2012.
Kit Contents:
Fabspeed 997.2 Carrera Sport Headers with Sport Catalytic Converters
Fabspeed Centre Muffler Bypass X-Pipe
Fabspeed Maxflo Performance Side Mufflers
Deluxe Quad-Style Exhaust Tips
Fabspeed Carbon Fibre Competition Air Intake System
Fabspeed ECU Tune
Fits:
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Rather than upgrading a single component, this package combines improvements to the exhaust system, air intake and ECU calibration. The components are designed to work together to improve exhaust flow, increase cold-air induction, sharpen throttle response and extract additional performance from the naturally aspirated 997.2 Carrera engine.
What This Product Does:
The package is designed to improve several areas of the vehicle's breathing and engine management simultaneously.
A naturally aspirated engine relies on efficient airflow into and out of the cylinders. Restrictions in the factory intake and exhaust systems can limit airflow, while the ECU calibration determines how the engine responds to operating conditions and driver inputs.
The Fabspeed package addresses these areas together by upgrading:
- Exhaust headers
- Catalytic-converter arrangement, depending on specification
- Centre exhaust section
- Side mufflersAir intake system
- ECU calibration
Together, these upgrades are intended to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Better exhaust flow
- Improved cold-air induction
- Stronger performance throughout the RPM range
- Reduced exhaust-system weight
- More aggressive sports-car sound
- ECU calibration matched to the performance hardware
When Might This Performance Package Be Worth Considering:
Unlike a normal replacement component, this package is primarily a performance upgrade rather than a repair item.
It may be suitable when the owner wants:
- More horsepower and torque
- Improved throttle response
- Better engine breathing
- Reduced exhaust restriction
- A more aggressive exhaust note
- Increased induction sound
- Reduced weight
- A coordinated intake, exhaust and ECU upgrade
- A complete performance solution rather than individual modifications
It can also be considered when ageing original exhaust components require replacement and the owner wants to upgrade rather than return the car completely to factory specification.
Why This Upgrade Matters:
Performance modifications generally work best when the components complement one another.
Installing a freer-flowing exhaust without considering intake airflow or ECU calibration may not provide the same overall result as a coordinated package.
The Fabspeed Performance Package addresses the vehicle as a complete system by combining:
Improved intake airflow + reduced exhaust restriction + ECU calibration.
This approach is intended to provide a more balanced improvement in power, torque, throttle response and sound.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972SPKGEC
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
The Fabspeed Porsche 997.2 Carrera Performance Package is a comprehensive performance upgrade package developed for compatible Porsche 997.2 Carrera models from 2009–2012.
Kit Contents:
Fabspeed 997.2 Carrera Sport Headers with Sport Catalytic Converters
Fabspeed Centre Muffler Bypass X-Pipe
Fabspeed Maxflo Performance Side Mufflers
Deluxe Quad-Style Exhaust Tips
Fabspeed Carbon Fibre Competition Air Intake System
Fabspeed ECU Tune
Fits:
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Rather than upgrading a single component, this package combines improvements to the exhaust system, air intake and ECU calibration. The components are designed to work together to improve exhaust flow, increase cold-air induction, sharpen throttle response and extract additional performance from the naturally aspirated 997.2 Carrera engine.
What This Product Does:
The package is designed to improve several areas of the vehicle's breathing and engine management simultaneously.
A naturally aspirated engine relies on efficient airflow into and out of the cylinders. Restrictions in the factory intake and exhaust systems can limit airflow, while the ECU calibration determines how the engine responds to operating conditions and driver inputs.
The Fabspeed package addresses these areas together by upgrading:
- Exhaust headers
- Catalytic-converter arrangement, depending on specification
- Centre exhaust section
- Side mufflersAir intake system
- ECU calibration
Together, these upgrades are intended to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Better exhaust flow
- Improved cold-air induction
- Stronger performance throughout the RPM range
- Reduced exhaust-system weight
- More aggressive sports-car sound
- ECU calibration matched to the performance hardware
When Might This Performance Package Be Worth Considering:
Unlike a normal replacement component, this package is primarily a performance upgrade rather than a repair item.
It may be suitable when the owner wants:
- More horsepower and torque
- Improved throttle response
- Better engine breathing
- Reduced exhaust restriction
- A more aggressive exhaust note
- Increased induction sound
- Reduced weight
- A coordinated intake, exhaust and ECU upgrade
- A complete performance solution rather than individual modifications
It can also be considered when ageing original exhaust components require replacement and the owner wants to upgrade rather than return the car completely to factory specification.
Why This Upgrade Matters:
Performance modifications generally work best when the components complement one another.
Installing a freer-flowing exhaust without considering intake airflow or ECU calibration may not provide the same overall result as a coordinated package.
The Fabspeed Performance Package addresses the vehicle as a complete system by combining:
Improved intake airflow + reduced exhaust restriction + ECU calibration.
This approach is intended to provide a more balanced improvement in power, torque, throttle response and sound.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972SPKGEP
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
The Fabspeed Porsche 997.2 Carrera Performance Package is a comprehensive performance upgrade package developed for compatible Porsche 997.2 Carrera models from 2009–2012.
Kit Contents:
Fabspeed 997.2 Carrera Sport Headers with Sport Catalytic Converters
Fabspeed Centre Muffler Bypass X-Pipe
Fabspeed Maxflo Performance Side Mufflers
Deluxe Quad-Style Exhaust Tips
Fabspeed Carbon Fibre Competition Air Intake System
Fabspeed ECU Tune
Fits:
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Rather than upgrading a single component, this package combines improvements to the exhaust system, air intake and ECU calibration. The components are designed to work together to improve exhaust flow, increase cold-air induction, sharpen throttle response and extract additional performance from the naturally aspirated 997.2 Carrera engine.
What This Product Does:
The package is designed to improve several areas of the vehicle's breathing and engine management simultaneously.
A naturally aspirated engine relies on efficient airflow into and out of the cylinders. Restrictions in the factory intake and exhaust systems can limit airflow, while the ECU calibration determines how the engine responds to operating conditions and driver inputs.
The Fabspeed package addresses these areas together by upgrading:
- Exhaust headers
- Catalytic-converter arrangement, depending on specification
- Centre exhaust section
- Side mufflersAir intake system
- ECU calibration
Together, these upgrades are intended to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Better exhaust flow
- Improved cold-air induction
- Stronger performance throughout the RPM range
- Reduced exhaust-system weight
- More aggressive sports-car sound
- ECU calibration matched to the performance hardware
When Might This Performance Package Be Worth Considering:
Unlike a normal replacement component, this package is primarily a performance upgrade rather than a repair item.
It may be suitable when the owner wants:
- More horsepower and torque
- Improved throttle response
- Better engine breathing
- Reduced exhaust restriction
- A more aggressive exhaust note
- Increased induction sound
- Reduced weight
- A coordinated intake, exhaust and ECU upgrade
- A complete performance solution rather than individual modifications
It can also be considered when ageing original exhaust components require replacement and the owner wants to upgrade rather than return the car completely to factory specification.
Why This Upgrade Matters:
Performance modifications generally work best when the components complement one another.
Installing a freer-flowing exhaust without considering intake airflow or ECU calibration may not provide the same overall result as a coordinated package.
The Fabspeed Performance Package addresses the vehicle as a complete system by combining:
Improved intake airflow + reduced exhaust restriction + ECU calibration.
This approach is intended to provide a more balanced improvement in power, torque, throttle response and sound.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972SPKGEB
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade developed for the Porsche 997.2 Turbo and Turbo S from 2010–2012.
Kit Contents:
- Fabspeed Supersport X-Pipe
- Fabspeed Sport Headers
- Cat-Bypass Pipes
- Competition Air Intake
- XperTune Performance Software
Fits:
- Porsche 997 MKII Turbo / Turbo S 2010-12
What This Product Does:
The package is designed to improve several areas of the Porsche's engine and exhaust system simultaneously.
A turbocharged engine relies heavily on efficient airflow. Air must enter the engine with minimal restriction, while exhaust gases must flow efficiently through the turbochargers and exhaust system.
The Fabspeed package addresses both sides of this process while also providing ECU calibration designed to take advantage of the upgraded hardware.
The package is designed to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Improved turbo response
- Reduced exhaust restriction
- Increased intake airflow
- Improved exhaust scavenging
- Stronger acceleration
- More aggressive exhaust sound
- Increased turbocharger sound
- ECU calibration matched to the performance hardware
- More engaging overall driving characteristics
When Might This Performance Package Be Worth Considering:
This package is primarily a performance upgrade, not a conventional maintenance item.
It may be suitable when:
- Increased horsepower is desired
- Increased torque is wanted
- Stronger acceleration is required
- Improved throttle response is desired
- Better turbo response is wanted
- A freer-flowing exhaust is required
- Increased intake airflow is desired
- A more aggressive exhaust note is wanted
- A coordinated performance package is preferred
- Existing exhaust components require replacement
- The vehicle is being developed for performance or track use
Why A Complete Performance Package Matters:
Individual performance modifications can provide useful improvements, but the greatest benefit is often achieved when complementary components are designed to work together.
This package addresses:
- Intake airflow + exhaust flow + exhaust scavenging + ECU calibration.
- The intake allows the engine to breathe more freely.
- The headers and exhaust reduce restriction and improve exhaust-gas movement.
- The ECU software then calibrates engine operation around the performance hardware.
This coordinated approach is designed to provide a more balanced increase in performance than simply replacing one exhaust component.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TRPKGEG
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade developed for the Porsche 997.2 Turbo and Turbo S from 2010–2012.
Kit Contents:
- Fabspeed Supersport X-Pipe
- Fabspeed Sport Headers
- Cat-Bypass Pipes
- Deluxe Quad Style Tips
- Competition Air Intake
- XperTune Performance Software
Fits:
- Porsche 997 MKII Turbo / Turbo S 2010-12
What This Product Does:
The package is designed to improve several areas of the Porsche's engine and exhaust system simultaneously.
A turbocharged engine relies heavily on efficient airflow. Air must enter the engine with minimal restriction, while exhaust gases must flow efficiently through the turbochargers and exhaust system.
The Fabspeed package addresses both sides of this process while also providing ECU calibration designed to take advantage of the upgraded hardware.
The package is designed to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Improved turbo response
- Reduced exhaust restriction
- Increased intake airflow
- Improved exhaust scavenging
- Stronger acceleration
- More aggressive exhaust sound
- Increased turbocharger sound
- ECU calibration matched to the performance hardware
- More engaging overall driving characteristics
When Might This Performance Package Be Worth Considering:
This package is primarily a performance upgrade, not a conventional maintenance item.
It may be suitable when:
- Increased horsepower is desired
- Increased torque is wanted
- Stronger acceleration is required
- Improved throttle response is desired
- Better turbo response is wanted
- A freer-flowing exhaust is required
- Increased intake airflow is desired
- A more aggressive exhaust note is wanted
- A coordinated performance package is preferred
- Existing exhaust components require replacement
- The vehicle is being developed for performance or track use
Why A Complete Performance Package Matters:
Individual performance modifications can provide useful improvements, but the greatest benefit is often achieved when complementary components are designed to work together.
This package addresses:
- Intake airflow + exhaust flow + exhaust scavenging + ECU calibration.
- The intake allows the engine to breathe more freely.
- The headers and exhaust reduce restriction and improve exhaust-gas movement.
- The ECU software then calibrates engine operation around the performance hardware.
This coordinated approach is designed to provide a more balanced increase in performance than simply replacing one exhaust component.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TRPKGEP
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade developed for the Porsche 997.2 Turbo and Turbo S from 2010–2012.
Kit Contents:
- Fabspeed Supersport X-Pipe
- Fabspeed Sport Headers
- Cat-Bypass Pipes
- Deluxe Quad Style Tips
- Competition Air Intake
- XperTune Performance Software
Fits:
- Porsche 997 MKII Turbo / Turbo S 2010-12
What This Product Does:
The package is designed to improve several areas of the Porsche's engine and exhaust system simultaneously.
A turbocharged engine relies heavily on efficient airflow. Air must enter the engine with minimal restriction, while exhaust gases must flow efficiently through the turbochargers and exhaust system.
The Fabspeed package addresses both sides of this process while also providing ECU calibration designed to take advantage of the upgraded hardware.
The package is designed to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Improved turbo response
- Reduced exhaust restriction
- Increased intake airflow
- Improved exhaust scavenging
- Stronger acceleration
- More aggressive exhaust sound
- Increased turbocharger sound
- ECU calibration matched to the performance hardware
- More engaging overall driving characteristics
When Might This Performance Package Be Worth Considering:
This package is primarily a performance upgrade, not a conventional maintenance item.
It may be suitable when:
- Increased horsepower is desired
- Increased torque is wanted
- Stronger acceleration is required
- Improved throttle response is desired
- Better turbo response is wanted
- A freer-flowing exhaust is required
- Increased intake airflow is desired
- A more aggressive exhaust note is wanted
- A coordinated performance package is preferred
- Existing exhaust components require replacement
- The vehicle is being developed for performance or track use
Why A Complete Performance Package Matters:
Individual performance modifications can provide useful improvements, but the greatest benefit is often achieved when complementary components are designed to work together.
This package addresses:
- Intake airflow + exhaust flow + exhaust scavenging + ECU calibration.
- The intake allows the engine to breathe more freely.
- The headers and exhaust reduce restriction and improve exhaust-gas movement.
- The ECU software then calibrates engine operation around the performance hardware.
This coordinated approach is designed to provide a more balanced increase in performance than simply replacing one exhaust component.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TRPKGEB
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade developed for the Porsche 997.2 Turbo and Turbo S from 2010–2012.
Kit Contents:
- Fabspeed Supersport X-Pipe
- Fabspeed Sport Headers
- Sport Catalytic Converters
- Competition Air Intake
- XperTune Performance Software
Fits:
- Porsche 997 MKII Turbo / Turbo S 2010-12
What This Product Does:
The package is designed to improve several areas of the Porsche's engine and exhaust system simultaneously.
A turbocharged engine relies heavily on efficient airflow. Air must enter the engine with minimal restriction, while exhaust gases must flow efficiently through the turbochargers and exhaust system.
The Fabspeed package addresses both sides of this process while also providing ECU calibration designed to take advantage of the upgraded hardware.
The package is designed to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Improved turbo response
- Reduced exhaust restriction
- Increased intake airflow
- Improved exhaust scavenging
- Stronger acceleration
- More aggressive exhaust sound
- Increased turbocharger sound
- ECU calibration matched to the performance hardware
- More engaging overall driving characteristics
When Might This Performance Package Be Worth Considering:
This package is primarily a performance upgrade, not a conventional maintenance item.
It may be suitable when:
- Increased horsepower is desired
- Increased torque is wanted
- Stronger acceleration is required
- Improved throttle response is desired
- Better turbo response is wanted
- A freer-flowing exhaust is required
- Increased intake airflow is desired
- A more aggressive exhaust note is wanted
- A coordinated performance package is preferred
- Existing exhaust components require replacement
- The vehicle is being developed for performance or track use
Why A Complete Performance Package Matters:
Individual performance modifications can provide useful improvements, but the greatest benefit is often achieved when complementary components are designed to work together.
This package addresses:
- Intake airflow + exhaust flow + exhaust scavenging + ECU calibration.
- The intake allows the engine to breathe more freely.
- The headers and exhaust reduce restriction and improve exhaust-gas movement.
- The ECU software then calibrates engine operation around the performance hardware.
This coordinated approach is designed to provide a more balanced increase in performance than simply replacing one exhaust component.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TSPKGEG
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade developed for the Porsche 997.2 Turbo and Turbo S from 2010–2012.
Kit Contents:
- Fabspeed Supersport X-Pipe
- Fabspeed Sport Headers
- Sport Catalytic Converters
- Deluxe Quad Style Tips
- Competition Air Intake
- XperTune Performance Software
Fits:
- Porsche 997 MKII Turbo / Turbo S 2010-12
What This Product Does:
The package is designed to improve several areas of the Porsche's engine and exhaust system simultaneously.
A turbocharged engine relies heavily on efficient airflow. Air must enter the engine with minimal restriction, while exhaust gases must flow efficiently through the turbochargers and exhaust system.
The Fabspeed package addresses both sides of this process while also providing ECU calibration designed to take advantage of the upgraded hardware.
The package is designed to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Improved turbo response
- Reduced exhaust restriction
- Increased intake airflow
- Improved exhaust scavenging
- Stronger acceleration
- More aggressive exhaust sound
- Increased turbocharger sound
- ECU calibration matched to the performance hardware
- More engaging overall driving characteristics
When Might This Performance Package Be Worth Considering:
This package is primarily a performance upgrade, not a conventional maintenance item.
It may be suitable when:
- Increased horsepower is desired
- Increased torque is wanted
- Stronger acceleration is required
- Improved throttle response is desired
- Better turbo response is wanted
- A freer-flowing exhaust is required
- Increased intake airflow is desired
- A more aggressive exhaust note is wanted
- A coordinated performance package is preferred
- Existing exhaust components require replacement
- The vehicle is being developed for performance or track use
Why A Complete Performance Package Matters:
Individual performance modifications can provide useful improvements, but the greatest benefit is often achieved when complementary components are designed to work together.
This package addresses:
- Intake airflow + exhaust flow + exhaust scavenging + ECU calibration.
- The intake allows the engine to breathe more freely.
- The headers and exhaust reduce restriction and improve exhaust-gas movement.
- The ECU software then calibrates engine operation around the performance hardware.
This coordinated approach is designed to provide a more balanced increase in performance than simply replacing one exhaust component.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TSPKGEP
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade developed for the Porsche 997.2 Turbo and Turbo S from 2010–2012.
Kit Contents:
- Fabspeed Supersport X-Pipe
- Fabspeed Sport Headers
- Sport Catalytic Converters
- Deluxe Quad Style Tips
- Competition Air Intake
- XperTune Performance Software
Fits:
- Porsche 997 MKII Turbo / Turbo S 2010-12
What This Product Does:
The package is designed to improve several areas of the Porsche's engine and exhaust system simultaneously.
A turbocharged engine relies heavily on efficient airflow. Air must enter the engine with minimal restriction, while exhaust gases must flow efficiently through the turbochargers and exhaust system.
The Fabspeed package addresses both sides of this process while also providing ECU calibration designed to take advantage of the upgraded hardware.
The package is designed to provide:
- Increased horsepower
- Increased torque
- Improved throttle response
- Improved turbo response
- Reduced exhaust restriction
- Increased intake airflow
- Improved exhaust scavenging
- Stronger acceleration
- More aggressive exhaust sound
- Increased turbocharger sound
- ECU calibration matched to the performance hardware
- More engaging overall driving characteristics
When Might This Performance Package Be Worth Considering:
This package is primarily a performance upgrade, not a conventional maintenance item.
It may be suitable when:
- Increased horsepower is desired
- Increased torque is wanted
- Stronger acceleration is required
- Improved throttle response is desired
- Better turbo response is wanted
- A freer-flowing exhaust is required
- Increased intake airflow is desired
- A more aggressive exhaust note is wanted
- A coordinated performance package is preferred
- Existing exhaust components require replacement
- The vehicle is being developed for performance or track use
Why A Complete Performance Package Matters:
Individual performance modifications can provide useful improvements, but the greatest benefit is often achieved when complementary components are designed to work together.
This package addresses:
- Intake airflow + exhaust flow + exhaust scavenging + ECU calibration.
- The intake allows the engine to breathe more freely.
- The headers and exhaust reduce restriction and improve exhaust-gas movement.
- The ECU software then calibrates engine operation around the performance hardware.
This coordinated approach is designed to provide a more balanced increase in performance than simply replacing one exhaust component.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TSPKGEB
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2010-13
Superb dual-tone sports car sound; throaty and deep at idle and medium speeds
FEATURES:
• Fits all Porsche 997.2 GT3 / GT3 RS vehicles 2009-2011
• Mini Maxflo are radius stress relieved, hydro-formed cases that are pulse TIG welded using 2000 degree ceramic fiber and stainless steel wool packing.
• Constructed from high quality 14-16 gauge, C.N.C. mandrel bent T304L stainless steel
• Retains Sport Mode button when used with factory side mufflers
• Simple DIY bolt-on installation with no cutting or welding required
• Includes Deluxe Dual Style Tips in your choice of Carbon Fiber, Polished Stainless or Satin Black finish
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972GT3CMAX
The product you are viewing cross references to these numbers
- Porsche 997 MKII GT3 / GT3 RS 2010-11

The ultimate lightweight cat-back exhaust system for the 997.2 GT3 saves 54lbs (24.4kg) off the rear of the vehicle and is perfect for competitive track use, high performance drivers education events, or aggressive street sound.
FEATURES:
• Fits all Porsche 997.2 GT3 / GT3 RS models (2010-2011)
• Perfect exhaust solution for maximum performance and sound during competitive track use, high performance drivers education events, or simply achieving an aggressive and exciting street sound.
• Saves over 54lbs (24kg) from the rear of the 997.2 GT3 which improves handling and acceleration by replacing the bulky factory center muffler and side mufflers
• Engineered and manufactured with 3" (76mm) T304L stainless steel tubing with integral tuned center X-Pipe to 70mm outlets.
• Bolt-on installation' no cutting or welding required
• Options of 4" Carbon Fiber Tips or 4" Stainless Steel Brushed Tips
• Includes two (2) 90 degree Turndown Tips for track use.
• All Fabspeed performance products are backed by Fabspeed's Limited Lifetime Warranty
NOTE: This is a straight pipe, racing oriented exhaust system built to be light and make power. As a result, the volume level will be very high inside the vehicle.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972GT3CRX
The product you are viewing cross references to these numbers
- Porsche 997 MKII GT3 / GT3 RS 2010-11

Direct replacement for the failure-prone OEM muffler providing improved flow, weight savings, and aggressive sound. Our new talk-pipe design blends the exhaust from the right and left cylinders creating an incredible smooth blended sound, and our simplified two-bolt mounting system makes installing easier than ever!
FEATURES:
• Fits all Porsche 997.2 GT3 / GT3 RS vehicles (2010-2012)
• Adds 10 whp and 6 ft-lbs of torque increasing throttle response
• Saves 10 lbs from the rear of the vehicle
• Retains Sport Mode control button when used with factory side mufflers
• 14-16ga T304 Stainless Steel construction
• Includes 4" Deluxe Dual Style Tips in your choice of Carbon Fiber, Polished Stainless or Satin Black, or you can opt to use your OEM tips
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972GT3CMB
The product you are viewing cross references to these numbers
- Porsche 997 MKII GT3 / GT3 RS 2010-11

The 997.2 Carrera Center Muffler Bypass X-Pipe makes a great compliment to either the factory side mufflers or to Fabspeed's Maxflo Performance Side Exhaust System. It improves exhaust tone and saves weight by replacing the factory center muffler with a lightweight x-pipe.
POWER:
You'll experience a nice seat of the pants power gain. We saw peak gains of 12 whp and 15 ft-lbs.
SOUND:
Without PSE: A subtle improvement, with a throatier, deeper exhaust note. A perfect first exhaust upgrade for your Carrera. Combine with our Maxflow Performance Side Exhaust System for the perfect level of volume and a refined sports car sound.
With PSE: A great delta between valves closed and open. With valves open and the side mufflers allowed to channel through the free flowing CMBP, the exhaust offers a race like, brilliant exhaust note. Very aggressive, noticeable burbles and crackles. With valves closed, return to a refined, non droning civil level of exhaust tone.
FEATURES:
• Fits all Porsche 997.2 Carrera vehicles (2009-2012) (2012 was a split model year, a 2012 911 Carrera could be either a 997.2 or 991, please verify if your car is a 997.2 or a 991 before purchase)
• Improves horsepower and torque by 12 whp and 15 ft-lbs
• Saves 5 lbs. versus the factory center muffler
• Constructed from high-quality .065" thick C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt-on replacement for the factory center muffler
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972CMBPX
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Fabspeed Exhaust Systems - Precision Performance & Sound Upgrades
Fabspeed Exhaust Systems are premium performance exhaust upgrades engineered to deliver increased power, improved exhaust flow, and a distinctive motorsport-inspired sound. Designed and manufactured with precision engineering and performance testing at their core, Fabspeed exhausts are built to enhance the driving experience of Porsche road and track vehicles alike.
Available from Design911, Porsche Fabspeed exhaust components are crafted using high-quality stainless steel and optimised designs to reduce backpressure, improve throttle response, and unleash a more engaging exhaust tone while maintaining durability and reliability.
What Do Fabspeed Exhaust Systems Do?
Fabspeed exhausts optimise exhaust gas flow and acoustic performance.
Core Functions:
- Reduce exhaust restriction and backpressure.
- Improve throttle response and power delivery.
- Enhance exhaust sound and character.
- Improve engine efficiency and breathing.
- Upgrade exhaust aesthetics and build quality.
A high-flow exhaust system plays a key role in unlocking engine performance.
Why Do Standard Exhaust Systems Fail or Limit Performance?
Factory exhaust systems are designed to prioritise emissions
compliance, cost efficiency, and sound suppression. Over time, they can suffer
from:
- Restrictive internal baffling reducing performance.
- Corrosion from moisture and repeated heat cycles.
- Excessive weight limiting efficiency.
- Muted exhaust sound lacking engagement.
- Reduced compatibility with performance tuning upgrades.
As engines are pushed harder, standard exhausts can become a performance bottleneck.
Why Upgrade to a Fabspeed Exhaust?
Fabspeed exhaust systems are designed for drivers seeking performance-focused enhancements.
Upgrade Benefits:
- Improved exhaust flow for increased performance.
- Sportier, more aggressive exhaust sound.
- Lightweight, durable stainless steel construction.
- Precision-engineered components for perfect fitment.
- Ideal for performance road cars and track applications.
Upgrading to Fabspeed delivers noticeable gains in sound, response, and driving excitement.
Highlights
- Porsche Fabspeed performance exhaust systems
- Improved exhaust flow and throttle response
- Sporty, motorsport-inspired exhaust sound
- High-quality stainless steel construction
- Designed for performance and enthusiast driving
