do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a specialist replacement-parts brand developed around Porsche applications, covering routine maintenance, mechanical repairs, restoration and difficult-to-source components for classic and modern models. Design911 selects brands for quality and Porsche fitment, with knowledgeable specialists available to help owners and workshops choose suitable parts.
The OE Match story
OE Match is focused on preserving Porsche vehicles by returning hard-to-find and no-longer-available components to the market. Its purpose is to keep Porsche vehicles maintained, repaired, restored and usable for the future, particularly where original components have become expensive, difficult to source or discontinued.
Supplied catalogue information records over 8000 individual part numbers, more than 11,800 OE cross-references and over 100 new products in engineering, while the wider product programme contains more than 9,000 variants; these figures describe different measures of the range. Continuing development involves researching the parts owners and workshops genuinely need, working with specialist manufacturers, reviewing engineering specifications, assessing samples, testing and approving components before release. From small seals, clips and brackets to major mechanical components, the aim is to prevent a difficult-to-source item from holding up an entire repair or restoration: preserving Porsche, one part at a time.
Why choose OE Match for your Porsche
OE Match is a quality aftermarket and OE-equivalent replacement option developed specifically around Porsche applications rather than adapted from a general aftermarket range. Original references, vehicle fitment information, dimensions, materials and component specifications are used to identify suitable replacements for routine service, age-related wear, larger mechanical repairs and restoration work.
Its research, development and quality-control processes assess material and manufacturing quality, dimensions and specification, OE-reference compatibility, vehicle application, fit and function, supplier samples, product consistency, packaging and presentation. Where appropriate, physical inspection and fitment evaluation form part of final approval, and products must meet the programme's requirements before entering the catalogue.
Coverage includes the Porsche 356, 911, 912, 914, 924, 944 and 928, alongside the 964, 993, Boxster 986, 996, Cayenne, Cayman and 997. This gives owners, enthusiasts, independent specialists and professional workshops a Porsche-focused replacement option alongside Genuine Porsche parts. OE Match is intended to provide correctly specified, OE-equivalent replacements with sensible running costs rather than simply serving as a lower-cost alternative. Design911 selects the brands it carries for quality and fitment and can advise customers on suitable options for maintenance, restoration or upgrades.
- A replacement-parts programme developed specifically around Porsche applications.
- More than 9,000 product variants within the wider programme.
- Original Porsche part-number cross-references wherever applicable.
- Dedicated research, development, sample evaluation and quality-control processes.
- Classic and modern Porsche coverage for maintenance, repairs and restoration.
- Development focused on difficult-to-source and discontinued applications.
Categories we stock from this brand
Design911 stocks OE Match across an extensive range of Porsche mechanical, electrical, body, interior and maintenance categories. Original Porsche references help identify replacements where part numbers have been superseded or several versions exist. Always check the model, production year, engine, transmission, side or position, connector type where relevant and individual product notes. Incorrect application, mismatched versions, reused seals or hardware and worn supporting components can cause noise, premature wear, leaks, fitment problems or repeat failures. Safety-critical specifications and installation should be checked by a competent technician.
Engine components
OE Match engine coverage supports maintenance, repair and rebuilding work, ranging from small retaining hardware and brackets to components associated with the cylinder heads, crankcase, valve train and supporting engine systems.
- Confirm the engine type, capacity, production year and original reference.
- Inspect associated seals, fasteners and supporting components during engine work.
- Check whether components require specialist measuring, machining or installation procedures.
Engine seals and gaskets
Replacement seals and gaskets help address oil, coolant, air and vacuum leaks throughout classic and modern Porsche engines. The range supports individual repairs as well as more extensive engine resealing and rebuilding projects.
- Identify the source of a leak before replacing components.
- Check mating surfaces, housings and fasteners for wear or damage.
- Use the correct gasket or seal version for the engine and production year.
Cooling systems and radiators
OE Match cooling-system coverage includes components used to circulate coolant, control temperature and transfer heat away from the engine. These parts support repairs involving radiators, pipework, hoses, fittings and related cooling hardware.
- Investigate coolant loss, overheating, staining and damaged hoses promptly.
- Check pressure caps, clips, seals and connecting pipes during cooling-system work.
- Bleed and refill the system using the correct model-specific procedure.
Oil system components
Oil-system parts support engine lubrication, oil circulation, filtration and leak repair. Coverage can assist with routine servicing as well as work on oil lines, fittings, housings, seals and associated hardware.
- Confirm thread sizes, connection types and component position.
- Inspect flexible lines and seals for age-related hardening or leakage.
- Verify the required oil specification and system capacity separately.
Transmission and drivetrain
OE Match transmission and drivetrain parts support manual and automatic gearbox repairs, clutch operation, gear selection and the transfer of power to the driven wheels.
- Match parts to the exact gearbox or transmission code where specified.
- Check splines, bearings, seals, joints and supporting hardware for related wear.
- Diagnose noise, vibration or difficult gear selection before ordering components.
Engine and gearbox mounts
Replacement mounts help support the powertrain, maintain alignment and control unwanted engine and transmission movement. Worn mounts may contribute to vibration, knocking, drivetrain shunt or unsettled gear changes.
- Inspect mounts for cracking, collapse, separation and oil contamination.
- Check mounting bolts, washers, brackets and surrounding hardware.
- Consider replacing paired mounts together where required by the application.
Suspension and steering
OE Match suspension hardware and steering components support repairs intended to restore accurate wheel control, alignment and predictable steering response. Coverage includes wear-related items used around suspension joints, mounting points and steering assemblies.
- Investigate play, knocking, uneven tyre wear and unstable handling.
- Check left- and right-hand applications and axle position carefully.
- Arrange wheel alignment after replacing components that affect geometry.
Braking components
OE Match braking components form part of its Porsche-specific replacement programme. Brake work may address wear, restore stopping performance or prepare a car for fast-road or track use, but the specification of each component must suit the intended application.
- Symptoms prompting inspection include vibration, longer stopping distances, squealing, pulling to one side, warning lights and visible disc or pad wear.
- Confirm whether the selected component is an OE-equivalent replacement or a performance upgrade.
- Check whether new fitting kits, seals, hardware and pad wear sensors are required.
Electrical and ignition
Electrical and ignition coverage supports Porsche repairs involving starting, charging, ignition and engine-management faults. Correct diagnosis is particularly important because wiring, supply voltage, earth connections and other supporting components can produce similar symptoms.
- Typical symptoms include intermittent no-start, misfires, rough idle, poor charging, warning lights and heat-soak failures.
- Check the original reference, engine, production year and connector type.
- Test power supplies, earths and wiring before replacing electrical components.
Sensors and switches
OE Match sensors and switches provide replacement options for systems that monitor or control engine operation, temperature, pressure, position, lighting and driver warnings.
- Similar-looking sensors may have different calibrations, connectors or applications.
- Use fault codes as a diagnostic guide rather than proof that a sensor has failed.
- Inspect connectors for corrosion, damaged terminals and degraded wiring.
Heating and air conditioning
Heating, ventilation and air-conditioning components support cabin temperature control, airflow and demisting. The range covers replacement needs involving blower assemblies, controls, ducts, valves, fittings and related hardware.
- Check whether parts differ between left- and right-hand-drive vehicles.
- Confirm connector, housing and production-year variations.
- Refrigerant-system work should be completed by an appropriately qualified technician.
Exhaust components
OE Match exhaust coverage supports repairs to worn, corroded or leaking parts of the exhaust system, together with associated brackets, clamps, seals and fittings.
- Inspect joints, flanges, fixings and heat shields when replacing exhaust parts.
- Check emissions equipment and sensor positions for the specific model.
- Corroded fasteners may require additional hardware during installation.
Rubber seals and hoses
Rubber components are important throughout a Porsche for sealing fluids, air, weather and noise. OE Match coverage assists with replacing hardened, split, swollen, leaking or missing hoses, boots, grommets and sealing profiles.
- Match the shape, dimensions, connection points and intended fluid or system.
- Inspect adjoining clips, pipes and sealing surfaces.
- Age-related rubber deterioration can affect several nearby components at once.
Exterior trim and body components
Exterior and body coverage supports accident repair, cosmetic refurbishment and restoration. It includes replacement needs involving trim, lamps, brackets, fixings, seals and other model-specific body fittings.
- Confirm body style, side, position, colour and finish where applicable.
- Check whether clips, seals or mounting hardware are supplied separately.
- Compare the original component and reference before installation.
Interior components
OE Match interior products support the repair and restoration of cabin fittings that may have worn, faded, broken or become difficult to source with age.
- Check colour, finish, side and model-year variations.
- Inspect clips, brackets and fixing points before fitting replacement trim.
- Some interior components may differ according to body style or equipment specification.
Service and maintenance parts
OE Match service components support scheduled upkeep across Porsche generations, helping owners and workshops maintain reliability, efficiency and system protection while addressing everyday wear.
- Hard starting, rough idle, poor fuel economy and warning lights can accompany clogged filters or worn ignition components.
- Select service items against the exact Porsche model, engine, production year and required specification.
- Review related seals, hardware and other maintenance items when planning a larger service.
Restoration hardware
Restoration hardware covers the small but essential fasteners, brackets, clips, fittings and retaining components needed to complete repairs accurately and securely.
- Record the position and orientation of original hardware during dismantling.
- Check thread, length, finish, quantity and model application.
- Replacing damaged or heavily corroded hardware can prevent delays during reassembly.
Difficult-to-source and discontinued applications
A central purpose of the OE Match programme is identifying gaps where original Porsche parts have become difficult to obtain or are no longer available. Reintroduced components can help prevent one missing seal, clip, bracket or mechanical part from delaying an otherwise complete repair or restoration.
- Use OE cross-references and dimensions to verify the intended application.
- Check whether the original number has been superseded.
- Review product-specific fitment notes where several component versions exist.
Brake Pad Wear Sensors
OE Match brake pad wear sensors provide replacement options for Porsche brake servicing. Sensors may need renewal when pads are replaced or when a worn or damaged sensor causes a brake wear warning.
- Warning messages with new pads, damaged sensor cables and broken clips warrant inspection.
- Match the OE reference, caliper application, model year, connector and sensor position.
- Check the quantity required and whether sensors are included with the selected brake parts.
Engine Electrical
OE Match engine electrical parts cover starting, charging, ignition, sensor and switch applications. They support repairs involving intermittent no-start, misfires, rough idle, stalling, battery drain, poor charging, warning lights, inconsistent readings and heat-related failures.
- Similar-looking components may have different electrical or vehicle applications.
- Repeat faults can indicate a mismatched component or a worn supporting item.
- Battery condition, earth straps, connectors and voltage drop should be checked during diagnosis.
Service Parts
OE Match service parts cover everyday maintenance requirements intended to protect the engine, gearbox and other major systems. Routine replacement can address natural wear caused by heat, friction, fluid degradation and environmental exposure.
- Match filters, ignition parts, belts and fluids to the exact vehicle specification.
- Many symptoms overlap, so establishing a sound service baseline can assist diagnosis.
- Keep a service record to support future maintenance and fault finding.
Service Kits
OE Match service kits group key maintenance components to simplify servicing and establish a known baseline. They are particularly useful when catching up on overdue maintenance or assessing sluggish running, inconsistent idle, poor economy and reduced performance.
- Match each kit to the exact Porsche model, engine and production year.
- Contents vary, so review the included components rather than assuming every service item is supplied.
- Add any required while-you-are-there items, such as spark plugs, belts, fluids, seals or hardware.
Explore the range
Browse the OE Match Porsche range at Design911, then narrow your selection by model and category and cross-check the original part references and fitment notes. Whether you are planning routine maintenance, a workshop repair or a complete restoration, Design911's Porsche specialists can help identify suitable components within a programme focused on fitment, quality and long-term vehicle preservation.
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 987 Boxster S & Cayman S 3.4ltr M97.21 (217kW / 295HP)
Restore your Porsche engine to factory performance with this
OE Match Complete Engine Gasket Set, specifically developed for the Porsche
987 Boxster S and Cayman S 3.4ltr fitted with the M97.21 engine producing 217kW
(295HP).
Fits:
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
Designed for professional engine rebuilding and major engine repairs, this comprehensive gasket kit contains the essential seals and gaskets required to completely rebuild your engine, including both cylinder head gaskets. Whether you're carrying out a full engine overhaul, replacing leaking gaskets or rebuilding a high-mileage M97 engine, this complete gasket set provides the OE-quality sealing components required for a reliable, long-lasting repair.
Manufactured to original equipment specifications using premium sealing materials, every gasket is precision engineered for accurate fitment, exceptional sealing performance and maximum durability under the demanding operating conditions of the Porsche flat-six engine.
What Does a Complete Engine Gasket Set Do?
A complete engine gasket set provides all the critical sealing components required when rebuilding or overhauling an engine.
Its primary functions are to:
- Seal the combustion chambers.
- Maintain correct engine compression.
- Prevent oil leaks.
- Prevent coolant leaks.
- Keep oil and coolant passages completely separate.
- Maintain correct internal engine pressures.
- Restore factory sealing performance following engine disassembly.
Replacing every gasket during an engine rebuild ensures every sealing surface is renewed, reducing the risk of future leaks and improving long-term engine reliability.
Why Replace the Complete Gasket Set?
Once an engine has been dismantled, the original gaskets become permanently compressed and should never be reused. Installing a complete gasket set guarantees every sealing component is replaced at the same time, providing the highest standard of engine rebuild.
A complete gasket set is recommended when carrying out:
- Complete engine rebuilds.
- Cylinder head replacement.
- Head gasket repairs.
- Engine reconditioning.
- Major oil leak repairs.
- Coolant leak repairs.
- High-mileage engine refurbishment.
- Performance engine builds.
Replacing only individual gaskets can leave ageing seals elsewhere in the engine, increasing the likelihood of future leaks.
Why Do Engine Gaskets Fail?
Engine gaskets operate in extremely demanding conditions and naturally deteriorate over time.
Common causes of failure include:
- Continuous heat cycling.
- High engine temperatures.
- Engine overheating.
- Oil contamination.
- Coolant contamination.
- High mileage.
- Material ageing.
- Incorrect installation.
Renewing all gaskets during an engine rebuild restores the engine's sealing integrity and helps maximise service life.
When Should a Complete Engine Gasket Set Be Installed?
A complete engine gasket set should always be fitted
whenever:
- Performing a complete engine rebuild.
- Removing the cylinder heads.
- Replacing head gaskets.
- Reconditioning the engine.
- Repairing significant oil leaks.
- Repairing coolant leaks.
- Rebuilding a high-mileage engine.
- Carrying out preventative maintenance while the engine is dismantled.
Replacing every gasket during assembly helps eliminate future leaks, reduces repeat labour and ensures a professional-quality rebuild.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set features:
- Complete engine rebuild gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium heat-resistant sealing materials.
- Excellent resistance to engine oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Suitable for professional and enthusiast engine rebuilding.
- Long-lasting sealing performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9721
The product you are viewing cross references to these numbers
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 987 Boxster & Cayman 2.7ltr M97.20 (180kW / 245HP)
Carry out a professional engine rebuild with confidence
using this OE Match Complete Engine Gasket Set, specifically developed
for the Porsche 987 Boxster and Cayman 2.7ltr fitted with the M97.20 engine
producing 180kW (245HP).
Fits:
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
This comprehensive engine rebuild gasket kit contains the essential seals and gaskets required to completely rebuild your engine, including both cylinder head gaskets, making it the ideal solution for complete engine overhauls, cylinder head repairs, engine reconditioning and preventative maintenance.
Manufactured to original equipment specifications, every gasket and seal is precision engineered to provide excellent sealing performance, accurate fitment and long-lasting durability, helping restore your M97 engine to factory condition.
What Does a Complete Engine Gasket Set Do?
A complete engine gasket set provides all the major sealing components required during engine assembly to prevent leaks and maintain correct engine operation.
The gaskets and seals are designed to:
- Seal the combustion chambers.
- Maintain correct engine compression.
- Prevent oil leaks.
- Prevent coolant leaks.
- Separate oil and coolant galleries.
- Maintain correct engine operating pressures.
- Restore factory sealing performance throughout the engine.
Replacing every gasket during an engine rebuild ensures each sealing surface performs exactly as Porsche intended while helping maximise long-term reliability.
Why Replace the Complete Gasket Set?
Once an engine has been dismantled, the original gaskets become permanently compressed and should never be reused. Installing a complete gasket set ensures every sealing component is renewed, reducing the likelihood of future oil or coolant leaks.
A complete gasket set is recommended when carrying out:
- Complete engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Major oil leak repairs.
- Coolant leak repairs.
- High-mileage engine refurbishment.
- Preventative maintenance.
- Performance engine builds.
Replacing only selected gaskets can compromise the quality of the rebuild and increase the risk of future sealing problems.
Why Do Engine Gaskets Fail?
Engine gaskets operate under constant heat, pressure and thermal expansion throughout their service life.
Common causes of gasket deterioration include:
- Heat ageing.
- High mileage.
- Thermal cycling.
- Engine overheating.
- Oil contamination.
- Coolant contamination.
- Incorrect installation.
- Natural material fatigue.
Replacing every gasket during an engine rebuild restores sealing integrity and helps maximise engine longevity.
When Should a Complete Gasket Set Be Installed?
A complete engine gasket set should always be fitted
whenever:
- Performing a complete engine rebuild.
- Replacing cylinder head gaskets.
- Removing the cylinder heads.
- Reconditioning the engine.
- Repairing major oil leaks.
- Repairing coolant leaks.
- Carrying out preventative maintenance.
- Completing a professional engine overhaul.
Renewing every gasket during assembly helps prevent future leaks, reduces repeat labour and delivers a professional-quality rebuild.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine rebuild gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium sealing materials.
- Excellent resistance to heat, oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9720
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 997 Carrera S 3.8ltr M97.01 (261kW / 355HP)
Carry out a professional engine rebuild with confidence
using this OE Match Complete Engine Gasket Set, specifically developed
for the Porsche 997 Carrera S 3.8ltr fitted with the M97.01 engine producing
261kW (355HP).
Fits:
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
This comprehensive engine rebuild gasket kit contains the essential seals and gaskets required to completely rebuild the engine, including both cylinder head gaskets, making it the ideal choice for full engine overhauls, cylinder head repairs, engine reconditioning and preventative maintenance.
Manufactured to original equipment specifications, every gasket and seal is engineered to provide precise fitment, outstanding sealing performance and long-lasting durability, ensuring your rebuilt M97 engine delivers reliable performance and factory-quality sealing.
What Does a Complete Engine Gasket Set Do?
A complete engine gasket set contains all the major sealing components required during engine assembly to prevent leaks and maintain correct engine operation.
The gaskets and seals are designed to:
- Seal the combustion chambers.
- Maintain correct engine compression.
- Prevent oil leaks.
- Prevent coolant leaks.
- Separate oil and coolant passages.
- Maintain correct engine operating pressures.
- Restore factory sealing performance during an engine rebuild.
Replacing every gasket during an engine overhaul helps ensure a reliable, leak-free rebuild that performs as Porsche intended.
Why Replace the Complete Gasket Set?
Once an engine has been dismantled, the original gaskets and seals become compressed and should not be reused. Installing a complete gasket set ensures every sealing surface is renewed to OE standards.
A complete gasket set is recommended for:
- Complete engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Oil leak repairs.
- Coolant leak repairs.
- High-mileage engine refurbishment.
- Preventative maintenance.
- Performance engine builds.
Replacing only selected gaskets increases the risk of future leaks and can lead to additional labour costs later.
Why Do Engine Gaskets Fail?
Engine gaskets are subjected to continuous heat, pressure and thermal expansion throughout their service life.
Common causes of gasket deterioration include:
- Heat ageing.
- High mileage.
- Thermal cycling.
- Engine overheating.
- Oil contamination.
- Coolant contamination.
- Incorrect installation.
- Material fatigue over time.
Replacing all gaskets during an engine rebuild restores sealing integrity and helps maximise engine longevity.
When Should a Complete Gasket Set Be Installed?
A complete engine gasket set should always be installed
whenever:
- Carrying out a complete engine rebuild.
- Replacing cylinder head gaskets.
- Removing the cylinder heads.
- Reconditioning the engine.
- Repairing major oil leaks.
- Repairing coolant leaks.
- Performing preventative maintenance.
- Completing a professional engine overhaul.
Renewing every gasket during assembly helps prevent future leaks, reduces repeat labour and ensures a professional-quality rebuild.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine rebuild gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium sealing materials.
- Excellent resistance to heat, oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9701
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 987 Boxster S 3.2ltr M96.26
Carry out a complete engine rebuild with confidence using
this OE Match Complete Engine Gasket Set, specifically engineered for
the Porsche 987 Boxster S 3.2L (2005 onwards) fitted with the M96.26 engine
producing 206kW (280HP).
Fits:
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
This comprehensive engine rebuild gasket kit contains all the essential seals and gaskets required to professionally rebuild your engine, including both cylinder head gaskets. Manufactured to original equipment specifications, every gasket and seal is precision engineered to provide exceptional sealing performance, OE-quality fitment and long-lasting durability, helping restore your M96 engine to factory standards.
Whether you're carrying out a complete engine overhaul, replacing cylinder heads or rebuilding a high-mileage engine, this complete gasket set provides the components required for a reliable, professional repair.
What Does a Complete Engine Gasket Set Do?
An engine gasket set contains the essential sealing components required between the engine block, cylinder heads and ancillary components during assembly.
Its primary functions include:
- Sealing the combustion chambers.
- Maintaining correct engine compression.
- Preventing engine oil leaks.
- Preventing coolant leaks.
- Separating oil and coolant passages.
- Maintaining correct operating pressures.
- Restoring factory engine sealing performance.
Renewing every gasket during an engine rebuild helps ensure maximum reliability and reduces the risk of future leaks.
Why Replace the Complete Gasket Set?
Once an engine has been dismantled, the original gaskets become compressed and should not be reused. Installing a complete gasket set ensures every sealing surface is renewed and restored to OE standards.
A complete gasket set is recommended for:
- Complete engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Oil leak repairs.
- Coolant leak repairs.
- High mileage engine refurbishment.
- Preventative maintenance.
- Performance engine builds.
Replacing only selected gaskets often results in repeat labour and increases the likelihood of future sealing issues.
Why Do Engine Gaskets Fail?
Engine gaskets operate under extreme temperatures and pressures throughout their service life.
Common causes of failure include:
- Heat ageing.
- Thermal expansion and contraction.
- High mileage.
- Engine overheating.
- Oil contamination.
- Coolant contamination.
- Incorrect installation.
- Natural material fatigue.
Replacing every gasket during an engine rebuild restores sealing integrity and helps maximise engine reliability.
When Should a Complete Gasket Set Be Installed?
A complete engine gasket set should always be fitted
whenever:
- Performing a complete engine rebuild.
- Replacing cylinder head gaskets.
- Removing the cylinder heads.
- Reconditioning the engine.
- Repairing major oil leaks.
- Repairing coolant leaks.
- Carrying out preventative maintenance.
- Completing a professional engine overhaul.
Installing a complete gasket set during assembly helps prevent future leaks, reduces repeat labour and delivers a professional-quality rebuild.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine rebuild gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium sealing materials.
- Excellent resistance to heat, oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9626
The product you are viewing cross references to these numbers
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 987 Boxster 2.7L M96.25
Carry out a complete engine rebuild with confidence using
this OE Match Complete Engine Gasket Set, specifically engineered for
the Porsche 987 Boxster 2.7ltr (2005 onwards) fitted with the M96.25 engine
producing 176kW (239HP).
Fits:
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
This comprehensive engine rebuild gasket kit contains all the major seals and gaskets required to professionally overhaul your engine, including both cylinder head gaskets. Manufactured to original equipment specifications, every component is precision engineered to provide excellent sealing performance, accurate fitment and long-lasting reliability throughout the rebuilt engine.
Whether you're rebuilding a high-mileage engine, replacing cylinder head gaskets or carrying out a complete restoration, this OE Match gasket set provides everything needed to restore factory sealing performance.
What Does a Complete Engine Gasket Set Do?
An engine gasket set provides the essential sealing components required between critical engine parts during assembly.
Its primary functions include:
- Sealing the combustion chambers.
- Maintaining engine compression.
- Preventing oil leaks.
- Preventing coolant leaks.
- Separating coolant and oil galleries.
- Maintaining correct engine operating pressures.
- Restoring original engine sealing performance.
Replacing every gasket during an engine rebuild ensures each sealing surface performs exactly as Porsche intended.
Why Replace the Complete Gasket Set?
Engine gaskets are compressed during installation and should never be reused once the engine has been dismantled. Fitting a complete gasket set ensures every sealing component is renewed, reducing the likelihood of future leaks and improving long-term engine reliability.
A complete gasket set is recommended when carrying out:
- Complete engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Major oil leak repairs.
- Coolant leak repairs.
- High mileage engine refurbishment.
- Preventative maintenance.
- Performance engine builds.
Replacing only selected gaskets often results in additional labour and repeat repairs later.
Why Do Engine Gaskets Fail?
Engine gaskets are continually exposed to high temperatures, combustion pressures and thermal expansion.
Common causes of gasket failure include:
- Heat ageing.
- Thermal cycling.
- High mileage.
- Engine overheating.
- Oil contamination.
- Coolant contamination.
- Incorrect installation.
- Material fatigue over time.
Replacing all gaskets during an engine rebuild restores the sealing integrity of the engine and helps maximise reliability.
When Should a Complete Gasket Set Be Installed?
A complete engine gasket set should always be fitted
whenever:
- Performing a complete engine rebuild.
- Removing the cylinder heads.
- Replacing head gaskets.
- Reconditioning the engine.
- Repairing significant oil leaks.
- Repairing coolant leaks.
- Carrying out preventative maintenance.
- Completing a professional engine overhaul.
Installing a complete gasket set during assembly minimises the risk of future leaks and ensures the highest quality rebuild.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine rebuild gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium sealing materials.
- Excellent resistance to heat, oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9625
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 986 Boxster S 3.2L M96.24
Complete your Porsche engine rebuild with confidence using
this OE Match Complete Engine Gasket Set, specifically engineered for
the Porsche 986 Boxster S 3.2ltr (2003 onwards) fitted with the M96.24 engine
producing 191kW (260HP).
Fits:
- Porsche Boxster S 986 3.2L 2003-04
This comprehensive engine rebuild gasket kit contains the essential seals and gaskets required to fully rebuild your engine, including both cylinder head gaskets, making it the ideal choice for complete engine overhauls, cylinder head repairs, engine reconditioning and preventative maintenance.
Manufactured to original equipment specifications, every gasket and seal is designed to provide precise fitment, exceptional sealing performance and long-lasting durability, ensuring your rebuilt M96 engine performs reliably for many years.
What Does a Complete Engine Gasket Set Do?
An engine gasket set contains all the major sealing components required to rebuild the engine correctly and prevent leaks between critical mating surfaces.
Its primary functions include:
- Sealing the combustion chambers.
- Maintaining correct engine compression.
- Preventing engine oil leaks.
- Preventing coolant leaks.
- Separating oil and coolant passages.
- Maintaining correct engine operating pressures.
- Restoring factory sealing performance during engine assembly.
Replacing every gasket during an engine rebuild helps ensure maximum reliability while significantly reducing the risk of future oil or coolant leaks.
Why Replace the Complete Gasket Set?
During engine disassembly, original gaskets become compressed and permanently deformed, making them unsuitable for reuse. Installing a complete gasket set ensures every sealing surface is renewed to OE standards.
A complete gasket set is recommended for:
- Full engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Oil leak repairs.
- Coolant leak repairs.
- High mileage engine refurbishment.
- Preventative maintenance.
- Performance engine builds.
Replacing only selected gaskets can compromise the quality of the rebuild and increase the likelihood of future leaks.
Why Do Engine Gaskets Fail?
Engine gaskets are subjected to continuous heat, pressure and thermal expansion throughout their service life.
Common causes of failure include:
- Heat ageing.
- High mileage.
- Thermal cycling.
- Engine overheating.
- Oil contamination.
- Coolant contamination.
- Incorrect installation.
- Material fatigue over time.
Renewing every gasket during an engine rebuild restores the engine's sealing integrity and helps maximise long-term reliability.
When Should a Complete Gasket Set Be Installed?
A complete engine gasket set should always be fitted
whenever:
- Carrying out a complete engine rebuild.
- Replacing cylinder head gaskets.
- Removing the cylinder heads.
- Reconditioning the engine.
- Repairing significant oil leaks.
- Repairing coolant leaks.
- Performing preventative maintenance.
- Completing a professional engine overhaul.
Replacing every gasket during assembly reduces repeat labour, improves engine reliability and delivers a professional-quality rebuild.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine rebuild gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium sealing materials.
- Excellent resistance to heat, oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9624
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 2003-04
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 986 Boxster 2.7L M96.23
Carry out a professional engine rebuild with confidence
using this OE Match Complete Engine Gasket Set, specifically developed
for the Porsche 986 Boxster 2.7ltr (2003 onwards) fitted with the M96.23
engine producing 168kW (228HP).
Fits:
- Porsche Boxster 986 2.7L 1999-02
This comprehensive engine rebuild gasket kit contains the essential seals and gaskets required to completely rebuild the engine, including both cylinder head gaskets, making it the ideal solution for complete engine overhauls, cylinder head repairs, engine reconditioning and preventative maintenance.
Manufactured to original equipment specifications, every gasket and seal is engineered to provide precise fitment, excellent sealing performance and long-term durability, ensuring your rebuilt M96 engine performs reliably for years to come.
What Does a Complete Engine Gasket Set Do?
An engine gasket set provides all the primary sealing components required during engine assembly, ensuring every critical mating surface is correctly sealed.
The gaskets and seals are designed to:
- Seal the combustion chambers.
- Maintain correct engine compression.
- Prevent oil leaks.
- Prevent coolant leaks.
- Separate oil and coolant galleries.
- Maintain correct engine operating pressures.
- Restore factory sealing performance during an engine rebuild.
Using a complete gasket set ensures every major sealing component is renewed, reducing the likelihood of future leaks and improving the overall reliability of the engine rebuild.
Why Replace the Complete Gasket Set?
During engine disassembly, original gaskets become compressed and cannot reliably be reused. Replacing every gasket during rebuilding ensures maximum sealing integrity and reduces the risk of future oil or coolant leaks.
A complete gasket set is recommended for:
- Full engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Oil leak repairs.
- Coolant leak repairs.
- Preventative maintenance.
- High mileage engine refurbishment.
- Performance engine builds.
Replacing individual gaskets while leaving older seals in place can compromise the quality and longevity of the rebuild.
Why Do Engine Gaskets Fail?
Engine gaskets operate under extreme temperatures and pressures while constantly expanding and contracting during engine operation.
Common causes of failure include:
- Heat ageing.
- High mileage.
- Thermal cycling.
- Oil contamination.
- Coolant contamination.
- Engine overheating.
- Incorrect installation.
- Natural material fatigue.
Replacing all gaskets during an engine rebuild ensures every sealing surface is restored to original specification.
When Should a Complete Gasket Set Be Installed?
A complete engine gasket set should always be installed
whenever:
- Rebuilding the engine.
- Replacing cylinder head gaskets.
- Removing the cylinder heads.
- Reconditioning the engine.
- Repairing major oil leaks.
- Repairing coolant leaks.
- Carrying out preventative maintenance.
- Performing a complete engine overhaul.
Renewing every gasket during assembly helps prevent future leaks, reduces repeat labour and ensures long-term engine reliability.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine overhaul gasket kit.
- Includes both cylinder head gaskets.
- Manufactured to OE specifications.
- Premium sealing materials.
- Excellent resistance to heat, oil and coolant.
- Precision-engineered fitment.
- Direct replacement components.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9623
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 2003-04
Shop Securely
12 Month Warranty
Worldwide Delivery
OE Match Complete Engine Gasket Set with Head Gaskets for Porsche 986 Boxster 2.7ltr M96.22
Carry out a professional engine rebuild with confidence
using this OE Match Complete Engine Gasket Set, specifically developed
for the Porsche 986 Boxster 2.7ltr fitted with the M96.22 engine
producing 162kW (220HP).
Fits:
- Porsche Boxster 986 2.7L 1999-02
This comprehensive engine rebuild gasket kit contains the essential seals and gaskets required to completely rebuild the engine, including both cylinder head gaskets, making it the ideal choice for full engine overhauls, rebuilds, cylinder head repairs and preventative maintenance.
Manufactured to original equipment specifications, every gasket and seal is designed to provide the precise fit, sealing performance and long-term durability required to restore factory engine reliability.
What Does a Complete Engine Gasket Set Do?
An engine gasket set provides all the major sealing components required to prevent leaks between mating engine surfaces during assembly.
The gaskets and seals are designed to:
- Seal combustion chambers.
- Maintain engine compression.
- Prevent oil leaks.
- Prevent coolant leaks.
- Separate oil and coolant passages.
- Maintain correct engine operating pressure.
- Restore factory sealing performance during an engine rebuild.
Using a complete gasket set ensures all major sealing components are renewed at the same time, helping achieve a reliable, long-lasting rebuild.
Why Replace the Complete Gasket Set?
During engine disassembly, many original gaskets become compressed or damaged and cannot be reused. Replacing every gasket during rebuilding ensures optimum sealing and reduces the risk of future oil or coolant leaks.
Common reasons for fitting a complete gasket set include:
- Full engine rebuilds.
- Cylinder head replacement.
- Engine reconditioning.
- Oil leak repairs.
- Coolant leak repairs.
- Preventative maintenance.
- High mileage engine refurbishment.
- Performance engine builds.
Replacing individual gaskets while reusing older seals can compromise the quality and longevity of the rebuild.
Why Do Engine Gaskets Fail?
Engine gaskets are exposed to extreme temperatures, pressure and constant thermal cycling. Over time they naturally deteriorate.
Common causes include:
- Heat ageing.
- High mileage.
- Repeated thermal expansion and contraction.
- Oil contamination.
- Coolant contamination.
- Incorrect installation.
- Engine overheating.
- General material fatigue.
Renewing every gasket during an engine rebuild ensures the engine is properly sealed from the outset.
When Should a Complete Gasket Set Be Installed?
This complete engine gasket set should be used whenever:
- Rebuilding the engine.
- Replacing cylinder head gaskets.
- Removing the cylinder heads.
- Reconditioning the engine.
- Repairing major oil leaks.
- Repairing coolant leaks.
- Carrying out preventative engine maintenance.
- Performing a complete engine overhaul.
Installing a complete gasket set during engine assembly minimises future labour costs and maximises long-term reliability.
OE Match Quality You Can Trust
This OE Match Complete Engine Gasket Set offers:
- Complete engine overhaul gasket kit.
- Includes cylinder head gaskets.
- Manufactured to OE specifications.
- Precision-engineered sealing materials.
- Excellent resistance to heat and oil.
- Direct-fit replacement.
- High-quality sealing performance.
- Ideal for professional engine rebuilding.
- Long service life and dependable reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9622
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 1999-02
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine re-build complete gasket set, INCLUDING head gaskets This kit is made with very high-quality gaskets, and are complete gasket sets to complete the job.
The OE Match Engine Gasket Set is a premium-quality replacement sealing kit designed to restore the sealing integrity of compatible Porsche engines during repairs, rebuilds and major servicing. Manufactured to OE specifications for fit, material quality and durability, this comprehensive gasket set contains the essential gaskets and seals required to prevent oil, coolant and compression leaks while maintaining optimum engine performance and long-term reliability.
Fits:
- Porsche Boxster S 986 3.2L 1999-02
Manufactured from premium-quality composite gasket materials, high-temperature elastomers and precision-engineered sealing components, the kit is designed to withstand extreme engine temperatures, high combustion pressures and continual exposure to engine oil and coolant. Precision-cut for direct OE-style installation, each gasket provides an accurate fit to ensure dependable sealing across critical engine assemblies, making the kit ideal for professional engine rebuilds and preventative maintenance.
What This Product Does:
- Provides reliable sealing between critical engine components.
- Prevents oil, coolant and combustion gas leaks.
- Maintains correct engine compression and efficiency.
- Supports proper lubrication and cooling system operation.
- Protects the engine from contamination and fluid loss.
- Restores factory sealing performance during engine repairs.
- Supplies essential gaskets for comprehensive engine servicing.
- Forms an integral part of the engine sealing system.
Symptoms Of Wear Or Failure:
- Engine oil leaks.
- Coolant leaks.
- Loss of engine compression.
- Engine overheating caused by coolant loss.
- White exhaust smoke indicating coolant entering the combustion chamber.
- Oil and coolant contamination.
- Reduced engine performance.
- Increased engine oil consumption.
- Visible gasket deterioration during engine servicing.
- Persistent fluid leaks following engine disassembly.
Why Replacement Matters:
- Engine gaskets are subjected to constant thermal cycling, high internal pressures and prolonged exposure to oil, coolant and combustion gases. Over time, gasket materials naturally compress, harden or deteriorate, reducing their ability to maintain an effective seal between engine components.
- Failing gaskets can lead to fluid leaks, loss of compression, overheating and contamination of vital engine systems. Continued operation with damaged gaskets can accelerate engine wear and result in expensive repairs. During any major engine repair or rebuild, replacing all sealing components is essential to ensure reliable long-term performance and avoid repeat labour.
- Replacing worn gaskets with the OE Match Engine Gasket Set restores the engine's sealing integrity and helps maintain reliable operation throughout the entire engine assembly. Manufactured to OE standards using premium sealing materials, the 999100M9621 kit provides factory-style fitment, long-lasting durability and dependable performance, making it the ideal solution for Porsche engine rebuilds, servicing and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9621
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine re-build complete gasket set, INCLUDING head gaskets This kit is made with very high quality gaskets, and are complete gasket sets to complete the job.
The OE Match Engine Gasket Set is a premium-quality replacement sealing kit designed to restore the sealing integrity of compatible Porsche engines during repairs, rebuilds and major servicing. Manufactured to OE specifications for fit, material quality and durability, this comprehensive gasket set contains the essential gaskets and seals required to prevent oil, coolant and compression leaks while maintaining optimum engine performance and long-term reliability.
Fits:
- Porsche Boxster 986 2.5L 1997-99
Manufactured from premium-quality composite gasket materials, high-temperature elastomers and precision-engineered sealing components, the kit is designed to withstand extreme engine temperatures, high combustion pressures and continual exposure to engine oil and coolant. Precision-cut for direct OE-style installation, each gasket provides an accurate fit to ensure dependable sealing across critical engine assemblies, making the kit ideal for professional engine rebuilds and preventative maintenance.
Why Replacement Matters:
- Provides reliable sealing between critical engine components.
- Prevents oil, coolant and combustion gas leaks.
- Maintains correct engine compression and efficiency.
- Supports proper lubrication and cooling system operation.
- Protects the engine from contamination and fluid loss.
- Restores factory sealing performance during engine repairs.
- Supplies essential gaskets for comprehensive engine servicing.
- Forms an integral part of the engine sealing system.
Symptoms Of Wear Or Failure:
- Engine oil leaks.
- Coolant leaks.
- Loss of engine compression.
- Engine overheating caused by coolant loss.
- White exhaust smoke indicating coolant entering the combustion chamber.
- Oil and coolant contamination.
- Reduced engine performance.
- Increased engine oil consumption.
- Visible gasket deterioration during engine servicing.
- Persistent fluid leaks following engine disassembly.
Why Replacement Matters:
- Engine gaskets are subjected to constant thermal cycling, high internal pressures and prolonged exposure to oil, coolant and combustion gases. Over time, gasket materials naturally compress, harden or deteriorate, reducing their ability to maintain an effective seal between engine components.
- Failing gaskets can lead to fluid leaks, loss of compression, overheating and contamination of vital engine systems. Continued operation with damaged gaskets can accelerate engine wear and result in expensive repairs. During any major engine repair or rebuild, replacing all sealing components is essential to ensure reliable long-term performance and avoid repeat labour.
- Replacing worn gaskets with the OE Match Engine Gasket Set restores the engine's sealing integrity and helps maintain reliable operation throughout the entire engine assembly. Manufactured to OE standards using premium sealing materials, the 999100M9620 kit provides factory-style fitment, long-lasting durability and dependable performance, making it the ideal solution for Porsche engine rebuilds, servicing and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9620
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine re-build complete gasket set, INCLUDING head gaskets This kit is made with very high-quality gaskets, and are complete gasket sets to complete the job.
The OE Match Engine Gasket Set is a premium-quality replacement sealing kit designed to restore the sealing integrity of compatible Porsche engines during repairs, rebuilds and major servicing. Manufactured to OE specifications for fit, material quality and durability, this comprehensive gasket set contains the essential gaskets and seals required to prevent oil, coolant and compression leaks while maintaining optimum engine performance and long-term reliability.
Fits:
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
Manufactured from premium-quality composite gasket materials, high-temperature elastomers and precision-engineered sealing components, the kit is designed to withstand extreme engine temperatures, high combustion pressures and continual exposure to engine oil and coolant. Precision-cut for direct OE-style installation, each gasket provides an accurate fit to ensure dependable sealing across critical engine assemblies, making the kit ideal for professional engine rebuilds and preventative maintenance.
What This Product Does:
- Provides reliable sealing between critical engine components.
- Prevents oil, coolant and combustion gas leaks.
- Maintains correct engine compression and efficiency.
- Supports proper lubrication and cooling system operation.
- Protects the engine from contamination and fluid loss.
- Restores factory sealing performance during engine repairs.
- Supplies essential gaskets for comprehensive engine servicing.
- Forms an integral part of the engine sealing system.
Symptoms Of Wear Or Failure:
- Engine oil leaks.
- Coolant leaks.
- Loss of engine compression.
- Engine overheating caused by coolant loss.
- White exhaust smoke indicating coolant entering the combustion chamber.
- Oil and coolant contamination.
- Reduced engine performance.
- Increased engine oil consumption.
- Visible gasket deterioration during engine servicing.
- Persistent fluid leaks following engine disassembly.
Why Replacement Matters:
- Engine gaskets are subjected to constant thermal cycling, high internal pressures and prolonged exposure to oil, coolant and combustion gases. Over time, gasket materials naturally compress, harden or deteriorate, reducing their ability to maintain an effective seal between engine components.
- Failing gaskets can lead to fluid leaks, loss of compression, overheating and contamination of vital engine systems. Continued operation with damaged gaskets can accelerate engine wear and result in expensive repairs. During any major engine repair or rebuild, replacing all sealing components is essential to ensure reliable long-term performance and avoid repeat labour.
- Replacing worn gaskets with the OE Match Engine Gasket Set restores the engine's sealing integrity and helps maintain reliable operation throughout the entire engine assembly. Manufactured to OE standards using premium sealing materials, the 999100M9605 kit provides factory-style fitment, long-lasting durability and dependable performance, making it the ideal solution for Porsche engine rebuilds, servicing and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9605
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine re-build complete gasket set, INCLUDING head gaskets This kit is made with very high-quality gaskets, and are complete gasket sets to complete the job.
The OE Match Engine Gasket Set is a premium-quality replacement sealing kit designed to restore the sealing integrity of compatible Porsche engines during repairs, rebuilds and major servicing. Manufactured to OE specifications for fit, material quality and durability, this comprehensive gasket set contains the essential gaskets and seals required to prevent oil, coolant and compression leaks while maintaining optimum engine performance and long-term reliability.
Fits:
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Manufactured from premium-quality composite gasket materials, high-temperature elastomers and precision-engineered sealing components, the kit is designed to withstand extreme engine temperatures, high combustion pressures and continual exposure to engine oil and coolant. Precision-cut for direct OE-style installation, each gasket provides an accurate fit to ensure dependable sealing across critical engine assemblies, making the kit ideal for professional engine rebuilds and preventative maintenance.
What This Product Does:
- Provides reliable sealing between critical engine components.
- Prevents oil, coolant and combustion gas leaks.
- Maintains correct engine compression and efficiency.
- Supports proper lubrication and cooling system operation.
- Protects the engine from contamination and fluid loss.
- Restores factory sealing performance during engine repairs.
- Supplies essential gaskets for comprehensive engine servicing.
- Forms an integral part of the engine sealing system.
Symptoms Of Wear Or Failure:
- Engine oil leaks.Coolant leaks.
- Loss of engine compression.
- Engine overheating caused by coolant loss.
- White exhaust smoke indicating coolant entering the combustion chamber.
- Oil and coolant contamination.
- Reduced engine performance.
- Increased engine oil consumption.
- Visible gasket deterioration during engine servicing.
- Persistent fluid leaks following engine disassembly.
Why Replacement Matters:
- Engine gaskets are subjected to constant thermal cycling, high internal pressures and prolonged exposure to oil, coolant and combustion gases. Over time, gasket materials naturally compress, harden or deteriorate, reducing their ability to maintain an effective seal between engine components.
- Failing gaskets can lead to fluid leaks, loss of compression, overheating and contamination of vital engine systems. Continued operation with damaged gaskets can accelerate engine wear and result in expensive repairs. During any major engine repair or rebuild, replacing all sealing components is essential to ensure reliable long-term performance and avoid repeat labour.
- Replacing worn gaskets with the OE Match Engine Gasket Set restores the engine's sealing integrity and helps maintain reliable operation throughout the entire engine assembly. Manufactured to OE standards using premium sealing materials, the 999100M9603 kit provides factory-style fitment, long-lasting durability and dependable performance, making it the ideal solution for Porsche engine rebuilds, servicing and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9603
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine re-build complete gasket set, INCLUDING head gaskets.
This kit is made with very high quality gaskets, and are complete gasket sets to complete the job.
The OE Match Engine Gasket Set is a premium-quality replacement sealing kit designed to restore the integrity of compatible Porsche engines during repairs, rebuilds or major servicing. Manufactured to OE specifications for fit, material quality and durability, this comprehensive gasket set provides the essential seals required to prevent oil, coolant and compression leaks while maintaining optimum engine performance and reliability.
Fits:
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Manufactured using premium-quality gasket materials selected for their resistance to heat, pressure, engine oil, coolant and fuel, the components are engineered to withstand the demanding operating conditions of modern and classic Porsche engines. Precision-cut for accurate OE-style fitment, the gasket set helps ensure reliable sealing across multiple engine assemblies, making it ideal for professional engine rebuilds, overhauls and preventative maintenance.
What This Product Does:
- Provides reliable sealing between critical engine components.
- Prevents oil, coolant and compression leaks.
- Maintains correct engine compression and efficiency.
- Supports proper lubrication and cooling system operation.
- Protects the engine from contamination and fluid loss.
- Restores factory sealing performance during engine repairs.
- Includes essential gaskets for comprehensive engine servicing.
- Forms an integral part of the engine sealing system.
Symptoms Of Wear Or Failure:
- Engine oil leaks.
- Coolant leaks.
- Overheating caused by coolant loss.
- White exhaust smoke indicating coolant entering the combustion chamber.
- Low engine compression.
- Mixing of oil and coolant.
- Visible gasket deterioration during servicing.
- Loss of engine performance.
- Increased oil consumption.
- Persistent fluid leaks after component removal or rebuilds.
Why Replacement Matters:
- Engine gaskets operate under extreme temperatures, high pressures and continual thermal expansion and contraction. Over time, gasket materials can harden, compress or deteriorate, reducing their ability to maintain an effective seal between engine components.
- Failing gaskets can allow oil, coolant or combustion gases to escape, resulting in reduced engine performance, overheating, fluid contamination and accelerated internal engine wear. During any engine rebuild or major repair, replacing all relevant gaskets is essential to ensure long-term reliability and avoid repeat labour.
- Replacing worn gaskets with the OE Match Engine Gasket Set restores the engine's sealing integrity and helps ensure reliable operation throughout the entire engine assembly. Manufactured to OE standards using premium sealing materials, this complete gasket set provides factory-style fitment, long-lasting durability and dependable performance, making it the ideal solution for Porsche engine rebuilds, servicing and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
999100M9601
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Rear Bumper Deco Profile Beading is a premium-quality replacement decorative beading designed to fit the rear bumper trim on compatible classic Porsche models. Manufactured to OE specifications for fit, profile and durability, this profile beading restores the factory appearance of the rear bumper while providing a neat transition between the decorative trim and bumper assembly.
Fits:
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram Ref No 36
Manufactured from premium automotive-grade rubber, the beading offers excellent resistance to UV exposure, ozone, moisture, road salt and temperature extremes. Precision-profiled to replicate the original factory design, it provides an accurate OE-style fit and long-lasting flexibility, making it the ideal choice for restoration projects or replacing worn, cracked or faded original bumper beading.
What This Product Does:
- Restores the original appearance of the rear bumper trim.
- Creates a neat finish between bumper decorative components.
- Helps cushion and protect adjoining trim pieces.
- Reduces vibration and rattling from the bumper trim.
- Helps prevent dirt and moisture from collecting behind the trim.
- Maintains factory-style fitment and alignment.
- Enhances the appearance of the rear bodywork.
- Forms an integral part of the rear bumper trim assembly.
Symptoms Of Wear Or Failure:
- Cracked, split or hardened rubber.
- Faded or discoloured appearance.
- Shrinking or distortion of the beading.
- Loose or detached trim.
- Visible gaps between bumper trim components.
- Perished rubber caused by age or UV exposure.
- Increased vibration or rattling from the bumper.
- Dirt and moisture collecting behind the trim.
- Reduced cosmetic appearance of the rear bumper.
- Missing sections of the profile beading.
Why Replacement Matters:
- The rear bumper profile beading is constantly exposed to sunlight, rain, road spray, temperature fluctuations and minor impacts. Over time, the rubber can become brittle, crack, shrink or lose its flexibility, reducing both its sealing ability and its cosmetic appearance.
- A deteriorated beading can allow moisture and debris to accumulate behind the bumper trim, increasing the risk of corrosion while also allowing decorative trim components to loosen or vibrate. This can detract from the original appearance of the vehicle, particularly on classic Porsche models where exterior trim details are an important part of an authentic restoration.
- Replacing worn or damaged rear bumper profile beading restores the factory finish and helps protect the bumper trim assembly from environmental damage and vibration. The OE Match replacement provides precise OE-style fitment, premium-quality rubber construction and long-lasting durability, making it the ideal choice for Porsche restoration, repair and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64450543305
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Front Wide Trim Bumper Deco Rubber Insert is a premium-quality replacement rubber insert designed to fit the front wide bumper decorative trim on compatible classic Porsche models. Manufactured to OE specifications for fit, profile and durability, this insert restores the original appearance of the bumper while providing protection against minor impacts and helping to prevent dirt and moisture from collecting within the trim assembly.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Diagram Ref No 7
Manufactured from premium automotive-grade EPDM rubber, the insert offers excellent resistance to UV exposure, ozone, moisture, road salt and temperature extremes. Precision-profiled to replicate the original factory design, it fits securely into the front bumper deco trim, delivering a factory-correct finish that is ideal for restoration projects or replacing aged, cracked or faded original inserts.
What This Product Does:
- Restores the original appearance of the front bumper trim.
- Fits securely into the wide decorative bumper moulding.
- Provides a protective buffer against minor knocks and scuffs.
- Helps reduce vibration between bumper trim components.
- Prevents dirt and moisture from collecting within the trim.
- Maintains factory-style fitment and alignment.
- Enhances the overall appearance of the front bumper.
- Forms an integral part of the exterior bumper trim system.
Symptoms Of Wear Or Failure:
- Cracked, split or hardened rubber.
- Faded or discoloured appearance.
- Shrinking or distortion of the insert.
- Loose or detached trim insert.
- Visible gaps within the bumper moulding.
- Perished rubber caused by age or UV exposure.
- Increased vibration or rattling from the bumper trim.
- Dirt and moisture accumulating behind the insert.
- Reduced cosmetic appearance of the bumper.
- Missing sections of the rubber insert.
Why Replacement Matters:
- The front bumper rubber insert is continually exposed to sunlight, rain, road debris, temperature changes and minor impacts. Over time, the rubber can harden, crack, shrink or fade, reducing both its protective function and the appearance of the bumper assembly.
- A deteriorated insert can allow moisture and dirt to become trapped within the bumper trim, potentially contributing to corrosion of surrounding components while detracting from the vehicle's original factory appearance. Loose or damaged inserts may also create vibration or rattling noises during driving.
- Replacing a worn or damaged bumper rubber insert restores the factory finish and helps protect the decorative bumper trim from everyday wear. The OE Match replacement provides precise OE-style fitment, premium EPDM rubber construction and long-lasting durability, making it the ideal solution for Porsche restoration, repair and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90150540551
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE Match Rear End Cap for Wide Deco Sill / Rocker is a premium-quality replacement trim component designed to finish and protect the rear section of the wide sill (rocker) moulding on compatible classic Porsche models. Manufactured to OE specifications for fit, profile and durability, these end caps provide a neat factory-style finish while helping to shield the ends of the rocker trim from dirt, moisture and impact damage.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Diagram Ref No 29
Manufactured from high-quality automotive-grade material with excellent resistance to UV exposure, weathering and road debris, each end cap is precision-moulded to replicate the original Porsche design. Designed for direct OE-style installation, they fit seamlessly with the wide decorative sill moulding, making them ideal for restoration projects or replacing damaged or missing originals.
What This Product Does:
- Finishes the rear end of the wide rocker/sill moulding.
- Protects the sill trim from impact and environmental damage.
- Helps prevent dirt and moisture from entering the trim assembly.
- Completes the factory appearance of the lower bodywork.
- Provides secure OE-style fitment.
- Helps maintain correct alignment of the rocker moulding.
- Replaces worn, damaged or missing end caps.
- Forms an integral part of the exterior body trim system.
Symptoms Of Wear Or Failure:
- Missing or broken end cap.
- Cracks or impact damage.
- Loose or poorly fitting trim.
- Faded, scratched or weathered finish.
- Gaps at the end of the rocker moulding.
- Dirt and moisture entering behind the sill trim.
- Increased vibration or rattling from the moulding.
- Corrosion developing around the sill trim area.
- Reduced originality of the vehicle's exterior.
- Poor cosmetic appearance following restoration.
Why Replacement Matters:
- The rear rocker end caps are continuously exposed to road spray, stone impacts, UV radiation and changing weather conditions. Over time, they can become cracked, worn or detached, leaving the ends of the sill moulding exposed to moisture and debris.
- A damaged or missing end cap can allow dirt and water to accumulate behind the rocker trim, increasing the risk of corrosion while detracting from the vehicle's factory appearance. Loose trim may also vibrate during driving, potentially causing damage to surrounding bodywork or moulding components.
- Replacing worn or damaged rear end caps restores the original finish of the rocker moulding while helping to protect the sill assembly from environmental damage. The OE Match replacements provide factory-style fitment, durable construction and long-lasting performance, making them an excellent choice for Porsche restoration, repair and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90155911
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed