Electronic Fuel Injection Throttle Kits

Rennen Camshaft Position Sensor for Rennen by JSR Individual Barrel Throttle Body Upgrades

The Rennen Camshaft Position Sensor (CMP Sensor) is a critical engine management component designed specifically for use with Rennen by JSR Individual Barrel Throttle Body (ITB) upgrades. Working alongside the Crankshaft Position Sensor, the camshaft sensor provides the ECU with precise information regarding camshaft position and engine cycle synchronisation, allowing modern engine management systems to control fuel injection and ignition timing with maximum accuracy.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50

When upgrading a Porsche engine to Rennen by JSR Barrel ITBs and standalone engine management, accurate engine position data becomes essential. While the crankshaft sensor identifies engine speed and crank position, the camshaft position sensor tells the ECU exactly which cylinder is on its firing cycle. This information allows advanced ECU strategies such as sequential fuel injection and cylinder-specific ignition mapping.

For high-performance road, track and motorsport Porsche engines, the camshaft position sensor is a key component in unlocking the full potential of an Individual Throttle Body conversion.

What Does a Camshaft Position Sensor Do?

The camshaft position sensor continuously monitors the position of the camshaft and transmits this information to the ECU.

The ECU uses this data to determine:

• Cylinder identification
• Camshaft position
• Engine cycle synchronisation
• Sequential fuel injection timing
• Ignition event timing
• Engine start-up strategy
• Advanced engine management functions

A properly functioning camshaft sensor helps provide:

• Accurate fuel delivery
• Improved ignition control
• Faster engine starting
• Enhanced throttle response
• Stable idle quality
• Improved drivability
• Greater tuning precision

The sensor enables the ECU to know exactly where the engine is within its operating cycle.

Why Is a Camshaft Position Sensor Essential for ITB Conversions?

Rennen by JSR Barrel Throttle Body systems are designed to maximise engine performance and responsiveness. To fully exploit these benefits, modern programmable engine management systems require highly accurate engine position information.

The camshaft position sensor allows:

• Sequential fuel injection operation
• Cylinder-specific ignition timing
• Improved cold-start performance
• Enhanced fuel economy
• Smoother idle characteristics
• More precise tuning control
• Improved emissions control where applicable

Without a camshaft position sensor, many ECUs are forced to operate in less sophisticated batch-fire fuel injection modes, reducing the overall refinement and efficiency of the engine.

Why Are Barrel ITB Upgrades So Popular?

Rennen by JSR Barrel Throttle Bodies are engineered to deliver exceptional airflow and a truly engaging driving experience.

Benefits include:

• Instant throttle response
• Increased airflow capacity
• Improved engine breathing
• Enhanced power and torque potential
• Motorsport-inspired induction sound
• Greater tuning flexibility
• Improved driver engagement
• Stunning engine bay appearance

When combined with accurate crankshaft and camshaft position monitoring, the system delivers professional-level engine management performance.

Why Choose the Rennen Camshaft Position Sensor?

Developed specifically for Rennen by JSR ITB applications, this sensor provides the accuracy and reliability required for advanced ECU calibration.

Benefits include:

• Accurate camshaft position measurement
• Supports sequential fuel injection
• Enables advanced ECU functionality
• Improves engine synchronisation
• Enhances drivability
• Supports high-performance tuning
• Suitable for road and motorsport applications
• Reliable long-term operation       

Rennen ITG Classic Mesh Air Filter Set for Rennen by JSR Individual Barrel Throttle Body Upgrades

The Rennen ITG Classic Mesh Air Filter Set is a bespoke six-piece filtration package designed specifically for Rennen by JSR Individual Barrel Throttle Body systems. Each filter is engineered to fit directly onto the Rennen velocity stacks, combining classic motorsport styling with practical engine protection.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93

These filters use a mesh and foam construction to help protect the engine from dust, debris and airborne contaminants while allowing the ITB system to retain its free-flowing induction characteristics. The result is a period-inspired appearance with the essential filtration needed for road, fast-road and performance use.

Designed to complement the visual appeal of exposed velocity stacks, this filter set is ideal for Porsche owners who want the classic race-engine look while still helping protect valuable internal engine components.

What Do Classic Mesh Air Filters Do?

The air filters sit directly over the velocity stacks and filter incoming air before it enters the throttle bodies and combustion chambers.

They help provide:

• Protection from dust and debris
• Reduced risk of engine contamination
• Improved engine longevity
• Cleaner intake airflow
• Protection for cylinders, rings and valves
• Classic motorsport-inspired appearance
• Practical filtration for ITB conversions

Without suitable filtration, exposed velocity stacks can allow harmful particles to enter the engine.

Why Are Air Filters Needed with Barrel Throttle Bodies?

Rennen by JSR Barrel Throttle Bodies are designed for maximum airflow and instant throttle response. However, the open intake design means air is drawn directly into each throttle body.

Adding the correct filter set helps:

• Protect expensive engine internals
• Reduce premature engine wear
• Maintain reliable performance
• Support consistent tuning
• Preserve the benefits of velocity stacks
• Improve long-term durability
• Make the conversion more practical for road use

For any road-driven ITB-equipped Porsche, air filtration should be considered an essential part of the upgrade.

Why Choose the Rennen ITG Classic Mesh Filter Set?

This filter set is developed to fit Rennen velocity stacks correctly, offering a clean installation and authentic performance appearance.

Benefits include:

• Bespoke fit for Rennen velocity stacks
• Set of 6 individual filters
• Mesh and foam construction
• Classic exposed-stack styling
• Practical filtration protection
• Lightweight and compact design
• Ideal for Porsche ITB conversions
• Suitable for performance road and motorsport-style builds

Why Are Barrel ITB Upgrades So Popular?

Rennen by JSR Individual Barrel Throttle Bodies are one of the most desirable upgrades for naturally aspirated Porsche engines.

Benefits include:

• Instant throttle response
• Improved airflow efficiency
• Enhanced engine breathing
• Stronger performance potential
• Distinctive induction sound
• Greater tuning flexibility
• Motorsport-inspired engine bay appearance
• More engaging driving experience

The Classic Mesh Air Filter Set allows owners to enjoy the look and sound of velocity stacks while adding important engine protection.

Rennen Crankshaft Position Sensor (CPS) for Rennen by JSR Individual Barrel Throttle Body Upgrades

The Rennen Crankshaft Position Sensor (CPS) is one of the most important components within a modern engine management system and an essential part of any Rennen by JSR Individual Barrel Throttle Body (ITB) conversion. The sensor continuously monitors crankshaft position and engine speed, providing the ECU with the precise information required to control ignition timing, fuel injection events and overall engine operation.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50

When upgrading a Porsche engine to Individual Barrel Throttle Bodies and standalone engine management, accurate engine position data becomes critical. The ECU relies on the Crankshaft Position Sensor as its primary reference point for engine synchronisation. Without a reliable crankshaft signal, the ECU cannot accurately determine engine speed or crankshaft position, making precise ignition and fuel control impossible.

Whether you're building a fast road Porsche, a high-performance air-cooled engine or a dedicated motorsport application, the CPS provides the foundation for accurate ECU calibration and maximum engine performance.

What Does a Crankshaft Position Sensor Do?

The Crankshaft Position Sensor monitors the exact rotational position and speed of the engine crankshaft.

The sensor transmits this information directly to the ECU, allowing it to determine:

• Engine speed (RPM)
• Crankshaft position
• Ignition timing events
• Fuel injection timing
• Engine synchronisation
• Rev limiting functions
• Starting and idle control strategies

A properly functioning CPS helps provide:

• Accurate ignition timing
• Precise fuel delivery
• Reliable engine starting
• Smooth idle operation
• Stable engine performance
• Improved drivability
• Consistent ECU operation

The crankshaft sensor effectively serves as the heartbeat of the engine management system.

Why Is a CPS Essential for ITB Conversions?

Rennen by JSR Barrel Throttle Body conversions are typically paired with modern programmable engine management systems to unlock their full performance potential.

For the ECU to operate correctly, it must know the precise position of the crankshaft at all times. The CPS provides this information continuously and with extreme accuracy.

This allows:

• Sequential fuel injection control
• Accurate ignition timing maps
• Stable idle quality
• Improved throttle response
• Faster ECU processing
• Enhanced tuning accuracy
• Reliable high-RPM operation

Without a crankshaft position signal, the ECU simply cannot determine when to fire injectors or ignition coils.

Why Are Barrel ITB Upgrades So Popular?

Rennen by JSR Barrel Throttle Bodies are engineered to maximise airflow while delivering an authentic motorsport driving experience.

Benefits include:

• Instant throttle response
• Increased airflow efficiency
• Improved engine breathing
• Enhanced power and torque potential
• Exceptional induction sound Increased driver engagement
• Modern EFI compatibility
• Stunning engine bay appearance

When combined with accurate crankshaft position monitoring, standalone engine management and professional calibration, the result is a highly responsive and exceptionally capable Porsche engine.

Why Choose the Rennen CPS?

Developed specifically for Rennen by JSR ITB applications, the sensor delivers the accuracy and reliability required for professional engine management installations.

Benefits include:

• Precise crankshaft position measurement
• Accurate engine speed monitoring
• Supports standalone ECU systems
• Essential for EFI conversions
• Improves ignition timing accuracy
• Supports sequential fuel injection
• Suitable for road and motorsport applications
• Reliable long-term performance       

Drive By Wire Actuator Assembly for Individual Throttle Body (ITB) Systems

The Rennen by JSR Drive By Wire (DBW) Actuator Assembly is a precision-engineered component designed specifically for use with Rennen by JSR Individual Throttle Body (ITB) conversions. This advanced actuator assembly replaces traditional mechanical throttle linkage systems with modern electronic throttle control, delivering precise throttle operation, improved drivability and seamless integration with modern engine management systems.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93

As performance engine builds continue to embrace electronic fuel injection and advanced ECU technology, drive-by-wire systems have become increasingly popular due to their ability to provide highly accurate throttle control, programmable throttle mapping and enhanced engine management capabilities.

For Porsche enthusiasts upgrading to a Rennen by JSR ITB system, the DBW actuator assembly provides a professional solution that combines modern control technology with the exhilarating throttle response and induction characteristics of individual throttle bodies.

What Does a Drive By Wire Actuator Assembly Do?

A Drive By Wire actuator electronically controls throttle opening based on driver input from the accelerator pedal rather than using a traditional cable-operated throttle linkage.

The actuator receives commands from the ECU and precisely controls throttle position to optimise engine response and performance.

Key functions include:

• Electronic throttle control
• Precise throttle positioning
• ECU integration
• Programmable throttle mapping
• Improved throttle response
• Enhanced engine management functionality
• Consistent throttle operation

This technology allows greater flexibility in engine calibration while improving overall drivability.

Why Is an ITB Upgrade So Appealing?

Individual Throttle Body systems remain one of the most desirable naturally aspirated performance upgrades available for Porsche engines.

Unlike conventional intake systems, each cylinder receives airflow through its own dedicated throttle body, reducing intake restrictions and dramatically improving responsiveness.

Benefits of a Rennen by JSR ITB upgrade include:

• Instant throttle response
• Improved airflow efficiency
• Enhanced engine breathing
• Increased performance potential
• Greater tuning flexibility
• Improved driver engagement
• Distinctive induction sound
• Motorsport-inspired driving experience

The combination of ITBs and Drive By Wire technology delivers modern engine control while retaining the raw character and responsiveness enthusiasts seek.

Why Install a Drive By Wire Actuator?

Modern electronic throttle control provides significant advantages over traditional cable-operated systems.

Benefits include:

• More accurate throttle control
• Smooth throttle transitions
• Customisable throttle maps
• Improved ECU integration
• Enhanced drivability
• Simplified installation in EFI conversions
• Compatibility with advanced engine management features
• Improved reliability and consistency

For performance builds, a DBW actuator can unlock advanced tuning strategies that are difficult to achieve with conventional throttle linkages.

Description

The MD35 ECU is a programmable engine management system that can be used as an independent Engine Control Unit (ECU) for virtually all types of gasoline engines, or in combination with a standard engine management system.

This system is equipped with a 38 channel data logging feature to enable professional style development of your vehicle. 

The MD35 can take over the standard injection/ignition at any desired engine speed, boost pressure or throttle valve position.

The MA5 works with all KMS accessories & components. Activate for instance one of the key features, a complete self-learning air to fuel ratio control (lambda control) with the KMS Uego CAN controller set to. Precise ignition and air/fuel mixture control will lead to excellent drivability, performance and low fuel consumption.

• Controls up to 10 cylinders 
• USB C communication
• Inputs protected up to 50V
• Water-resistant Aluminum housing
• Engine diagnostics
• CAN-bus
• Shortcut protected outputs
• Idle control
• RPM limiter (launch control, pit limiter)
• ALS (anti lag system)
• Boost control
• 2 different engine load inputs
• 1 configurable analog input
• 1 selectable digital input 
• 3 auxiliary 
• Weight 333g

Description

The MD35 ECU is a programmable engine management system that can be used as an independent Engine Control Unit (ECU) for virtually all types of gasoline engines, or in combination with a standard engine management system.

This system is equipped with a 38 channel data logging feature to enable professional style development of your vehicle. 

The MD35 can take over the standard injection/ignition at any desired engine speed, boost pressure or throttle valve position.
A complete self learning air to fuel ratio control (lambda control) is one of the key features of the KMS MD35 ECU. The lambda control is used in combination with the KMS Uego CAN controller set. Precise ignition and air/fuel mixture control will lead to excellent drivability, performance and low fuel consumption.

Included within the KMS MD35 ECU package is the main connector, communication cable and wiring diagram. All necessary software, firmware and manuals are available on our website. The KMS MD35 wiring loom set is sold separately.

Features:
• Complete engine management system up to 12 cylinders
• Dual self-learning lambda control in combination with KMS UEGO CAN controllers
• Odd firing angles
• Direct fire in combination with cam-sensor
• Inductive / Hall crank trigger
• Staged / Banked injection
• Map selector
• Engine diagnostics
• Shortcut protected outputs
• 38 channel 4Mb data logging
• Dual processor technology
• Water resistant
• Connector with gold-plated pins
• USB interface
• CAN communication (used for extra in-/outputs, KMS CAN display, etc.)
• 2 engine load sensors
• 3 analog inputs (2nd lambda, gearbox position, G-force sensor, EGT, etc.)
• 3 auxiliary outputs (Shift light, water-injection, cooling fan, etc.)
• Pit lane and speed limiter (variable)
• RPM limiter
• Anti Lag System (variable)
• Powershift (separate delay and cut-off time for each gear)
• Boost control (gear, speed and time-dependent)
• Launch control (variable, separate time delay possible)
• Idle control
• Speed inputs from external KMS speed sensor >CAN converter 4-channel
• Traction control

Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.

This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.

Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:

• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.

you will need an EFI Installation & control kit which is not included

**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided

Description

The Electronic Throttle Control (ETC) is a powerful and reliable system for the control of electronic throttle valves in various applications. It enables users to control electronic throttle valves, stand-alone or in cooperation with an engine control unit. The system uses a powerful PID algorithm to ensure that the electronic throttle valve will be reacting, under all circumstances, within a few milliseconds.

It allows users to get the full potential from the electronic throttle valve with functions like RPM limiter, Anti Lag (ALS) control, launch control, pedal response, throttle blip and many more. The KMS ETC module has an extensive automatic calibration process which enables a reliable use of the system within a few minutes.

Included within the KMS ETC package is a wiring loom main connector, communication cable and wiring diagram.

Features:

• Suitable for all electronic throttle valves
• Stand-alone use or in cooperation with other ECU’s
• CAN-communication with KMS ECU
• Water resistant
• Powerful PID algorithm
• User-friendly software
• Automatic calibration
• Static RPM (idle) control
• Anti Lag (ALS) control
• Launch control
• Pit lane speed limiter
• RPM limiter
• Throttle valve characteristics mapping
• Throttle-blip for downshift

Sizes Porsche 911 intake manifolds
Carburetor/Bosch MFI Ø32mm engine side - Ø40mm ITB side. Recommended for early 2.0ltr / 2.2ltr engines

Injectors options that can be used - 260cc / 300cc / 380cc / 420cc / 480cc / 520cc

This is a direct replacement kit for replacing carburetors while keeping the OEM look in your engine bay. 

The intake manifolds and riser plates are manufactured out of a single piece of 6082 aluminum and come in 2 styles. These differ in design due to the shape of the mounting flange for the cylinder head. The intake manifold can be used as replacement parts for the OEM part when damaged or has to be replaced*.
The ITBs are manufactured out of cast aluminum, whist the fuel rails are made out of aluminum 6060 extrusion profile and come with AN6 ORB connection for the fuel lines. The direct mount fuel pressure regulator is directly mounted to the fuel rails, so in this case you don’t need to drill additional holes in the engine bay for mounting a fuel pressure regulator.
The throttle linkage and all mounting hardware is made from stainless steel and the pivoting point of the throttle linkage is a ball and socket design for smooth operation. The levers allow you to adjust and finetune mechanical movement of the ITBs

The dimensions of the assembly are the same as the OEM carburetor setup and the riser plate comes with same mounting holes as the OEM carburetors, in this way you are able to use the OEM air filter box and OEM airhorns. Also the riser plates come with mounting options for an air intake temperature sensor, this is nicely hidden away between the ITBs. The diameter for the ITBs in the riser plate is 45mm. There is also an option for using airhorns, In this case you don’t need the riser plates.

The crank sensor and trigger wheel kit are additional and this type of kit is needed when using ITBs like these. Besides switching to ITBs you will need a stand alone ECU to get the fuel injection to work. Our kit only works with engines like the 3.0ltr that came with a “ big distributor”. You can leave the distributor or you can remove this unit when you are going to use a discoil type of ignition. In for case an adapter is included in the crank sensor kit. The pulley comes in 2 dimensions to choose from, a Ø116mm pulley and Ø126,5mm pulley.

Fuel injectors, fuel lines, standalone ECU, wiring harness are NOT included in the kit.

*In case of using as a replacement part 3 mounting holes for the carburetors or ITBs need to be re thread with a timesert or helicoil. Otherwise it is impossible to mount a threaded stud.

Kit Includes
2 x Full billet, hard anodised intake manifolds
6 x ITB complete with lever assembly
6 x Airhorns 45mmØx30mm
2 x Fuel rail with mounting hardware
1 x Throttle linkage with 2 throttle connection rods
1 x Direct mount fuel pressure regulator
2 x Riser plates with 1 air temperature sensor (for use with OEM air filter box)
1 x Crank sensor and trigger wheel kit (optional)
All needed gaskets and mounting hardware.

Sizes Porsche 911 intake manifolds
Carburetor/Bosch MFI Ø34mm engine side - Ø40mm ITB side. Recommended for early 2.7ltr engines

Injectors options that can be used - 260cc / 300cc / 380cc / 420cc / 480cc / 520cc

This is a direct replacement kit for replacing carburetors while keeping the OEM look in your engine bay. 

The intake manifolds and riser plates are manufactured out of a single piece of 6082 aluminum and come in 2 styles. These differ in design due to the shape of the mounting flange for the cylinder head. The intake manifold can be used as replacement parts for the OEM part when damaged or has to be replaced*.
The ITBs are manufactured out of cast aluminum, whist the fuel rails are made out of aluminum 6060 extrusion profile and come with AN6 ORB connection for the fuel lines. The direct mount fuel pressure regulator is directly mounted to the fuel rails, so in this case you don’t need to drill additional holes in the engine bay for mounting a fuel pressure regulator.
The throttle linkage and all mounting hardware is made from stainless steel and the pivoting point of the throttle linkage is a ball and socket design for smooth operation. The levers allow you to adjust and finetune mechanical movement of the ITBs

The dimensions of the assembly are the same as the OEM carburetor setup and the riser plate comes with same mounting holes as the OEM carburetors, in this way you are able to use the OEM air filter box and OEM airhorns. Also the riser plates come with mounting options for an air intake temperature sensor, this is nicely hidden away between the ITBs. The diameter for the ITBs in the riser plate is 45mm. There is also an option for using airhorns, In this case you don’t need the riser plates.

The crank sensor and trigger wheel kit are additional and this type of kit is needed when using ITBs like these. Besides switching to ITBs you will need a stand alone ECU to get the fuel injection to work. Our kit only works with engines like the 3.0ltr that came with a “ big distributor”. You can leave the distributor or you can remove this unit when you are going to use a discoil type of ignition. In for case an adapter is included in the crank sensor kit. The pulley comes in 2 dimensions to choose from, a Ø116mm pulley and Ø126,5mm pulley.

Fuel injectors, fuel lines, standalone ECU, wiring harness are NOT included in the kit.

*In case of using as a replacement part 3 mounting holes for the carburetors or ITBs need to be re thread with a timesert or helicoil. Otherwise it is impossible to mount a threaded stud.

Kit Includes
2 x Full billet, hard anodised intake manifolds
6 x ITB complete with lever assembly
6 x Airhorns 45mmØx30mm
2 x Fuel rail with mounting hardware
1 x Throttle linkage with 2 throttle connection rods
1 x Direct mount fuel pressure regulator
2 x Riser plates with 1 air temperature sensor (for use with OEM air filter box)
1 x Crank sensor and trigger wheel kit (optional)
All needed gaskets and mounting hardware.

Sizes Porsche 911 intake manifolds
Bosch injection system Ø39mm engine side - Ø42mm ITB side. Recommended for 3.0ltr engines
Bosch injection system Ø41mm engine side - Ø45mm ITB side. Recommended for custom set-ups or tuned engines
Bosch injection system Ø42mm engine side - Ø45mm ITB side. Recommended for custom set-ups or tuned engines

Injectors options that can be used - 260cc / 300cc / 380cc / 420cc / 480cc / 520cc

This is a direct replacement kit for replacing carburetors while keeping the OEM look in your engine bay. 

The intake manifolds and riser plates are manufactured out of a single piece of 6082 aluminum and come in 2 styles. These differ in design due to the shape of the mounting flange for the cylinder head. The intake manifold can be used as replacement parts for the OEM part when damaged or has to be replaced*.
The ITBs are manufactured out of cast aluminum, whist the fuel rails are made out of aluminum 6060 extrusion profile and come with AN6 ORB connection for the fuel lines. The direct mount fuel pressure regulator is directly mounted to the fuel rails, so in this case you don’t need to drill additional holes in the engine bay for mounting a fuel pressure regulator.
The throttle linkage and all mounting hardware is made from stainless steel and the pivoting point of the throttle linkage is a ball and socket design for smooth operation. The levers allow you to adjust and finetune mechanical movement of the ITBs

The dimensions of the assembly are the same as the OEM carburetor setup and the riser plate comes with same mounting holes as the OEM carburetors, in this way you are able to use the OEM air filter box and OEM airhorns. Also the riser plates come with mounting options for an air intake temperature sensor, this is nicely hidden away between the ITBs. The diameter for the ITBs in the riser plate is 45mm. There is also an option for using airhorns, In this case you don’t need the riser plates.

The crank sensor and trigger wheel kit are additional and this type of kit is needed when using ITBs like these. Besides switching to ITBs you will need a stand alone ECU to get the fuel injection to work. Our kit only works with engines like the 3.0ltr that came with a “ big distributor”. You can leave the distributor or you can remove this unit when you are going to use a discoil type of ignition. In for case an adapter is included in the crank sensor kit. The pulley comes in 2 dimensions to choose from, a Ø116mm pulley and Ø126,5mm pulley.

Fuel injectors, fuel lines, standalone ECU, wiring harness are NOT included in the kit.

*In case of using as a replacement part 3 mounting holes for the carburetors or ITBs need to be re thread with a timesert or helicoil. Otherwise it is impossible to mount a threaded stud.

Kit Includes
2 x full billet, hard anodised intake manifolds
6 x ITB complete with lever assembly
6 x airhorns 45mmØx30mm
2 x fuel rail with mounting hardware
1 x throttle linkage with 2 throttle connection rods
1 x Direct mount fuel pressure regulator
2 x riser plates with 1 air temperature sensor (for use with OEM air filter box)
1 x crank sensor and trigger wheel kit (optional)
All needed gaskets and mounting hardware.

Descriptiion

The Idle control kit can be used with our ECU to control the idle speed.

Can be used with
KMS.06.001 - MA 5 ECU
KMS.01.001 - MD 35 ECU

Rennen ITG Air Filter Assembly - Normal for Rennen by JSR Individual Barrel Throttle Body Upgrades

The Rennen ITG Air Filter Assembly - Normal is a complete induction filtration package designed specifically for use with Rennen by JSR Individual Barrel Throttle Body (ITB) systems. The kit includes premium ITG foam air filters together with the required mounting and securing hardware for installation directly onto the Rennen velocity stacks.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93

While Individual Throttle Bodies dramatically improve airflow, throttle response and engine performance, they also require effective filtration to protect the engine from dust, dirt and airborne contaminants. The Rennen ITG Air Filter Assembly provides this protection while maintaining the unrestricted airflow characteristics that make Barrel ITB conversions so desirable.

Designed to integrate seamlessly with the Rennen by JSR induction system, this filter assembly offers an excellent balance between airflow, filtration efficiency and engine protection, making it ideal for fast road, touring and occasional track use.

What Does the ITG Air Filter Assembly Do?

The ITG Air Filter Assembly protects the engine by filtering incoming air before it enters the throttle bodies and combustion chambers.

Its primary functions include:

• Preventing dirt ingestion
• Protecting cylinders and piston rings
• Protecting valves and valve seats
• Maintaining clean airflow
• Supporting engine longevity
• Preserving performance
• Reducing engine wear

The filters allow the engine to breathe freely while preventing harmful contaminants from entering the intake system.

Why Are Air Filters Essential on ITB Systems?

Individual Throttle Bodies are designed to maximise airflow and engine response. Without air filters, debris and contaminants can be drawn directly into the engine.

Proper filtration helps:

• Protect expensive engine components
• Prevent premature cylinder wear
• Maintain engine reliability
• Reduce intake contamination
• Support consistent tuning
• Preserve airflow characteristics
• Improve long-term performance

For road-driven vehicles, filtration should always be considered an essential part of any ITB installation.

Why Choose ITG Foam Filters?

ITG filters are widely recognised throughout motorsport and performance automotive applications for their excellent combination of airflow and filtration efficiency.

Benefits include:

• High airflow capacity
• Excellent filtration performance
• Lightweight construction
• Washable and reusable design
• Motorsport-proven technology
• Long service life
• Consistent airflow characteristics
• Ideal for high-performance engines

The foam filter construction allows superior airflow while maintaining effective protection against airborne contaminants.

Why Are Barrel ITB Upgrades So Popular?

Rennen by JSR Barrel Throttle Bodies provide one of the most exciting induction upgrades available for Porsche engines.

Benefits include:

• Instant throttle response
• Improved airflow efficiency
• Enhanced engine breathing
• Increased power potential
• Exceptional induction sound
• Improved driver engagement
• Greater tuning flexibility
• Stunning engine bay appearance

The addition of the ITG Air Filter Assembly ensures these performance gains can be enjoyed while maintaining essential engine protection.

Why Choose the Rennen ITG Air Filter Assembly?

This kit has been developed specifically to work with Rennen by JSR Barrel ITB systems and velocity stacks.

Benefits include:

• Complete filtration solution
• Includes ITG foam filters
• Includes mounting and securing hardware
• Direct fitment to velocity stacks
• Maintains unrestricted airflow
• Protects engine internals
• Suitable for road and track applications
• Professional installation finish       

Rennen ITG Air Filter Assembly - Rally for Rennen by JSR Individual Barrel Throttle Body Upgrades

The Rennen ITG Air Filter Assembly - Rally is the ultimate filtration solution for Rennen by JSR Individual Barrel Throttle Body (ITB) conversions. Designed for demanding road, rally, touring and motorsport applications, this upgraded filtration package combines premium ITG foam filters with enhanced sealing technology and dedicated mounting hardware to provide superior engine protection in dusty and challenging operating environments.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93

Like the standard ITG Air Filter Assembly, the Rally version includes high-performance ITG foam filters and all the required hardware for secure installation onto the velocity stacks. However, the Rally specification takes protection one step further with a more robust construction and improved sealing against airborne dust and contaminants.

For owners operating their Porsche in rally, endurance, touring or harsh road conditions, the Rally Air Filter Assembly provides additional peace of mind without compromising the airflow and throttle response benefits of the Rennen by JSR Barrel ITB system.

What Does the Rally ITG Air Filter Assembly Do?

The Rally Air Filter Assembly filters incoming air before it enters the throttle bodies and combustion chambers.

Its primary functions include:

• Preventing dust ingestion
• Protecting cylinders and piston rings
• Protecting valves and valve seats
• Reducing intake contamination
• Supporting engine longevity
• Maintaining airflow efficiency
• Preserving engine performance

The enhanced sealing design provides an additional layer of protection in environments where airborne dust and debris are more prevalent.

Why Are Air Filters Essential on ITB Systems?

Individual Throttle Bodies significantly increase airflow potential and engine responsiveness. However, without effective filtration, harmful particles can enter the engine and cause accelerated wear.

Proper air filtration helps:

• Protect expensive engine components
• Reduce internal engine wear
• Maintain tuning consistency
• Protect piston rings and cylinder bores
• Improve long-term reliability
• Preserve engine performance
• Reduce maintenance costs

For road and motorsport applications alike, high-quality air filtration should always be considered an essential part of any ITB installation.

Why Choose the Rally Version?

The Rally Air Filter Assembly has been developed for environments where maximum engine protection is required.

Compared to the standard filter assembly, the Rally version offers:

• Improved sealing against dust ingress
• More robust filter mounting arrangement
• Enhanced durability
• Greater protection in harsh environments
• Improved filtration security during prolonged use
• Ideal for rally, touring and endurance applications
• Additional confidence for high-value performance engines

This makes it the preferred option for owners seeking maximum engine protection without sacrificing performance.

Why Choose ITG Foam Filters?

ITG filters are widely respected throughout motorsport and performance automotive applications for their ability to combine high airflow with exceptional filtration efficiency.

Benefits include:

• High airflow capacity
• Excellent filtration performance
• Washable and reusable design
• Lightweight construction
• Motorsport-proven technology
• Long service life
• Consistent airflow characteristics
• Suitable for high-performance engines

The foam construction provides outstanding protection while supporting the airflow demands of Individual Throttle Body systems.

Why Are Barrel ITB Upgrades So Popular?

Rennen by JSR Barrel Throttle Bodies provide one of the most exciting induction upgrades available for Porsche engines.

Benefits include:

• Instant throttle response
• Improved airflow efficiency
• Increased engine breathing capacity
• Greater power potential
• Enhanced torque delivery
• Exceptional induction sound
• Motorsport-inspired driving experience
• Stunning engine bay presentation

The Rally Air Filter Assembly ensures these benefits can be enjoyed while providing enhanced protection for valuable performance engines.

Why Choose the Rennen ITG Rally Air Filter Assembly?

Developed specifically for Rennen by JSR Barrel ITB systems, this filtration package offers the ideal balance between airflow, protection and durability.

Benefits include:

• Enhanced dust sealing
• Premium ITG filtration technology
• Complete installation solution
• Includes mounting and securing hardware
• Maintains unrestricted airflow
• Protects engine internals
• Suitable for road, rally and motorsport use
• Professional installation finish       

Description

The Lambda UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) CAN controller is a highly advanced broadband lambda controller designed for a Bosch LSU 4.9 broadband lambda probe. The sensor measures the oxygen level in the exhaust at a rate of 2000 samples/sec and converts this to a lambda value.

Connecting the KMS Lambda UEGO CAN controller is very easy thanks to the supplied wiring harness. The wiring harness contains the connections for the lambda probe, ground, analog output and CAN-bus output with which the controller can communicate.

A complete set for use with our MD35 or MP25 , the set includes:

• Lambda controller
• Wiring
• Superseal connector 3-pin
• 0,5m Canbus connection cable
• Weldbung
• 4.9 Bosch lambda probe
• Instruction manual

Features:

• Independent use with our KMS CAN displays
• Suitable for all types of fuel (gasoline, diesel, E85, methanol, etc.)
• Uses a modern Bosch LSU 4.9 broadband lambda sensor
• Analog and CAN communication
• Operating range from 0.65 to 1.5 Lambda (9.5 to 22.1 Air/fuel ratio)
• Controlled temperature of the lambda probe from 810°C ±10°C
• High sample rate of 2000Hz
• LED light on the housing for easy troubleshooting
• Water resistant
• Compact design